| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A common use case for the `--exec` option is to verify that each commit
in a topic branch compiles cleanly, via `git rebase -x make <base>`.
However, when an `exec` in such a rebase fails, it is not re-scheduled,
which in this instance is not particularly helpful.
Let's offer a flag to reschedule failed `exec` commands.
Based on an idea by Paul Morelle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
|
|
The helper function to refresh the cached stat information in the
in-core index has learned to perform the lstat() part of the
operation in parallel on multi-core platforms.
* bp/refresh-index-using-preload:
refresh_index: remove unnecessary calls to preload_index()
speed up refresh_index() by utilizing preload_index()
|
|
Code clean-up for a topic already in 'master'.
* ag/rebase-i-in-c:
sequencer.c: remove a stray semicolon
|
|
Unify code to read the author-script used in "git am" and the
commands that use the sequencer machinery, e.g. "git rebase -i".
* pw/am-rebase-read-author-script:
sequencer: use read_author_script()
add read_author_script() to libgit
am: rename read_author_script()
am: improve author-script error reporting
am: don't die in read_author_script()
|
|
Code readability fix.
* ma/sequencer-do-reset-saner-loop-termination:
sequencer: break out of loop explicitly
|
|
Every once in a while, the interactive rebase makes sure that no stale
files are lying around. These days, we need to include MERGE_HEAD into
that set of files, as the `merge` command will generate them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we detect that a `merge` can be skipped because the merged commit
is already an ancestor of HEAD, we do not need to commit, therefore
writing the MERGE_HEAD file is useless.
It is actually worse than useless: a subsequent `git commit` will pick
it up and think that we want to merge that commit, still.
To avoid that, move the code that writes the MERGE_HEAD file to a
location where we already know that the `merge` cannot be skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With refresh_index() learning to utilize preload_index() to speed up its
operation there is no longer any benefit to having the caller preload the
index first. Remove those unneeded calls by calling read_index() instead of
the preload variant.
There is no measurable performance impact of this patch - the 2nd call to
preload_index() bails out quickly but there is no reason to call it twice.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" learned to take 'b' as the short form of 'break'
option in the todo list.
* js/rebase-i-shortopt:
rebase -i: recognize short commands without arguments
|
|
"git rebase -i" learned a new insn, 'break', that the user can
insert in the to-do list. Upon hitting it, the command returns
control back to the user.
* js/rebase-i-break:
rebase -i: introduce the 'break' command
rebase -i: clarify what happens on a failed `exec`
|
|
Build fix for a topic in flight.
* cb/printf-empty-format:
sequencer: cleanup for gcc warning in non developer mode
|
|
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
|
|
Use the new function added in the last commit to read the author
script, updating read_env_script() and read_author_ident(). We now
have a single code path that reads the author script for am and all
flavors of rebase. This changes the behavior of read_env_script() as
previously it would set any environment variables that were in the
author-script file. Now it is an error if the file contains other
variables or any of GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and
GIT_AUTHOR_DATE are missing. This is what am and the non interactive
version of rebase have been doing for several years so hopefully it
will not cause a problem for interactive rebase users. The advantage
is that we are reusing existing code from am which uses sq_dequote()
to properly dequote variables. This fixes potential problems with user
edited scripts as read_env_script() which did not track quotes
properly.
This commit also removes the fallback code for checking for a broken
author script after git is upgraded when a rebase is stopped. Now that
the parsing uses sq_dequote() it will reliably return an error if the
quoting is broken and the user will have to abort the rebase and
restart. This isn't ideal but it's a corner case and the detection of
the broken quoting could be confused by user edited author scripts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add read_author_script() to sequencer.c based on the implementation in
builtin/am.c and update read_am_author_script() to use
read_author_script(). The sequencer code that reads the author script
will be updated in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It came up in review [1, 2] that this non-idiomatic loop is a bit tricky.
When we find a space, we set `len = i`, which gives us the answer we are
looking for, but which also breaks out of the loop.
It turns out that this loop can confuse compilers as well. My copy of
gcc 7.3.0 realizes that we are essentially evaluating `(len + 1) < len`
and warns that the behavior is undefined if `len` is `INT_MAX`. (Because
the assignment `len = i` is guaranteed to decrease `len`, such undefined
behavior is not actually possible.)
Rewrite the loop to a more idiomatic variant which doesn't muck with
`len` in the loop body. That should help compilers and human readers
figure out what is going on here. But do note that we need to update
`len` since it is not only used just after this loop (where we could
have used `i` directly), but also later in this function.
While at it, reduce the scope of `i`.
[1] https://public-inbox.org/git/CAPig+cQbG2s-LrAo9+7C7=dXifbWFJ3SzuNa-QePHDk7egK=jg@mail.gmail.com/
[2] https://public-inbox.org/git/CAPig+cRjU6niXpT2FrDWZ0x1HmGf1ojVZj3uk2qXEGe-S7i_HQ@mail.gmail.com/
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
as shown by:
sequencer.c: In function ‘write_basic_state’:
sequencer.c:2392:37: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_verbose(), "");
where write_file will create an empty file if told to write an empty string
as can be inferred by the previous call
the somehow more convoluted syntax works around the issue by providing a non
empty format string and is already being used for the abort safety file since
1e41229d96 ("sequencer: make sequencer abort safer", 2016-12-07)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sequencer instruction 'b', short for 'break', is rejected:
error: invalid line 2: b
The reason is that the parser expects all short commands to have
an argument. Permit short commands without arguments.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" learns to show progress bar when refreshing the index
takes a long time.
* nd/status-refresh-progress:
status: show progress bar if refreshing the index takes too long
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
Code clean-up.
* rs/sequencer-oidset-insert-avoids-dups:
sequencer: use return value of oidset_insert()
|
|
The 'edit' command can be used to cherry-pick a commit and then
immediately drop out of the interactive rebase, with exit code 0, to let
the user amend the commit, or test it, or look around.
Sometimes this functionality would come in handy *without*
cherry-picking a commit, e.g. to interrupt the interactive rebase even
before cherry-picking a commit, or immediately after an 'exec' or a
'merge'.
This commit introduces that functionality, as the spanking new 'break'
command.
Suggested-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
oidset_insert() returns 1 if the object ID is already in the set and
doesn't add it again, or 0 if it hadn't been present. Make use of that
fact instead of checking with an extra oidset_contains() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
|
|
"git rebase -i" did not clear the state files correctly when a run
of "squash/fixup" is aborted and then the user manually amended the
commit instead, which has been corrected.
* js/rebase-i-autosquash-fix:
rebase -i: be careful to wrap up fixup/squash chains
rebase -i --autosquash: demonstrate a problem skipping the last squash
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reason rerere(), rerere_forget() and rerere_remaining() take a
struct repository instead of struct index_state is not obvious from
the patch:
Deep in update_paths() and find_conflict(), hold_locked_index() and
read_index() are called. These functions assumes the index path at
$GIT_DIR/index which is not always true when you take an arbitrary
index state. Taking a repository will allow us to point to the right
index path later when we replace them with repo_ versions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
|
|
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
|
|
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
|
|
Refreshing the index is usually very fast, but it can still take a
long time sometimes. Cold cache is one. Or copying a repo to a new
place (*). It's good to show something to let the user know "git
status" is not hanging, it's just busy doing something.
(*) In this case, all stat info in the index becomes invalid and git
falls back to rehashing all file content to see if there's any
difference between updating stat info in the index. This is quite
expensive. Even with a repo as small as git.git, it takes 3
seconds.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27), several arguments were given for transplanting
empty commits without halting and asking the user for confirmation on
each commit. These arguments were incomplete because the logic clearly
assumed the only cases under consideration were transplanting of commits
with empty messages (see the comment about "There are two sources for
commits with empty messages). It didn't discuss or even consider
rewords, squashes, etc. where the user is explicitly asked for a new
commit message and provides an empty one. (My bad, I totally should
have thought about that at the time, but just didn't.)
Rewords and squashes are significantly different, though, as described
by SZEDER:
Let's suppose you start an interactive rebase, choose a commit to
squash, save the instruction sheet, rebase fires up your editor, and
then you notice that you mistakenly chose the wrong commit to
squash. What do you do, how do you abort?
Before [that commit] you could clear the commit message, exit the
editor, and then rebase would say "Aborting commit due to empty
commit message.", and you get to run 'git rebase --abort', and start
over.
But [since that commit, ...] saving the commit message as is would
let rebase continue and create a bunch of unnecessary objects, and
then you would have to use the reflog to return to the pre-rebase
state.
Also, he states:
The instructions in the commit message template, which is shown for
'reword' and 'squash', too, still say...
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
These are sound arguments that when editing commit messages during a
sequencer operation, that if the commit message is empty then the
operation should halt and ask the user to correct. The arguments in
commit b00bf1c9a8dd (referenced above) still apply when transplanting
previously created commits with empty commit messages, so the sequencer
should not halt for those.
Furthermore, all rationale so far applies equally for cherry-pick as for
rebase. Therefore, make the code default to --allow-empty-message when
transplanting an existing commit, and to default to halting when the
user is asked to edit a commit message and provides an empty one -- for
both rebase and cherry-pick.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
|
|
When an interactive rebase was stopped at the end of a fixup/squash
chain, the user might have edited the commit manually before continuing
(with either `git rebase --skip` or `git rebase --continue`, it does not
really matter which).
We need to be very careful to wrap up the fixup/squash chain also in
this scenario: otherwise the next fixup/squash chain would try to pick
up where the previous one was left.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
This rewrites write_basic_state() from git-rebase.sh in C. This is the
first step in the conversion of init_basic_state(), hence the mode in
rebase--helper.c is called INIT_BASIC_STATE. init_basic_state() will be
converted in the next commit.
The part of read_strategy_opts() that parses the stategy options is
moved to a new function to allow its use in rebase--helper.c.
Finally, the call to write_basic_state() is removed from
git-rebase--interactive.sh, replaced by a call to `--init-basic-state`.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This removes the modes `--skip-unnecessary-picks`, `--append-todo-help`,
and `--checkout-onto` from rebase--helper.c, the functions of
git-rebase--interactive.sh that were rendered useless by the rewrite of
complete_action(), and append_todo_help_to_file() from
rebase-interactive.c.
skip_unnecessary_picks() and checkout_onto() becomes static, as they are
only used inside of the sequencer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This rewrites complete_action() from shell to C.
A new mode is added to rebase--helper (`--complete-action`), as well as
a new flag (`--autosquash`).
Finally, complete_action() is stripped from git-rebase--interactive.sh.
The original complete_action() would return the code 2 when the todo
list contained no actions. This was a special case for rebase -i and
-p; git-rebase.sh would then apply the autostash, delete the state
directory, and die with the message "Nothing to do". This cleanup is
rewritten in C instead of returning 2. As rebase -i no longer returns
2, the comment describing this behaviour in git-rebase.sh is updated to
reflect this change.
The message "Nothing to do" is now printed with error(), and so becomes
"error: nothing to do". Some tests in t3404 check this value, so they
are updated to fit this change.
The first check might seem useless as we write "noop" to the todo list
if it is empty. Actually, the todo list might contain commented
commands (ie. empty commits). In this case, complete_action() won’t
write "noop", and will abort without starting the editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes we want to suppress a coccinelle transformation
inside a particular function. For example, in finding
conversions of hashcmp() to oidcmp(), we should not convert
the call in oidcmp() itself, since that would cause infinite
recursion. We write that like this:
@@
identifier f != oidcmp;
expression E1, E2;
@@
f(...) {...
- hashcmp(E1->hash, E2->hash)
+ oidcmp(E1, E2)
...}
to match the interior of any function _except_ oidcmp().
Unfortunately, this doesn't catch all cases (e.g., the one
in sequencer.c that this patch fixes). The problem, as
explained by one of the Coccinelle developers in [1], is:
For transformation, A ... B requires that B occur on every
execution path starting with A, unless that execution path
ends up in error handling code. (eg, if (...) { ...
return; }). Here your A is the start of the function. So
you need a call to hashcmp on every path through the
function, which fails when you add ifs.
[...]
Another issue with A ... B is that by default A and B
should not appear in the matched region. So your original
rule matches only the case where every execution path
contains exactly one call to hashcmp, not more than one.
One way to solve this is to put the pattern inside an
angle-bracket pattern like "<... P ...>", which allows zero
or more matches of P. That works (and is what this patch
does), but it has one drawback: it matches more than we care
about, and Coccinelle uses extra CPU. Here are timings for
"make coccicheck" before and after this patch:
[before]
real 1m27.122s
user 7m34.451s
sys 0m37.330s
[after]
real 2m18.040s
user 10m58.310s
sys 0m41.549s
That's not ideal, but it's more important for this to be
correct than to be fast. And coccicheck is already fairly
slow (and people don't run it for every single patch). So
it's an acceptable tradeoff.
There _is_ a better way to do it, which is to record the
position at which we find hashcmp(), and then check it
against the forbidden function list. Like:
@@
position p : script:python() { p[0].current_element != "oidcmp" };
expression E1,E2;
@@
- hashcmp@p(E1->hash, E2->hash)
+ oidcmp(E1, E2)
This is only a little slower than the current code, and does
the right thing in all cases. Unfortunately, not all builds
of Coccinelle include python support (including the ones in
Debian). Requiring it may mean that fewer people can easily
run the tool, which is worse than it simply being a little
slower.
We may want to revisit this decision in the future if:
- builds with python become more common
- we find more uses for python support that tip the
cost-benefit analysis
But for now this patch sticks with the angle-bracket
solution, and converts all existing cocci patches. This
fixes only one missed case in the current code, though it
makes a much better difference for some new rules I'm adding
(converting "!hashcmp()" to "hasheq()" misses over half the
possible conversions using the old form).
[1] https://public-inbox.org/git/alpine.DEB.2.21.1808240652370.2344@hadrien/
Helped-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The append_signoff() function takes an "int" to specify the
number of bytes to ignore. Most callers just pass 0, and the
remainder use ignore_non_trailer() to skip over cruft.
That function also returns an int, and uses them internally.
On systems where size_t is larger than an int (i.e., most
64-bit systems), dealing with a ridiculously large commit
message could end up overflowing an int, producing
surprising results (e.g., returning a negative offset, which
would cause us to look outside the original string).
Let's consistently use size_t for these offsets through this
whole stack. As a bonus, this makes the meaning of
"ignore_footer" as an offset (and not a boolean) more clear.
But while we're here, let's also document the interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the sequencer code appends a signoff or cherry-pick
origin, it uses the default trailer-parsing options, which
treat "---" as the end of the commit message. As a result,
it may be fooled by a commit message that contains that
string and fail to find the existing trailer block. Even
more confusing, the actual append code does not know about
"---", and always appends to the end of the string. This can
lead to bizarre results. E.g., appending a signoff to a
commit message like this:
subject
body
---
these dashes confuse the parser!
Signed-off-by: A
results in output with a final block like:
Signed-off-by: A
Signed-off-by: A
The parser thinks the final line of the message is "body",
and ignores everything else, claiming there are no trailers.
So we output an extra newline separator (wrong) and add a
duplicate signoff (also wrong).
Since we know we are feeding a pure commit message, we can
simply tell the parser to ignore the "---" divider.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the trailer code has an "opts" struct which is
filled in by the caller. We don't pass it down to
trailer_info_get(), which does the initial parsing, because
there hasn't yet been a need to do so.
Let's start passing it down in preparation for adding new
options. Note that there's a single caller which doesn't
otherwise have such an options struct. Since it's just one
caller (that we'd have to modify anyway), let's not bother
with any special treatment like accepting a NULL options
struct, and just have it allocate one with the defaults.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We store the length of the trailers list in a size_t. So on
a 64-bit system with a 32-bit int, in the unlikely case that
we manage to actually allocate a list with 2^31 entries,
we'd loop forever trying to iterate over it (our "int" would
wrap to negative before exceeding info->trailer_nr).
This probably doesn't matter in practice. Each entry is at
least a pointer plus a non-empty string, so even without
malloc overhead or the memory to hold the original string
we're parsing from, you'd need to allocate tens of
gigabytes. But it's easy enough to do it right.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i", when a 'merge <branch>' insn in its todo list
fails, segfaulted, which has been (minimally) corrected.
* pw/rebase-i-merge-segv-fix:
rebase -i: fix SIGSEGV when 'merge <branch>' fails
t3430: add conflicting commit
|
|
When "git rebase -i" is told to squash two or more commits into
one, it labeled the log message for each commit with its number.
It correctly called the first one "1st commit", but the next one
was "commit #1", which was off-by-one. This has been corrected.
* pw/rebase-i-squash-number-fix:
rebase -i: fix numbering in squash message
|
|
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
|
Johannes Schindelin
Junio C Hamano
Ben Peart
Nguyễn Thái Ngọc Duy
Phillip Wood
Martin Ågren
Carlo Marcelo Arenas Belón
Johannes Sixt
René Scharfe
Elijah Newren
Alban Gruin
Jeff King
Jean-Noël Avila