| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The sequencer already has an idea about using different merge
strategies. We just piggy-back on top of that, using rebase -i's
own settings, when running the sequencer in interactive rebase mode.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's `rebase` command inspects the `rebase.autostash` config setting
to determine whether it should stash any uncommitted changes before
rebasing and re-apply them afterwards.
As we introduce more bits and pieces to let the sequencer act as
interactive rebase's backend, here is the part that adds support for
the autostash feature.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When continuing after a `pick` command failed, we want that commit
to show up in the rewritten-list (and its notes to be rewritten), too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rebasing commits that have commit notes attached, the interactive
rebase rewrites those notes faithfully at the end. The sequencer must
do this, too, if it wishes to do interactive rebase's job.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already used the same reflog message as the scripted version of rebase
-i when finishing. With this commit, we do that also for all the commands
before that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes the code DRYer, with the obvious benefit that we can enhance
the code further in a single place.
We can also reuse the functionality elsewhere by calling this new
function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sequencer already knew how to fast-forward instead of
cherry-picking, if possible.
We want to continue to do this, of course, but in case of the 'reword'
command, we will need to call `git commit` after fast-forwarding.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is now trivial, as all the building blocks are in place: all we need
to do is to flip the "edit" switch when committing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing an interactive rebase, we want to leave a 'patch' file for
further inspection by the user (even if we never tried to actually apply
that patch, since we're cherry-picking instead).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An interactive rebase operates on a detached HEAD (to keep the reflog
of the original branch relatively clean), and updates the branch only
at the end.
Now that the sequencer learns to perform interactive rebases, it also
needs to learn the trick to update the branch before removing the
directory containing the state of the interactive rebase.
We introduce a new head_ref variable in a wider scope than necessary at
the moment, to allow for a later patch that prints out "Successfully
rebased and updated <ref>".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the last command of an interactive rebase fails, the user needs to
resolve the problem and then continue the interactive rebase. Naturally,
the todo script is empty by then. So let's not complain about that!
To that end, let's move that test out of the function that parses the
todo script, and into the more high-level function read_populate_todo().
This is also necessary by now because the lower-level parse_insn_buffer()
has no idea whether we are performing an interactive rebase or not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a cherry-pick continues without a "todo script", the intention is
simply to pick a single commit.
However, when an interactive rebase is continued without a "todo
script", it means that the last command has been completed and that we
now need to clean up.
This commit guards the revert/cherry-pick specific steps so that they
are not executed in rebase -i mode.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scripted version of the interactive rebase already does that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an interactive rebase is interrupted, the user may stage changes
before continuing, and we need to commit those changes in that case.
Please note that the nested "if" added to the sequencer_continue() is
not combined into a single "if" because it will be extended with an
"else" clause in a later patch in this patch series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the interactive rebase aborts, it writes out an author-script file
to record the author information for the current commit. As we are about
to teach the sequencer how to perform the actions behind an interactive
rebase, it needs to write those author-script files, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For users' convenience, most rebase commands can be abbreviated, e.g.
'p' instead of 'pick' and 'x' instead of 'exec'. Let's teach the
sequencer to handle those abbreviated commands just fine.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a huge patch, and at the same time a huge step forward to
execute the performance-critical parts of the interactive rebase in a
builtin command.
Since 'fixup' and 'squash' are not only similar, but also need to know
about each other (we want to reduce a series of fixups/squashes into a
single, final commit message edit, from the user's point of view), we
really have to implement them both at the same time.
Most of the actual work is done by the existing code path that already
handles the "pick" and the "edit" commands; We added support for other
features (e.g. to amend the commit message) in the patches leading up to
this one, yet there are still quite a few bits in this patch that simply
would not make sense as individual patches (such as: determining whether
there was anything to "fix up" in the "todo" script, etc).
In theory, it would be possible to reuse the fast-forward code path also
for the fixup and the squash code paths, but in practice this would make
the code less readable. The end result cannot be fast-forwarded anyway,
therefore let's just extend the cherry-picking code path for now.
Since the sequencer parses the entire `git-rebase-todo` script in one go,
fixup or squash commands without a preceding pick can be reported early
(in git-rebase--interactive, we could only report such errors just before
executing the fixup/squash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the interactive rebase, commands that were successfully processed are
not simply discarded, but appended to the 'done' file instead. This is
used e.g. to display the current state to the user in the output of
`git status` or the progress.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When calling `git rebase -i -v`, the user wants to see some statistics
after the commits were rebased. Let's show some.
The strbuf we use to perform that task will be used for other things
in subsequent commits, hence it is declared and initialized in a wider
scope than strictly needed here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'exec' command is a little special among rebase -i's commands, as it
does *not* have a SHA-1 as first parameter. Instead, everything after the
`exec` command is treated as command-line to execute.
Let's reuse the arg/arg_len fields of the todo_item structure (which hold
the oneline for pick/edit commands) to point to the command-line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch is a straight-forward reimplementation of the `edit`
operation of the interactive rebase command.
Well, not *quite* straight-forward: when stopping, the `edit`
command wants to write the `patch` file (which is not only the
patch, but includes the commit message and author information). To
that end, this patch requires the earlier work that taught the
log-tree machinery to respect the `file` setting of
rev_info->diffopt to write to a file stream different than stdout.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'noop' command is probably the most boring of all rebase -i commands
to support in the sequencer.
Which makes it an excellent candidate for this first stab to add support
for rebase -i's commands to the sequencer.
For the moment, let's also treat empty lines and commented-out lines as
'noop'; We will refine that handling later in this patch series.
To make it easier to identify "classes" of todo_commands (such as:
determine whether a command is pick-like, i.e. handles a single commit),
let's enforce a certain order of said commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch introduces a new action for the sequencer. It really does not
do a whole lot of its own right now, but lays the ground work for
patches to come. The intention, of course, is to finally make the
sequencer the work horse of the interactive rebase (the original idea
behind the "sequencer" concept).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is actually not safe to look for a commit message by looking for the
first empty line and skipping it.
The find_commit_subject() function looks more carefully, so let's use
it. Since we are interested in the entire commit message, we re-compute
the string length after verifying that the commit subject is not empty
(in which case the entire commit message would be empty, something that
should not happen but that we want to handle gracefully).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is the current coding style of the Git project to write
if (...) {
...
} else {
...
}
instead of putting the closing brace and the "else" keyword on separate
lines.
Pointed out by Junio Hamano.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was noticed while addressing Junio Hamano's concern that some
"else" operators were on separate lines than the preceding closing
brace.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back
to where cherry-pick started while picking multiple changes, when
the cherry-pick stopped to ask for help from the user, and the user
did "git reset --hard" to a different commit in order to re-attempt
the operation.
* sb/sequencer-abort-safety:
Revert "sequencer: remove useless get_dir() function"
sequencer: remove useless get_dir() function
sequencer: make sequencer abort safer
t3510: test that cherry-pick --abort does not unsafely change HEAD
am: change safe_to_abort()'s not rewinding error into a warning
am: fix filename in safe_to_abort() error message
|
|
Git 2.11 had a minor regression in "merge --ff-only" that competed
with another process that simultanously attempted to update the
index. We used to explain what went wrong with an error message,
but the new code silently failed. The error message has been
resurrected.
* jc/lock-report-on-error:
lockfile: LOCK_REPORT_ON_ERROR
hold_locked_index(): align error handling with hold_lockfile_for_update()
wt-status: implement opportunisitc index update correctly
|
|
Commands that operate on a log message and add lines to the trailer
blocks, such as "format-patch -s", "cherry-pick (-x|-s)", and
"commit -s", have been taught to use the logic of and share the
code with "git interpret-trailer".
* jt/use-trailer-api-in-commands:
sequencer: use trailer's trailer layout
trailer: have function to describe trailer layout
trailer: avoid unnecessary splitting on lines
commit: make ignore_non_trailer take buf/len
trailer: be stricter in parsing separators
|
|
This reverts commit 39784cd3620cc47415c9010ec58a9616f040125c.
The function had only one caller when the "remove useless" was
written, but another topic will soon make heavy use of it and more
importantly the function will return different paths depending on
the value in opts.
|
|
This function is used only once, for the removal of the
directory. It is not used for the creation of the directory nor
anywhere else.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In contrast to "git am --abort", a sequencer abort did not check
whether the current HEAD is the one that is expected. This can lead
to loss of work (when not spotted and resolved using reflog before
the garbage collector chimes in).
This behavior is now changed by mimicking "git am --abort". The
abortion is done but HEAD is not changed when the current HEAD is
not the expected HEAD.
A new file "sequencer/abort-safety" is added to save the expected
HEAD.
The new behavior is only active when --abort is invoked on multiple
picks. The problem does not occur for the single-pick case because
it is handled differently.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
|
|
Make sequencer use trailer.c's trailer layout definition, as opposed to
parsing the footer by itself. This makes "commit -s", "cherry-pick -x",
and "format-patch --signoff" consistent with trailer, allowing
non-trailer lines and multiple-line trailers in trailer blocks under
certain conditions, and therefore suppressing the extra newline in those
cases.
Consistency with trailer extends to respecting trailer configs. Tests
have been included to show that.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix for an error message string.
* js/prepare-sequencer:
i18n: fix unmatched single quote in error message
|
|
Fixed unmatched single quote introduced by commit:
* f56fffef9a sequencer: teach write_message() to append an optional LF
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Silence a clang warning introduced by a recently graduated topic.
* js/prepare-sequencer:
sequencer: silence -Wtautological-constant-out-of-range-compare
|
|
When clang compiles sequencer.c, it complains:
sequencer.c:632:14: warning: comparison of constant 2 with
expression of type 'const enum todo_command' is always
true [-Wtautological-constant-out-of-range-compare]
if (command < ARRAY_SIZE(todo_command_strings))
This is because "command" is an enum that may only have two
values (0 and 1) and the array in question has two elements.
As it turns out, clang is actually wrong here, at least
according to its own bug tracker:
https://llvm.org/bugs/show_bug.cgi?id=16154
But it's still worth working around this, as the warning is
present with -Wall, meaning we fail compilation with "make
DEVELOPER=1".
Casting the enum to size_t sufficiently unconfuses clang. As
a bonus, it also catches any possible out-of-bounds access
if the enum takes on a negative value (which shouldn't
happen either, but again, this is a defensive check).
Signed-off-by: Jeff King <peff@peff.net>
|
|
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
|
|
If i-t-a entries are present and there is no change between the index
and HEAD i-t-a entries, index_differs_from() still returns "dirty, new
entries" (aka, the resulting commit is not empty), but cache-tree will
skip i-t-a entries and produce the exact same tree of current
commit.
index_differs_from() is supposed to catch this so we can abort
git-commit (unless --no-empty is specified). Update it to optionally
ignore i-t-a entries when doing a diff between the index and HEAD so
that it would return "no change" in this case and abort commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was actually only one error message that was not yet marked for
translation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Quite a few error messages touched by this developer during the work to
speed up rebase -i started with an upper case letter, violating our
current conventions. Instead of sneaking in this fix (and forgetting
quite a few error messages), let's just have one wholesale patch fixing
all of the error messages in the sequencer.
While at it, the funny "error: Error wrapping up..." was changed to a
less funny, but more helpful, "error: failed to finalize...".
Pointed out by Junio Hamano.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes the code consistent by fixing quite a couple of error messages.
Suggested by Jakub Narębski.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The definition of this function goes back all the way to 043a449
(sequencer: factor code out of revert builtin, 2012-01-11), long before a
serious effort was made to translate all the error messages.
It is slightly out of the context of the current patch series (whose
purpose it is to re-implement the performance critical parts of the
interactive rebase in C) to make the error messages in the sequencer
translatable, but what the heck. We'll just do it while we're looking at
this part of the code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sequencer was introduced to make the cherry-pick and revert
functionality available as library function, with the original idea
being to extend the sequencer to also implement the rebase -i
functionality.
The test to ensure that all of the commands in the script are identical
to the overall operation does not mesh well with that.
Therefore let's disable the test in rebase -i mode.
While at it, error out early if the "instruction sheet" (i.e. the todo
script) could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit prepares for future callers that will have a pointer/length
to some text to be written that lacks an LF, yet an LF is desired.
Instead of requiring the caller to append an LF to the buffer (and
potentially allocate memory to do so), the write_message() function
learns to append an LF at the end of the file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, we required an strbuf. But that limits the use case too much.
In the upcoming patch series (for which the current patch series prepares
the sequencer), we will want to write content to a file for which we have
a pointer and a length, not an strbuf.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no need to wait until the atexit() handler kicks in at the end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Nothing in the name "write_message()" suggests that the function
releases the strbuf passed to it. So let's release the strbuf in the
caller instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Junio C Hamano
Stephan Beyer
Jonathan Tan
Jiang Xin
Jeff King
Nguyễn Thái Ngọc Duy