summaryrefslogtreecommitdiff
path: root/revision.h
AgeCommit message (Collapse)AuthorFilesLines
2015-06-29convert "enum date_mode" into a structLibravatar Jeff King1-1/+1
In preparation for adding date modes that may carry extra information beyond the mode itself, this patch converts the date_mode enum into a struct. Most of the conversion is fairly straightforward; we pass the struct as a pointer and dereference the type field where necessary. Locations that declare a date_mode can use a "{}" constructor. However, the tricky case is where we use the enum labels as constants, like: show_date(t, tz, DATE_NORMAL); Ideally we could say: show_date(t, tz, &{ DATE_NORMAL }); but of course C does not allow that. Likewise, we cannot cast the constant to a struct, because we need to pass an actual address. Our options are basically: 1. Manually add a "struct date_mode d = { DATE_NORMAL }" definition to each caller, and pass "&d". This makes the callers uglier, because they sometimes do not even have their own scope (e.g., they are inside a switch statement). 2. Provide a pre-made global "date_normal" struct that can be passed by address. We'd also need "date_rfc2822", "date_iso8601", and so forth. But at least the ugliness is defined in one place. 3. Provide a wrapper that generates the correct struct on the fly. The big downside is that we end up pointing to a single global, which makes our wrapper non-reentrant. But show_date is already not reentrant, so it does not matter. This patch implements 3, along with a minor macro to keep the size of the callers sane. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-11Merge branch 'jc/unused-symbols'Libravatar Junio C Hamano1-8/+4
Mark file-local symbols as "static", and drop functions that nobody uses. * jc/unused-symbols: shallow.c: make check_shallow_file_for_update() static remote.c: make clear_cas_option() static urlmatch.c: make match_urls() static revision.c: make save_parents() and free_saved_parents() static line-log.c: make line_log_data_init() static pack-bitmap.c: make pack_bitmap_filename() static prompt.c: remove git_getpass() nobody uses http.c: make finish_active_slot() and handle_curl_result() static
2015-02-11Merge branch 'cj/log-invert-grep'Libravatar Junio C Hamano1-0/+2
"git log --invert-grep --grep=WIP" will show only commits that do not have the string "WIP" in their messages. * cj/log-invert-grep: log: teach --invert-grep option
2015-01-15revision.c: make save_parents() and free_saved_parents() staticLibravatar Junio C Hamano1-8/+4
No external callers exist. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-13log: teach --invert-grep optionLibravatar Christoph Junghans1-0/+2
"git log --grep=<string>" shows only commits with messages that match the given string, but sometimes it is useful to be able to show only commits that do *not* have certain messages (e.g. "show me ones that are not FIXUP commits"). Originally, we had the invert-grep flag in grep_opt, but because "git grep --invert-grep" does not make sense except in conjunction with "--files-with-matches", which is already covered by "--files-without-matches", it was moved it to revisions structure. To have the flag there expresses the function to the feature better. When the newly inserted two tests run, the history would have commits with messages "initial", "second", "third", "fourth", "fifth", "sixth" and "Second", committed in this order. The commits that does not match either "th" or "Sec" is "second" and "initial". For the case insensitive case only "initial" matches. Signed-off-by: Christoph Junghans <ottxor@gentoo.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-29rev-list: add an option to mark fewer edges as uninterestingLibravatar brian m. carlson1-0/+1
In commit fbd4a70 (list-objects: mark more commits as edges in mark_edges_uninteresting - 2013-08-16), we marked an increasing number of edges uninteresting. This change, and the subsequent change to make this conditional on --objects-edge, are used by --thin to make much smaller packs for shallow clones. Unfortunately, they cause a significant performance regression when pushing non-shallow clones with lots of refs (23.322 seconds vs. 4.785 seconds with 22400 refs). Add an option to git rev-list, --objects-edge-aggressive, that preserves this more aggressive behavior, while leaving --objects-edge to provide more performant behavior. Preserve the current behavior for the moment by using the aggressive option. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-19revision: remove definition of unused 'add_object' functionLibravatar Ramsay Jones1-5/+0
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-19rev-list: add --indexed-objects optionLibravatar Jeff King1-0/+1
There is currently no easy way to ask the revision traversal machinery to include objects reachable from the index (e.g., blobs and trees that have not yet been committed). This patch adds an option to do so. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-16reachable: reuse revision.c "add all reflogs" codeLibravatar Jeff King1-0/+1
We want to add all reflog entries as tips for finding reachable objects. The revision machinery can already do this (to support "rev-list --reflog"); we can reuse that code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-08Merge branch 'jk/pack-bitmap'Libravatar Junio C Hamano1-1/+2
* jk/pack-bitmap: pack-objects: do not reuse packfiles without --delta-base-offset add `ignore_missing_links` mode to revwalk
2014-04-04add `ignore_missing_links` mode to revwalkLibravatar Vicent Marti1-1/+2
When pack-objects is computing the reachability bitmap to serve a fetch request, it can erroneously die() if some of the UNINTERESTING objects are not present. Upload-pack throws away HAVE lines from the client for objects we do not have, but we may have a tip object without all of its ancestors (e.g., if the tip is no longer reachable and was new enough to survive a `git prune`, but some of its reachable objects did get pruned). In the non-bitmap case, we do a revision walk with the HAVE objects marked as UNINTERESTING. The revision walker explicitly ignores errors in accessing UNINTERESTING commits to handle this case (and we do not bother looking at UNINTERESTING trees or blobs at all). When we have bitmaps, however, the process is quite different. The bitmap index for a pack-objects run is calculated in two separate steps: First, we perform an extensive walk from all the HAVEs to find the full set of objects reachable from them. This walk is usually optimized away because we are expected to hit an object with a bitmap during the traversal, which allows us to terminate early. Secondly, we perform an extensive walk from all the WANTs, which usually also terminates early because we hit a commit with an existing bitmap. Once we have the resulting bitmaps from the two walks, we AND-NOT them together to obtain the resulting set of objects we need to pack. When we are walking the HAVE objects, the revision walker does not know that we are walking it only to mark the results as uninteresting. We strip out the UNINTERESTING flag, because those objects _are_ interesting to us during the first walk. We want to keep going to get a complete set of reachable objects if we can. We need some way to tell the revision walker that it's OK to silently truncate the HAVE walk, just like it does for the UNINTERESTING case. This patch introduces a new `ignore_missing_links` flag to the `rev_info` struct, which we set only for the HAVE walk. It also adds tests to cover UNINTERESTING objects missing from several positions: a missing blob, a missing tree, and a missing parent commit. The missing blob already worked (as we do not care about its contents at all), but the other two cases caused us to die(). Note that there are a few cases we do not need to test: 1. We do not need to test a missing tree, with the blob still present. Without the tree that refers to it, we would not know that the blob is relevant to our walk. 2. We do not need to test a tip commit that is missing. Upload-pack omits these for us (and in fact, we complain even in the non-bitmap case if it fails to do so). Reported-by: Siddharth Agarwal <sid0@fb.com> Signed-off-by: Vicent Marti <tanoku@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-03Merge branch 'nd/log-show-linear-break'Libravatar Junio C Hamano1-1/+10
Attempts to show where a single-strand-of-pearls break in "git log" output. * nd/log-show-linear-break: log: add --show-linear-break to help see non-linear history object.h: centralize object flag allocation
2014-03-25log: add --show-linear-break to help see non-linear historyLibravatar Nguyễn Thái Ngọc Duy1-1/+9
Option explanation is in rev-list-options.txt. The interaction with -z is left undecided. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-25object.h: centralize object flag allocationLibravatar Nguyễn Thái Ngọc Duy1-0/+1
While the field "flags" is mainly used by the revision walker, it is also used in many other places. Centralize the whole flag allocation to one place for a better overview (and easier to move flags if we have too). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-27Merge branch 'jk/pack-bitmap'Libravatar Junio C Hamano1-0/+2
Borrow the bitmap index into packfiles from JGit to speed up enumeration of objects involved in a commit range without having to fully traverse the history. * jk/pack-bitmap: (26 commits) ewah: unconditionally ntohll ewah data ewah: support platforms that require aligned reads read-cache: use get_be32 instead of hand-rolled ntoh_l block-sha1: factor out get_be and put_be wrappers do not discard revindex when re-preparing packfiles pack-bitmap: implement optional name_hash cache t/perf: add tests for pack bitmaps t: add basic bitmap functionality tests count-objects: recognize .bitmap in garbage-checking repack: consider bitmaps when performing repacks repack: handle optional files created by pack-objects repack: turn exts array into array-of-struct repack: stop using magic number for ARRAY_SIZE(exts) pack-objects: implement bitmap writing rev-list: add bitmap mode to speed up object lists pack-objects: use bitmaps when packing objects pack-objects: split add_object_entry pack-bitmap: add support for bitmap indexes documentation: add documentation for the bitmap format ewah: compressed bitmap implementation ...
2013-12-05Merge branch 'jc/ref-excludes'Libravatar Junio C Hamano1-0/+8
People often wished a way to tell "git log --branches" (and "git log --remotes --not --branches") to exclude some local branches from the expansion of "--branches" (similarly for "--tags", "--all" and "--glob=<pattern>"). Now they have one. * jc/ref-excludes: rev-parse: introduce --exclude=<glob> to tame wildcards rev-list --exclude: export add/clear-ref-exclusion and ref-excluded API rev-list --exclude: tests document --exclude option revision: introduce --exclude=<glob> to tame wildcards
2013-11-01rev-list --exclude: export add/clear-ref-exclusion and ref-excluded APILibravatar Junio C Hamano1-0/+5
... while updating their function signature. To be squashed into the initial patch to rev-list. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-31revision: add missing includeLibravatar Felipe Contreras1-0/+1
Otherwise we might not have 'struct diff_options'. [jc: needs a matching follow-up patch to remove inclusion of diff.h from *.c files that do not themselves use anything from diff.h] Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-24revision: allow setting custom limiter functionLibravatar Vicent Marti1-0/+2
This commit enables users of `struct rev_info` to peform custom limiting during a revision walk (i.e. `get_revision`). If the field `include_check` has been set to a callback, this callback will be issued once for each commit before it is added to the "pending" list of the revwalk. If the include check returns 0, the commit will be marked as added but won't be pushed to the pending list, effectively limiting the walk. Signed-off-by: Vicent Marti <tanoku@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-30revision: introduce --exclude=<glob> to tame wildcardsLibravatar Junio C Hamano1-0/+3
People often find "git log --branches" etc. that includes _all_ branches is cumbersome to use when they want to grab most but except some. The same applies to --tags, --all and --glob. Teach the revision machinery to remember patterns, and then upon the next such a globbing option, exclude those that match the pattern. With this, I can view only my integration branches (e.g. maint, master, etc.) without topic branches, which are named after two letters from primary authors' names, slash and topic name. git rev-list --no-walk --exclude=??/* --branches | git name-rev --refs refs/heads/* --stdin This one shows things reachable from local and remote branches that have not been merged to the integration branches. git log --remotes --branches --not --exclude=??/* --branches It may be a bit rough around the edges, in that the pattern to give the exclude option depends on what globbing option follows. In these examples, the pattern "??/*" is used, not "refs/heads/??/*", because the globbing option that follows the -"-exclude=<pattern>" is "--branches". As each use of globbing option resets previously set "--exclude", this may not be such a bad thing, though. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-01log: use true parents for diff even when rewritingLibravatar Thomas Rast1-0/+20
When using pathspec filtering in combination with diff-based log output, parent simplification happens before the diff is computed. The diff is therefore against the *simplified* parents. This works okay, arguably by accident, in the normal case: simplification reduces to one parent as long as the commit is TREESAME to it. So the simplified parent of any given commit must have the same tree contents on the filtered paths as its true (unfiltered) parent. However, --full-diff breaks this guarantee, and indeed gives pretty spectacular results when comparing the output of git log --graph --stat ... git log --graph --full-diff --stat ... (--graph internally kicks in parent simplification, much like --parents). To fix it, store a copy of the parent list before simplification (in a slab) whenever --full-diff is in effect. Then use the stored parents instead of the simplified ones in the commit display code paths. The latter do not actually check for --full-diff to avoid duplicated code; they just grab the original parents if save_parents() has not been called for this revision walk. For ordinary commits it should be obvious that this is the right thing to do. Merge commits are a bit subtle. Observe that with default simplification, merge simplification is an all-or-nothing decision: either the merge is TREESAME to one parent and disappears, or it is different from all parents and the parent list remains intact. Redundant parents are not pruned, so the existing code also shows them as a merge. So if we do show a merge commit, the parent list just consists of the rewrite result on each parent. Running, e.g., --cc on this in --full-diff mode is not very useful: if any commits were skipped, some hunks will disagree with all sides of the merge (with one side, because commits were skipped; with the others, because they didn't have those changes in the first place). This triggers --cc showing these hunks spuriously. Therefore I believe that even for merge commits it is better to show the diffs wrt. the original parents. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-03teach format-patch to place other authors into in-body "From"Libravatar Jeff King1-0/+1
Format-patch generates emails with the "From" address set to the author of each patch. If you are going to send the emails, however, you would want to replace the author identity with yours (if they are not the same), and bump the author identity to an in-body header. Normally this is handled by git-send-email, which does the transformation before sending out the emails. However, some workflows may not use send-email (e.g., imap-send, or a custom script which feeds the mbox to a non-git MUA). They could each implement this feature themselves, but getting it right is non-trivial (one must canonicalize the identities by reversing any RFC2047 encoding or RFC822 quoting of the headers, which has caused many bugs in send-email over the years). This patch takes a different approach: it teaches format-patch a "--from" option which handles the ident check and in-body header while it is writing out the email. It's much simpler to do at this level (because we haven't done any quoting yet), and any workflow based on format-patch can easily turn it on. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-01Merge branch 'jc/topo-author-date-sort'Libravatar Junio C Hamano1-1/+5
"git log" learned the "--author-date-order" option, with which the output is topologically sorted and commits in parallel histories are shown intermixed together based on the author timestamp. * jc/topo-author-date-sort: t6003: add --author-date-order test topology tests: teach a helper to set author dates as well t6003: add --date-order test topology tests: teach a helper to take abbreviated timestamps t/lib-t6000: style fixes log: --author-date-order sort-in-topological-order: use prio-queue prio-queue: priority queue of pointers to structs toposort: rename "lifo" field
2013-06-14Merge branch 'mh/reflife'Libravatar Junio C Hamano1-11/+21
Define memory ownership and lifetime rules for what for-each-ref feeds to its callbacks (in short, "you do not own it, so make a copy if you want to keep it"). * mh/reflife: (25 commits) refs: document the lifetime of the args passed to each_ref_fn register_ref(): make a copy of the bad reference SHA-1 exclude_existing(): set existing_refs.strdup_strings string_list_add_refs_by_glob(): add a comment about memory management string_list_add_one_ref(): rename first parameter to "refname" show_head_ref(): rename first parameter to "refname" show_head_ref(): do not shadow name of argument add_existing(): do not retain a reference to sha1 do_fetch(): clean up existing_refs before exiting do_fetch(): reduce scope of peer_item object_array_entry: fix memory handling of the name field find_first_merges(): remove unnecessary code find_first_merges(): initialize merges variable using initializer fsck: don't put a void*-shaped peg in a char*-shaped hole object_array_remove_duplicates(): rewrite to reduce copying revision: use object_array_filter() in implementation of gc_boundary() object_array: add function object_array_filter() revision: split some overly-long lines cmd_diff(): make it obvious which cases are exclusive of each other cmd_diff(): rename local variable "list" -> "entry" ...
2013-06-14Merge branch 'kb/full-history-compute-treesame-carefully-2'Libravatar Junio C Hamano1-1/+3
Major update to the revision traversal logic to improve culling of irrelevant parents while traversing a mergy history. * kb/full-history-compute-treesame-carefully-2: revision.c: make default history consider bottom commits revision.c: don't show all merges for --parents revision.c: discount side branches when computing TREESAME revision.c: add BOTTOM flag for commits simplify-merges: drop merge from irrelevant side branch simplify-merges: never remove all TREESAME parents t6012: update test for tweaked full-history traversal revision.c: Make --full-history consider more merges Documentation: avoid "uninteresting" rev-list-options.txt: correct TREESAME for P t6111: add parents to tests t6111: allow checking the parents as well t6111: new TREESAME test set t6019: test file dropped in -s ours merge decorate.c: compact table when growing
2013-06-11toposort: rename "lifo" fieldLibravatar Junio C Hamano1-1/+5
The primary invariant of sort_in_topological_order() is that a parent commit is not emitted until all children of it are. When traversing a forked history like this with "git log C E": A----B----C \ D----E we ensure that A is emitted after all of B, C, D, and E are done, B has to wait until C is done, and D has to wait until E is done. In some applications, however, we would further want to control how these child commits B, C, D and E on two parallel ancestry chains are shown. Most of the time, we would want to see C and B emitted together, and then E and D, and finally A (i.e. the --topo-order output). The "lifo" parameter of the sort_in_topological_order() function is used to control this behaviour. We start the traversal by knowing two commits, C and E. While keeping in mind that we also need to inspect E later, we pick C first to inspect, and we notice and record that B needs to be inspected. By structuring the "work to be done" set as a LIFO stack, we ensure that B is inspected next, before other in-flight commits we had known that we will need to inspect, e.g. E. When showing in --date-order, we would want to see commits ordered by timestamps, i.e. show C, E, B and D in this order before showing A, possibly mixing commits from two parallel histories together. When "lifo" parameter is set to false, the function keeps the "work to be done" set sorted in the date order to realize this semantics. After inspecting C, we add B to the "work to be done" set, but the next commit we inspect from the set is E which is newer than B. The name "lifo", however, is too strongly tied to the way how the function implements its behaviour, and does not describe what the behaviour _means_. Replace this field with an enum rev_sort_order, with two possible values: REV_SORT_IN_GRAPH_ORDER and REV_SORT_BY_COMMIT_DATE, and update the existing code. The mechanical replacement rule is: "lifo == 0" is equivalent to "sort_order == REV_SORT_BY_COMMIT_DATE" "lifo == 1" is equivalent to "sort_order == REV_SORT_IN_GRAPH_ORDER" Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-02Merge branch 'tr/line-log'Libravatar Junio C Hamano1-1/+15
* tr/line-log: git-log(1): remove --full-line-diff description line-log: fix documentation formatting log -L: improve comments in process_all_files() log -L: store the path instead of a diff_filespec log -L: test merge of parallel modify/rename t4211: pass -M to 'git log -M -L...' test log -L: fix overlapping input ranges log -L: check range set invariants when we look it up Speed up log -L... -M log -L: :pattern:file syntax to find by funcname Implement line-history search (git log -L) Export rewrite_parents() for 'log -L' Refactor parse_loc
2013-05-28revision: split some overly-long linesLibravatar Michael Haggerty1-11/+21
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-16revision.c: add BOTTOM flag for commitsLibravatar Kevin Bracey1-1/+2
When performing edge-based operations on the revision graph, it can be useful to be able to identify the INTERESTING graph's connection(s) to the bottom commit(s) specified by the user. Conceptually when the user specifies "A..B" (== B ^A), they are asking for the history from A to B. The first connection from A onto the INTERESTING graph is part of that history, and should be considered. If we consider only INTERESTING nodes and their connections, then we're really only considering the history from A's immediate descendants to B. This patch does not change behaviour, but adds a new BOTTOM flag to indicate the bottom commits specified by the user, ready to be used by following patches. We immediately use the BOTTOM flag to return collect_bottom_commits() to its original approach of examining the pending commit list rather than the command line. This will ensure alignment of the definition of "bottom" with future patches. Signed-off-by: Kevin Bracey <kevin@bracey.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-16revision.c: Make --full-history consider more mergesLibravatar Kevin Bracey1-0/+1
History simplification previously always treated merges as TREESAME if they were TREESAME to any parent. While this was consistent with the default behaviour, this could be extremely unhelpful when searching detailed history, and could not be overridden. For example, if a merge had ignored a change, as if by "-s ours", then: git log -m -p --full-history -Schange file would successfully locate "change"'s addition but would not locate the merge that resolved against it. Futher, simplify_merges could drop the actual parent that a commit was TREESAME to, leaving it as a normal commit marked TREESAME that isn't actually TREESAME to its remaining parent. Now redefine a commit's TREESAME flag to be true only if a commit is TREESAME to _all_ of its parents. This doesn't affect either the default simplify_history behaviour (because partially TREESAME merges are turned into normal commits), or full-history with parent rewriting (because all merges are output). But it does affect other modes. The clearest difference is that --full-history will show more merges - sufficient to ensure that -m -p --full-history log searches can really explain every change to the file, including those changes' ultimate fate in merges. Also modify simplify_merges to recalculate TREESAME after removing a parent. This is achieved by storing per-parent TREESAME flags on the initial scan, so the combined flag can be easily recomputed. This fixes some t6111 failures, but creates a couple of new ones - we are now showing some merges that don't need to be shown. Signed-off-by: Kevin Bracey <kevin@bracey.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-16revision.c: treat A...B merge bases as if manually specifiedLibravatar Kevin Bracey1-0/+1
The documentation assures users that "A...B" is defined as "A B --not $(git merge-base --all A B)". This wasn't in fact quite true, because the calculated merge bases were not sent to add_rev_cmdline(). The main effect of this was that although git rev-list --ancestry-path A B --not $(git merge-base --all A B) worked, the simpler form git rev-list --ancestry-path A...B failed with a "no bottom commits" error. Other potential users of bottom commits could also be affected by this problem, if they examine revs->cmdline_info; I came across the issue in my proposed history traversal refinements series. So ensure that the calculated merge bases are sent to add_rev_cmdline(), flagged with new 'whence' enum value REV_CMD_MERGE_BASE. Signed-off-by: Kevin Bracey <kevin@bracey.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-01Merge branch 'bc/append-signed-off-by'Libravatar Junio C Hamano1-1/+1
Consolidate codepaths that inspect log-message-to-be and decide to add a new Signed-off-by line in various commands. * bc/append-signed-off-by: git-commit: populate the edit buffer with 2 blank lines before s-o-b Unify appending signoff in format-patch, commit and sequencer format-patch: update append_signoff prototype t4014: more tests about appending s-o-b lines sequencer.c: teach append_signoff to avoid adding a duplicate newline sequencer.c: teach append_signoff how to detect duplicate s-o-b sequencer.c: always separate "(cherry picked from" from commit body sequencer.c: require a conforming footer to be preceded by a blank line sequencer.c: recognize "(cherry picked from ..." as part of s-o-b footer t/t3511: add some tests of 'cherry-pick -s' functionality t/test-lib-functions.sh: allow to specify the tag name to test_commit commit, cherry-pick -s: remove broken support for multiline rfc2822 fields sequencer.c: rework search for start of footer to improve clarity
2013-03-28Implement line-history search (git log -L)Libravatar Thomas Rast1-1/+5
This is a rewrite of much of Bo's work, mainly in an effort to split it into smaller, easier to understand routines. The algorithm is built around the struct range_set, which encodes a series of line ranges as intervals [a,b). This is used in two contexts: * A set of lines we are tracking (which will change as we dig through history). * To encode diffs, as pairs of ranges. The main routine is range_set_map_across_diff(). It processes the diff between a commit C and some parent P. It determines which diff hunks are relevant to the ranges tracked in C, and computes the new ranges for P. The algorithm is then simply to process history in topological order from newest to oldest, computing ranges and (partial) diffs. At branch points, we need to merge the ranges we are watching. We will find that many commits do not affect the chosen ranges, and mark them TREESAME (in addition to those already filtered by pathspec limiting). Another pass of history simplification then gets rid of such commits. This is wired as an extra filtering pass in the log machinery. This currently only reduces code duplication, but should allow for other simplifications and options to be used. Finally, we hook a diff printer into the output chain. Ideally we would wire directly into the diff logic, to optionally use features like word diff. However, that will require some major reworking of the diff chain, so we completely replace the output with our own diff for now. As this was a GSoC project, and has quite some history by now, many people have helped. In no particular order, thanks go to Jakub Narebski <jnareb@gmail.com> Jens Lehmann <Jens.Lehmann@web.de> Jonathan Nieder <jrnieder@gmail.com> Junio C Hamano <gitster@pobox.com> Ramsay Jones <ramsay@ramsay1.demon.co.uk> Will Palmer <wmpalmer@gmail.com> Apologies to everyone I forgot. Signed-off-by: Bo Yang <struggleyb.nku@gmail.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-28Export rewrite_parents() for 'log -L'Libravatar Bo Yang1-0/+10
The function rewrite_one is used to rewrite a single parent of the current commit, and is used by rewrite_parents to rewrite all the parents. Decouple the dependence between them by making rewrite_one a callback function that is passed to rewrite_parents. Then export rewrite_parents for reuse by the line history browser. We will use this function in line-log.c. Signed-off-by: Bo Yang <struggleyb.nku@gmail.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-12format-patch: update append_signoff prototypeLibravatar Nguyễn Thái Ngọc Duy1-1/+1
This is a preparation step for merging with append_signoff from sequencer.c Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Brandon Casey <bcasey@nvidia.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-20Merge branch 'ap/log-mailmap'Libravatar Junio C Hamano1-0/+1
Teach commands in the "log" family to optionally pay attention to the mailmap. * ap/log-mailmap: log --use-mailmap: optimize for cases without --author/--committer search log: add log.mailmap configuration option log: grep author/committer using mailmap test: add test for --use-mailmap option log: add --use-mailmap option pretty: use mailmap to display username and email mailmap: add mailmap structure to rev_info and pp mailmap: simplify map_user() interface mailmap: remove email copy and length limitation Use split_ident_line to parse author and committer string-list: allow case-insensitive string list
2013-01-11Merge branch 'jc/format-patch-reroll'Libravatar Junio C Hamano1-0/+1
Teach "format-patch" to prefix v4- to its output files for the fourth iteration of a patch series, to make it easier for the submitter to keep separate copies for iterations. * jc/format-patch-reroll: format-patch: give --reroll-count a short synonym -v format-patch: document and test --reroll-count format-patch: add --reroll-count=$N option get_patch_filename(): split into two functions get_patch_filename(): drop "just-numbers" hack get_patch_filename(): simplify function signature builtin/log.c: stop using global patch_suffix builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter() builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
2013-01-10mailmap: add mailmap structure to rev_info and ppLibravatar Antoine Pelisse1-0/+1
Pass a mailmap from rev_info to pretty_print_context to so that the pretty printer can use rewritten name and email address when showing commits. Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-22format-patch: add --reroll-count=$N optionLibravatar Junio C Hamano1-0/+1
The --reroll-count=$N option, when given a positive integer: - Adds " v$N" to the subject prefix specified. As the default subject prefix string is "PATCH", --reroll-count=2 makes it "PATCH v2". - Prefixes "v$N-" to the names used for output files. The cover letter, whose name is usually 0000-cover-letter.patch, becomes v2-0000-cover-letter.patch when given --reroll-count=2. This allows users to use the same --output-directory for multiple iterations of the same series, without letting the output for a newer round overwrite output files from the earlier rounds. The user can incorporate materials from earlier rounds to update the newly minted iteration, and use "send-email v2-*.patch" to send out the patches belonging to the second iteration easily. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-17format-patch --notes: show notes after three-dashesLibravatar Junio C Hamano1-0/+1
When inserting the note after the commit log message to format-patch output, add three dashes before the note. Record the fact that we did so in the rev_info and omit showing duplicated three dashes in the usual codepath that is used when notes are not being shown. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-10Merge branch 'mz/cherry-pick-cmdline-order'Libravatar Junio C Hamano1-1/+5
"git cherry-pick A C B" used to replay changes in A and then B and then C if these three commits had committer timestamps in that order, which is not what the user who said "A C B" naturally expects. * mz/cherry-pick-cmdline-order: cherry-pick/revert: respect order of revisions to pick demonstrate broken 'git cherry-pick three one two' teach log --no-walk=unsorted, which avoids sorting
2012-08-30teach log --no-walk=unsorted, which avoids sortingLibravatar Martin von Zweigbergk1-1/+5
When 'git log' is passed the --no-walk option, no revision walk takes place, naturally. Perhaps somewhat surprisingly, however, the provided revisions still get sorted by commit date. So e.g 'git log --no-walk HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result (unless the two revisions share the commit date, in which case they will retain the order given on the command line). As the commit that introduced --no-walk (8e64006 (Teach revision machinery about --no-walk, 2007-07-24)) points out, the sorting is intentional, to allow things like git log --abbrev-commit --pretty=oneline --decorate --all --no-walk to show all refs in order by commit date. But there are also other cases where the sorting is not wanted, such as <command producing revisions in order> | git log --oneline --no-walk --stdin To accomodate both cases, leave the decision of whether or not to sort up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting to 'sorted' for backward-compatibility reasons. Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-22Merge branch 'jc/sha1-name-more'Libravatar Junio C Hamano1-1/+4
Teaches the object name parser things like a "git describe" output is always a commit object, "A" in "git log A" must be a committish, and "A" and "B" in "git log A...B" both must be committish, etc., to prolong the lifetime of abbreviated object names. * jc/sha1-name-more: (27 commits) t1512: match the "other" object names t1512: ignore whitespaces in wc -l output rev-parse --disambiguate=<prefix> rev-parse: A and B in "rev-parse A..B" refer to committish reset: the command takes committish commit-tree: the command wants a tree and commits apply: --build-fake-ancestor expects blobs sha1_name.c: add support for disambiguating other types revision.c: the "log" family, except for "show", takes committish revision.c: allow handle_revision_arg() to take other flags sha1_name.c: introduce get_sha1_committish() sha1_name.c: teach lookup context to get_sha1_with_context() sha1_name.c: many short names can only be committish sha1_name.c: get_sha1_1() takes lookup flags sha1_name.c: get_describe_name() by definition groks only commits sha1_name.c: teach get_short_sha1() a commit-only option sha1_name.c: allow get_short_sha1() to take other flags get_sha1(): fix error status regression sha1_name.c: restructure disambiguation of short names sha1_name.c: correct misnamed "canonical" and "res" ...
2012-07-09revision.c: the "log" family, except for "show", takes committishLibravatar Junio C Hamano1-0/+2
Add a field to setup_revision_opt structure and allow these callers to tell the setup_revisions command parsing machinery that short SHA1 it encounters are meant to name committish. This step does not go all the way to connect the setup_revisions() to sha1_name.c yet. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-09revision.c: allow handle_revision_arg() to take other flagsLibravatar Junio C Hamano1-1/+2
The existing "cant_be_filename" that tells the function that the caller knows the arg is not a path (hence it does not have to be checked for absense of the file whose name matches it) is made into a bit in the flag word. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-27Merge branch 'cb/cherry-pick-rev-path-confusion'Libravatar Junio C Hamano1-0/+1
The command line parser choked "git cherry-pick $name" when $name can be both revision name and a pathname, even though $name can never be a path in the context of the command. The issue the patch addresses is real, but the way it is implemented felt unnecessarily invasive a bit. It may be cleaner for this caller to add the "--" to the end of the argv_array it passes to setup_revisions(). By Clemens Buchacher * cb/cherry-pick-rev-path-confusion: cherry-pick: do not expect file arguments
2012-04-15cherry-pick: do not expect file argumentsLibravatar Clemens Buchacher1-0/+1
If a commit-ish passed to cherry-pick or revert happens to have a file of the same name, git complains that the argument is ambiguous and advises to use '--'. To make things worse, the '--' argument is removed by parse_options, und so passing '--' has no effect. Instead, always interpret cherry-pick/revert arguments as revisions. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-30Teach revision walking machinery to walk multiple times sequenciallyLibravatar Heiko Voigt1-0/+1
Previously it was not possible to iterate revisions twice using the revision walking api. We add a reset_revision_walk() which clears the used flags. This allows us to do multiple sequencial revision walks. We add the appropriate calls to the existing submodule machinery doing revision walks. This is done to avoid surprises if future code wants to call these functions more than once during the processes lifetime. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-12log: --show-signatureLibravatar Junio C Hamano1-0/+1
This teaches the "log" family of commands to pass the GPG signature in the commit objects to "gpg --verify" via the verify_signed_buffer() interface used to verify signed tag objects. E.g. $ git show --show-signature -s HEAD shows GPG output in the header part of the output. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-13Merge branch 'rs/pending'Libravatar Junio C Hamano1-0/+2
* rs/pending: commit: factor out clear_commit_marks_for_object_array checkout: use leak_pending flag bundle: use leak_pending flag bisect: use leak_pending flag revision: add leak_pending flag checkout: use add_pending_{object,sha1} in orphan check revision: factor out add_pending_sha1 checkout: check for "Previous HEAD" notice in t2020 Conflicts: builtin/checkout.c revision.c