summaryrefslogtreecommitdiff
path: root/setup.c
AgeCommit message (Collapse)AuthorFilesLines
2011-05-02Merge branch 'nd/maint-setup'Libravatar Junio C Hamano1-3/+4
* nd/maint-setup: Kill off get_relative_cwd() setup: return correct prefix if worktree is '/' Conflicts: dir.c setup.c
2011-03-28setup: return correct prefix if worktree is '/'Libravatar Nguyễn Thái Ngọc Duy1-3/+4
The same old problem reappears after setup code is reworked. We tend to assume there is at least one path component in a path and forget that path can be simply '/'. Reported-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-17Name make_*_path functions more accuratelyLibravatar Carlos Martín Nieto1-7/+7
Rename the make_*_path functions so it's clearer what they do, in particlar make clear what the differnce between make_absolute_path and make_nonrelative_path is by renaming them real_path and absolute_path respectively. make_relative_path has an understandable name and is renamed to relative_path to maintain the name convention. The function calls have been replaced 1-to-1 in their usage. Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-09Merge branch 'cb/setup'Libravatar Junio C Hamano1-4/+7
* cb/setup: setup: translate symlinks in filename when using absolute paths
2011-01-21Subject: setup: officially support --work-tree without --git-dirLibravatar Jonathan Nieder1-0/+19
The original intention of --work-tree was to allow people to work in a subdirectory of their working tree that does not have an embedded .git directory. Because their working tree, which their $cwd was in, did not have an embedded .git, they needed to use $GIT_DIR to specify where it is, and because this meant there was no way to discover where the root level of the working tree was, so we needed to add $GIT_WORK_TREE to tell git where it was. However, this facility has long been (mis)used by people's scripts to start git from a working tree _with_ an embedded .git directory, let git find .git directory, and then pretend as if an unrelated directory were the associated working tree of the .git directory found by the discovery process. It happens to work in simple cases, and is not worth causing "regression" to these scripts. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-04setup: translate symlinks in filename when using absolute pathsLibravatar Carlo Marcelo Arenas Belon1-4/+7
otherwise, comparison to validate against work tree will fail when the path includes a symlink and the name passed is not canonical. Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-28Merge branch 'nd/setup'Libravatar Junio C Hamano1-92/+146
* nd/setup: (47 commits) setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd git.txt: correct where --work-tree path is relative to Revert "Documentation: always respect core.worktree if set" t0001: test git init when run via an alias Remove all logic from get_git_work_tree() setup: rework setup_explicit_git_dir() setup: clean up setup_discovered_git_dir() t1020-subdirectory: test alias expansion in a subdirectory setup: clean up setup_bare_git_dir() setup: limit get_git_work_tree()'s to explicit setup case only Use git_config_early() instead of git_config() during repo setup Add git_config_early() git-rev-parse.txt: clarify --git-dir t1510: setup case #31 t1510: setup case #30 t1510: setup case #29 t1510: setup case #28 t1510: setup case #27 t1510: setup case #26 t1510: setup case #25 ...
2010-12-27setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwdLibravatar Nguyễn Thái Ngọc Duy1-0/+8
When setup_work_tree() is called, it moves cwd to $GIT_WORK_TREE and makes internal copy of $GIT_WORK_TREE absolute. The environt variable, if set by user, remains unchanged. If the variable is relative, it is no longer correct because its base dir has changed. Instead of making $GIT_WORK_TREE absolute too, we just say "." and let subsequent git processes handle it. Reported-by: Michel Briand <michelbriand@free.fr> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: rework setup_explicit_git_dir()Libravatar Nguyễn Thái Ngọc Duy1-60/+78
This function is the most complex one among the three setup_* functions because all GIT_DIR, GIT_WORK_TREE, core.worktree and core.bare are involved. Because core.worktree is only effective inside setup_explicit_git_dir() and the extra code in setup_git_directory() is to handle that. The extra code can now be retired. Also note that setup_explicit assignment is removed, worktree setting is no longer decided by get_git_work_tree(). get_git_work_tree() will be simplified in the next commit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: clean up setup_discovered_git_dir()Libravatar Nguyễn Thái Ngọc Duy1-36/+36
If core.bare is true, discard the discovered worktree, move back to original cwd. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: clean up setup_bare_git_dir()Libravatar Nguyễn Thái Ngọc Duy1-10/+9
work_tree_env argument is removed because this function does not need it. GIT_WORK_TREE is only effective inside setup_explicit_git_dir. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: limit get_git_work_tree()'s to explicit setup case onlyLibravatar Nguyễn Thái Ngọc Duy1-2/+8
get_git_work_tree() takes input as core.worktree, core.bare, GIT_WORK_TREE and decides correct worktree setting. Unfortunately it does not do its job well. core.worktree and GIT_WORK_TREE should only be taken into account, if GIT_DIR is set (which is handled by setup_explicit_git_dir). For other setup cases, only core.bare matters. Add a temporary variable setup_explicit to adjust get_git_work_tree() behavior as such. This variable will be gone once setup_* rework is done. Also remove is_bare_repository_cfg check in set_git_work_tree() to ease the rework. We are going to check for core.bare and core.worktree early before setting worktree. For example, if core.bare is true, no need to set worktree. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22Use git_config_early() instead of git_config() during repo setupLibravatar Nguyễn Thái Ngọc Duy1-12/+35
When git_config() is called, either git_dir has already been set (by $GIT_DIR env or set_git_dir()), or it will default git_dir to ".git". git_config_early() gives setup functions more freedom because it does not require git_dir. Give it a config path, it will happily examine it. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-16Merge branch 'nd/extended-sha1-relpath'Libravatar Junio C Hamano1-1/+1
* nd/extended-sha1-relpath: get_sha1: teach ":$n:<path>" the same relative path logic get_sha1: support relative path ":path" syntax Make prefix_path() return char* without const Conflicts: sha1_name.c
2010-12-12Merge branch 'jn/parse-options-extra'Libravatar Junio C Hamano1-1/+3
* jn/parse-options-extra: update-index: migrate to parse-options API setup: save prefix (original cwd relative to toplevel) in startup_info parse-options: make resuming easier after PARSE_OPT_STOP_AT_NON_OPTION parse-options: allow git commands to invent new option types parse-options: never suppress arghelp if LITERAL_ARGHELP is set parse-options: do not infer PARSE_OPT_NOARG from option type parse-options: sanity check PARSE_OPT_NOARG flag parse-options: move NODASH sanity checks to parse_options_check parse-options: clearer reporting of API misuse parse-options: Don't call parse_options_check() so much
2010-12-07Make prefix_path() return char* without constLibravatar Nguyễn Thái Ngọc Duy1-1/+1
prefix_path() allocates new buffer. There's no reason for it to keep the buffer for itself and waste memory. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-07setup: save prefix (original cwd relative to toplevel) in startup_infoLibravatar Nguyễn Thái Ngọc Duy1-1/+3
Save the path from the original cwd to the cwd at the end of the setup procedure in the startup_info struct introduced in e37c1329 (2010-08-05). The value cannot vary from thread to thread anyway, since the cwd is global. So now in your builtin command, instead of passing prefix around, when you want to convert a user-supplied path to a cwd-relative path, you can use startup_info->prefix directly. Caveat: As with the return value from setup_git_directory_gently(), startup_info->prefix would be NULL when the original cwd is not a subdir of the toplevel. Longer term, this would allow the prefix to be reused when several noncooperating functions require access to the same repository (for example, when accessing configuration before running a builtin). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-18prefix_filename(): safely handle the case where pfx_len=0Libravatar Thomas Rast1-2/+2
Current prefix_filename() is proofed against the case where the prefix 'pfx' is NULL or a 0-length string, _except on Windows_. Change the behaviour to work the same on both platforms, and only check pfx_len so that callers passing a NULL prefix with a nonzero pfx_len segfault early on both. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31Merge branch 'jn/paginate-fix'Libravatar Junio C Hamano1-1/+11
* jn/paginate-fix: t7006 (pager): add missing TTY prerequisites merge-file: run setup_git_directory_gently() sooner var: run setup_git_directory_gently() sooner ls-remote: run setup_git_directory_gently() sooner index-pack: run setup_git_directory_gently() sooner config: run setup_git_directory_gently() sooner bundle: run setup_git_directory_gently() sooner apply: run setup_git_directory_gently() sooner grep: run setup_git_directory_gently() sooner shortlog: run setup_git_directory_gently() sooner git wrapper: allow setup_git_directory_gently() be called earlier setup: remember whether repository was found git wrapper: introduce startup_info struct Conflicts: builtin/index-pack.c
2010-08-15Merge branch 'jn/maint-setup-fix' (early part) into jn/paginate-fixLibravatar Junio C Hamano1-72/+99
* 'jn/maint-setup-fix' (early part): Revert "rehabilitate 'git index-pack' inside the object store" setup: do not forget working dir from subdir of gitdir t4111 (apply): refresh index before applying patches to it setup: split off get_device_or_die helper setup: split off a function to handle hitting ceiling in repo search setup: split off code to handle stumbling upon a repository setup: split off a function to checks working dir for .git file setup: split off $GIT_DIR-set case from setup_git_directory_gently tests: try git apply from subdir of toplevel t1501 (rev-parse): clarify
2010-08-11setup: remember whether repository was foundLibravatar Nguyễn Thái Ngọc Duy1-1/+11
As v1.7.2~16^2 (git --paginate: paginate external commands again, 2010-07-14) explains, builtins (like git config) that do not use RUN_SETUP are not finding GIT_DIR set correctly when it is time to launch the pager from run_builtin(). If they were to search for a repository sooner, then the outcome of such early repository accesses would be more predictable and reliable. The cmd_*() functions learn whether a repository was found through the *nongit_ok return value from setup_git_directory_gently(). If run_builtin() is to take care of the repository search itself, that datum needs to be retrievable from somewhere else. Use the startup_info struct for this. As a bonus, this information becomes available to functions such as git_config() which might want to avoid trying to access a repository when none is present. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-04setup: split off a function to handle ordinary .git directoriesLibravatar Nguyễn Thái Ngọc Duy1-18/+25
Finish the clean-up of setup_git_directory_gently() by splitting the last case of validation+setup (global variables, prefix, check_format, set_git_dir) into its own function. Now setup_git_git_directory_gently itself takes care of discovery only and the functions that pick up from there are nearby in the source file so they can be easily compared. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-04setup: do not forget working dir from subdir of gitdirLibravatar Nguyễn Thái Ngọc Duy1-0/+2
v1.6.1.3~4^2 (Fix gitdir detection when in subdir of gitdir, 2009-01-16) did not go far enough: when a git directory is an ancestor of the original working directory, not only should GIT_DIR be set to point to the .git directory, but the original working directory should be restored before carrying out the relevant command. This way, the effect of running a git command from a subdir of .git will be the same whether or not GIT_DIR is explicitly set. Noticed while investigating v1.6.0.3~1 (rehabilitate 'git index-pack' inside the object store, 2008-10-20). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25setup: split off get_device_or_die helperLibravatar Jonathan Nieder1-11/+14
This does not eliminate any code, but it skims some off of the main loop of setup_git_directory_gently so that can be understood more easily. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25setup: split off a function to handle hitting ceiling in repo searchLibravatar Jonathan Nieder1-9/+12
Perhaps some day, other similar conditions (hitting the mount point, hitting the root of the file system) will share this code. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25setup: split off code to handle stumbling upon a repositoryLibravatar Jonathan Nieder1-13/+21
If a repository is found as an ancestor of the original working directory, it is assumed by default to be bare. Handle this case with its own function. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25setup: split off a function to checks working dir for .git fileLibravatar Jonathan Nieder1-7/+13
The repository discovery procedure looks something like this: while (same filesystem) { check .git in working dir check . chdir(..) } Add a function for the first step to make the actual code look a bit closer to that pseudocode. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25setup: split off $GIT_DIR-set case from setup_git_directory_gentlyLibravatar Jonathan Nieder1-32/+37
If $GIT_DIR is set, setup_git_directory_gently does not have to do any repository discovery at all. Split off a function for the validation it still does do, in the hope that this will make setup_git_directory_gently proper less daunting to read. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-20Merge branch 'maint'Libravatar Junio C Hamano1-0/+2
* maint: t/README: clarify test_must_fail description Check size of path buffer before writing into it Conflicts: t/README
2010-07-20Check size of path buffer before writing into itLibravatar Greg Brockman1-0/+2
This prevents a buffer overrun that could otherwise be triggered by creating a file called '.git' with contents gitdir: (something really long) Signed-off-by: Greg Brockman <gdb@mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-14Use dev_t for device id (st_dev) from stat in setup_git_directory_gently()Libravatar Raja R Harinath1-1/+2
The original declaration was int, which seems to cause trouble on my machine. It causes spurious "filesystem boundary" errors when running the testsuite. The cause seems to be $ stat -c%d . 2147549952 which is too large for a 32-bit int type. Using the correct type, dev_t, solves the issue. (Because I'm paranoid and forgetful, I checked -- yes, Unix v7 had dev_t.) Other uses of st_dev seem to be reasonably safe. fill_stat_cache_info truncates it to an 'unsigned int', but that value seems to be used only to validate the cache, and only if USE_STDEV is defined. Signed-off-by: Raja R Harinath <harinath@hurrynot.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-06Merge branch 'maint'Libravatar Junio C Hamano1-0/+6
* maint: setup: document prefix
2010-06-05setup: document prefixLibravatar Clemens Buchacher1-0/+6
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-04Rename ONE_FILESYSTEM to DISCOVERY_ACROSS_FILESYSTEMLibravatar Junio C Hamano1-2/+2
If a missing ONE_FILESYSTEM defaults to true, the only users who set this variable set it to false to tell git not to limit the discovery to one filesystem; there are too many negations in one sentence to make a simple panda brain dizzy. Use the variable GIT_DISCOVERY_ACROSS_FILESYSTEM that changes the behaviour from the default "limit to one filesystem" to "cross the boundary as I ask you to"; makes the semantics much more straight forward. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-04GIT_ONE_FILESYSTEM: flip the default to stop at filesystem boundariesLibravatar Junio C Hamano1-2/+2
Regarding the new environment variable, Linus Torvalds <torvalds@linux-foundation.org> writes on Tue, 30 Mar 2010 in <alpine.LFD.2.00.1003301537150.3707@i5.linux-foundation.org>: I suspect that it is _very_ unusual to have a source repo that crosses multiple filesystems, and the original reason for this patch-series seems to me to be likely to be more common than that multi-fs case. So having the logic go the other way would seem to match the common case, no? The "crossing filesystem boundary" condition is checked by comparing st_dev field in the result from stat(2). This is slightly worrysome if non-POSIX ports return different values in the field even for directories in the same work tree extracted to the same "filesystem". Erik Faye-Lund confirms that in the msysgit port st_dev is 0, so this should be safe, as "even Windows is safe" ;-) This will affect those who use /.git to cram /etc and /home/me in the same repostiory, /home is mounted from non-root filesystem, and a git operation is done from inside /home/me/src. But that is such a corner case we don't want to give preference over helping people who will benefit from having this default so that they do not have to suffer from slow automounters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-28Add support for GIT_ONE_FILESYSTEMLibravatar Lars R. Damerow1-0/+25
This patch makes git pay attention to the GIT_ONE_FILESYSTEM environment variable. When that variable is set, git will stop searching for a GIT_DIR when it attempts to cross a filesystem boundary. When working in an environment with too many automount points to make maintaining a GIT_CEILING_DIRECTORIES list enjoyable, GIT_ONE_FILESYSTEM gives the option of turning all such attempts off with one setting. Signed-off-by: Lars R. Damerow <lars@pixar.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-28truncate cwd string before printing error messageLibravatar Lars R. Damerow1-1/+3
Without this truncation the error message printed only shows the cwd from the start of the search, not where it failed. Signed-off-by: Lars R. Damerow <lars@pixar.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-07Merge branch 'nd/root-git'Libravatar Junio C Hamano1-5/+8
* nd/root-git: Add test for using Git at root of file system Support working directory located at root Move offset_1st_component() to path.c init-db, rev-parse --git-dir: do not append redundant slash make_absolute_path(): Do not append redundant slash Conflicts: setup.c sha1_file.c
2010-02-16Merge branch 'jc/typo'Libravatar Junio C Hamano1-1/+1
* jc/typo: Typofixes outside documentation area
2010-02-16Support working directory located at rootLibravatar Nguyễn Thái Ngọc Duy1-7/+10
Git should work regardless where the working directory is located, even at root. This patch fixes two places where it assumes working directory always have parent directory. In setup_git_directory_gently(), when Git goes up to root and finds .git there, it happily sets worktree to "" instead of "/". In prefix_path(), loosen the outside repo check a little bit. Usually when a path XXX is inside worktree /foo, it must be either "/foo", or "/foo/...". When worktree is simply "/", we can safely ignore the check: we have a slash at the beginning already. Not related to worktree, but also set gitdir correctly if a bare repo is placed (insanely?) at root. Thanks João Carlos Mendes Luís for pointing out this problem. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-06setenv(GIT_DIR) clean-upLibravatar René Scharfe1-2/+2
This patch converts the setenv() calls in path.c and setup.c. After the call, git grep with a pager works again in bare repos. It leaves the setenv(GIT_DIR_ENVIRONMENT, ...) calls in git.c alone, as they respond to command line switches that emulate the effect of setting the environment variable directly. The remaining site in environment.c is in set_git_dir() and is left alone, too, of course. Finally, builtin-init-db.c is left changed because the repo is still being carefully constructed when the environment variable is set. This fixes git shortlog when run inside a git directory, which had been broken by abe549e1. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-03Typofixes outside documentation areaLibravatar Junio C Hamano1-1/+1
begining -> beginning canonicalizations -> canonicalization comand -> command dewrapping -> unwrapping dirtyness -> dirtiness DISCLAMER -> DISCLAIMER explicitely -> explicitly feeded -> fed impiled -> implied madatory -> mandatory mimick -> mimic preceeding -> preceding reqeuest -> request substition -> substitution Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'bk/fix-relative-gitdir-file'Libravatar Junio C Hamano1-3/+19
* bk/fix-relative-gitdir-file: Handle relative paths in submodule .git files Test update-index for a gitlink to a .git file
2010-01-10Merge branch 'mm/diag-path-in-treeish'Libravatar Junio C Hamano1-2/+13
* mm/diag-path-in-treeish: Detailed diagnosis when parsing an object name fails.
2010-01-09Handle relative paths in submodule .git filesLibravatar Brad King1-3/+19
Commit 842abf0 (Teach resolve_gitlink_ref() about the .git file, 2008-02-20) taught resolve_gitlink_ref() to call read_gitfile_gently() to resolve .git files. In this commit teach read_gitfile_gently() to interpret a relative path in a .git file with respect to the file location. This change allows update-index to recognize a submodule that uses a relative path in its .git file. It previously failed because the relative path was wrongly interpreted with respect to the superproject directory. Signed-off-by: Brad King <brad.king@kitware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-16Merge branch 'maint' to sync with 1.6.5.7Libravatar Junio C Hamano1-2/+5
* maint: Git 1.6.5.7 worktree: don't segfault with an absolute pathspec without a work tree ignore unknown color configuration help.autocorrect: do not run a command if the command given is junk Illustrate "filter" attribute with an example
2009-12-16worktree: don't segfault with an absolute pathspec without a work treeLibravatar Junio C Hamano1-2/+5
If a command is run with an absolute path as a pathspec inside a bare repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen() on NULL, which is the result of get_git_work_tree(), and segfaulted. It should just fail instead. Currently the function returns NULL even inside .git/ in a repository with a work tree, but that is a separate issue. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-07Detailed diagnosis when parsing an object name fails.Libravatar Matthieu Moy1-2/+13
The previous error message was the same in many situations (unknown revision or path not in the working tree). We try to help the user as much as possible to understand the error, especially with the sha1:filename notation. In this case, we say whether the sha1 or the filename is problematic, and diagnose the confusion between relative-to-root and relative-to-$PWD confusion precisely. The 7 new error messages are tested. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-18check_filename(): make verify_filename() callable without dyingLibravatar Junio C Hamano1-18/+20
Make it possible to invole the logic of verify_filename() to make sure the pathname arguments are unambiguous without actually dying. The caller may want to do something different.
2009-09-18Test for WIN32 instead of __MINGW32_Libravatar Frank Li1-1/+1
The code which is conditional on MinGW32 is actually conditional on Windows. Use the WIN32 symbol, which is defined by the MINGW32 and MSVC environments, but not by Cygwin. Define SNPRINTF_SIZE_CORR=1 for MSVC too, as its vsnprintf function does not add NUL at the end of the buffer if the result fits the buffer size exactly. Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>