summaryrefslogtreecommitdiff
path: root/run-command.h
AgeCommit message (Collapse)AuthorFilesLines
2014-05-15run-command: store an optional argv_arrayLibravatar Jeff King1-0/+3
All child_process structs need to point to an argv. For flexibility, we do not mandate the use of a dynamic argv_array. However, because the child_process does not own the memory, this can make memory management with a separate argv_array difficult. For example, if a function calls start_command but not finish_command, the argv memory must persist. The code needs to arrange to clean up the argv_array separately after finish_command runs. As a result, some of our code in this situation just leaks the memory. To help such cases, this patch adds a built-in argv_array to the child_process, which gets cleaned up automatically (both in finish_command and when start_command fails). Callers may use it if they choose, but can continue to use the raw argv if they wish. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-18run-command: mark run_hook_with_custom_index as deprecatedLibravatar Benoit Pierre1-0/+1
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-18commit: fix patch hunk editing with "commit -p -m"Libravatar Benoit Pierre1-1/+5
Don't change git environment: move the GIT_EDITOR=":" override to the hook command subprocess, like it's already done for GIT_INDEX_FILE. Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-19Add the LAST_ARG_MUST_BE_NULL macroLibravatar Ramsay Jones1-1/+1
The sentinel function attribute is not understood by versions of the gcc compiler prior to v4.0. At present, for earlier versions of gcc, the build issues 108 warnings related to the unknown attribute. In order to suppress the warnings, we conditionally define the LAST_ARG_MUST_BE_NULL macro to provide the sentinel attribute for gcc v4.0 and newer. Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09use "sentinel" function attribute for variadic listsLibravatar Jeff King1-0/+1
This attribute can help gcc notice when callers forget to add a NULL sentinel to the end of the function. This is our first use of the sentinel attribute, but we shouldn't need to #ifdef for other compilers, as __attribute__ is already a no-op on non-gcc-compatible compilers. Suggested-by: Bert Wesarg <bert.wesarg@googlemail.com> More-Spots-Found-By: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-14hooks: Add function to check if a hook existsLibravatar Aaron Schrab1-0/+1
Create find_hook() function to determine if a given hook exists and is executable. If it is, the path to the script will be returned, otherwise NULL is returned. This encapsulates the tests that are used to check for the existence of a hook in one place, making it easier to modify those checks if that is found to be necessary. This also makes it simple for places that can use a hook to check if a hook exists before doing, possibly lengthy, setup work which would be pointless if no such hook is present. The returned value is left as a static value from get_pathname() rather than a duplicate because it is anticipated that the return value will either be used as a boolean, immediately added to an argv_array list which would result in it being duplicated at that point, or used to actually run the command without much intervening work. Callers which need to hold onto the returned value for a longer time are expected to duplicate the return value themselves. Signed-off-by: Aaron Schrab <aaron@schrab.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-05pager: drop "wait for output to run less" hackLibravatar Jeff King1-1/+0
Commit 35ce862 (pager: Work around window resizing bug in 'less', 2007-01-24) causes git's pager sub-process to wait to receive input after forking but before exec-ing the pager. To handle this, run-command had to grow a "pre-exec callback" feature. Unfortunately, this feature does not work at all on Windows (where we do not fork), and interacts poorly with run-command's parent notification system. Its use should be discouraged. The bug in less was fixed in version 406, which was released in June 2007. It is probably safe at this point to remove our workaround. That lets us rip out the preexec_cb feature entirely. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08dashed externals: kill children on exitLibravatar Clemens Buchacher1-0/+1
Several git commands are so-called dashed externals, that is commands executed as a child process of the git wrapper command. If the git wrapper is killed by a signal, the child process will continue to run. This is different from internal commands, which always die with the git wrapper command. Enable the recently introduced cleanup mechanism for child processes in order to make dashed externals act more in line with internal commands. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08run-command: optionally kill children on exitLibravatar Jeff King1-0/+1
When we spawn a helper process, it should generally be done and finish_command called before we exit. However, if we exit abnormally due to an early return or a signal, the helper may continue to run in our absence. In the best case, this may simply be wasted CPU cycles or a few stray messages on a terminal. But it could also mean a process that the user thought was aborted continues to run to completion (e.g., a push's pack-objects helper will complete the push, even though you killed the push process). This patch provides infrastructure for run-command to keep track of PIDs to be killed, and clean them on signal reception or input, just as we do with tempfiles. PIDs can be added in two ways: 1. If NO_PTHREADS is defined, async helper processes are automatically marked. By definition this code must be ready to die when the parent dies, since it may be implemented as a thread of the parent process. 2. If the run-command caller specifies the "clean_on_exit" option. This is not the default, as there are cases where it is OK for the child to outlive us (e.g., when spawning a pager). PIDs are cleared from the kill-list automatically during wait_or_whine, which is called from finish_command and finish_async. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-10Enable threaded async procedures whenever pthreads is availableLibravatar Johannes Sixt1-2/+2
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-07Reimplement async procedures using pthreadsLibravatar Johannes Sixt1-2/+6
On Windows, async procedures have always been run in threads, and the implementation used Windows specific APIs. Rewrite the code to use pthreads. A new configuration option is introduced so that the threaded implementation can also be used on POSIX systems. Since this option is intended only as playground on POSIX, but is mandatory on Windows, the option is not documented. One detail is that on POSIX it is necessary to set FD_CLOEXEC on the pipe handles. On Windows, this is not needed because pipe handles are not inherited to child processes, and the new calls to set_cloexec() are effectively no-ops. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-05Merge branch 'sp/maint-push-sideband' into sp/push-sidebandLibravatar Junio C Hamano1-4/+7
* sp/maint-push-sideband: receive-pack: Send hook output over side band #2 receive-pack: Wrap status reports inside side-band-64k receive-pack: Refactor how capabilities are shown to the client send-pack: demultiplex a sideband stream with status data run-command: support custom fd-set in async run-command: Allow stderr to be a caller supplied pipe Update git fsck --full short description to mention packs Conflicts: run-command.c
2010-02-05run-command: support custom fd-set in asyncLibravatar Erik Faye-Lund1-3/+6
This patch adds the possibility to supply a set of non-0 file descriptors for async process communication instead of the default-created pipe. Additionally, we now support bi-directional communiction with the async procedure, by giving the async function both read and write file descriptors. To retain compatiblity and similar "API feel" with start_command, we require start_async callers to set .out = -1 to get a readable file descriptor. If either of .in or .out is 0, we supply no file descriptor to the async process. [sp: Note: Erik started this patch, and a huge bulk of it is his work. All bugs were introduced later by Shawn.] Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-05run-command: Allow stderr to be a caller supplied pipeLibravatar Shawn O. Pearce1-1/+1
Like .out, .err may now be set to a file descriptor > 0, which is a writable pipe/socket/file that the child's stderr will be redirected into. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01run-command: add "use shell" optionLibravatar Jeff King1-0/+2
Many callsites run "sh -c $CMD" to run $CMD. We can make it a little simpler for them by factoring out the munging of argv. For simple cases with no arguments, this doesn't help much, but: 1. For cases with arguments, we save the caller from having to build the appropriate shell snippet. 2. We can later optimize to avoid the shell when there are no metacharacters in the program. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-18Test for WIN32 instead of __MINGW32_Libravatar Frank Li1-1/+1
The code which is conditional on MinGW32 is actually conditional on Windows. Use the WIN32 symbol, which is defined by the MINGW32 and MSVC environments, but not by Cygwin. Define SNPRINTF_SIZE_CORR=1 for MSVC too, as its vsnprintf function does not add NUL at the end of the buffer if the result fits the buffer size exactly. Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-06run_command: report failure to execute the program, but optionally don'tLibravatar Johannes Sixt1-0/+2
In the case where a program was not found, it was still the task of the caller to report an error to the user. Usually, this is an interesting case but only few callers actually reported a specific error (though many call sites report a generic error message regardless of the cause). With this change the error is reported by run_command, but since there is one call site in git.c that does not want that, an option is added to struct child_process, which is used to turn the error off. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-06run_command: report system call errors instead of returning error codesLibravatar Johannes Sixt1-10/+0
The motivation for this change is that system call failures are serious errors that should be reported to the user, but only few callers took the burden to decode the error codes that the functions returned into error messages. If at all, then only an unspecific error message was given. A prominent example is this: $ git upload-pack . | : fatal: unable to run 'git-upload-pack' In this example, git-upload-pack, the external command invoked through the git wrapper, dies due to SIGPIPE, but the git wrapper does not bother to report the real cause. In fact, this very error message is copied to the syslog if git-daemon's client aborts the connection early. With this change, system call failures are reported immediately after the failure and only a generic failure code is returned to the caller. In the above example the error is now to the point: $ git upload-pack . | : error: git-upload-pack died of signal Note that there is no error report if the invoked program terminated with a non-zero exit code, because it is reasonable to expect that the invoked program has already reported an error. (But many run_command call sites nevertheless write a generic error message.) There was one special return code that was used to identify the case where run_command failed because the requested program could not be exec'd. This special case is now treated like a system call failure with errno set to ENOENT. No error is reported in this case, because the call site in git.c expects this as a normal result. Therefore, the callers that carefully decoded the return value still check for this condition. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-05run_command: return exit code as positive valueLibravatar Johannes Sixt1-1/+0
As a general guideline, functions in git's code return zero to indicate success and negative values to indicate failure. The run_command family of functions followed this guideline. But there are actually two different kinds of failure: - failures of system calls; - non-zero exit code of the program that was run. Usually, a non-zero exit code of the program is a failure and means a failure to the caller. Except that sometimes it does not. For example, the exit code of merge programs (e.g. external merge drivers) conveys information about how the merge failed, and not all exit calls are actually failures. Furthermore, the return value of run_command is sometimes used as exit code by the caller. This change arranges that the exit code of the program is returned as a positive value, which can now be regarded as the "result" of the function. System call failures continue to be reported as negative values. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-01fix portability problem with IS_RUN_COMMAND_ERRLibravatar Jeff King1-1/+1
Some old versions of gcc don't seem to like us negating an enum constant. Let's work around it by negating the other half of the comparison instead. Reported by Pierre Poissinger on gcc 2.9. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-03Merge branch 'jk/maint-cleanup-after-exec-failure'Libravatar Junio C Hamano1-0/+1
* jk/maint-cleanup-after-exec-failure: git: use run_command() to execute dashed externals run_command(): help callers distinguish errors run_command(): handle missing command errors more gracefully git: s/run_command/run_builtin/
2009-01-28run_command(): help callers distinguish errorsLibravatar Jeff King1-0/+1
run_command() returns a single integer specifying either an error code or the exit status of the spawned program. The only way to tell the difference is that the error codes are outside of the allowed range of exit status values. Rather than make each caller implement the test against a magic limit, let's provide a macro. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-17Move run_hook() from builtin-commit.c into run-command.c (libgit)Libravatar Stephan Beyer1-0/+2
A function that runs a hook is used in several Git commands. builtin-commit.c has the one that is most general for cases without piping. The one in builtin-gc.c prints some useful warnings. This patch moves a merged version of these variants into libgit and lets the other builtins use this libified run_hook(). The run_hook() function used in receive-pack.c feeds the standard input of the pre-receive or post-receive hooks. This function is renamed to run_receive_hook() because the libified run_hook() cannot handle this. Mentored-by: Daniel Barkalow <barkalow@iabervon.org> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-02run-command.c: remove run_command_v_opt_cd()Libravatar Nanako Shiraishi1-1/+0
This function is not used anywhere. Johannes Sixt <johannes.sixt@telecom.at>: > Future callers can use run_command_v_opt_cd_env() instead. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-07-25run-command: add pre-exec callbackLibravatar Jeff King1-0/+1
This is a function provided by the caller which is called _after_ the process is forked, but before the spawned program is executed. On platforms (like mingw) where subprocesses are forked and executed in a single call, the preexec callback is simply ignored. This will be used in the following patch to do some setup for 'less' that must happen in the forked child. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-26Windows: Implement asynchronous functions as threads.Libravatar Johannes Sixt1-0/+5
In upload-pack we must explicitly close the output channel of rev-list. (On Unix, the channel is closed automatically because process that runs rev-list terminates.) Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
2008-02-23start_command(), if .in/.out > 0, closes file descriptors, not the callersLibravatar Johannes Sixt1-0/+18
Callers of start_command() can set the members .in and .out of struct child_process to a value > 0 to specify that this descriptor is used as the stdin or stdout of the child process. Previously, if start_command() was successful, this descriptor was closed upon return. Here we now make sure that the descriptor is also closed in case of failures. All callers are updated not to close the file descriptor themselves after start_command() was called. Note that earlier run_gpg_verify() of git-verify-tag set .out = 1, which worked because start_command() treated this as a special case, but now this is incorrect because it closes the descriptor. The intent here is to inherit stdout to the child, which is achieved by .out = 0. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-23start_command(), .in/.out/.err = -1: Callers must close the file descriptorLibravatar Johannes Sixt1-2/+0
By setting .in, .out, or .err members of struct child_process to -1, the callers of start_command() can request that a pipe is allocated that talks to the child process and one end is returned by replacing -1 with the file descriptor. Previously, a flag was set (for .in and .out, but not .err) to signal finish_command() to close the pipe end that start_command() had handed out, so it was optional for callers to close the pipe, and many already do so. Now we make it mandatory to close the pipe. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-11run-command: Support sending stderr to /dev/nullLibravatar Shawn O. Pearce1-0/+1
Some callers may wish to redirect stderr to /dev/null in some contexts, such as if they are executing a command only to get the exit status and don't want users to see whatever output it may produce as a side-effect of computing that exit status. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-21Add infrastructure to run a function asynchronously.Libravatar Johannes Sixt1-0/+22
This adds start_async() and finish_async(), which runs a function asynchronously. Communication with the caller happens only via pipes. For this reason, this implementation forks off a child process that runs the function. [sp: Style nit fixed by removing unnecessary block on if condition inside of start_async()] Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-21Have start_command() create a pipe to read the stderr of the child.Libravatar Johannes Sixt1-0/+1
This adds another stanza that allocates a pipe that is connected to the child's stderr and that the caller can read from. In order to request this pipe, the caller sets cmd->err to -1. The implementation is not exactly modeled after the stdout case: For stdout the caller can supply an existing file descriptor, but this facility is nowhere needed in the stderr case. Additionally, the caller is required to close cmd->err. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-23Allow environment variables to be unset in the processes started by run_commandLibravatar Alex Riesen1-0/+5
To unset a variable, just specify its name, without "=". For example: const char *env[] = {"GIT_DIR=.git", "PWD", NULL}; const char *argv[] = {"git-ls-files", "-s", NULL}; int err = run_command_v_opt_cd_env(argv, RUN_GIT_CMD, ".", env); The PWD will be unset before executing git-ls-files. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-23Add ability to specify environment extension to run_commandLibravatar Alex Riesen1-0/+2
There is no way to specify and override for the environment: there'd be no user for it yet. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-23Add run_command_v_opt_cd: chdir into a directory before execLibravatar Alex Riesen1-0/+2
It can make code simplier (no need to preserve cwd) and safer (no chance the cwd of the current process is accidentally forgotten). Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-12Teach run-command to redirect stdout to /dev/nullLibravatar Shawn O. Pearce1-0/+1
Some run-command callers may wish to just discard any data that is sent to stdout from the child. This is a lot like our existing no_stdin support, we just open /dev/null and duplicate the descriptor into position. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-12Teach run-command about stdout redirectionLibravatar Shawn O. Pearce1-0/+2
Some potential callers of the run_command family of functions need to control not only the stdin redirection of the child, but also the stdout redirection of the child. This can now be setup much like the already existing stdin redirection. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-11Teach run_command how to setup a stdin pipeLibravatar Shawn O. Pearce1-0/+3
Sometimes callers trying to use run_command to execute a child process will want to setup a pipe or file descriptor to redirect into the child's stdin. This idea is completely stolen from builtin-bundle's fork_with_pipe, written by Johannes Schindelin. All credit (and blame) should lie with Dscho. ;-) Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-11Split run_command into two halves (start/finish)Libravatar Shawn O. Pearce1-0/+3
If the calling process wants to send data to stdin of a child process it will need to arrange for a pipe and get the child process running, feed data to it, then wait for the child process to finish. So we split the run function into two halves, allowing callers to first start the child then later finish it. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-11Start defining a more sophisticated run_commandLibravatar Shawn O. Pearce1-0/+9
There are a number of places where we do some variation of fork()+exec() but we also need to setup redirection in the process, much like what run_command does for us already with its option flags. It would be nice to reuse more of the run_command logic, especially as that non-fork API helps us to port to odd platforms like Win32. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-11Remove unused run_command variantsLibravatar Shawn O. Pearce1-4/+0
We don't actually use these va_list based variants of run_command anymore. I'm removing them before I make further improvements. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-30Use /dev/null for update hook stdin.Libravatar Shawn O. Pearce1-1/+1
Currently the update hook invoked by receive-pack has its stdin connected to the pushing client. The hook shouldn't attempt to read from this stream, and doing so may consume data that was meant for receive-pack. Instead we should give the update hook /dev/null as its stdin, ensuring that it always receives EOF and doesn't disrupt the protocol if it attempts to read any data. The post-update hook is similar, as it gets invoked with /dev/null on stdin to prevent the hook from reading data from the client. Previously we had invoked it with stdout also connected to /dev/null, throwing away anything on stdout, to prevent client protocol errors. Instead we should redirect stdout to stderr, like we do with the update hook. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-30Redirect update hook stdout to stderr.Libravatar Shawn O. Pearce1-0/+2
If an update hook outputs to stdout then that output will be sent back over the wire to the push client as though it were part of the git protocol. This tends to cause protocol errors on the client end of the connection, as the hook output is not expected in that context. Most hook developers work around this by making sure their hook outputs everything to stderr. But hooks shouldn't need to perform such special behavior. Instead we can just dup stderr to stdout prior to invoking the update hook. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-30Remove unnecessary argc parameter from run_command_v.Libravatar Shawn O. Pearce1-2/+2
The argc parameter is never used by the run_command_v family of functions. Instead they require that the passed argv[] be NULL terminated so they can rely on the operating system's execvp function to correctly pass the arguments to the new process. Making the caller pass the argc is just confusing, as the caller could be mislead into believing that the argc might take precendece over the argv, or that the argv does not need to be NULL terminated. So goodbye argc. Don't come back. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-05Const tightening.Libravatar Junio C Hamano1-2/+2
Mark Wooding noticed there was a type mismatch warning in git.c; this patch does things slightly differently (mostly tightening const) and was what I was holding onto, waiting for the setup-revisions change to be merged into the master branch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-13Exec git programs without using PATH.Libravatar Michal Ostrowski1-1/+1
The git suite may not be in PATH (and thus programs such as git-send-pack could not exec git-rev-list). Thus there is a need for logic that will locate these programs. Modifying PATH is not desirable as it result in behavior differing from the user's intentions, as we may end up prepending "/usr/bin" to PATH. - git C programs will use exec*_git_cmd() APIs to exec sub-commands. - exec*_git_cmd() will execute a git program by searching for it in the following directories: 1. --exec-path (as used by "git") 2. The GIT_EXEC_PATH environment variable. 3. $(gitexecdir) as set in Makefile (default value $(bindir)). - git wrapper will modify PATH as before to enable shell scripts to invoke "git-foo" commands. Ideally, shell scripts should use the git wrapper to become independent of PATH, and then modifying PATH will not be necessary. [jc: with minor updates after a brief review.] Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-07Clean up file descriptors when calling hooks.Libravatar Daniel Barkalow1-0/+3
When calling post-update hook, don't leave stdin and stdout connected to the pushing connection. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-02receive-pack hooks updates.Libravatar Junio C Hamano1-0/+1
The earlier one conflated update and post-update hooks for no good reason. Correct that ugly hack. Now post-update hooks will take the list of successfully updated refs. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-31[PATCH] Added hook in git-receive-packLibravatar Josef Weidendorfer1-0/+16
Just before updating a ref, $GIT_DIR/hooks/update refname old-sha1 new-sha1 is called if executable. The hook can decline the ref to be updated by exiting with a non-zero status, or allow it to be updated by exiting with a zero status. The mechanism also allows e.g sending of a mail with pushed commits on the remote repository. Documentation update with an example hook is included. jc: The credits of the basic idea and initial implementation go to Josef, but I ended up rewriting major parts of his patch, so bugs are all mine. Also I changed the semantics for the hook from his original version (which were post-update hook) so that the hook can optionally decline to update the ref, and also can be used to implement the overall cleanups. The latter was primarily to implement a suggestion from Linus that calling update-server-info should be made optional. Signed-off-by: Junio C Hamano <junkio@cox.net>