summaryrefslogtreecommitdiff
path: root/setup.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-22worktree: add per-worktree config filesLibravatar Nguyễn Thái Ngọc Duy1-8/+32
A new repo extension is added, worktreeConfig. When it is present: - Repository config reading by default includes $GIT_DIR/config _and_ $GIT_DIR/config.worktree. "config" file remains shared in multiple worktree setup. - The special treatment for core.bare and core.worktree, to stay effective only in main worktree, is gone. These config settings are supposed to be in config.worktree. This extension is most useful in multiple worktree setup because you now have an option to store per-worktree config (which is either .git/config.worktree for main worktree, or .git/worktrees/xx/config.worktree for linked ones). This extension can be used in single worktree mode, even though it's pretty much useless (but this can happen after you remove all linked worktrees and move back to single worktree). "git config" reads from both "config" and "config.worktree" by default (i.e. without either --user, --file...) when this extension is present. Default writes still go to "config", not "config.worktree". A new option --worktree is added for that (*). Since a new repo extension is introduced, existing git binaries should refuse to access to the repo (both from main and linked worktrees). So they will not misread the config file (i.e. skip the config.worktree part). They may still accidentally write to the config file anyway if they use with "git config --file <path>". This design places a bet on the assumption that the majority of config variables are shared so it is the default mode. A safer move would be default writes go to per-worktree file, so that accidental changes are isolated. (*) "git config --worktree" points back to "config" file when this extension is not present and there is only one worktree so that it works in any both single and multiple worktree setups. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-06Replace all die("BUG: ...") calls by BUG() onesLibravatar Johannes Schindelin1-2/+2
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro was introduced to use for reporting bugs instead of die(). It was then subsequently used to convert one single caller in 588a538ae55 (setup_git_env: convert die("BUG") to BUG(), 2017-05-12). The cover letter of the patch series containing this patch (cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not terribly clear why only one call site was converted, or what the plan is for other, similar calls to die() to report bugs. Let's just convert all remaining ones in one fell swoop. This trick was performed by this invocation: sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-25Merge branch 'jk/relative-directory-fix'Libravatar Junio C Hamano1-6/+3
Some codepaths, including the refs API, get and keep relative paths, that go out of sync when the process does chdir(2). The chdir-notify API is introduced to let these codepaths adjust these cached paths to the new current directory. * jk/relative-directory-fix: refs: use chdir_notify to update cached relative paths set_work_tree: use chdir_notify add chdir-notify API trace.c: export trace_setup_key set_git_dir: die when setenv() fails
2018-04-10Merge branch 'nd/remove-ignore-env-field'Libravatar Junio C Hamano1-2/+1
Code clean-up for the "repository" abstraction. * nd/remove-ignore-env-field: repository.h: add comment and clarify repo_set_gitdir repository: delete ignore_env member sha1_file.c: move delayed getenv(altdb) back to setup_git_env() repository.c: delete dead functions repository.c: move env-related setup code back to environment.c repository: initialize the_repository in main()
2018-03-30set_work_tree: use chdir_notifyLibravatar Jeff King1-6/+3
When we change to the top of the working tree, we manually re-adjust $GIT_DIR and call set_git_dir() again, in order to update any relative git-dir we'd compute earlier. Instead of the work-tree code having to know to call the git-dir code, let's use the new chdir_notify interface. There are two spots that need updating, with a few subtleties in each: 1. the set_git_dir() code needs to chdir_notify_register() so it can be told when to update its path. Technically we could push this down into repo_set_gitdir(), so that even repository structs besides the_repository could benefit from this. But that opens up a lot of complications: - we'd still need to touch set_git_dir(), because it does some other setup (like setting $GIT_DIR in the environment) - submodules using other repository structs get cleaned up, which means we'd need to remove them from the chdir_notify list - it's unlikely to fix any bugs, since we shouldn't generally chdir() in the middle of working on a submodule 2. setup_work_tree now needs to call chdir_notify(), and can lose its manual set_git_dir() call. Note that at first glance it looks like this undoes the absolute-to-relative optimization added by 044bbbcb63 (Make git_dir a path relative to work_tree in setup_work_tree(), 2008-06-19). But for the most part that optimization was just _undoing_ the relative-to-absolute conversion which the function was doing earlier (and which is now gone). It is true that if you already have an absolute git_dir that the setup_work_tree() function will no longer make it relative as a side effect. But: - we generally do have relative git-dir's due to the way the discovery code works - if we really care about making git-dir's relative when possible, then we should be relativizing them earlier (e.g., when we see an absolute $GIT_DIR we could turn it relative, whether we are going to chdir into a worktree or not). That would cover all cases, including ones that 044bbbcb63 did not. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-05repository.c: move env-related setup code back to environment.cLibravatar Nguyễn Thái Ngọc Duy1-2/+1
It does not make sense that generic repository code contains handling of environment variables, which are specific for the main repository only. Refactor repo_set_gitdir() function to take $GIT_DIR and optionally _all_ other customizable paths. These optional paths can be NULL and will be calculated according to the default directory layout. Note that some dead functions are left behind to reduce diff noise. They will be deleted in the next patch. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-27Merge branch 'as/ll-i18n'Libravatar Junio C Hamano1-31/+31
Some messages in low level start-up codepath have been i18n-ized. * as/ll-i18n: Mark messages for translations
2018-02-13Merge branch 'jh/fsck-promisors'Libravatar Junio C Hamano1-1/+6
In preparation for implementing narrow/partial clone, the machinery for checking object connectivity used by gc and fsck has been taught that a missing object is OK when it is referenced by a packfile specially marked as coming from trusted repository that promises to make them available on-demand and lazily. * jh/fsck-promisors: gc: do not repack promisor packfiles rev-list: support termination at promisor objects sha1_file: support lazily fetching missing objects introduce fetch-object: fetch one promisor object index-pack: refactor writing of .keep files fsck: support promisor objects as CLI argument fsck: support referenced promisor objects fsck: support refs pointing to promisor objects fsck: introduce partialclone extension extension.partialclone: introduce partial clone extension
2018-02-13Mark messages for translationsLibravatar Alexander Shopov1-31/+31
Small changes in messages to fit the style and typography of rest. Reuse already translated messages if possible. Do not translate messages aimed at developers of git. Fix unit tests depending on the original string. Use `test_i18ngrep` for tests with translatable strings. Change and verify rest of tests via `make GETTEXT_POISON=1 test`. Signed-off-by: Alexander Shopov <ash@kambanaria.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-19Merge branch 'sg/setup-doc-update'Libravatar Junio C Hamano1-1/+1
Comment update. * sg/setup-doc-update: setup.c: fix comment about order of .git directory discovery
2017-12-07setup.c: fix comment about order of .git directory discoveryLibravatar SZEDER Gábor1-1/+1
Since gitfiles were introduced in b44ebb19e (Add platform-independent .git "symlink", 2008-02-20) the order of checks during .git directory discovery is: gitfile, gitdir, bare repo. However, that commit did only partially update the in-code comment describing this order, missing the last line which still puts gitdir before gitfile. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-05extension.partialclone: introduce partial clone extensionLibravatar Jonathan Tan1-1/+6
Introduce new repository extension option: `extensions.partialclone` See the update to Documentation/technical/repository-version.txt in this patch for more information. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-13Integrate hash algorithm support with repo setupLibravatar brian m. carlson1-0/+3
In future versions of Git, we plan to support an additional hash algorithm. Integrate the enumeration of hash algorithms with repository setup, and store a pointer to the enumerated data in struct repository. Of course, we currently only support SHA-1, so hard-code this value in read_repository_format. In the future, we'll enumerate this value from the configuration. Add a constant, the_hash_algo, which points to the hash_algo structure pointer in the repository global. Note that this is the hash which is used to serialize data to disk, not the hash which is used to display items to the user. The transition plan anticipates that these may be different. We can add an additional element in the future (say, ui_hash_algo) to provide for this case. Include repository.h in cache.h since we now need to have access to these struct and variable definitions. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-13setup: expose enumerated repo infoLibravatar brian m. carlson1-21/+25
We enumerate several different items as part of struct repository_format, but then actually set up those values using the global variables we've initialized from them. Instead, let's pass a pointer to the structure down to the code where we enumerate these values, so we can later on use those values directly to perform setup. This technique makes it easier for us to determine additional items about the repository format (such as the hash algorithm) and then use them for setup later on, without needing to add additional global variables. We can't avoid using the existing global variables since they're intricately intertwined with how things work at the moment, but this improves things for the future. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-09Merge branch 'js/early-config'Libravatar Junio C Hamano1-1/+3
Correct start-up sequence so that a repository could be placed immediately under the root directory again (which was broken at around Git 2.13). * js/early-config: setup: avoid double slashes when looking for HEAD
2017-11-03setup: avoid double slashes when looking for HEADLibravatar Jeff King1-1/+3
Andrew Baumann reported that when called outside of any Git worktree, `git rev-parse --is-inside-work-tree` eventually tries to access `//HEAD`, i.e. any `HEAD` file in the root directory, but with a double slash. This double slash is not only unintentional, but is allowed by the POSIX standard to have a special meaning. And most notably on Windows, it does, where it refers to a UNC path of the form `//server/share/`. As a consequence, afore-mentioned `rev-parse` call not only looks for the wrong thing, but it also causes serious delays, as Windows will try to access a server called `HEAD`. Let's simply avoid the unintended double slash. Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-07Merge branch 'ks/verify-filename-non-option-error-message-tweak'Libravatar Junio C Hamano1-1/+1
Error message tweak. * ks/verify-filename-non-option-error-message-tweak: setup: update error message to be more meaningful
2017-10-04setup: update error message to be more meaningfulLibravatar Kaartic Sivaraam1-1/+1
The error message shown when a flag is found when expecting a filename wasn't clear as it didn't communicate what was wrong using the 'suitable' words in *all* cases. $ git ls-files README.md test-file Correct case, $ git rev-parse README.md --flags README.md --flags fatal: bad flag '--flags' used after filename Incorrect case, $ git grep "some random regex" -n fatal: bad flag '-n' used after filename The above case is incorrect as "some random regex" isn't a filename in this case. Change the error message to be general and communicative. This results in the following output, $ git rev-parse README.md --flags README.md --flags fatal: option '--flags' must come before non-option arguments $ git grep "some random regex" -n fatal: option '-n' must come before non-option arguments Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-27read_gitfile_gently: clarify return value ownership.Libravatar Han-Wen Nienhuys1-1/+2
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-06set_git_dir: handle feeding gitdir to itselfLibravatar Jeff King1-5/+0
Ideally we'd free the existing gitdir field before assigning the new one, to avoid a memory leak. But we can't do so safely because some callers do the equivalent of: set_git_dir(get_git_dir()); We can detect that case as a noop, but there are even more complicated cases like: set_git_dir(remove_leading_path(worktree, get_git_dir()); where we really do need to do some work, but the original string must remain valid. Rather than put the burden on callers to make a copy of the string (only to free it later, since we'll make a copy of it ourselves), let's solve the problem inside set_git_dir(). We can make a copy of the pointer for the old gitdir, and then avoid freeing it until after we've made our new copy. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-02grep: recurse in-process using 'struct repository'Libravatar Brandon Williams1-11/+1
Convert grep to use 'struct repository' which enables recursing into submodules to be handled in-process. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-23environment: place key repository state in the_repositoryLibravatar Brandon Williams1-2/+15
Migrate 'git_dir', 'git_common_dir', 'git_object_dir', 'git_index_file', 'git_graft_file', and 'namespace' to be stored in 'the_repository'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-23setup: add comment indicating a hackLibravatar Brandon Williams1-0/+6
'GIT_TOPLEVEL_PREFIX_ENVIRONMENT' was added in (b58a68c1c setup: allow for prefix to be passed to git commands) to aid in fixing a bug where 'ls-files' and 'grep' were not able to properly recurse when called from within a subdirectory. Add a 'NEEDSWORK' comment indicating that this envvar should be removed once 'ls-files' and 'grep' can recurse in-process. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-23setup: don't perform lazy initialization of repository stateLibravatar Brandon Williams1-0/+14
Under some circumstances (bogus GIT_DIR value or the discovered gitdir is '.git') 'setup_git_directory()' won't initialize key repository state. This leads to inconsistent state after running the setup code. To account for this inconsistent state, lazy initialization is done once a caller asks for the repository's gitdir or some other piece of repository state. This is confusing and can be error prone. Instead let's tighten the expected outcome of 'setup_git_directory()' and ensure that it initializes repository state in all cases that would have been handled by lazy initialization. This also lets us drop the requirement to have 'have_git_dir()' check if the environment variable GIT_DIR was set as that will be handled by the end of the setup code. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-23Merge branches 'bw/ls-files-sans-the-index' and 'bw/config-h' into ↵Libravatar Junio C Hamano1-6/+13
bw/repo-object * bw/ls-files-sans-the-index: ls-files: factor out tag calculation ls-files: factor out debug info into a function ls-files: convert show_files to take an index ls-files: convert show_ce_entry to take an index ls-files: convert prune_cache to take an index ls-files: convert ce_excluded to take an index ls-files: convert show_ru_info to take an index ls-files: convert show_other_files to take an index ls-files: convert show_killed_files to take an index ls-files: convert write_eolinfo to take an index ls-files: convert overlay_tree_on_cache to take an index tree: convert read_tree to take an index parameter convert: convert renormalize_buffer to take an index convert: convert convert_to_git to take an index convert: convert convert_to_git_filter_fd to take an index convert: convert crlf_to_git to take an index convert: convert get_cached_convert_stats_ascii to take an index * bw/config-h: config: don't implicitly use gitdir or commondir config: respect commondir setup: teach discover_git_directory to respect the commondir config: don't include config.h by default config: remove git_config_iter config: create config.h alias: use the early config machinery to expand aliases t7006: demonstrate a problem with aliases in subdirectories t1308: relax the test verifying that empty alias values are disallowed help: use early config when autocorrecting aliases config: report correct line number upon error discover_git_directory(): avoid setting invalid git_dir
2017-06-19Merge branch 'jk/pathspec-magic-disambiguation'Libravatar Junio C Hamano1-10/+32
The convention for a command line is to follow "git cmdname --options" with revisions followed by an optional "--" disambiguator and then finally pathspecs. When "--" is not there, we make sure early ones are all interpretable as revs (and do not look like paths) and later ones are the other way around. A pathspec with "magic" (e.g. ":/p/a/t/h" that matches p/a/t/h from the top-level of the working tree, no matter what subdirectory you are working from) are conservatively judged as "not a path", which required disambiguation more often. The command line parser learned to say "it's a pathspec" a bit more often when the syntax looks like so. * jk/pathspec-magic-disambiguation: verify_filename(): flip order of checks verify_filename(): treat ":(magic)" as a pathspec check_filename(): handle ":^" path magic check_filename(): use skip_prefix check_filename(): refactor ":/" handling t4208: add check for ":/" without matching file
2017-06-15setup: teach discover_git_directory to respect the commondirLibravatar Brandon Williams1-6/+11
Currently 'discover_git_directory' only looks at the gitdir to determine if a git directory was discovered. This causes a problem in the event that the gitdir which was discovered was in fact a per-worktree git directory and not the common git directory. This is because the repository config, which is checked to verify the repository's format, is stored in the commondir and not in the per-worktree gitdir. Correct this behavior by checking the config stored in the commondir. It will also be of use for callers to have access to the commondir, so lets also return that upon successfully discovering a git directory. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15config: don't include config.h by defaultLibravatar Brandon Williams1-0/+1
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15discover_git_directory(): avoid setting invalid git_dirLibravatar Johannes Schindelin1-0/+1
When discovering a .git/ directory, we take pains to ensure that its repository format version matches Git's expectations, and we return NULL otherwise. However, we still appended the invalid path to the strbuf passed as argument. Let's just reset the strbuf to the state before we appended the .git/ directory that was eventually rejected. There is another early return path in that function, when setup_git_directory_gently_1() returns GIT_DIR_NONE or an error. In that case, the gitdir parameter has not been touched, therefore there is no need for an equivalent change in that code path. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-13Merge branch 'jc/noent-notdir'Libravatar Junio C Hamano1-1/+1
Our code often opens a path to an optional file, to work on its contents when we can successfully open it. We can ignore a failure to open if such an optional file does not exist, but we do want to report a failure in opening for other reasons (e.g. we got an I/O error, or the file is there, but we lack the permission to open). The exact errors we need to ignore are ENOENT (obviously) and ENOTDIR (less obvious). Instead of repeating comparison of errno with these two constants, introduce a helper function to do so. * jc/noent-notdir: treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checked compat-util: is_missing_file_error()
2017-05-30treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checkedLibravatar Junio C Hamano1-1/+1
Using the is_missing_file_error() helper introduced in the previous step, update all hits from $ git grep -e ENOENT --and -e ENOTDIR There are codepaths that only check ENOENT, and it is possible that some of them should be checking both. Updating them is kept out of this step deliberately, as we do not want to change behaviour in this step. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-29verify_filename(): flip order of checksLibravatar Jeff King1-1/+1
The looks_like_pathspec() check is much cheaper than check_filename(), which actually stats the file. Since either is sufficient for our return value, we should do the cheaper one first, potentially short-circuiting the other. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-29verify_filename(): treat ":(magic)" as a pathspecLibravatar Jeff King1-1/+19
For commands that take revisions and pathspecs, magic pathspecs like ":(exclude)foo" require the user to specify a disambiguating "--", since they do not match a file in the filesystem, like: git grep foo -- :(exclude)bar This makes them more annoying to use than they need to be. We loosened the rules for wildcards in 28fcc0b71 (pathspec: avoid the need of "--" when wildcard is used, 2015-05-02). Let's do the same for pathspecs with long-form magic. We already handle the short-forms ":/" and ":^" specially in check_filename(), so we don't need to handle them here. And in fact, we could do the same with long-form magic, parsing out the actual filename and making sure it exists. But there are a few reasons not to do it that way: - the parsing gets much more complicated, and we'd want to hand it off to the pathspec code. But that code isn't ready to do this kind of speculative parsing (it's happy to die() when it sees a syntactically invalid pathspec). - not all pathspec magic maps to a filesystem path. E.g., :(attr) should be treated as a pathspec regardless of what is in the filesystem - we can be a bit looser with ":(" than with the short-form ":/", because it is much less likely to have a false positive. Whereas ":/" also means "search for a commit with this regex". Note that because the change is in verify_filename() and not in its helper check_filename(), this doesn't affect the verify_non_filename() case. I.e., if an item that matches our new rule doesn't resolve as an object, we may fallback to treating it as a pathspec (rather than complaining it doesn't exist). But if it does resolve (e.g., as a file in the index that starts with an open-paren), we won't then complain that it's also a valid pathspec. This matches the wildcard-exception behavior. And of course in either case, one can always insert the "--" to get more precise results. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-29check_filename(): handle ":^" path magicLibravatar Jeff King1-0/+4
We special-case "git log :/foo" to work when "foo" exists in the working tree. But :^ (and its alias :!) do not get the same treatment, requiring the user to supply a disambiguating "--". Let's make them work without requiring the user to type the "--". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-29check_filename(): use skip_prefixLibravatar Jeff King1-3/+2
This avoids some magic numbers (and we'll be adding more similar calls in a minute). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-29check_filename(): refactor ":/" handlingLibravatar Jeff King1-7/+8
We handle arguments with the ":/" pathspec magic specially, making sure the name exists at the top-level. We'll want to handle more pathspec magic in future patches, so let's do a little rearranging to make that easier. Instead of relying on an if/else cascade to avoid the prefix_filename() call, we'll just set prefix to NULL. Likewise, we'll get rid of the "name" variable entirely, and just push the "arg" pointer forward to skip past the magic. That means by the time we get to the prefix-handling, we're set up appropriately whether we saw ":/" or not. Note that this does impact the final error message we produce when stat() fails, as it shows "arg" (which we'll have modified to skip magic and include the prefix). This is a good thing; the original message would say something like "failed to stat ':/foo'", which is confusing (we tried to stat "foo"). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08setup_discovered_git_dir(): plug memory leakLibravatar Johannes Schindelin1-2/+7
The setup_explicit_git_dir() function does not take custody of the string passed as first parameter; we have to release it if we turned the value of git_dir into an absolute path. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08setup_bare_git_dir(): help static analysisLibravatar Johannes Schindelin1-1/+1
Coverity reported a memory leak in this function. However, it can only be called once, as setup_git_directory() changes global state and hence is not reentrant. Mark the variable as static to indicate that this is a singleton. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-30Merge branch 'bw/recurse-submodules-relative-fix'Libravatar Junio C Hamano1-1/+5
A few commands that recently learned the "--recurse-submodule" option misbehaved when started from a subdirectory of the superproject. * bw/recurse-submodules-relative-fix: ls-files: fix bug when recursing with relative pathspec ls-files: fix typo in variable name grep: fix bug when recursing with relative pathspec setup: allow for prefix to be passed to git commands grep: fix help text typo
2017-03-28Merge branch 'rs/strbuf-add-real-path' into maintLibravatar Junio C Hamano1-1/+1
An helper function to make it easier to append the result from real_path() to a strbuf has been added. * rs/strbuf-add-real-path: strbuf: add strbuf_add_real_path() cocci: use ALLOC_ARRAY
2017-03-21prefix_filename: return newly allocated stringLibravatar Jeff King1-3/+8
The prefix_filename() function returns a pointer to static storage, which makes it easy to use dangerously. We already fixed one buggy caller in hash-object recently, and the calls in apply.c are suspicious (I didn't dig in enough to confirm that there is a bug, but we call the function once in apply_all_patches() and then again indirectly from parse_chunk()). Let's make it harder to get wrong by allocating the return value. For simplicity, we'll do this even when the prefix is empty (and we could just return the original file pointer). That will cause us to allocate sometimes when we wouldn't otherwise need to, but this function isn't called in performance critical code-paths (and it already _might_ allocate on any given call, so a caller that cares about performance is questionable anyway). The downside is that the callers need to remember to free() the result to avoid leaking. Most of them already used xstrdup() on the result, so we know they are OK. The remainder have been converted to use free() as appropriate. I considered retaining a prefix_filename_unsafe() for cases where we know the static lifetime is OK (and handling the cleanup is awkward). This is only a handful of cases, though, and it's not worth the mental energy in worrying about whether the "unsafe" variant is OK to use in any situation. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-21prefix_filename: drop length parameterLibravatar Jeff King1-1/+1
This function takes the prefix as a ptr/len pair, but in every caller the length is exactly strlen(ptr). Let's simplify the interface and just take the string. This saves callers specifying it (and in some cases handling a NULL prefix). In a handful of cases we had the length already without calling strlen, so this is technically slower. But it's not likely to matter (after all, if the prefix is non-empty we'll allocate and copy it into a buffer anyway). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-17Merge branch 'js/early-config'Libravatar Junio C Hamano1-76/+177
The start-up sequence of "git" needs to figure out some configured settings before it finds and set itself up in the location of the repository and was quite messy due to its "chicken-and-egg" nature. The code has been restructured. * js/early-config: setup.c: mention unresolved problems t1309: document cases where we would want early config not to die() setup_git_directory_gently_1(): avoid die()ing t1309: test read_early_config() read_early_config(): really discover .git/ read_early_config(): avoid .git/config hack when unneeded setup: make read_early_config() reusable setup: introduce the discover_git_directory() function setup_git_directory_1(): avoid changing global state setup: prepare setup_discovered_git_dir() for the root directory setup_git_directory(): use is_dir_sep() helper t7006: replace dubious test
2017-03-17setup: allow for prefix to be passed to git commandsLibravatar Brandon Williams1-1/+6
In a future patch child processes which act on submodules need a little more context about the original command that was invoked. This patch teaches git to use the prefix stored in `GIT_INTERNAL_TOPLEVEL_PREFIX` instead of the prefix that was potentally found during the git directory setup process. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-14setup.c: mention unresolved problemsLibravatar Johannes Schindelin1-0/+2
During the review of the `early-config` patch series, two issues have been identified that have been with us forever. Mark the identified problems for later so that we do not forget them. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-14setup_git_directory_gently_1(): avoid die()ingLibravatar Johannes Schindelin1-8/+17
This function now has a new caller in addition to setup_git_directory(): the newly introduced discover_git_directory(). That function wants to discover the current .git/ directory, and in case of a corrupted one simply pretend that there is none to be found. Example: if a stale .git file exists in the parent directory, and the user calls `git -p init`, we want Git to simply *not* read any repository config for the pager (instead of aborting with a message that the .git file is corrupt). Let's actually pretend that there was no GIT_DIR to be found in that case when being called from discover_git_directory(), but keep the previous behavior (i.e. to die()) for the setup_git_directory() case. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-14setup: introduce the discover_git_directory() functionLibravatar Johannes Schindelin1-0/+43
We modified the setup_git_directory_gently_1() function earlier to make it possible to discover the GIT_DIR without changing global state. However, it is still a bit cumbersome to use if you only need to figure out the (possibly absolute) path of the .git/ directory. Let's just provide a convenient wrapper function with an easier signature that *just* discovers the .git/ directory. We will use it in a subsequent patch to fix the early config. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-14setup_git_directory_1(): avoid changing global stateLibravatar Johannes Schindelin1-75/+118
For historical reasons, Git searches for the .git/ directory (or the .git file) by changing the working directory successively to the parent directory of the current directory, until either anything was found or until a ceiling or a mount point is hit. Further global state may be changed in case a .git/ directory was found. We do have a use case, though, where we would like to find the .git/ directory without having any global state touched, though: when we read the early config e.g. for the pager or for alias expansion. Let's just move all of code that changes any global state out of the function `setup_git_directory_gently_1()` into `setup_git_directory_gently()`. In subsequent patches, we will use the _1() function in a new `discover_git_directory()` function that we will then use for the early config code. Note: the new loop is a *little* tricky, as we have to handle the root directory specially: we cannot simply strip away the last component including the slash, as the root directory only has that slash. To remedy that, we introduce the `min_offset` variable that holds the minimal length of an absolute path, and using that to special-case the root directory, including an early exit before trying to find the parent of the root directory. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-14setup: prepare setup_discovered_git_dir() for the root directoryLibravatar Johannes Schindelin1-2/+4
Currently, the offset parameter (indicating what part of the cwd parameter corresponds to the current directory after discovering the .git/ directory) is set to 0 when we are running in the root directory. However, in the next patches we will avoid changing the current working directory while searching for the .git/ directory, meaning that the offset corresponding to the root directory will have to be 1 to reflect that this directory is characterized by the path "/" (and not ""). So let's make sure that setup_discovered_git_directory() only tries to append the trailing slash to non-root directories. Note: the setup_bare_git_directory() does not need a corresponding change, as it does not want to return a prefix. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-12Merge branch 'js/realpath-pathdup-fix'Libravatar Junio C Hamano1-2/+2
Git v2.12 was shipped with an embarrassing breakage where various operations that verify paths given from the user stopped dying when seeing an issue, and instead later triggering segfault. * js/realpath-pathdup-fix: real_pathdup(): fix callsites that wanted it to die on error t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE