| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When you do
git-rev-list --objects $(git-rev-parse HEAD^..HEAD)
it now lists not only the "commit difference" between the parent of HEAD
and HEAD itself (which is normally just the parent, but in the case of a
merge will be all the newly merged commits), but also all the new tree
and blob objects that weren't in the original.
NOTE! It doesn't walk all the way to the root, so it doesn't do a full
object search in the full old history. Instead, it will only look as
far back in the history as it needs to resolve the commits. Thus, if
the commit reverts a blob (or tree) back to a state much further back in
history, we may end up listing some blobs (or trees) as "new" even
though they exist further back.
Regardless, the list of objects will be a superset (usually exact) list
of objects needed to go from the beginning commit to ending commit.
As a particularly obvious special case,
git-rev-list --objects HEAD
will end up listing every single object that is reachable from the HEAD
commit.
Side note: the objects are sorted by "recency", with commits first.
|
|
This patch fixes a problem reported by Paul Mackerras regarding the interaction
of the --merge-order and --max-age switches of git-rev-list.
This patch applies to the current Linus HEAD. A cleaner fix for the same problem
in my current HEAD will follow later.
With this change, --merge-order produces the same result as no --merge-order
on the linux-2.6 git repository, to wit:
$> git-rev-list --max-age=1116330140 bcfff0b471a60df350338bcd727fc9b8a6aa54b2 | wc -l
655
$> git-rev-list --merge-order --max-age=1116330140 bcfff0b471a60df350338bcd727fc9b8a6aa54b2 | wc -l
655
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
output
If b is reachable from a, then:
git-rev-list a b
argument would print one of the commits twice.
This patch fixes that problem. A previous problem fixed it for the
--merge-order switch.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Strangely, this warning only shows up when not compiling with "-O2",
which is why I didn't see it originally.
|
|
This is useful for doing binary searching for problems. You start with
a known good and known bad point, and you then test the "halfway" point
in between:
git-rev-list --bisect bad ^good
and you test that. If that one tests good, you now still have a known
bad case, but two known good points, and you can bisect again:
git-rev-list --bisect bad ^good1 ^good2
and test that point. If that point is bad, you now use that as your
known-bad starting point:
git-rev-list --bisect newbad ^good1 ^good2
and basically at every iteration you shrink your list of commits by
half: you're binary searching for the point where the troubles started,
even though there isn't a nice linear ordering.
|
|
This patch tidies up the git-rev-list documentation and epoch.c, which
are in severe clash with the unwritten coding style now, and quite
unreadable.
It also fixes up compile failures with older compilers due to variable
declarations after code.
The patch mostly wraps lines before or on the 80th column, removes
plenty of superfluous empty lines and changes comments from // to /* */.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch linearises the GIT commit history graph into merge order
which is defined by invariants specified in Documentation/git-rev-list.txt.
The linearisation produced by this patch is superior in an objective sense
to that produced by the existing git-rev-list implementation in that
the linearisation produced is guaranteed to have the minimum number of
discontinuities, where a discontinuity is defined as an adjacent pair of
commits in the output list which are not related in a direct child-parent
relationship.
With this patch a graph like this:
a4 ---
| \ \
| b4 |
|/ | |
a3 | |
| | |
a2 | |
| | c3
| | |
| | c2
| b3 |
| | /|
| b2 |
| | c1
| | /
| b1
a1 |
| |
a0 |
| /
root
Sorts like this:
= a4
| c3
| c2
| c1
^ b4
| b3
| b2
| b1
^ a3
| a2
| a1
| a0
= root
Instead of this:
= a4
| c3
^ b4
| a3
^ c2
^ b3
^ a2
^ b2
^ c1
^ a1
^ b1
^ a0
= root
A test script, t/t6000-rev-list.sh, includes a test which demonstrates
that the linearisation produced by --merge-order has less discontinuities
than the linearisation produced by git-rev-list without the --merge-order
flag specified. To see this, do the following:
cd t
./t6000-rev-list.sh
cd trash
cat actual-default-order
cat actual-merge-order
The existing behaviour of git-rev-list is preserved, by default. To obtain
the modified behaviour, specify --merge-order or --merge-order --show-breaks
on the command line.
This version of the patch has been tested on the git repository and also on the linux-2.6
repository and has reasonable performance on both - ~50-100% slower than the original algorithm.
This version of the patch has incorporated a functional equivalent of the Linus' output limiting
algorithm into the merge-order algorithm itself. This operates per the notes associated
with Linus' commit 337cb3fb8da45f10fe9a0c3cf571600f55ead2ce.
This version has incorporated Linus' feedback regarding proposed changes to rev-list.c.
(see: [PATCH] Factor out filtering in rev-list.c)
This version has improved the way sort_first_epoch marks commits as uninteresting.
For more details about this change, refer to Documentation/git-rev-list.txt
and http://blackcubes.dyndns.org/epoch/.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
You can ask to print out "raw" format (full headers, full body),
"medium" format (author and date, full body) or "short" format
(author only, condensed body).
Use "git-rev-list --pretty=short HEAD | less -S" for an example.
|
|
This makes git-rev-list use the same command line syntax to mark the
commits as git-rev-tree does, and instead of just allowing a start and
end commit, it allows an arbitrary list of "interesting" and "uninteresting"
commits.
For example, imagine that you had three branches (a, b and c) that you
are interested in, but you don't want to see stuff that already exists
in another persons three releases (x, y and z). You can do
git-rev-list a b c ^x ^y ^z
(order doesn't matter, btw - feel free to put the uninteresting ones
first or otherwise swithc them around), and it will show all the
commits that are reachable from a/b/c but not reachable from x/y/z.
The old syntax "git-rev-list start end" would not be written as
"git-rev-list start ^end", or "git-rev-list ^end start".
There's no limit to the number of heads you can specify (unlike
git-rev-tree, which can handle a maximum of 16 heads).
|
|
Ok, now I'm happier.
|
|
Functions that do many things are bad. We should basically
just parse the arguments in main(). We're not quite there
yet, but it's a step in the right direction.
|
|
That pretty-prints the resulting commit messages, so
git-rev-list --pretty HEAD v2.6.12-rc5 | less -S
basically ends up being a log of the changes between -rc5
and current head.
It uses the pretty-printing helper function I just extracted
from diff-tree.c.
|
|
It makes rev-list show the list of parents, the same
way git-rev-tree does (but without the expense).
|
|
This mean sthat you can give a beginning/end pair to git-rev-list,
and it will show all entries that are reachable from the beginning
but not the end.
For example
git-rev-list v2.6.12-rc5 v2.6.12-rc4
shows all commits that are in -rc5 but are not in -rc4.
|
|
The "end" commit is just faking it right now, it's sorting things
purely by date, so this is _not_ a reachability analysis. Some day.
The "--header" flag causes the commit message to be printed out,
with a NUL character separator after it for parseability. This
allows you to do things like use "grep -z" to grep for certain
authors etc.
|
|
Fixes all in-code names that leaved during "big name change".
Signed-off-by: Alexey Nezhdanov <snake@penza-gsm.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
gitweb.cgi's default view is the log of the last day and git-rev-list
can stop crawling the whole repo if we have all our data to display in the
browser. Also the rss-feed query needs only the last 20 items. This
will speeds up these queries dramatically.
usage: rev-list [OPTION] commit-id
--max-count=nr
--max-age=epoch
--min-age=epoch
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This allows the programs to use various simplified versions of
the SHA1 names, eg just say "HEAD" for the SHA1 pointed to by
the .git/HEAD file etc.
For example, this commit has been done with
git-commit-tree $(git-write-tree) -p HEAD
instead of the traditional "$(cat .git/HEAD)" syntax.
|
|
Make pop_most_recent_commit() return the same objects multiple times, but only
if called with different bits to mark.
This is necessary to make merge-base work again.
Signed-Off-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This is probably what you'd want to see for "git log".
|
Linus Torvalds
Jon Seymour
Petr Baudis
jon@blackcubes.dyndns.org
Alexey Nezhdanov
Kay Sievers
Daniel Barkalow