| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* tr/maint-cherry-pick-list:
cherry_pick_list: quit early if one side is empty
|
|
The --cherry-pick logic starts by counting the commits on each side,
so that it can filter away commits on the bigger one. However, so
far it missed an opportunity for optimization: it doesn't need to do
any work if either side is empty.
This in particular helps the common use-case 'git rebase -i HEAD~$n':
it internally uses --cherry-pick, but since HEAD~$n is a direct
ancestor the left side is always empty.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option should be treated pretty much the same as --format="%h %s".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Giving "Notes" information in the default output format of "log" and
"show" is a sensible progress (the user has asked for it by having the
notes), but for some commands (e.g. "format-patch") spewing notes into the
formatted commit log message without being asked is too aggressive.
Enable notes output only for "log", "show", "whatchanged" by default and
only when the user didn't ask any specific --pretty/--format from the
command line; users can explicitly override this default with --show-notes
and --no-notes option.
Parts of tests are taken from Jeff King's fix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/log-stdin:
Add trivial tests for --stdin option to log family
Make --stdin option to "log" family read also pathspecs
setup_revisions(): do not call get_pathspec() too early
Teach --stdin option to "log" family
read_revision_from_stdin(): use strbuf
Conflicts:
revision.c
|
|
Similar to the command line arguments, after giving zero or more revs, you can
feed a line "--" and then feed pathspecs one at a time.
With this
(
echo ^maint
echo --
echo Documentation
) | git log --stat --oneline --stdin master -- t
lists commits that touch Documentation/ or t/ between maint and master.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is necessary because we will later allow pathspecs to be fed from the
standard input, and pathspecs taken from the command line (and converted
via get_pathspec() already) in revs->prune_data too early gets in the way
when we want to append from the standard input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the logic to read revs from standard input that rev-list knows about
from it to revision machinery, so that all the users of setup_revisions()
can feed the list of revs from the standard input when "--stdin" is used
on the command line.
Allow some users of the revision machinery that want different semantics
from the "--stdin" option to disable it by setting an option in the
rev_info structure.
This also cleans up the kludge made to bundle.c via cut and paste.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is so 2005 (and Linus ;-) to have a fixed 1000-byte buffer that
reads from the user. Let's use strbuf to unlimit the input length.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I personally use "git bisect visualize" all the time when I bisect, but it
turns out that that is not a very flexible model. Sometimes I want to do
bisection based on all commits (no pathname limiting), but then visualize
the current bisection tree with just a few pathnames because I _suspect_
those pathnames are involved in the problem but am not totally sure about
them.
And at other times, I want to use other revision parsing logic, none of
which is available with "git bisect visualize".
So this adds "--bisect" as a revision parsing argument, and as a result it
just works with all the normal logging tools. So now I can just do
gitk --bisect --simplify-by-decoration filename-here
etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we show a reflog, we have two ways of naming the entry:
by sequence number (e.g., HEAD@{0}) or by date (e.g.,
HEAD@{10 minutes ago}). There is no explicit option to set
one or the other, but we guess based on whether or not the
user has provided us with a date format, showing them the
date version if they have done so, and the sequence number
otherwise.
This usually made sense if the use did something like "git
log -g --date=relative". However, it didn't make much sense
if the user set the date format using the log.date config
variable; in that case, all of their reflogs would end up as
dates.
This patch records the source of the date format and only
triggers the date-based view if --date= was given on the
command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* as/maint-graph-interesting-fix:
Add tests for rev-list --graph with options that simplify history
graph API: fix bug in graph_is_interesting()
|
|
Previously, graph_is_interesting() did not behave quite the same way as
the code in get_revision(). As a result, it would sometimes think
commits were uninteresting, even though get_revision() would return
them. This resulted in incorrect lines in the graph output.
This change creates a get_commit_action() function, which
graph_is_interesting() and simplify_commit() both now use to determine
if a commit will be shown. It is identical to the old simplify_commit()
behavior, except that it never calls rewrite_parents().
This problem was reported by Santi Béjar. The following command
would exhibit the problem before, but now works correctly:
git log --graph --simplify-by-decoration --oneline v1.6.3.3
Previously git graph did not display the output for this command
correctly between f29ac4f and 66996ec, among other places.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For some reason, I ended up doing
git show HEAD~5..
as an odd way of asking for a log. I realize I should just have used "git
log", but at the same time it does make perfect conceptual sense. After
all, you _could_ have done
git show HEAD HEAD~1 HEAD~2 HEAD~3 HEAD~4
and saying "git show HEAD~5.." is pretty natural. It's not like "git show"
only ever showed a single commit (or other object) before either! So
conceptually, giving a commit range is a very sensible operation, even
though you'd traditionally have used "git log" for that.
However, doing that currently results in an error
fatal: object ranges do not make sense when not walking revisions
which admittedly _also_ makes perfect sense - from an internal git
implementation standpoint in 'revision.c'.
However, I think that asking to show a range makes sense to a user, while
saying "object ranges no not make sense when not walking revisions" only
makes sense to a git developer.
So on the whole, of the two different "makes perfect sense" behaviors, I
think I originally picked the wrong one. And quite frankly, I don't really
see anybody actually _depending_ on that error case. So why not change it?
So rather than error out, just turn that non-walking error case into a
"silently turn on walking" instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I do various statistics on git, and one of the things I look at is merges,
because they are often interesting events to count ("how many merges vs
how much 'real development'" kind of statistics). And you can do it with
some fairly straightforward scripting, ie
git rev-list --parents HEAD |
grep ' .* ' |
git diff-tree --always -s --pretty=oneline --stdin |
less -S
will do it.
But I finally got irritated with the fact that we can skip merges with
'--no-merges', but we can't do the trivial reverse operation.
So this just adds a '--merges' flag that _only_ shows merges. Now you can
do the above with just a
git log --merges --pretty=oneline
which is a lot simpler. It also means that we automatically get a lot of
statistics for free, eg
git shortlog -ns --merges
does exactly what you'd want it to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This simplifies the logic of rev_compare_tree() by removing a special
case.
It does so by turning the special case of finding a diff to be "all new
files" into a more generic case of "all new" vs "all removed" vs "mixed
changes", so now the code is actually more powerful and more generic, and
the added symmetry actually makes it simpler too.
This makes no changes to any existing behavior, but apart from the
simplification it does make it possible to some day care about whether all
changes were just deletions if we want to. Which we may well want to for
merge handling.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lt/pack-object-memuse:
show_object(): push path_name() call further down
process_{tree,blob}: show objects without buffering
Conflicts:
builtin-pack-objects.c
builtin-rev-list.c
list-objects.c
list-objects.h
upload-pack.c
|
|
In particular, pushing the "path_name()" call _into_ the show() function
would seem to allow
- more clarity into who "owns" the name (ie now when we free the name in
the show_object callback, it's because we generated it ourselves by
calling path_name())
- not calling path_name() at all, either because we don't care about the
name in the first place, or because we are actually happy walking the
linked list of "struct name_path *" and the last component.
Now, I didn't do that latter optimization, because it would require some
more coding, but especially looking at "builtin-pack-objects.c", we really
don't even want the whole pathname, we really would be better off with the
list of path components.
Why? We use that name for two things:
- add_preferred_base_object(), which actually _wants_ to traverse the
path, and now does it by looking for '/' characters!
- for 'name_hash()', which only cares about the last 16 characters of a
name, so again, generating the full name seems to be just unnecessary
work.
Anyway, so I didn't look any closer at those things, but it did convince
me that the "show_object()" calling convention was crazy, and we're
actually better off doing _less_ in list-objects.c, and giving people
access to the internal data structures so that they can decide whether
they want to generate a path-name or not.
This patch does that, and then for people who did use the name (even if
they might do something more clever in the future), it just does the
straightforward "name = path_name(path, component); .. free(name);" thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Here's a less trivial thing, and slightly more dubious one.
I was looking at that "struct object_array objects", and wondering why we
do that. I have honestly totally forgotten. Why not just call the "show()"
function as we encounter the objects? Rather than add the objects to the
object_array, and then at the very end going through the array and doing a
'show' on all, just do things more incrementally.
Now, there are possible downsides to this:
- the "buffer using object_array" _can_ in theory result in at least
better I-cache usage (two tight loops rather than one more spread out
one). I don't think this is a real issue, but in theory..
- this _does_ change the order of the objects printed. Instead of doing a
"process_tree(revs, commit->tree, &objects, NULL, "");" in the loop
over the commits (which puts all the root trees _first_ in the object
list, this patch just adds them to the list of pending objects, and
then we'll traverse them in that order (and thus show each root tree
object together with the objects we discover under it)
I _think_ the new ordering actually makes more sense, but the object
ordering is actually a subtle thing when it comes to packing
efficiency, so any change in order is going to have implications for
packing. Good or bad, I dunno.
- There may be some reason why we did it that odd way with the object
array, that I have simply forgotten.
Anyway, now that we don't buffer up the objects before showing them
that may actually result in lower memory usage during that whole
traverse_commit_list() phase.
This is seriously not very deeply tested. It makes sense to me, it seems
to pass all the tests, it looks ok, but...
Does anybody remember why we did that "object_array" thing? It used to be
an "object_list" a long long time ago, but got changed into the array due
to better memory usage patterns (those linked lists of obejcts are
horrible from a memory allocation standpoint). But I wonder why we didn't
do this back then. Maybe there's a reason for it.
Or maybe there _used_ to be a reason, and no longer is.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
|
|
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-1.6.0-keep-pack:
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
|
|
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two are often used together but are too long to type.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some people prefer to call the pretty-print styles "format", and get
annoyed to see "git log --format=short" fail. Introduce it as a synonym
to --pretty so that both can be used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
revision traversal and pack: notice and die on missing commit
|
|
* maint-1.5.6:
revision traversal and pack: notice and die on missing commit
|
|
* maint-1.5.5:
revision traversal and pack: notice and die on missing commit
Conflicts:
revision.c
|
|
* maint-1.5.4:
revision traversal and pack: notice and die on missing commit
|
|
cc0e6c5 (Handle return code of parse_commit in revision machinery,
2007-05-04) attempted to tighten error checking in the revision machinery,
but it wasn't enough. When get_revision_1() was asked for the next commit
to return, it tries to read and simplify the parents of the commit to be
returned, but an error while doing so was silently ignored and reported as
a truncated history to the caller instead.
This resulted in an early end of "git log" output or a pack that lacks
older commits from "git pack-objects", without any error indication in the
exit status from these commands, even though the underlying parse_commit()
issues an error message to the end user.
Note that the codepath in add_parents_list() that paints parents of an
UNINTERESTING commit UNINTERESTING silently ignores the error when
parse_commit() fails; this is deliberate and in line with aeeae1b
(revision traversal: allow UNINTERESTING objects to be missing,
2009-01-27).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-all-implies-HEAD:
bundle: allow the same ref to be given more than once
revision walker: include a detached HEAD in --all
|
|
* jc/maint-allow-uninteresting-missing:
revision traversal: allow UNINTERESTING objects to be missing
|
|
Most of the existing codepaths were meant to treat missing uninteresting
objects to be a silently ignored non-error, but there were a few places
in handle_commit() and add_parents_to_list(), which are two key functions
in the revision traversal machinery, that cared:
- When a tag refers to an object that we do not have, we barfed. We
ignore such a tag if it is painted as UNINTERESTING with this change.
- When digging deeper into the ancestry chain of a commit that is already
painted as UNINTERESTING, in order to paint its parents UNINTERESTING,
we barfed if parse_parent() for a parent commit object failed. We can
ignore such a parent commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-all-implies-HEAD:
bundle: allow the same ref to be given more than once
revision walker: include a detached HEAD in --all
|
|
When HEAD is detached, --all should list it, too, logically, as a
detached HEAD is by definition a temporary, unnamed branch.
It is especially necessary to list it when garbage collecting, as
the detached HEAD would be trashed.
Noticed by Thomas Rast.
Note that this affects creating bundles with --all; I contend that it
is a good change to add the HEAD, so that cloning from such a bundle
will give you a current branch. However, I had to fix t5701 as it
assumed that --all does not imply HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: git-svn: fix example for centralized SVN clone
Documentation: fix links to "everyday.html"
revision.c: use proper data type in call to sizeof() within xrealloc
|
|
A type char** was being used instead of char*.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this, you can simplify history not by the contents of the tree, but
whether a commit has been named (ie it's referred to by some branch or
tag) or not.
This makes it possible to see the relationship between different named
commits, without actually seeing any of the details.
When used with pathspec, you would get the usual view that is limited to
the commits that change the contents of the tree plus commits that are
named.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will make it easier to do various clever things that don't depend
on the pure tree contents. It also makes the parameter passing much
simpler - the callers doesn't really look at trees anywhere else, and
it's really the function that should look at the low-level details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already support decorating commits by tags or branches that point to
them, but especially when we are looking at multiple branches together,
we sometimes want to see _how_ we reached a particular commit.
We can abuse the '->util' field in the commit to keep track of that as
we walk the commit lists, and get a reasonably useful view into which
branch or tag first reaches that commit.
Of course, if the commit is reachable through multiple sources (which is
common), our particular choice of "first" reachable is entirely random
and depends on the particular path we happened to follow.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/rev-list-reverse:
t6013: replace use of 'tac' with equivalent Perl
rev-list: fix --reverse interaction with --parents
|
|
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
|
|
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
|
|
--reverse did not interact well with --parents, as the included test
case shows: in a history like
A--B.
\ \
`C--M--D
the command
git rev-list --reverse --parents --full-history HEAD
erroneously lists D as having no parents at all. (Without --reverse,
it correctly lists M.)
This is caused by the machinery driving --reverse: it first grabs all
commits through the normal routines, then runs them through the same
routines again, effectively simplifying them twice.
Fix this by moving the --reverse one level up, into get_revision().
This way we can cleanly grab all commits via the normal calls, then
just pop them off the list one by one without interfering with
get_revision_internal().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Thomas Rast
Linus Torvalds
Jeff King
Adam Simpkins
Lars Hjemli
Mike Ralphson
Brandon Casey
Nanako Shiraishi
Johannes Schindelin