| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When performing edge-based operations on the revision graph, it can be
useful to be able to identify the INTERESTING graph's connection(s) to
the bottom commit(s) specified by the user.
Conceptually when the user specifies "A..B" (== B ^A), they are asking
for the history from A to B. The first connection from A onto the
INTERESTING graph is part of that history, and should be considered. If
we consider only INTERESTING nodes and their connections, then we're
really only considering the history from A's immediate descendants to B.
This patch does not change behaviour, but adds a new BOTTOM flag to
indicate the bottom commits specified by the user, ready to be used by
following patches.
We immediately use the BOTTOM flag to return collect_bottom_commits() to
its original approach of examining the pending commit list rather than
the command line. This will ensure alignment of the definition of
"bottom" with future patches.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
History simplification previously always treated merges as TREESAME
if they were TREESAME to any parent.
While this was consistent with the default behaviour, this could be
extremely unhelpful when searching detailed history, and could not be
overridden. For example, if a merge had ignored a change, as if by "-s
ours", then:
git log -m -p --full-history -Schange file
would successfully locate "change"'s addition but would not locate the
merge that resolved against it.
Futher, simplify_merges could drop the actual parent that a commit
was TREESAME to, leaving it as a normal commit marked TREESAME that
isn't actually TREESAME to its remaining parent.
Now redefine a commit's TREESAME flag to be true only if a commit is
TREESAME to _all_ of its parents. This doesn't affect either the default
simplify_history behaviour (because partially TREESAME merges are turned
into normal commits), or full-history with parent rewriting (because all
merges are output). But it does affect other modes. The clearest
difference is that --full-history will show more merges - sufficient to
ensure that -m -p --full-history log searches can really explain every
change to the file, including those changes' ultimate fate in merges.
Also modify simplify_merges to recalculate TREESAME after removing
a parent. This is achieved by storing per-parent TREESAME flags on the
initial scan, so the combined flag can be easily recomputed.
This fixes some t6111 failures, but creates a couple of new ones -
we are now showing some merges that don't need to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation assures users that "A...B" is defined as "A B --not
$(git merge-base --all A B)". This wasn't in fact quite true, because
the calculated merge bases were not sent to add_rev_cmdline().
The main effect of this was that although
git rev-list --ancestry-path A B --not $(git merge-base --all A B)
worked, the simpler form
git rev-list --ancestry-path A...B
failed with a "no bottom commits" error.
Other potential users of bottom commits could also be affected by this
problem, if they examine revs->cmdline_info; I came across the issue in
my proposed history traversal refinements series.
So ensure that the calculated merge bases are sent to add_rev_cmdline(),
flagged with new 'whence' enum value REV_CMD_MERGE_BASE.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consolidate codepaths that inspect log-message-to-be and decide to
add a new Signed-off-by line in various commands.
* bc/append-signed-off-by:
git-commit: populate the edit buffer with 2 blank lines before s-o-b
Unify appending signoff in format-patch, commit and sequencer
format-patch: update append_signoff prototype
t4014: more tests about appending s-o-b lines
sequencer.c: teach append_signoff to avoid adding a duplicate newline
sequencer.c: teach append_signoff how to detect duplicate s-o-b
sequencer.c: always separate "(cherry picked from" from commit body
sequencer.c: require a conforming footer to be preceded by a blank line
sequencer.c: recognize "(cherry picked from ..." as part of s-o-b footer
t/t3511: add some tests of 'cherry-pick -s' functionality
t/test-lib-functions.sh: allow to specify the tag name to test_commit
commit, cherry-pick -s: remove broken support for multiline rfc2822 fields
sequencer.c: rework search for start of footer to improve clarity
|
|
This is a preparation step for merging with append_signoff from
sequencer.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
|
|
Teach "format-patch" to prefix v4- to its output files for the
fourth iteration of a patch series, to make it easier for the
submitter to keep separate copies for iterations.
* jc/format-patch-reroll:
format-patch: give --reroll-count a short synonym -v
format-patch: document and test --reroll-count
format-patch: add --reroll-count=$N option
get_patch_filename(): split into two functions
get_patch_filename(): drop "just-numbers" hack
get_patch_filename(): simplify function signature
builtin/log.c: stop using global patch_suffix
builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter()
builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
|
|
Pass a mailmap from rev_info to pretty_print_context to so that the
pretty printer can use rewritten name and email address when showing
commits.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --reroll-count=$N option, when given a positive integer:
- Adds " v$N" to the subject prefix specified. As the default
subject prefix string is "PATCH", --reroll-count=2 makes it
"PATCH v2".
- Prefixes "v$N-" to the names used for output files. The cover
letter, whose name is usually 0000-cover-letter.patch, becomes
v2-0000-cover-letter.patch when given --reroll-count=2.
This allows users to use the same --output-directory for multiple
iterations of the same series, without letting the output for a
newer round overwrite output files from the earlier rounds. The
user can incorporate materials from earlier rounds to update the
newly minted iteration, and use "send-email v2-*.patch" to send out
the patches belonging to the second iteration easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When inserting the note after the commit log message to format-patch
output, add three dashes before the note. Record the fact that we
did so in the rev_info and omit showing duplicated three dashes in
the usual codepath that is used when notes are not being shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
|
|
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
|
|
Add a field to setup_revision_opt structure and allow these callers
to tell the setup_revisions command parsing machinery that short SHA1
it encounters are meant to name committish.
This step does not go all the way to connect the setup_revisions()
to sha1_name.c yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "cant_be_filename" that tells the function that the
caller knows the arg is not a path (hence it does not have to be
checked for absense of the file whose name matches it) is made into
a bit in the flag word.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line parser choked "git cherry-pick $name" when $name can be
both revision name and a pathname, even though $name can never be a path
in the context of the command.
The issue the patch addresses is real, but the way it is implemented felt
unnecessarily invasive a bit. It may be cleaner for this caller to add
the "--" to the end of the argv_array it passes to setup_revisions().
By Clemens Buchacher
* cb/cherry-pick-rev-path-confusion:
cherry-pick: do not expect file arguments
|
|
If a commit-ish passed to cherry-pick or revert happens to have a file
of the same name, git complains that the argument is ambiguous and
advises to use '--'. To make things worse, the '--' argument is removed
by parse_options, und so passing '--' has no effect.
Instead, always interpret cherry-pick/revert arguments as revisions.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches the "log" family of commands to pass the GPG signature in the
commit objects to "gpg --verify" via the verify_signed_buffer() interface
used to verify signed tag objects. E.g.
$ git show --show-signature -s HEAD
shows GPG output in the header part of the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/pending:
commit: factor out clear_commit_marks_for_object_array
checkout: use leak_pending flag
bundle: use leak_pending flag
bisect: use leak_pending flag
revision: add leak_pending flag
checkout: use add_pending_{object,sha1} in orphan check
revision: factor out add_pending_sha1
checkout: check for "Previous HEAD" notice in t2020
Conflicts:
builtin/checkout.c
revision.c
|
|
* jc/fetch-verify:
fetch: verify we have everything we need before updating our ref
rev-list --verify-object
list-objects: pass callback data to show_objects()
|
|
* jc/traverse-commit-list:
revision.c: update show_object_with_name() without using malloc()
revision.c: add show_object_with_name() helper function
rev-list: fix finish_object() call
|
|
* bk/ancestry-path:
t6019: avoid refname collision on case-insensitive systems
revision: do not include sibling history in --ancestry-path output
revision: keep track of the end-user input from the command line
rev-list: Demonstrate breakage with --ancestry-path --all
|
|
The new flag leak_pending in struct rev_info can be used to prevent
prepare_revision_walk from freeing the list of pending objects. It
will still forget about them, so it really is leaked. This behaviour
may look weird at first, but it can be useful if the pointer to the
list is saved before calling prepare_revision_walk.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is a combination of the static get_reference and
add_pending_object. It can be used to easily queue objects by hash.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Often we want to verify everything reachable from a given set of commits
are present in our repository and connected without a gap to the tips of
our refs. We used to do this for this purpose:
$ rev-list --objects $commits_to_be_tested --not --all
Even though this is good enough for catching missing commits and trees,
we show the object name but do not verify their existence, let alone their
well-formedness, for the blob objects at the leaf level.
Add a new "--verify-object" option so that we can catch missing and broken
blobs as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given a complex set of revision specifiers on the command line, it is too
late to look at the flags of the objects in the initial traversal list at
the beginning of limit_list() in order to determine what the objects the
end-user explicitly listed on the command line were. The process to move
objects from the pending array to the traversal list may have marked
objects that are not mentioned as UNINTERESTING, when handle_commit()
marked the parents of UNINTERESTING commits mentioned on the command line
by calling mark_parents_uninteresting().
This made "rev-list --ancestry-path ^A ..." to mistakenly list commits
that are descendants of A's parents but that are not descendants of A
itself, as ^A from the command line causes A and its parents marked as
UNINTERESTING before coming to limit_list(), and we try to enumerate the
commits that are descendants of these commits that are UNINTERESTING
before we start walking the history.
It actually is too late even if we inspected the pending object array
before calling prepare_revision_walk(), as some of the same objects might
have been mentioned twice, once as positive and another time as negative.
The "rev-list --some-option A --not --all" command may want to notice,
even if the resulting set is empty, that the user showed some interest in
"A" and do something special about it.
Prepare a separate array to keep track of what syntactic element was used
to cause each object to appear in the pending array from the command line,
and populate it as setup_revisions() parses the command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two copies of traverse_commit_list callback that show the object
name followed by pathname the object was found, to produce output similar
to "rev-list --objects".
Unify them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
|
|
* jc/notes-batch-removal:
show: --ignore-missing
notes remove: --stdin reads from the standard input
notes remove: --ignore-missing
notes remove: allow removing more than one
|
|
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of barfing, simply ignore bad object names seen in the
input. This is useful when reading from "git notes list" output
that may refer to objects that have already been garbage collected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --count is used with --cherry-mark, omit the patch equivalent
commits from the count for left and right commits and print the count of
equivalent commits separately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
|
|
Introduce --min-parents and --max-parents options which limit the
revisions to those commits which have at least (or at most) that many
commits, where negative arguments for --max-parents= denote infinity
(i.e. no upper limit).
In particular:
--max-parents=1 is the same as --no-merges;
--min-parents=2 is the same as --merges;
--max-parents=0 shows only roots; and
--min-parents=3 shows only octopus merges
Using --min-parents=n and --max-parents=m with n>m gives you what you ask
for (i.e. nothing) for obvious reasons, just like when you give --merges
(show only merge commits) and --no-merges (show only non-merge commits) at
the same time.
Also, introduce --no-min-parents and --no-max-parents to do the obvious
thing for convenience.
We compute the number of parents only when we limit by that, so there
is no performance impact when there are no limiters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
|
|
Currently, commit marks (left, right, boundary, cherry) are output right
before the commit sha1, which makes it difficult to copy sha1s. Sample
output for "git log --oneline --cherry":
=049c269 t6007: test rev-list --cherry
Change this to
= 049c269 t6007: test rev-list --cherry
which matches exactly the current output of "git log --graph".
Leave "git rev-list" output as is (no space) so that they do not break.
Adjust "git-svn" which uses "git log --pretty=raw --boundary".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
for marking those commits which "--cherry-pick" would drop.
The marker for those commits is '=' because '-' denotes a boundary
commit already, even though 'git cherry' uses it.
Nonequivalent commits are denoted '+' unless '--left-right' is used.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "--cherry-pick" does not work with unsymmetric ranges
(A..B) for obvious reasons.
Introduce "--left-only" and "--right-only" which limit the output to
commits on the respective sides of a symmetric range (i.e. only "<"
resp. ">" commits as per "--left-right").
This is especially useful for things like
git log --cherry-pick --right-only @{u}...
which is much more flexible (and descriptive) than
git cherry @{u} | sed -ne 's/^+ //p'
and potentially more useful than
git log --cherry-pick @{u}...
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By passing the path to a submodule in opt->submodule, the function can
be used to walk history in the named submodule repository, instead of
the toplevel repository.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/rev-list-count:
bash completion: Support "divergence from upstream" messages in __git_ps1
rev-list: introduce --count option
Conflicts:
contrib/completion/git-completion.bash
|
|
Add a --count option that, instead of actually listing the commits,
merely counts them.
This is mostly geared towards script use, and to this end it acts
specially when used with --left-right: it outputs the left and right
counts separately. Previously, scripts would have to run a shell loop
or small inline script over to achieve the same. (Without
--left-right, a simple |wc -l does the job.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"rev-list A..H" computes the set of commits that are ancestors of H, but
excludes the ones that are ancestors of A. This is useful to see what
happened to the history leading to H since A, in the sense that "what does
H have that did not exist in A" (e.g. when you have a choice to update to
H from A).
x---x---A---B---C <-- topic
/ \
x---x---x---o---o---o---o---M---D---E---F---G <-- dev
/ \
x---o---o---o---o---o---o---o---o---o---o---o---N---H <-- master
The result in the above example would be the commits marked with caps
letters (except for A itself, of course), and the ones marked with 'o'.
When you want to find out what commits in H are contaminated with the bug
introduced by A and need fixing, however, you might want to view only the
subset of "A..B" that are actually descendants of A, i.e. excluding the
ones marked with 'o'. Introduce a new option --ancestry-path to compute
this set with "rev-list --ancestry-path A..B".
Note that in practice, you would build a fix immediately on top of A and
"git branch --contains A" will give the names of branches that you would
need to merge the fix into (i.e. topic, dev and master), so this may not
be worth paying the extra cost of postprocessing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
|
|
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but
asking for combined patch with "show -c" didn't turn the patch output
format on; the placement of this logic in setup_revisions() dates back to
cd2bdc5 (Common option parsing for "git log --diff" and friends,
2006-04-14).
This unfortunately cannot be done as a trivial change of "if dense
combined is asked, default to patch format" done in setup_revisions() to
"if any combined is asked, default to patch format", as "diff-tree -c"
needs to default to raw, while "diff-tree --cc" needs to default to patch,
and they share the codepath. These command specific defaults are now
handled in the new "tweak" callback that can be customized by individual
command implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far the last parameter to setup_revisions() was to specify the default
ref when the command line did not give any (typically "HEAD"). This changes
it to take a pointer to a structure so that we can add other information without
touching too many codepaths in later patches.
There is no functionality change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Kevin Bracey
Junio C Hamano
Nguyễn Thái Ngọc Duy
Antoine Pelisse
Martin von Zweigbergk
Clemens Buchacher
Heiko Voigt
René Scharfe
Jeff King
Jay Soffian
Michael J Gruber
Thomas Rast