| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All callers to parse_pathspec() must choose between getting no
pathspec or one path that is limited to the current directory
when there is no paths given on the command line, but there were
two callers that violated this rule, triggering a BUG().
* nd/magic-pathspec:
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
|
|
"git rev-list --objects ^v1.0^ v1.0" gave v1.0 tag itself in the
output, but "git rev-list --objects v1.0^..v1.0" did not.
* jc/revision-range-unpeel:
revision: do not peel tags used in range notation
|
|
When parse_pathspec() is called with no paths, the behavior could be
either return no paths, or return one path that is cwd. Some commands
do the former, some the latter. parse_pathspec() itself does not make
either the default and requires the caller to specify either flag if
it may run into this situation.
I've grep'd through all parse_pathspec() call sites. Some pass
neither, but those are guaranteed never pass empty path to
parse_pathspec(). There are two call sites that may pass empty path
and are fixed with this patch.
[jc: added a test from Antoine's bug report]
Reported-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A range notation "A..B" means exactly the same thing as what "^A B"
means, i.e. the set of commits that are reachable from B but not
from A. But the internal representation after the revision parser
parsed these two notations are subtly different.
- "rev-list ^A B" leaves A and B in the revs->pending.objects[]
array, with the former marked as UNINTERESTING and the revision
traversal machinery propagates the mark to underlying commit
objects A^0 and B^0.
- "rev-list A..B" peels tags and leaves A^0 (marked as
UNINTERESTING) and B^0 in revs->pending.objects[] array before
the traversal machinery kicks in.
This difference usually does not matter, but starts to matter when
the --objects option is used. For example, we see this:
$ git rev-list --objects v1.8.4^1..v1.8.4 | grep $(git rev-parse v1.8.4)
$ git rev-list --objects v1.8.4 ^v1.8.4^1 | grep $(git rev-parse v1.8.4)
04f013dc38d7512eadb915eba22efc414f18b869 v1.8.4
With the former invocation, the revision traversal machinery never
hears about the tag v1.8.4 (it only sees the result of peeling it,
i.e. the commit v1.8.4^0), and the tag itself does not appear in the
output. The latter does send the tag object itself to the output.
Make the range notation keep the unpeeled objects and feed them to
the traversal machinery to fix this inconsistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of typing four capital letters "HEAD", you can say "@" now,
e.g. "git log @".
* fc/at-head:
Add new @ shortcut for HEAD
sha1-name: pass len argument to interpret_branch_name()
|
|
* jk/free-tree-buffer:
clear parsed flag when we free tree buffers
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
This is useful to make sure we don't step outside the boundaries of what
we are interpreting at the moment. For example while interpreting
foobar@{u}~1, the job of interpret_branch_name() ends right before ~1,
but there's no way to figure that out inside the function, unless the
len argument is passed.
So let's do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reflog walking logic (git log -g) replaces the true parent list
with the preceding commit in the reflog. This results in bogus commit
diffs when combined with options such as -p; the diff is against the
reflog predecessor, not the parent of the commit.
Save the true parents on the side, extending the functions from the
previous commit. The diff logic picks them up and uses them to show
the correct diffs.
We do have to be somewhat careful about repeated calling of
save_parents(), since the reflog may list a commit more than once. We
now store (commit_list*)-1 to distinguish the "not saved yet" and
"root commit" cases. This lets us preserve an empty parent list even
if save_parents() is repeatedly called.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at there, move free_pathspec() to pathspec.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These call sites follow the pattern:
paths = get_pathspec(prefix, argv);
init_pathspec(&pathspec, paths);
which can be converted into a single parse_pathspec() call.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
|
|
Define memory ownership and lifetime rules for what for-each-ref
feeds to its callbacks (in short, "you do not own it, so make a
copy if you want to keep it").
* mh/reflife: (25 commits)
refs: document the lifetime of the args passed to each_ref_fn
register_ref(): make a copy of the bad reference SHA-1
exclude_existing(): set existing_refs.strdup_strings
string_list_add_refs_by_glob(): add a comment about memory management
string_list_add_one_ref(): rename first parameter to "refname"
show_head_ref(): rename first parameter to "refname"
show_head_ref(): do not shadow name of argument
add_existing(): do not retain a reference to sha1
do_fetch(): clean up existing_refs before exiting
do_fetch(): reduce scope of peer_item
object_array_entry: fix memory handling of the name field
find_first_merges(): remove unnecessary code
find_first_merges(): initialize merges variable using initializer
fsck: don't put a void*-shaped peg in a char*-shaped hole
object_array_remove_duplicates(): rewrite to reduce copying
revision: use object_array_filter() in implementation of gc_boundary()
object_array: add function object_array_filter()
revision: split some overly-long lines
cmd_diff(): make it obvious which cases are exclusive of each other
cmd_diff(): rename local variable "list" -> "entry"
...
|
|
Major update to the revision traversal logic to improve culling of
irrelevant parents while traversing a mergy history.
* kb/full-history-compute-treesame-carefully-2:
revision.c: make default history consider bottom commits
revision.c: don't show all merges for --parents
revision.c: discount side branches when computing TREESAME
revision.c: add BOTTOM flag for commits
simplify-merges: drop merge from irrelevant side branch
simplify-merges: never remove all TREESAME parents
t6012: update test for tweaked full-history traversal
revision.c: Make --full-history consider more merges
Documentation: avoid "uninteresting"
rev-list-options.txt: correct TREESAME for P
t6111: add parents to tests
t6111: allow checking the parents as well
t6111: new TREESAME test set
t6019: test file dropped in -s ours merge
decorate.c: compact table when growing
|
|
Sometimes people would want to view the commits in parallel
histories in the order of author dates, not committer dates.
Teach "topo-order" sort machinery to do so, using a commit-info slab
to record the author dates of each commit, and prio-queue to sort
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The primary invariant of sort_in_topological_order() is that a
parent commit is not emitted until all children of it are. When
traversing a forked history like this with "git log C E":
A----B----C
\
D----E
we ensure that A is emitted after all of B, C, D, and E are done, B
has to wait until C is done, and D has to wait until E is done.
In some applications, however, we would further want to control how
these child commits B, C, D and E on two parallel ancestry chains
are shown.
Most of the time, we would want to see C and B emitted together, and
then E and D, and finally A (i.e. the --topo-order output). The
"lifo" parameter of the sort_in_topological_order() function is used
to control this behaviour. We start the traversal by knowing two
commits, C and E. While keeping in mind that we also need to
inspect E later, we pick C first to inspect, and we notice and
record that B needs to be inspected. By structuring the "work to be
done" set as a LIFO stack, we ensure that B is inspected next,
before other in-flight commits we had known that we will need to
inspect, e.g. E.
When showing in --date-order, we would want to see commits ordered
by timestamps, i.e. show C, E, B and D in this order before showing
A, possibly mixing commits from two parallel histories together.
When "lifo" parameter is set to false, the function keeps the "work
to be done" set sorted in the date order to realize this semantics.
After inspecting C, we add B to the "work to be done" set, but the
next commit we inspect from the set is E which is newer than B.
The name "lifo", however, is too strongly tied to the way how the
function implements its behaviour, and does not describe what the
behaviour _means_.
Replace this field with an enum rev_sort_order, with two possible
values: REV_SORT_IN_GRAPH_ORDER and REV_SORT_BY_COMMIT_DATE, and
update the existing code. The mechanical replacement rule is:
"lifo == 0" is equivalent to "sort_order == REV_SORT_BY_COMMIT_DATE"
"lifo == 1" is equivalent to "sort_order == REV_SORT_IN_GRAPH_ORDER"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many code paths will free a tree object's buffer and set it
to NULL after finishing with it in order to keep memory
usage down during a traversal. However, out of 8 sites that
do this, only one actually unsets the "parsed" flag back.
Those sites that don't are setting a trap for later users of
the tree object; even after calling parse_tree, the buffer
will remain NULL, causing potential segfaults.
It is not known whether this is triggerable in the current
code. Most commands do not do an in-memory traversal
followed by actually using the objects again. However, it
does not hurt to be safe for future callers.
In most cases, we can abstract this out to a
"free_tree_buffer" helper. However, there are two
exceptions:
1. The fsck code relies on the parsed flag to know that we
were able to parse the object at one point. We can
switch this to using a flag in the "flags" field.
2. The index-pack code sets the buffer to NULL but does
not free it (it is freed by a caller). We should still
unset the parsed flag here, but we cannot use our
helper, as we do not want to free the buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
|
|
Previously, the memory management of the object_array_entry::name
field was inconsistent and undocumented. object_array_entries are
ultimately created by a single function, add_object_array_with_mode(),
which has an argument "const char *name". This function used to
simply set the name field to reference the string pointed to by the
name parameter, and nobody on the object_array side ever freed the
memory. Thus, it assumed that the memory for the name field would be
managed by the caller, and that the lifetime of that string would be
at least as long as the lifetime of the object_array_entry. But
callers were inconsistent:
* Some passed pointers to constant strings or argv entries, which was
OK.
* Some passed pointers to newly-allocated memory, but didn't arrange
for the memory ever to be freed.
* Some passed the return value of sha1_to_hex(), which is a pointer to
a statically-allocated buffer that can be overwritten at any time.
* Some passed pointers to refnames that they received from a
for_each_ref()-type iteration, but the lifetimes of such refnames is
not guaranteed by the refs API.
Bring consistency to this mess by changing object_array to make its
own copy for the object_array_entry::name field and free this memory
when an object_array_entry is deleted from the array.
Many callers were passing the empty string as the name parameter, so
as a performance optimization, treat the empty string specially.
Instead of making a copy, store a pointer to a statically-allocated
empty string to object_array_entry::name. When deleting such an
entry, skip the free().
Change the callers that were already passing copies to
add_object_array_with_mode() to either skip the copy, or (if the
memory needed to be allocated anyway) freeing the memory itself.
A part of this commit effectively reverts
70d26c6e76 read_revisions_from_stdin: make copies for handle_revision_arg
because the copying introduced by that commit (which is still
necessary) is now done at a deeper level.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use object_array_filter(), which will soon be made smarter about
cleaning up discarded entries properly. Also add a function comment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of assuming that the memory pointed to by the name argument
will live forever, make a local copy of it before storing it in the
ref_cmdline_info.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, the default history treated bottom commits the same as any
other UNINTERESTING commit, which could force it down side branches.
Consider the following history:
*A--*B---D--*F * marks !TREESAME parent paths
\ /*
`-C-'
When requesting "B..F", B is UNINTERESTING but TREESAME to D. C is
!UNINTERESTING.
So default following would go from D into the irrelevant side branch C
to A, rather than to B. Note also that if there had been an extra
!UNINTERESTING commit B1 between B and D, it wouldn't have gone down C.
Change the default following to test relevant_commit() instead of
!UNINTERESTING, so it can proceed straight from D to B, thus finishing
the traversal of that path.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using --parents or --children, get_commit_action() previously showed
all merges, even if TREESAME to both parents.
This was intended to tie together the topology of the rewritten parents,
but it was excessive - in fact we only need to show merges that have two
or more relevant parents. Merges at the boundary do not necessarily need
to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the BOTTOM flag to define relevance for pruning. Relevant commits
are those that are !UNINTERESTING or BOTTOM, and this allows us to
identify irrelevant side branches (UNINTERESTING && !BOTTOM).
If a merge has relevant parents, and it is TREESAME to them, then do not
let irrelevant parents cause the merge to be treated as !TREESAME.
When considering simplification, don't always include all merges -
merges with exactly one relevant parent can be simplified, if TREESAME
according to the above rule.
These two changes greatly increase simplification in limited, pruned
revision lists.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When performing edge-based operations on the revision graph, it can be
useful to be able to identify the INTERESTING graph's connection(s) to
the bottom commit(s) specified by the user.
Conceptually when the user specifies "A..B" (== B ^A), they are asking
for the history from A to B. The first connection from A onto the
INTERESTING graph is part of that history, and should be considered. If
we consider only INTERESTING nodes and their connections, then we're
really only considering the history from A's immediate descendants to B.
This patch does not change behaviour, but adds a new BOTTOM flag to
indicate the bottom commits specified by the user, ready to be used by
following patches.
We immediately use the BOTTOM flag to return collect_bottom_commits() to
its original approach of examining the pending commit list rather than
the command line. This will ensure alignment of the definition of
"bottom" with future patches.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement commit 4b7f53da on top of the new simplify-merges
infrastructure, tightening the condition to only consider root parents;
the original version incorrectly dropped parents that were TREESAME to
anything.
Original log message follows.
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When simplifying an odd merge, such as one that used "-s ours", we may
find ourselves TREESAME to apparently redundant parents. Prevent
simplify_merges() from removing every TREESAME parent; if this would
happen reinstate the first TREESAME parent - the one that the default
log would have followed.
This avoids producing a totally disjoint history from the default log
when the default log is a better explanation of the end result, and aids
visualisation of odd merges.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
History simplification previously always treated merges as TREESAME
if they were TREESAME to any parent.
While this was consistent with the default behaviour, this could be
extremely unhelpful when searching detailed history, and could not be
overridden. For example, if a merge had ignored a change, as if by "-s
ours", then:
git log -m -p --full-history -Schange file
would successfully locate "change"'s addition but would not locate the
merge that resolved against it.
Futher, simplify_merges could drop the actual parent that a commit
was TREESAME to, leaving it as a normal commit marked TREESAME that
isn't actually TREESAME to its remaining parent.
Now redefine a commit's TREESAME flag to be true only if a commit is
TREESAME to _all_ of its parents. This doesn't affect either the default
simplify_history behaviour (because partially TREESAME merges are turned
into normal commits), or full-history with parent rewriting (because all
merges are output). But it does affect other modes. The clearest
difference is that --full-history will show more merges - sufficient to
ensure that -m -p --full-history log searches can really explain every
change to the file, including those changes' ultimate fate in merges.
Also modify simplify_merges to recalculate TREESAME after removing
a parent. This is achieved by storing per-parent TREESAME flags on the
initial scan, so the combined flag can be easily recomputed.
This fixes some t6111 failures, but creates a couple of new ones -
we are now showing some merges that don't need to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation assures users that "A...B" is defined as "A B --not
$(git merge-base --all A B)". This wasn't in fact quite true, because
the calculated merge bases were not sent to add_rev_cmdline().
The main effect of this was that although
git rev-list --ancestry-path A B --not $(git merge-base --all A B)
worked, the simpler form
git rev-list --ancestry-path A...B
failed with a "no bottom commits" error.
Other potential users of bottom commits could also be affected by this
problem, if they examine revs->cmdline_info; I came across the issue in
my proposed history traversal refinements series.
So ensure that the calculated merge bases are sent to add_rev_cmdline(),
flagged with new 'whence' enum value REV_CMD_MERGE_BASE.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
pretty-printing body of the commit that is stored in non UTF-8
encoding did not work well. The early part of this series fixes
it. And then it adds %C(auto) specifier that turns the coloring on
when we are emitting to the terminal, and adds column-aligning
format directives.
* nd/pretty-formats:
pretty: support %>> that steal trailing spaces
pretty: support truncating in %>, %< and %><
pretty: support padding placeholders, %< %> and %><
pretty: add %C(auto) for auto-coloring
pretty: split color parsing into a separate function
pretty: two phase conversion for non utf-8 commits
utf8.c: add reencode_string_len() that can handle NULs in string
utf8.c: add utf8_strnwidth() with the ability to skip ansi sequences
utf8.c: move display_mode_esc_sequence_len() for use by other functions
pretty: share code between format_decoration and show_decorations
pretty-formats.txt: wrap long lines
pretty: get the correct encoding for --pretty:format=%e
pretty: save commit encoding from logmsg_reencode if the caller needs it
|
|
A fix to a long-standing issue in the command line parser for
revisions, which was triggered by mv/sequence-pick-error-diag topic.
* tr/copy-revisions-from-stdin:
read_revisions_from_stdin: make copies for handle_revision_arg
|
|
The commit encoding is parsed by logmsg_reencode, there's no need for
the caller to re-parse it again. The reencoded message now has the new
encoding, not the original one. The caller would need to read commit
object again before parsing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_revisions_from_stdin() has passed pointers to its read buffer
down to handle_revision_arg() since its inception way back in 42cabc3
(Teach rev-list an option to read revs from the standard input.,
2006-09-05). Even back then, this was a bug: through
add_pending_object, the argument was recorded in the object_array's
'name' field.
Fix it by making a copy whenever read_revisions_from_stdin() passes an
argument down the callchain. The other caller runs handle_revision_arg()
on argv[], where it would be redundant to make a copy.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
branch, 2013-01-17)
Kevin Bracey reports that the change regresses a case shown in the
user manual.
Trading one fix with another breakage is not worth it. Just keep
the test to document the existing breakage, and revert the change
for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.8.1:
Start preparing for 1.8.1.6
git-tag(1): we tag HEAD by default
Fix revision walk for commits with the same dates
t2003: work around path mangling issue on Windows
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
entry: fix filter lookup
t2003: modernize style
name-hash.c: fix endless loop with core.ignorecase=true
|
|
* kk/revwalk-slop-too-many-commit-within-a-second:
Fix revision walk for commits with the same dates
|
|
Allow the revision "slop" code to look deeper while commits with
exactly the same timestamps come next to each other (which can
often happen after a large "am" and "rebase" session).
* kk/revwalk-slop-too-many-commit-within-a-second:
Fix revision walk for commits with the same dates
|
|
The --simplify-merges logic did not cull irrelevant parents from a
merge that is otherwise not interesting with respect to the paths
we are following.
This touches a fairly core part of the revision traversal
infrastructure; even though I think this change is correct, please
report immediately if you find any unintended side effect.
* jc/remove-treesame-parent-in-simplify-merges:
simplify-merges: drop merge from irrelevant side branch
|
|
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function rewrite_one is used to rewrite a single
parent of the current commit, and is used by rewrite_parents
to rewrite all the parents.
Decouple the dependence between them by making rewrite_one
a callback function that is passed to rewrite_parents. Then
export rewrite_parents for reuse by the line history browser.
We will use this function in line-log.c.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run "git log --grep=foo", we will run your regex on
the literal bytes of the commit message. This can provide
confusing results if the commit message is not in the same
encoding as your grep expression (or worse, you have commits
in multiple encodings, in which case your regex would need
to be written to match either encoding). On top of this, we
might also be grepping in the commit's notes, which are
already re-encoded, potentially leading to grepping in a
buffer with mixed encodings concatenated. This is insanity,
but most people never noticed, because their terminal and
their commit encodings all match.
Instead, let's massage the to-be-grepped commit into a
standardized encoding. There is not much point in adding a
flag for "this is the encoding I expect my grep pattern to
match"; the only sane choice is for it to use the log output
encoding. That is presumably what the user's terminal is
using, and it means that the patterns found by the grep will
match the output produced by git.
As a bonus, this fixes a potential segfault in commit_match
when commit->buffer is NULL, as we now build on logmsg_reencode,
which handles reading the commit buffer from disk if
necessary. The segfault can be triggered with:
git commit -m 'text1' --allow-empty
git commit -m 'text2' --allow-empty
git log --graph --no-walk --grep 'text2'
which arguably does not make any sense (--graph inherently
wants a connected history, and by --no-walk the command line
is telling us to show discrete points in history without
connectivity), and we probably should forbid the
combination, but that is a separate issue.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we taught the commit_match() mechanism to pay attention to the
new --use-mailmap option, we started to unconditionally copy the
commit object to a temporary buffer, just in case we need the author
and committer lines updated via the mailmap mechanism, and rewrite
author and committer using the mailmap.
It turns out that this has a rather unpleasant performance
implications. In the linux kernel repository, running
$ git log --author='Junio C Hamano' --pretty=short >/dev/null
under /usr/bin/time, with and without --use-mailmap (the .mailmap
file is 118 entries long, the particular author does not appear in
it), cost (with warm cache):
[without --use-mailmap]
5.42user 0.26system 0:05.70elapsed 99%CPU (0avgtext+0avgdata 2005936maxresident)k
0inputs+0outputs (0major+137669minor)pagefaults 0swaps
[with --use-mailmap]
6.47user 0.30system 0:06.78elapsed 99%CPU (0avgtext+0avgdata 2006288maxresident)k
0inputs+0outputs (0major+137692minor)pagefaults 0swaps
which incurs about 20% overhead. The command is doing extra work,
so the extra cost may be justified.
But it is inexcusable to pay the cost when we do not need
author/committer match. In the same repository,
$ git log --grep='fix menuconfig on debian lenny' --pretty=short >/dev/null
shows very similar numbers as the above:
[without --use-mailmap]
5.32user 0.30system 0:05.63elapsed 99%CPU (0avgtext+0avgdata 2005984maxresident)k
0inputs+0outputs (0major+137672minor)pagefaults 0swaps
[with --use-mailmap]
6.64user 0.24system 0:06.89elapsed 99%CPU (0avgtext+0avgdata 2006320maxresident)k
0inputs+0outputs (0major+137694minor)pagefaults 0swaps
The latter case is an unnecessary performance regression. We may
want to _show_ the result with mailmap applied, but we do not have
to copy and rewrite the author/committer of all commits we try to
match if we do not query for these fields.
Trivially optimize this performace regression by limiting the
rewrites for only when we are matching with author/committer fields.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently you can use mailmap to display log authors and committers
but you can't use the mailmap to find commits with mapped values.
This commit allows you to run:
git log --use-mailmap --author mapped_name_or_email
git log --use-mailmap --committer mapped_name_or_email
Of course it only works if the --use-mailmap option is used.
The new name and email are copied only when necessary.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Felipe Contreras
Junio C Hamano
Nguyễn Thái Ngọc Duy
Thomas Rast
Jeff King
Michael Haggerty
Kevin Bracey
Thomas Rast
Bo Yang
Kacper Kornet
Antoine Pelisse