| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
longest_ancestor_length() relies on a textual comparison of directory
parts to find the part of path that overlaps with one of the paths in
prefix_list. But this doesn't work if any of the prefixes involves a
symbolic link, because the directories will look different even though
they might logically refer to the same directory. So canonicalize the
paths listed in GIT_CEILING_DIRECTORIES using real_path_if_valid()
before passing them to longest_ancestor_length(). (Also rename
normalize_ceiling_entry() to canonicalize_ceiling_entry() to reflect
the change.)
path is already in canonical form, so doesn't need to be canonicalized
again.
This fixes some problems with using GIT_CEILING_DIRECTORIES that
contains paths involving symlinks, including t4035 if run with --root
set to a path involving symlinks.
Please note that test t0060 is *not* changed analogously, because that
would make the test suite results dependent on the contents of the
local root directory. However, real_path() is already tested
independently, and the "ancestor" tests cover the non-normalization
aspects of longest_ancestor_length(), so coverage remains sufficient.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Move the responsibility for normalizing prefixes from
longest_ancestor_length() to its callers. Use slightly different
normalizations at the two callers:
In setup_git_directory_gently_1(), use the old normalization, which
ignores paths that are not usable. In the next commit we will change
this caller to also resolve symlinks in the paths from
GIT_CEILING_DIRECTORIES as part of the normalization.
In "test-path-utils longest_ancestor_length", use the old
normalization, but die() if any paths are unusable. Also change t0060
to only pass normalized paths to the test program (no empty entries or
non-absolute paths, strip trailing slashes from the paths, and remove
tests that thereby become redundant).
The point of this change is to reduce the scope of the ancestor_length
tests in t0060 from testing normalization+longest_prefix to testing
only mostly longest_prefix. This is necessary because when
setup_git_directory_gently_1() starts resolving symlinks as part of
its normalization, it will not be reasonable to do the same in the
test suite, because that would make the test results depend on the
contents of the root directory of the filesystem on which the test is
run. HOWEVER: under Windows, bash mangles arguments that look like
absolute POSIX paths into DOS paths. So we have to retain the level
of normalization done by normalize_path_copy() to convert the
bash-mangled DOS paths (which contain backslashes) into paths that use
forward slashes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Change longest_ancestor_length() to take the prefixes argument as a
string_list rather than as a colon-separated string. This will make
it easier for the caller to alter the entries before calling
longest_ancestor_length().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
|
|
When the user gives an argument that can be taken as both a revision
name and a pathname without disambiguating with "--", we used to
give a help message "Use '--' to separate". The message has been
clarified to show where that '--' goes on the command line.
* mm/die-with-dashdash-help:
setup: clarify error messages for file/revisions ambiguity
|
|
The previous "Use '--' to separate filenames from revisions" may sound
obvious for an old-time Unix user, but does not make it clear how to use
this '--'. In addition to mentionning this '--', give an idea of what the
new command should look like.
Ideally, we could provide cut-and-paste ready commands based on the
command that just failed, but we have no easy access to argv[] in this
place of the code.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
|
|
"git diff --no-index" did not correctly handle relative paths and
did not correctly give exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
|
|
"git diff COPYING HEAD:COPYING" gave a nonsense error message that
claimed that the treeish HEAD did not have COPYING in it.
* mm/verify-filename-fix:
verify_filename(): ask the caller to chose the kind of diagnosis
sha1_name: do not trigger detailed diagnosis for file arguments
|
|
"git diff --no-index" did not correctly handle relative paths and
did not give correct exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
|
|
The only external caller is setup.c that tries to give a nicer error
message when an object name is misspelt (e.g. "HEAD:cashe.h").
Retire it and give the caller a dedicated and more intuitive API
function maybe_die_on_misspelt_object_name().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff COPYING HEAD:COPYING" gave a nonsense error message that
claimed that the treeish HEAD did not have COPYING in it.
|
|
When diff-no-index is given a relative path to a file outside the
repository, it aborts with error. However, if the file is given
using an absolute path, the diff runs as expected. The two cases
should be treated the same.
Tests and commit message by Tim Henigan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
verify_filename() can be called in two different contexts. Either we
just tried to interpret a string as an object name, and it fails, so
we try looking for a working tree file (i.e. we finished looking at
revs that come earlier on the command line, and the next argument
must be a pathname), or we _know_ that we are looking for a
pathname, and shouldn't even try interpreting the string as an
object name.
For example, with this change, we get:
$ git log COPYING HEAD:inexistant
fatal: HEAD:inexistant: no such path in the working tree.
Use '-- <path>...' to specify paths that do not exist locally.
$ git log HEAD:inexistant
fatal: Path 'inexistant' does not exist in 'HEAD'
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various failure modes in the repository detection code path currently
quote the wrong directory in their error message. The working directory
is changed iteratively to the parent directory until a git repository is
found. If the working directory cannot be changed to the parent
directory for some reason, the detection gives up and prints an error
message. The error message should report the current working directory.
Instead of continually updating the 'cwd' variable, which is actually
used to remember the original working directory, the 'offset' variable
is used to keep track of the current working directory. At the point
where the affected error handling code is called, 'offset' already
points to the end of the parent of the working directory, rather than
the current working directory.
Fix this by explicitly using a variable 'offset_parent' and update
'offset' concurrently with the call to chdir.
In a similar fashion, the function get_device_or_die() would print the
original working directory in case of a failure, rather than the current
working directory. Fix this as well by making use of the 'offset'
variable.
Lastly, replace the phrase 'mount parent' with 'mount point'. The former
appears to be a typo.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you specify a local repository on the command line of
clone, ls-remote, upload-pack, receive-pack, or upload-archive,
or in a request to git-daemon, we perform a little bit of
lookup magic, doing things like looking in working trees for
.git directories and appending ".git" for bare repos.
For clone, this magic happens in get_repo_path. For
everything else, it happens in enter_repo. In both cases,
there are some ambiguous or confusing cases that aren't
handled well, and there is one case that is not handled the
same by both methods.
This patch tries to provide (and test!) standard, sensible
lookup rules for both code paths. The intended changes are:
1. When looking up "foo", we have always preferred
a working tree "foo" (containing "foo/.git" over the
bare "foo.git". But we did not prefer a bare "foo" over
"foo.git". With this patch, we do so.
2. We would select directories that existed but didn't
actually look like git repositories. With this patch,
we make sure a selected directory looks like a git
repo. Not only is this more sensible in general, but it
will help anybody who is negatively affected by change
(1) negatively (e.g., if they had "foo.git" next to its
separate work tree "foo", and expect to keep finding
"foo.git" when they reference "foo").
3. The enter_repo code path would, given "foo", look for
"foo.git/.git" (i.e., do the ".git" append magic even
for a repo with working tree). The clone code path did
not; with this patch, they now behave the same.
In the unlikely case of a working tree overlaying a bare
repo (i.e., a ".git" directory _inside_ a bare repo), we
continue to treat it as a working tree (prefering the
"inner" .git over the bare repo). This is mainly because the
combination seems nonsensical, and I'd rather stick with
existing behavior on the off chance that somebody is relying
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/common-prefix-unification:
rename pathspec_prefix() to common_prefix() and move to dir.[ch]
consolidate pathspec_prefix and common_prefix
remove prefix argument from pathspec_prefix
|
|
* fg/submodule-git-file-git-dir:
Move git-dir for submodules
rev-parse: add option --resolve-git-dir <path>
Conflicts:
cache.h
git-submodule.sh
|
|
Also make common_prefix_len() static as this refactoring makes dir.c
itself the only caller of this helper function.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The implementation from pathspec_prefix (slightly modified) replaces the
current common_prefix, because it also respects glob characters.
Based on a patch by Clemens Buchacher.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Passing a prefix to a function that is supposed to find the prefix is
strange. And it's really only used if the pathspec is NULL. Make the
callers handle this case instead.
As we are always returning a fresh copy of a string (or NULL), change the
type of the returned value to non-const "char *".
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/maint-clone-gitdir:
clone: allow to clone from .git file
read_gitfile_gently(): rename misnamed function to read_gitfile()
|
|
* di/parse-options-split:
Reduce parse-options.o dependencies
parse-options: export opterr, optbug
|
|
The function was not gentle at all to the callers and died without giving
them a chance to deal with possible errors. Rename it to read_gitfile(),
and update all the callers.
As no existing caller needs a true "gently" variant, we do not bother
adding one at this point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check if <path> is a valid git-dir or a valid git-file that points
to a valid git-dir.
We want tests to be independent from the fact that a git-dir may
be a git-file. Thus we changed tests to use this feature.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently parse-options.o pulls quite a big bunch of dependencies.
his complicates it's usage in contrib/ because it pulls external
dependencies and it also increases executables size.
Split off less generic and more internal to git part of
parse-options.c to parse-options-cb.c.
Move prefix_filename function from setup.c to abspath.c. abspath.o
and wrapper.o pull each other, so it's unlikely to increase the
dependencies. It was a dependency of parse-options.o that pulled
many others.
Now parse-options.o pulls just abspath.o, ctype.o, strbuf.o, usage.o,
wrapper.o, libc directly and strlcpy.o indirectly.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/partial-commit-relative-pathspec:
commit: allow partial commits with relative paths
|
|
In order to do partial commits, git-commit overlays a tree on the
cache and checks pathspecs against the result. Currently, the
overlaying is done using "prefix" which prevents relative pathspecs
with ".." and absolute pathspec from matching when they refer to
files not under "prefix" and absent from the index, but still in
the tree (i.e. files staged for removal).
The point of providing a prefix at all is performance optimization.
If we say there is no common prefix for the files of interest, then
we have to read the entire tree into the index.
But even if we cannot use the working directory as a prefix, we can
still figure out if there is a common prefix for all given paths,
and use that instead. The pathspec_prefix() routine from ls-files.c
does exactly that.
Any use of global variables is removed from pathspec_prefix() so
that it can be called from commit.c.
Reported-by: Reuben Thomas <rrt@sc3d.org>
Analyzed-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* da/git-prefix-everywhere:
t/t7503-pre-commit-hook.sh: Add GIT_PREFIX tests
git-mergetool--lib: Make vimdiff retain the current directory
git: Remove handling for GIT_PREFIX
setup: Provide GIT_PREFIX to built-ins
|
|
* maint:
git-submodule.sh: separate parens by a space to avoid confusing some shells
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
|
|
* jm/maint-misc-fix:
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
|
|
GIT_PREFIX was added in 7cf16a14f5c070f7b14cf28023769450133172ae so that
aliases can know the directory from which a !alias was called.
Knowing the prefix relative to the root is helpful in other programs
so export it to built-ins as well.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise, a negative error return becomes a very large read
value. We catch this in practice because we compare the
expected and actual numbers of bytes (and you are not likely
to be reading (size_t)-1 bytes), but this makes the
correctness a little more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/magic-pathspec:
setup.c: Fix some "symbol not declared" sparse warnings
t3703: Skip tests using directory name ":" on Windows
revision.c: leave a note for "a lone :" enhancement
t3703, t4208: add test cases for magic pathspec
rev/path disambiguation: further restrict "misspelled index entry" diag
fix overslow :/no-such-string-ever-existed diagnostics
fix overstrict :<path> diagnosis
grep: use get_pathspec() correctly
pathspec: drop "lone : means no pathspec" from get_pathspec()
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
magic pathspec: add ":(icase)path" to match case insensitively
magic pathspec: futureproof shorthand form
magic pathspec: add tentative ":/path/from/top/level" pathspec support
|
|
In particular, sparse issues the "symbol 'a_symbol' was not declared.
Should it be static?" warnings for the following symbols:
setup.c:159:3: 'pathspec_magic'
setup.c:176:12: 'prefix_pathspec'
These symbols only require file scope, so we add the static modifier
to their declarations.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A colon followed by anything !isalnum() (e.g. ":/heh") at this point is
known not to be an existing rev. Just give a generic "neither a rev nor
a path" error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cmd :/no-such-string-ever-existed" runs an extra round of get_sha1()
since 009fee4 (Detailed diagnosis when parsing an object name fails.,
2009-12-07). Once without error diagnosis to see there is no commit with
such a string in the log message (hence "it cannot be a ref"), and after
seeing that :/no-such-string-ever-existed is not a filename (hence "it
cannot be a path, either"), another time to give "better diagnosis".
The thing is, the second time it runs, we already know that traversing the
history all the way down to the root will _not_ find any matching commit.
Rename misguided "gently" parameter, which is turned off _only_ when the
"detailed diagnosis" codepath knows that it cannot be a ref and making the
call only for the caller to die with a message. Flip its meaning (and
adjust the callers) and call it "only_to_die", which is not a great name,
but it describes far more clearly what the codepaths that switches their
behaviour based on this variable do.
On my box, the command spends ~1.8 seconds without the patch to make the
report; with the patch it spends ~1.12 seconds.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We may want to give the pathspec subsystem such a feature, but not while
we are still using get_pathspec() that returns a stupid "char **" that
loses subtle nuances that existed in the input string.
In the meantime, the callers of get_pathspec() that want to support it
could do an equivalent before feeding their argv[] to the function
themselves quite easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit d0546e2d488b1ba185c430b638619ab1d91af509, which
was only meant to be a Proof-of-concept used during the discussion.
The real implementation of the feature needs to wait until we migrate
all the code to use "struct pathspec", not "char **", to represent
richer semantics given to pathspec.
|
|
* nd/maint-setup:
Kill off get_relative_cwd()
setup: return correct prefix if worktree is '/'
Conflicts:
dir.c
setup.c
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier design was to take whatever non-alnum that the short format
parser happens to support, leaving the rest as part of the pattern, so a
version of git that knows '*' magic and a version that does not would have
behaved differently when given ":*Makefile". The former would have
applied the '*' magic to the pattern "Makefile", while the latter would
used no magic to the pattern "*Makefile".
Instead, just reserve all non-alnum ASCII letters that are neither glob
nor regexp special as potential magic signature, and when we see a magic
that is not supported, die with an error message, just like the longhand
codepath does.
With this, ":%#!*Makefile" will always mean "%#!" magic applied to the
pattern "*Makefile", no matter what version of git is used (it is a
different matter if the version of git supports all of these three magic
matching rules).
Also make ':' without anything else to mean "there is no pathspec". This
would allow differences between "git log" and "git log ." run from the top
level of the working tree (the latter simplifies no-op commits away from
the history) to be expressed from a subdirectory by saying "git log :".
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support ":/" magic string that can be prefixed to a pathspec element to
say "this names the path from the top-level of the working tree", when
you are in the subdirectory.
For example, you should be able to say:
$ edit Makefile ;# top-level
$ cd Documentation
$ edit git.txt ;# in the subdirectory
and then do one of three things, still inside the subdirectory:
$ git add -u . ;# add only Documentation/git.txt
$ git add -u :/ ;# add everything, including paths outside Documentation
$ git add -u ;# whatever the default setting is.
To truly support magic pathspec, the API needs to be restructured so that
get_pathspec() and init_pathspec() are unified into one call. Currently,
the former just prefixes the user supplied pathspec with the current
subdirectory path, and the latter takes the output from the former and
pre-parses them into a bit richer structure for easier handling. They
should become a single API function that takes the current subdirectory
path and the remainder of argv[] (after parsing --options and revision
arguments from the command line) and returns an array of parsed pathspec
elements, and "magic" should become attributes of struct pathspec_item.
This patch implements only "top" magic because it can be hacked into the
system without such a refactoring.
The syntax for magic pathspec prefix is designed to be extensible yet
simple to type to invoke a simple magic like "from the top". The parser
for the magic prefix is hooked into get_pathspec() function in this patch,
and it needs to be moved when we refactor the API.
But we have to start from somewhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The same old problem reappears after setup code is reworked. We tend
to assume there is at least one path component in a path and forget
that path can be simply '/'.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/setup:
setup: translate symlinks in filename when using absolute paths
|
|
The original intention of --work-tree was to allow people to work in a
subdirectory of their working tree that does not have an embedded .git
directory. Because their working tree, which their $cwd was in, did not
have an embedded .git, they needed to use $GIT_DIR to specify where it is,
and because this meant there was no way to discover where the root level
of the working tree was, so we needed to add $GIT_WORK_TREE to tell git
where it was.
However, this facility has long been (mis)used by people's scripts to
start git from a working tree _with_ an embedded .git directory, let git
find .git directory, and then pretend as if an unrelated directory were
the associated working tree of the .git directory found by the discovery
process. It happens to work in simple cases, and is not worth causing
"regression" to these scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
otherwise, comparison to validate against work tree will fail when
the path includes a symlink and the name passed is not canonical.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
|
|
When setup_work_tree() is called, it moves cwd to $GIT_WORK_TREE and
makes internal copy of $GIT_WORK_TREE absolute. The environt variable,
if set by user, remains unchanged. If the variable is relative, it is
no longer correct because its base dir has changed.
Instead of making $GIT_WORK_TREE absolute too, we just say "." and let
subsequent git processes handle it.
Reported-by: Michel Briand <michelbriand@free.fr>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is the most complex one among the three setup_*
functions because all GIT_DIR, GIT_WORK_TREE, core.worktree and
core.bare are involved.
Because core.worktree is only effective inside
setup_explicit_git_dir() and the extra code in setup_git_directory()
is to handle that. The extra code can now be retired.
Also note that setup_explicit assignment is removed, worktree setting
is no longer decided by get_git_work_tree(). get_git_work_tree() will
be simplified in the next commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Michael Haggerty
Junio C Hamano
Matthieu Moy
Jeff King
Clemens Buchacher
Fredrik Gustafsson
Dmitry Ivankov
David Aguilar
Ramsay Jones
Nguyễn Thái Ngọc Duy
Carlos Martín Nieto
Jonathan Nieder
Carlo Marcelo Arenas Belon