summaryrefslogtreecommitdiff
path: root/run-command.c
AgeCommit message (Collapse)AuthorFilesLines
2017-02-02Merge branch 'js/mingw-hooks-with-exe-suffix'Libravatar Junio C Hamano1-1/+7
Names of the various hook scripts must be spelled exactly, but on Windows, an .exe binary must be named with .exe suffix; notice $GIT_DIR/hooks/<hookname>.exe as a valid <hookname> hook. * js/mingw-hooks-with-exe-suffix: mingw: allow hooks to be .exe files
2017-01-30mingw: allow hooks to be .exe filesLibravatar Johannes Schindelin1-1/+7
Executable files in Windows need to have the extension '.exe', otherwise they do not work. Extend the hooks to not just look at the hard coded names, but also at the names extended by the custom STRIP_EXTENSION, which is defined as '.exe' in Windows. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-09execv_dashed_external: wait for child on signal deathLibravatar Jeff King1-0/+19
When you hit ^C to interrupt a git command going to a pager, this usually leaves the pager running. But when a dashed external is in use, the pager ends up in a funny state and quits (but only after eating one more character from the terminal!). This fixes it. Explaining the reason will require a little background. When git runs a pager, it's important for the git process to hang around and wait for the pager to finish, even though it has no more data to feed it. This is because git spawns the pager as a child, and thus the git process is the session leader on the terminal. After it dies, the pager will finish its current read from the terminal (eating the one character), and then get EIO trying to read again. When you hit ^C, that sends SIGINT to git and to the pager, and it's a similar situation. The pager ignores it, but the git process needs to hang around until the pager is done. We addressed that long ago in a3da882120 (pager: do wait_for_pager on signal death, 2009-01-22). But when you have a dashed external (or an alias pointing to a builtin, which will re-exec git for the builtin), there's an extra process in the mix. For instance, running: $ git -c alias.l=log l will end up with a process tree like: git (parent) \ git-log (child) \ less (pager) If you hit ^C, SIGINT goes to all of them. The pager ignores it, and the child git process will end up in wait_for_pager(). But the parent git process will die, and the usual EIO trouble happens. So we really want the parent git process to wait_for_pager(), but of course it doesn't know anything about the pager at all, since it was started by the child. However, we can have it wait on the git-log child, which in turn is waiting on the pager. And that's what this patch does. There are a few design decisions here worth explaining: 1. The new feature is attached to run-command's clean_on_exit feature. Partly this is convenience, since that feature already has a signal handler that deals with child cleanup. But it's also a meaningful connection. The main reason that dashed externals use clean_on_exit is to bind the two processes together. If somebody kills the parent with a signal, we propagate that to the child (in this instance with SIGINT, we do propagate but it doesn't matter because the original signal went to the whole process group). Likewise, we do not want the parent to go away until the child has done so. In a traditional Unix world, we'd probably accomplish this binding by just having the parent execve() the child directly. But since that doesn't work on Windows, everything goes through run_command's more spawn-like interface. 2. We do _not_ automatically waitpid() on any clean_on_exit children. For dashed externals this makes sense; we know that the parent is doing nothing but waiting for the child to exit anyway. But with other children, it's possible that the child, after getting the signal, could be waiting on the parent to do something (like closing a descriptor). If we were to wait on such a child, we'd end up in a deadlock. So this errs on the side of caution, and lets callers enable the feature explicitly. 3. When we send children the cleanup signal, we send all the signals first, before waiting on any children. This is to avoid the case where one child might be waiting on another one to exit, causing a deadlock. We inform all of them that it's time to die before reaping any. In practice, there is only ever one dashed external run from a given process, so this doesn't matter much now. But it future-proofs us if other callers start using the wait_after_clean mechanism. There's no automated test here, because it would end up racy and unportable. But it's easy to reproduce the situation by running the log command given above and hitting ^C. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-17run-command: add clean_on_exit_handlerLibravatar Lars Schneider1-4/+18
Some processes might want to perform cleanup tasks before Git kills them due to the 'clean_on_exit' flag. Let's give them an interface for doing this. The feature is used in a subsequent patch. Please note, that the cleanup callback is not executed if Git dies of a signal. The reason is that only "async-signal-safe" functions would be allowed to be call in that case. Since we cannot control what functions the callback will use, we will not support the case. See 507d7804 for more details. Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-17run-command: move check_pipe() from write_or_die to run_commandLibravatar Lars Schneider1-2/+15
Move check_pipe() to run_command and make it public. This is necessary to call the function from pkt-line in a subsequent patch. While at it, make async_exit() static to run_command.c as it is no longer used from outside. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-19Merge branch 'ab/hooks'Libravatar Junio C Hamano1-4/+1
"git rev-parse --git-path hooks/<hook>" learned to take core.hooksPath configuration variable (introduced during 2.9 cycle) into account. * ab/hooks: rev-parse: respect core.hooksPath in --git-path
2016-08-16rev-parse: respect core.hooksPath in --git-pathLibravatar Johannes Schindelin1-4/+1
The idea of the --git-path option is not only to avoid having to prefix paths with the output of --git-dir all the time, but also to respect overrides for specific common paths inside the .git directory (e.g. `git rev-parse --git-path objects` will report the value of the environment variable GIT_OBJECT_DIRECTORY, if set). When introducing the core.hooksPath setting, we forgot to adjust git_path() accordingly. This patch fixes that. While at it, revert the special-casing of core.hooksPath in run-command.c, as it is now no longer needed. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17run-command: add pipe_command helperLibravatar Jeff King1-5/+147
We already have capture_command(), which captures the stdout of a command in a way that avoids deadlocks. But sometimes we need to do more I/O, like capturing stderr as well, or sending data to stdin. It's easy to write code that deadlocks racily in these situations depending on how fast the command reads its input, or in which order it writes its output. Let's give callers an easy interface for doing this the right way, similar to what capture_command() did for the simple case. The whole thing is backed by a generic poll() loop that can feed an arbitrary number of buffers to descriptors, and fill an arbitrary number of strbufs from other descriptors. This seems like overkill, but the resulting code is actually a bit cleaner than just handling the three descriptors (because the output code for stdout/stderr is effectively duplicated, so being able to loop is a benefit). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-17Merge branch 'nd/error-errno'Libravatar Junio C Hamano1-8/+7
The code for warning_errno/die_errno has been refactored and a new error_errno() reporting helper is introduced. * nd/error-errno: (41 commits) wrapper.c: use warning_errno() vcs-svn: use error_errno() upload-pack.c: use error_errno() unpack-trees.c: use error_errno() transport-helper.c: use error_errno() sha1_file.c: use {error,die,warning}_errno() server-info.c: use error_errno() sequencer.c: use error_errno() run-command.c: use error_errno() rerere.c: use error_errno() and warning_errno() reachable.c: use error_errno() mailmap.c: use error_errno() ident.c: use warning_errno() http.c: use error_errno() and warning_errno() grep.c: use error_errno() gpg-interface.c: use error_errno() fast-import.c: use error_errno() entry.c: use error_errno() editor.c: use error_errno() diff-no-index.c: use error_errno() ...
2016-05-17Merge branch 'ab/hooks'Libravatar Junio C Hamano1-1/+4
A new configuration variable core.hooksPath allows customizing where the hook directory is. * ab/hooks: hooks: allow customizing where the hook directory is githooks.txt: minor improvements to the grammar & phrasing githooks.txt: amend dangerous advice about 'update' hook ACL githooks.txt: improve the intro section
2016-05-09run-command.c: use error_errno()Libravatar Nguyễn Thái Ngọc Duy1-8/+7
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-04hooks: allow customizing where the hook directory isLibravatar Ævar Arnfjörð Bjarmason1-1/+4
Change the hardcoded lookup for .git/hooks/* to optionally lookup in $(git config core.hooksPath)/* instead. This is essentially a more intrusive version of the git-init ability to specify hooks on init time via init templates. The difference between that facility and this feature is that this can be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to apply for all your personal repositories, or all repositories on the system. I plan on using this on a centralized Git server where users can create arbitrary repositories under /gitroot, but I'd like to manage all the hooks that should be run centrally via a unified dispatch mechanism. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-29Merge branch 'jk/push-client-deadlock-fix'Libravatar Junio C Hamano1-0/+10
"git push" from a corrupt repository that attempts to push a large number of refs deadlocked; the thread to relay rejection notices for these ref updates blocked on writing them to the main thread, after the main thread at the receiving end notices that the push failed and decides not to read these notices and return a failure. * jk/push-client-deadlock-fix: t5504: drop sigpipe=ok from push tests fetch-pack: isolate sigpipe in demuxer thread send-pack: isolate sigpipe in demuxer thread run-command: teach async threads to ignore SIGPIPE send-pack: close demux pipe before finishing async process
2016-04-20run-command: teach async threads to ignore SIGPIPELibravatar Jeff King1-0/+10
Async processes can be implemented as separate forked processes, or as threads (depending on the NO_PTHREADS setting). In the latter case, if an async thread gets SIGPIPE, it takes down the whole process. This is obviously bad if the main process was not otherwise going to die, but even if we were going to die, it means the main process does not have a chance to report a useful error message. There's also the small matter that forked async processes will not take the main process down on a signal, meaning git will behave differently depending on the NO_PTHREADS setting. This patch fixes it by adding a new flag to "struct async" to block SIGPIPE just in the async thread. In theory, this should always be on (which makes async threads behave more like async processes), but we would first want to make sure that each async process we spawn is careful about checking return codes from write() and would not spew endlessly into a dead pipe. So let's start with it as optional, and we can enable it for specific sites in future patches. The natural name for this option would be "ignore_sigpipe", since that's what it does for the threaded case. But since that name might imply that we are ignoring it in all cases (including the separate-process one), let's call it "isolate_sigpipe". What we are really asking for is isolation. I.e., not to have our main process taken down by signals spawned by the async process. How that is implemented is up to the run-command code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-06Merge branch 'sb/submodule-parallel-update'Libravatar Junio C Hamano1-6/+6
A major part of "git submodule update" has been ported to C to take advantage of the recently added framework to run download tasks in parallel. * sb/submodule-parallel-update: clone: allow an explicit argument for parallel submodule clones submodule update: expose parallelism to the user submodule helper: remove double 'fatal: ' prefix git submodule update: have a dedicated helper for cloning run_processes_parallel: rename parameters for the callbacks run_processes_parallel: treat output of children as byte array submodule update: direct error message to stderr fetching submodules: respect `submodule.fetchJobs` config option submodule-config: drop check against NULL submodule-config: keep update strategy around
2016-03-10Merge branch 'jk/tighten-alloc' into maintLibravatar Junio C Hamano1-35/+25
* jk/tighten-alloc: (23 commits) compat/mingw: brown paper bag fix for 50a6c8e ewah: convert to REALLOC_ARRAY, etc convert ewah/bitmap code to use xmalloc diff_populate_gitlink: use a strbuf transport_anonymize_url: use xstrfmt git-compat-util: drop mempcpy compat code sequencer: simplify memory allocation of get_message test-path-utils: fix normalize_path_copy output buffer size fetch-pack: simplify add_sought_entry fast-import: simplify allocation in start_packfile write_untracked_extension: use FLEX_ALLOC helper prepare_{git,shell}_cmd: use argv_array use st_add and st_mult for allocation size computation convert trivial cases to FLEX_ARRAY macros use xmallocz to avoid size arithmetic convert trivial cases to ALLOC_ARRAY convert manual allocations to argv_array argv-array: add detach function add helpers for allocating flex-array structs harden REALLOC_ARRAY and xcalloc against size_t overflow ...
2016-03-04Merge branch 'sb/submodule-parallel-fetch'Libravatar Junio C Hamano1-21/+3
Simplify the two callback functions that are triggered when the child process terminates to avoid misuse of the child-process structure that has already been cleaned up. * sb/submodule-parallel-fetch: run-command: do not pass child process data into callbacks
2016-03-01run_processes_parallel: rename parameters for the callbacksLibravatar Stefan Beller1-2/+2
The refs code has a similar pattern of passing around 'struct strbuf *err', which is strictly used for error reporting. This is not the case here, as the strbuf is used to accumulate all the output (whether it is error or not) for the user. Rename it to 'out'. Suggested-by: Jonathan Nieder <jrnieder@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-01run_processes_parallel: treat output of children as byte arrayLibravatar Stefan Beller1-4/+4
We do not want the output to be interrupted by a NUL byte, so we cannot use raw fputs. Introduce strbuf_write to avoid having long arguments in run-command.c. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-01run-command: do not pass child process data into callbacksLibravatar Stefan Beller1-21/+3
The expected way to pass data into the callback is to pass them via the customizable callback pointer. The error reporting in default_{start_failure, task_finished} is not user friendly enough, that we want to encourage using the child data for such purposes. Furthermore the struct child data is cleaned by the run-command API, before we access them in the callbacks, leading to use-after-free situations. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-26Merge branch 'jk/epipe-in-async'Libravatar Junio C Hamano1-0/+10
Handling of errors while writing into our internal asynchronous process has been made more robust, which reduces flakiness in our tests. * jk/epipe-in-async: t5504: handle expected output from SIGPIPE death test_must_fail: report number of unexpected signal fetch-pack: ignore SIGPIPE in sideband demuxer write_or_die: handle EPIPE in async threads
2016-02-26Merge branch 'jk/tighten-alloc'Libravatar Junio C Hamano1-35/+25
Update various codepaths to avoid manually-counted malloc(). * jk/tighten-alloc: (22 commits) ewah: convert to REALLOC_ARRAY, etc convert ewah/bitmap code to use xmalloc diff_populate_gitlink: use a strbuf transport_anonymize_url: use xstrfmt git-compat-util: drop mempcpy compat code sequencer: simplify memory allocation of get_message test-path-utils: fix normalize_path_copy output buffer size fetch-pack: simplify add_sought_entry fast-import: simplify allocation in start_packfile write_untracked_extension: use FLEX_ALLOC helper prepare_{git,shell}_cmd: use argv_array use st_add and st_mult for allocation size computation convert trivial cases to FLEX_ARRAY macros use xmallocz to avoid size arithmetic convert trivial cases to ALLOC_ARRAY convert manual allocations to argv_array argv-array: add detach function add helpers for allocating flex-array structs harden REALLOC_ARRAY and xcalloc against size_t overflow tree-diff: catch integer overflow in combine_diff_path allocation ...
2016-02-25write_or_die: handle EPIPE in async threadsLibravatar Jeff King1-0/+10
When write_or_die() sees EPIPE, it treats it specially by converting it into a SIGPIPE death. We obviously cannot ignore it, as the write has failed and the caller expects us to die. But likewise, we cannot just call die(), because printing any message at all would be a nuisance during normal operations. However, this is a problem if write_or_die() is called from a thread. Our raised signal ends up killing the whole process, when logically we just need to kill the thread (after all, if we are ignoring SIGPIPE, there is good reason to think that the main thread is expecting to handle it). Inside an async thread, the die() code already does the right thing, because we use our custom die_async() routine, which calls pthread_join(). So ideally we would piggy-back on that, and simply call: die_quietly_with_code(141); or similar. But refactoring the die code to do this is surprisingly non-trivial. The die_routines themselves handle both printing and the decision of the exit code. Every one of them would have to be modified to take new parameters for the code, and to tell us to be quiet. Instead, we can just teach write_or_die() to check for the async case and handle it specially. We do have to build an interface to abstract the async exit, but it's simple and self-contained. If we had many call-sites that wanted to do this die_quietly_with_code(), this approach wouldn't scale as well, but we don't. This is the only place where do this weird exit trick. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22prepare_{git,shell}_cmd: use argv_arrayLibravatar Jeff King1-35/+25
These functions transform an existing argv into one suitable for exec-ing or spawning via git or a shell. We can use an argv_array in each to avoid dealing with manual counting and allocation. This also makes the memory allocation more clear and fixes some leaks. In prepare_shell_cmd, we would sometimes allocate a new string with "$@" in it and sometimes not, meaning the caller could not correctly free it. On the non-Windows side, we are in a child process which will exec() or exit() immediately, so the leak isn't a big deal. On Windows, though, we use spawn() from the parent process, and leak a string for each shell command we run. On top of that, the Windows code did not free the allocated argv array at all (but does for the prepare_git_cmd case!). By switching both of these functions to write into an argv_array, we can consistently free the result as appropriate. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-20Merge branch 'nd/clear-gitenv-upon-use-of-alias'Libravatar Junio C Hamano1-1/+1
d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR, 2015-06-26) attempted to work around a glitch in alias handling by overwriting GIT_WORK_TREE environment variable to affect subprocesses when set_git_work_tree() gets called, which resulted in a rather unpleasant regression to "clone" and "init". Try to address the same issue by always restoring the environment and respawning the real underlying command when handling alias. * nd/clear-gitenv-upon-use-of-alias: run-command: don't warn on SIGPIPE deaths git.c: make sure we do not leak GIT_* to alias scripts setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when .. git.c: make it clear save_env() is for alias handling only
2015-12-29run-command: don't warn on SIGPIPE deathsLibravatar Jeff King1-1/+1
When git executes a sub-command, we print a warning if the command dies due to a signal, but make an exception for "uninteresting" cases like SIGINT and SIGQUIT (since the user presumably just hit ^C). We should make a similar exception for SIGPIPE, because it's an expected and uninteresting return in most cases; it generally means the user quit the pager before git had finished generating all output. This used to be very hard to trigger in practice, because: 1. We only complain if we see a real SIGPIPE death, not the shell-induced 141 exit code. This means that anything we run via the shell does not trigger the warning, which includes most non-trivial aliases. 2. The common case for SIGPIPE is the user quitting the pager before git has finished generating all output. But if the user triggers a pager with "-p", we redirect the git wrapper's stderr to that pager, too. Since the pager is dead, it means that the message goes nowhere. 3. You can see it if you run your own pager, like "git foo | head". But that only happens if "foo" is a non-builtin (so it doesn't work with "log", for example). However, it may become more common after 86d26f2, which teaches alias to re-exec builtins rather than running them in the same process. This case doesn't trigger (1), as we don't need a shell to run a git command. It doesn't trigger (2), because the pager is not started by the original git, but by the inner re-exec of git. And it doesn't trigger (3), because builtins are treated more like non-builtins in this case. Given how flaky this message already is (e.g., you cannot even know whether you will see it, as git optimizes out some shell invocations behind the scenes based on the contents of the command!), and that it is unlikely to ever provide useful information, let's suppress it for all cases of SIGPIPE. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-16run-command: add an asynchronous parallel child processorLibravatar Stefan Beller1-0/+335
This allows to run external commands in parallel with ordered output on stderr. If we run external commands in parallel we cannot pipe the output directly to the our stdout/err as it would mix up. So each process's output will flow through a pipe, which we buffer. One subprocess can be directly piped to out stdout/err for a low latency feedback to the user. Example: Let's assume we have 5 submodules A,B,C,D,E and each fetch takes a different amount of time as the different submodules vary in size, then the output of fetches in sequential order might look like this: time --> output: |---A---| |-B-| |-------C-------| |-D-| |-E-| When we schedule these submodules into maximal two parallel processes, a schedule and sample output over time may look like this: process 1: |---A---| |-D-| |-E-| process 2: |-B-| |-------C-------| output: |---A---|B|---C-------|DE So A will be perceived as it would run normally in the single child version. As B has finished by the time A is done, we can dump its whole progress buffer on stderr, such that it looks like it finished in no time. Once that is done, C is determined to be the visible child and its progress will be reported in real time. So this way of output is really good for human consumption, as it only changes the timing, not the actual output. For machine consumption the output needs to be prepared in the tasks, by either having a prefix per line or per block to indicate whose tasks output is displayed, because the output order may not follow the original sequential ordering: |----A----| |--B--| |-C-| will be scheduled to be all parallel: process 1: |----A----| process 2: |--B--| process 3: |-C-| output: |----A----|CB This happens because C finished before B did, so it will be queued for output before B. To detect when a child has finished executing, we check interleaved with other actions (such as checking the liveliness of children or starting new processes) whether the stderr pipe still exists. Once a child closed its stderr stream, we assume it is terminating very soon, and use `finish_command()` from the single external process execution interface to collect the exit status. By maintaining the strong assumption of stderr being open until the very end of a child process, we can avoid other hassle such as an implementation using `waitpid(-1)`, which is not implemented in Windows. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-03Merge branch 'rs/daemon-plug-child-leak'Libravatar Junio C Hamano1-6/+9
"git daemon" uses "run_command()" without "finish_command()", so it needs to release resources itself, which it forgot to do. * rs/daemon-plug-child-leak: daemon: plug memory leak run-command: factor out child_process_clear()
2015-11-02run-command: factor out child_process_clear()Libravatar René Scharfe1-6/+9
Avoid duplication by moving the code to release allocated memory for arguments and environment to its own function, child_process_clear(). Export it to provide a counterpart to child_process_init(). Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-07Merge branch 'ti/glibc-stdio-mutex-from-signal-handler'Libravatar Junio C Hamano1-8/+17
Allocation related functions and stdio are unsafe things to call inside a signal handler, and indeed killing the pager can cause glibc to deadlock waiting on allocation mutex as our signal handler tries to free() some data structures in wait_for_pager(). Reduce these unsafe calls. * ti/glibc-stdio-mutex-from-signal-handler: pager: don't use unsafe functions in signal handlers
2015-10-05Merge branch 'jk/async-pkt-line'Libravatar Junio C Hamano1-1/+15
The debugging infrastructure for pkt-line based communication has been improved to mark the side-band communication specifically. * jk/async-pkt-line: pkt-line: show packets in async processes as "sideband" run-command: provide in_async query function
2015-09-04pager: don't use unsafe functions in signal handlersLibravatar Takashi Iwai1-8/+17
Since the commit a3da8821208d (pager: do wait_for_pager on signal death), we call wait_for_pager() in the pager's signal handler. The recent bug report revealed that this causes a deadlock in glibc at aborting "git log" [*1*]. When this happens, git process is left unterminated, and it can't be killed by SIGTERM but only by SIGKILL. The problem is that wait_for_pager() function does more than waiting for pager process's termination, but it does cleanups and printing errors. Unfortunately, the functions that may be used in a signal handler are very limited [*2*]. Particularly, malloc(), free() and the variants can't be used in a signal handler because they take a mutex internally in glibc. This was the cause of the deadlock above. Other than the direct calls of malloc/free, many functions calling malloc/free can't be used. strerror() is such one, either. Also the usage of fflush() and printf() in a signal handler is bad, although it seems working so far. In a safer side, we should avoid them, too. This patch tries to reduce the calls of such functions in signal handlers. wait_for_signal() takes a flag and avoids the unsafe calls. Also, finish_command_in_signal() is introduced for the same reason. There the free() calls are removed, and only waits for the children without whining at errors. [*1*] https://bugzilla.opensuse.org/show_bug.cgi?id=942297 [*2*] http://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html#tag_15_04_03 Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-01run-command: provide in_async query functionLibravatar Jeff King1-1/+15
It's not easy for arbitrary code to find out whether it is running in an async process or not. A top-level function which is fed to start_async() can know (you just pass down an argument saying "you are async"). But that function may call other global functions, and we would not want to have to pass the information all the way through the call stack. Nor can we simply set a global variable, as those may be shared between async threads and the main thread (if the platform supports pthreads). We need pthread tricks _or_ a global variable, depending on how start_async is implemented. The callers don't have enough information to do this right, so let's provide a simple query function that does. Fortunately we can reuse the existing infrastructure to make the pthread case simple (and even simplify die_async() by using our new function). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-25Merge branch 'jk/long-error-messages'Libravatar Junio C Hamano1-15/+2
The codepath to produce error messages had a hard-coded limit to the size of the message, primarily to avoid memory allocation while calling die(). * jk/long-error-messages: vreportf: avoid intermediate buffer vreportf: report to arbitrary filehandles
2015-08-11vreportf: report to arbitrary filehandlesLibravatar Jeff King1-15/+2
The vreportf function always goes to stderr, but run-command wants child errors to go to the parent's original stderr. To solve this, commit a5487dd duplicates the stderr fd and installs die and error handlers to direct the output appropriately (which later turned into the vwritef function). This has two downsides, though: - we make multiple calls to write(), which contradicts the "write at once" logic from d048a96 (print warning/error/fatal messages in one shot, 2007-11-09). - the custom handlers basically duplicate the normal handlers. They're only a few lines of code, but we should not have to repeat the magic "exit(128)", for example. We can solve the first by using fdopen() on the duplicated descriptor. We can't pass this to vreportf, but we could introduce a new vreportf_to to handle it. However, to fix the second problem, we instead introduce a new "set_error_handle" function, which lets the normal vreportf calls output to a handle besides stderr. Thus we can get rid of our custom handlers entirely, and just ask the regular handlers to output to our new descriptor. And as vwritef has no more callers, it can just go away. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10find_hook: keep our own static bufferLibravatar Jeff King1-4/+6
The find_hook function returns the results of git_path, which is a static buffer shared by other path-related calls. Returning such a buffer is slightly dangerous, because it can be overwritten by seemingly unrelated functions. Let's at least keep our _own_ static buffer, so you can only get in trouble by calling find_hook in quick succession, which is less likely to happen and more obvious to notice. While we're at it, let's add some documentation of the function's limitations. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-11Merge branch 'nd/multiple-work-trees'Libravatar Junio C Hamano1-2/+2
A replacement for contrib/workdir/git-new-workdir that does not rely on symbolic links and make sharing of objects and refs safer by making the borrowee and borrowers aware of each other. * nd/multiple-work-trees: (41 commits) prune --worktrees: fix expire vs worktree existence condition t1501: fix test with split index t2026: fix broken &&-chain t2026 needs procondition SANITY git-checkout.txt: a note about multiple checkout support for submodules checkout: add --ignore-other-wortrees checkout: pass whole struct to parse_branchname_arg instead of individual flags git-common-dir: make "modules/" per-working-directory directory checkout: do not fail if target is an empty directory t2025: add a test to make sure grafts is working from a linked checkout checkout: don't require a work tree when checking out into a new one git_path(): keep "info/sparse-checkout" per work-tree count-objects: report unused files in $GIT_DIR/worktrees/... gc: support prune --worktrees gc: factor out gc.pruneexpire parsing code gc: style change -- no SP before closing parenthesis checkout: clean up half-prepared directories in --to mode checkout: reject if the branch is already checked out elsewhere prune: strategies for linked checkouts checkout: support checking out into a new working directory ...
2015-03-25Merge branch 'jk/run-command-capture'Libravatar Junio C Hamano1-1/+22
The run-command interface was easy to abuse and make a pipe for us to read from the process, wait for the process to finish and then attempt to read its output, which is a pattern that lead to a deadlock. Fix such uses by introducing a helper to do this correctly (i.e. we need to read first and then wait the process to finish) and also add code to prevent such abuse in the run-command helper. * jk/run-command-capture: run-command: forbid using run_command with piped output trailer: use capture_command submodule: use capture_command wt-status: use capture_command run-command: introduce capture_command helper wt_status: fix signedness mismatch in strbuf_read call wt-status: don't flush before running "submodule status"
2015-03-22run-command: forbid using run_command with piped outputLibravatar Jeff King1-1/+6
Because run_command both spawns and wait()s for the command before returning control to the caller, any reads from the pipes we open must necessarily happen after wait() returns. This can lead to deadlock, as the child process may block on writing to us while we are blocked waiting for it to exit. Worse, it only happens when the child fills the pipe buffer, which means that the problem may come and go depending on the platform and the size of the output produced by the child. Let's detect and flag this dangerous construct so that we can catch potential bugs early in the test suite rather than having them happen in the field. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-22run-command: introduce capture_command helperLibravatar Jeff King1-0/+16
Something as simple as reading the stdout from a command turns out to be rather hard to do right. Doing: cmd.out = -1; run_command(&cmd); strbuf_read(&buf, cmd.out, 0); can result in deadlock if the child process produces a large amount of output. What happens is: 1. The parent spawns the child with its stdout connected to a pipe, of which the parent is the sole reader. 2. The parent calls wait(), blocking until the child exits. 3. The child writes to stdout. If it writes more data than the OS pipe buffer can hold, the write() call will block. This is a deadlock; the parent is waiting for the child to exit, and the child is waiting for the parent to call read(). So we might try instead: start_command(&cmd); strbuf_read(&buf, cmd.out, 0); finish_command(&cmd); But that is not quite right either. We are examining cmd.out and running finish_command whether start_command succeeded or not, which is wrong. Moreover, these snippets do not do any error handling. If our read() fails, we must make sure to still call finish_command (to reap the child process). And both snippets failed to close the cmd.out descriptor, which they must do (provided start_command succeeded). Let's introduce a run-command helper that can make this a bit simpler for callers to get right. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-10git-compat-util.h: move SHELL_PATH default into headerLibravatar Kyle J. McKay1-4/+0
If SHELL_PATH is not defined we use "/bin/sh". However, run-command.c is not the only file that needs to use the default value so move it into a common header. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-22Merge branch 'jc/hook-cleanup'Libravatar Junio C Hamano1-17/+0
Remove unused code. * jc/hook-cleanup: run-command.c: retire unused run_hook_with_custom_index()
2014-12-01path.c: make get_pathname() call sites return const char *Libravatar Nguyễn Thái Ngọc Duy1-2/+2
Before the previous commit, get_pathname returns an array of PATH_MAX length. Even if git_path() and similar functions does not use the whole array, git_path() caller can, in theory. After the commit, get_pathname() may return a buffer that has just enough room for the returned string and git_path() caller should never write beyond that. Make git_path(), mkpath() and git_path_submodule() return a const buffer to make sure callers do not write in it at all. This could have been part of the previous commit, but the "const" conversion is too much distraction from the core changes in path.c. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-01run-command.c: retire unused run_hook_with_custom_index()Libravatar Junio C Hamano1-17/+0
This was originally meant to be used to rewrite run_commit_hook() that only special cases the GIT_INDEX_FILE environment, but the run_hook_ve() refactoring done earlier made the implementation of run_commit_hook() thin and clean enough. Nobody uses this, so retire it as an unfinished clean-up made unnecessary. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-10run-command: use void to declare that functions take no parametersLibravatar René Scharfe1-2/+2
Explicitly declare that git_atexit_dispatch() and git_atexit_clear() take no parameters instead of leaving their parameter list empty and thus unspecified. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-24Merge branch 'eb/no-pthreads'Libravatar Junio C Hamano1-0/+40
Allow us build with NO_PTHREADS=NoThanks compilation option. * eb/no-pthreads: Handle atexit list internaly for unthreaded builds pack-objects: set number of threads before checking and warning index-pack: fix compilation with NO_PTHREADS
2014-10-19Handle atexit list internaly for unthreaded buildsLibravatar Etienne Buira1-0/+40
Wrap atexit()s calls on unthreaded builds to handle callback list internally. This is needed because on unthreaded builds, asyncs inherits parent's atexit() list, that gets run as soon as the async exit()s (and again at the end of async's parent process). That led to remove temporary files too early. Also remove a by-atexit-callback guard against this kind of issue in clone.c, as this patch makes it redundant. Fixes test 5537 (temporary shallow file vanished before unpack-objects could open it) BTW remove an unused variable in shallow.c. Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Andreas Schwab <schwab@linux-m68k.org> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Etienne Buira <etienne.buira@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-19run-command: add env_array, an optional argv_array for envLibravatar René Scharfe1-0/+6
Similar to args, add a struct argv_array member to struct child_process that simplifies specifying the environment for children. It is freed automatically by finish_command() or if start_command() encounters an error. Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20run-command: inline prepare_run_command_v_opt()Libravatar René Scharfe1-16/+8
Merge prepare_run_command_v_opt() and its only caller. This removes a pointer indirection and allows to initialize the struct child_process using CHILD_PROCESS_INIT. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20run-command: call run_command_v_opt_cd_env() instead of duplicating itLibravatar René Scharfe1-3/+1
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>