summaryrefslogtreecommitdiff
path: root/remote.h
AgeCommit message (Collapse)AuthorFilesLines
2020-10-27Merge branch 'sk/force-if-includes'Libravatar Junio C Hamano1-1/+11
"git push --force-with-lease[=<ref>]" can easily be misused to lose commits unless the user takes good care of their own "git fetch". A new option "--force-if-includes" attempts to ensure that what is being force-pushed was created after examining the commit at the tip of the remote ref that is about to be force-replaced. * sk/force-if-includes: t, doc: update tests, reference for "--force-if-includes" push: parse and set flag for "--force-if-includes" push: add reflog check for "--force-if-includes"
2020-10-05Merge branch 'jk/refspecs-negative'Libravatar Junio C Hamano1-1/+8
"git fetch" and "git push" support negative refspecs. * jk/refspecs-negative: refspec: add support for negative refspecs
2020-10-03push: add reflog check for "--force-if-includes"Libravatar Srinidhi Kaushik1-1/+11
Add a check to verify if the remote-tracking ref of the local branch is reachable from one of its "reflog" entries. The check iterates through the local ref's reflog to see if there is an entry for the remote-tracking ref and collecting any commits that are seen, into a list; the iteration stops if an entry in the reflog matches the remote ref or if the entry timestamp is older the latest entry of the remote ref's "reflog". If there wasn't an entry found for the remote ref, "in_merge_bases_many()" is called to check if it is reachable from the list of collected commits. When a local branch that is based on a remote ref, has been rewound and is to be force pushed on the remote, "--force-if-includes" runs a check that ensures any updates to the remote-tracking ref that may have happened (by push from another repository) in-between the time of the last update to the local branch (via "git-pull", for instance) and right before the time of push, have been integrated locally before allowing a forced update. If the new option is passed without specifying "--force-with-lease", or specified along with "--force-with-lease=<refname>:<expect>" it is a "no-op". Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-30refspec: add support for negative refspecsLibravatar Jacob Keller1-1/+8
Both fetch and push support pattern refspecs which allow fetching or pushing references that match a specific pattern. Because these patterns are globs, they have somewhat limited ability to express more complex situations. For example, suppose you wish to fetch all branches from a remote except for a specific one. To allow this, you must setup a set of refspecs which match only the branches you want. Because refspecs are either explicit name matches, or simple globs, many patterns cannot be expressed. Add support for a new type of refspec, referred to as "negative" refspecs. These are prefixed with a '^' and mean "exclude any ref matching this refspec". They can only have one "side" which always refers to the source. During a fetch, this refers to the name of the ref on the remote. During a push, this refers to the name of the ref on the local side. With negative refspecs, users can express more complex patterns. For example: git fetch origin refs/heads/*:refs/remotes/origin/* ^refs/heads/dontwant will fetch all branches on origin into remotes/origin, but will exclude fetching the branch named dontwant. Refspecs today are commutative, meaning that order doesn't expressly matter. Rather than forcing an implied order, negative refspecs will always be applied last. That is, in order to match, a ref must match at least one positive refspec, and match none of the negative refspecs. This is similar to how negative pathspecs work. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-25Merge branch 'jx/proc-receive-hook'Libravatar Junio C Hamano1-0/+9
"git receive-pack" that accepts requests by "git push" learned to outsource most of the ref updates to the new "proc-receive" hook. * jx/proc-receive-hook: doc: add documentation for the proc-receive hook transport: parse report options for tracking refs t5411: test updates of remote-tracking branches receive-pack: new config receive.procReceiveRefs doc: add document for capability report-status-v2 New capability "report-status-v2" for git-push receive-pack: feed report options to post-receive receive-pack: add new proc-receive hook t5411: add basic test cases for proc-receive hook transport: not report a non-head push as a branch
2020-08-27New capability "report-status-v2" for git-pushLibravatar Jiang Xin1-0/+1
The new introduced "proc-receive" hook may handle a command for a pseudo-reference with a zero-old as its old-oid, while the hook may create or update a reference with different name, different new-oid, and different old-oid (the reference may exist already with a non-zero old-oid). Current "report-status" protocol cannot report the status for such reference rewrite. Add new capability "report-status-v2" and new report protocol which is not backward compatible for report of git-push. If a user pushes to a pseudo-reference "refs/for/master/topic", and "receive-pack" creates two new references "refs/changes/23/123/1" and "refs/changes/24/124/1", for client without the knowledge of "report-status-v2", "receive-pack" will only send "ok/ng" directives in the report, such as: ok ref/for/master/topic But for client which has the knowledge of "report-status-v2", "receive-pack" will use "option" directives to report more attributes for the reference given by the above "ok/ng" directive. ok refs/for/master/topic option refname refs/changes/23/123/1 option new-oid <new-oid> ok refs/for/master/topic option refname refs/changes/24/124/1 option new-oid <new-oid> The client will report two new created references to the end user. Suggested-by: Junio C Hamano <gitster@pobox.com> Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-27receive-pack: add new proc-receive hookLibravatar Jiang Xin1-0/+8
Git calls an internal `execute_commands` function to handle commands sent from client to `git-receive-pack`. Regardless of what references the user pushes, git creates or updates the corresponding references if the user has write-permission. A contributor who has no write-permission, cannot push to the repository directly. So, the contributor has to write commits to an alternate location, and sends pull request by emails or by other ways. We call this workflow as a distributed workflow. It would be more convenient to work in a centralized workflow like what Gerrit provided for some cases. For example, a read-only user who cannot push to a branch directly can run the following `git push` command to push commits to a pseudo reference (has a prefix "refs/for/", not "refs/heads/") to create a code review. git push origin \ HEAD:refs/for/<branch-name>/<session> The `<branch-name>` in the above example can be as simple as "master", or a more complicated branch name like "foo/bar". The `<session>` in the above example command can be the local branch name of the client side, such as "my/topic". We cannot implement a centralized workflow elegantly by using "pre-receive" + "post-receive", because Git will call the internal function "execute_commands" to create references (even the special pseudo reference) between these two hooks. Even though we can delete the temporarily created pseudo reference via the "post-receive" hook, having a temporary reference is not safe for concurrent pushes. So, add a filter and a new handler to support this kind of workflow. The filter will check the prefix of the reference name, and if the command has a special reference name, the filter will turn a specific field (`run_proc_receive`) on for the command. Commands with this filed turned on will be executed by a new handler (a hook named "proc-receive") instead of the internal `execute_commands` function. We can use this "proc-receive" command to create pull requests or send emails for code review. Suggested by Junio, this "proc-receive" hook reads the commands, push-options (optional), and send result using a protocol in pkt-line format. In the following example, the letter "S" stands for "receive-pack" and letter "H" stands for the hook. # Version and features negotiation. S: PKT-LINE(version=1\0push-options atomic...) S: flush-pkt H: PKT-LINE(version=1\0push-options...) H: flush-pkt # Send commands from server to the hook. S: PKT-LINE(<old-oid> <new-oid> <ref>) S: ... ... S: flush-pkt # Send push-options only if the 'push-options' feature is enabled. S: PKT-LINE(push-option) S: ... ... S: flush-pkt # Receive result from the hook. # OK, run this command successfully. H: PKT-LINE(ok <ref>) # NO, I reject it. H: PKT-LINE(ng <ref> <reason>) # Fall through, let 'receive-pack' to execute it. H: PKT-LINE(ok <ref>) H: PKT-LINE(option fall-through) # OK, but has an alternate reference. The alternate reference name # and other status can be given in options H: PKT-LINE(ok <ref>) H: PKT-LINE(option refname <refname>) H: PKT-LINE(option old-oid <old-oid>) H: PKT-LINE(option new-oid <new-oid>) H: PKT-LINE(option forced-update) H: ... ... H: flush-pkt After receiving a command, the hook will execute the command, and may create/update different reference. For example, a command for a pseudo reference "refs/for/master/topic" may create/update different reference such as "refs/pull/123/head". The alternate reference name and other status are given in option lines. The list of commands returned from "proc-receive" will replace the relevant commands that are sent from user to "receive-pack", and "receive-pack" will continue to run the "execute_commands" function and other routines. Finally, the result of the execution of these commands will be reported to end user. The reporting function from "receive-pack" to "send-pack" will be extended in latter commit just like what the "proc-receive" hook reports to "receive-pack". Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-28argv-array: rename to strvecLibravatar Jeff King1-2/+2
The name "argv-array" isn't very good, because it describes what the data type can be used for (program argument arrays), not what it actually is (a dynamically-growing string array that maintains a NULL-terminator invariant). This leads to people being hesitant to use it for other cases where it would actually be a good fit. The existing name is also clunky to use. It's overly long, and the name often leads to saying things like "argv.argv" (i.e., the field names overlap with variable names, since they're describing the use, not the type). Let's give it a more neutral name. I settled on "strvec" because "vector" is the name for a dynamic array type in many programming languages. "strarray" would work, too, but it's longer and a bit more awkward to say (and don't we all say these things in our mind as we type them?). A more extreme direction would be a generic data structure which stores a NULL-terminated of _any_ type. That would be easy to do with void pointers, but we'd lose some type safety for the existing cases. Plus it raises questions about memory allocation and ownership. So I limited myself here to changing names only, and not semantics. If we do find a use for that more generic data type, we could perhaps implement it at a lower level and then provide type-safe wrappers around it for strings. But that can come later. This patch does the minimum to convert the struct and function names in the header and implementation, leaving a few things for follow-on patches: - files retain their original names for now - struct field names are retained for now - there's a preprocessor compat layer that lets most users remain the same for now. The exception is headers which made a manual forward declaration of the struct. I've converted them (and their dependent function declarations) here. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-24stateless-connect: send response end packetLibravatar Denton Liu1-1/+2
Currently, remote-curl acts as a proxy and blindly forwards packets between an HTTP server and fetch-pack. In the case of a stateless RPC connection where the connection is terminated before the transaction is complete, remote-curl will blindly forward the packets before waiting on more input from fetch-pack. Meanwhile, fetch-pack will read the transaction and continue reading, expecting more input to continue the transaction. This results in a deadlock between the two processes. This can be seen in the following command which does not terminate: $ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012 Cloning into 'git'... whereas the v1 version does terminate as expected: $ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012 Cloning into 'git'... fatal: the remote end hung up unexpectedly Instead of blindly forwarding packets, make remote-curl insert a response end packet after proxying the responses from the remote server when using stateless_connect(). On the RPC client side, ensure that each response ends as described. A separate control packet is chosen because we need to be able to differentiate between what the remote server sends and remote-curl's control packets. By ensuring in the remote-curl code that a server cannot send response end packets, we prevent a malicious server from being able to perform a denial of service attack in which they spoof a response end packet and cause the described deadlock to happen. Reported-by: Force Charlie <charlieio@outlook.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-03remote: drop "explicit" parameter from remote_ref_for_branch()Libravatar Jeff King1-2/+1
Commit 9700fae5ee (for-each-ref: let upstream/push report the remote ref name, 2017-11-07) added a remote_ref_for_branch() helper, which is modeled after remote_for_branch(). This includes providing an "explicit" out-parameter that tells the caller whether the remote was configured by the user, or whether we picked a default name like "origin". But unlike remote names, there is no default name when the user didn't configure one. The only way the "explicit" parameter is used by the caller is to use the value returned from the helper when it is set, and use an empty string otherwise, ignoring the returned value from the helper. Let's drop the "explicit" out-parameter, and return NULL when the returned value from the helper should be ignored, to simplify the function interface. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-18remote: move doc to remote.h and refspec.hLibravatar Heba Waly1-3/+54
Move the documentation from Documentation/technical/api-remote.txt to remote.h and refspec.h as it's easier for the developers to find the usage information beside the code instead of looking for it in another doc file. N.B. The doc for both push and fetch members of the remote struct aren't moved because they are out of date, as the members were changed from arrays of rspecs to struct refspec 2 years ago. Also documentation/technical/api-remote.txt is removed because the information it has is now redundant and it'll be hard to keep it up to date and synchronized with the documentation in the header file. Signed-off-by: Heba Waly <heba.waly@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_entry: remove first member requirement from docsLibravatar Eric Wong1-1/+1
Comments stating that "struct hashmap_entry" must be the first member in a struct are no longer valid. Suggested-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-13Merge branch 'dl/no-extern-in-func-decl'Libravatar Junio C Hamano1-12/+12
Mechanically and systematically drop "extern" from function declarlation. * dl/no-extern-in-func-decl: *.[ch]: manually align parameter lists *.[ch]: remove extern from function declarations using sed *.[ch]: remove extern from function declarations using spatch
2019-05-09Merge branch 'dr/ref-filter-push-track-fix'Libravatar Junio C Hamano1-1/+2
%(push:track) token used in the --format option to "git for-each-ref" and friends was not showing the right branch, which has been fixed. * dr/ref-filter-push-track-fix: ref-filter: use correct branch for %(push:track)
2019-05-05*.[ch]: manually align parameter listsLibravatar Denton Liu1-6/+6
In previous patches, extern was mechanically removed from function declarations without care to formatting, causing parameter lists to be misaligned. Manually format changed sections such that the parameter lists should be realigned. Viewing this patch with 'git diff -w' should produce no output. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-05*.[ch]: remove extern from function declarations using spatchLibravatar Denton Liu1-6/+6
There has been a push to remove extern from function declarations. Remove some instances of "extern" for function declarations which are caught by Coccinelle. Note that Coccinelle has some difficulty with processing functions with `__attribute__` or varargs so some `extern` declarations are left behind to be dealt with in a future patch. This was the Coccinelle patch used: @@ type T; identifier f; @@ - extern T f(...); and it was run with: $ git ls-files \*.{c,h} | grep -v ^compat/ | xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place Files under `compat/` are intentionally excluded as some are directly copied from external sources and we should avoid churning them as much as possible. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-18ref-filter: use correct branch for %(push:track)Libravatar Damien Robert1-1/+2
In ref-filter.c, when processing the atom %(push:track), the ahead/behind values are computed using `stat_tracking_info` which refers to the upstream branch. Fix that by introducing a new flag `for_push` in `stat_tracking_info` in remote.c, which does the same thing but for the push branch. Update the few callers of `stat_tracking_info` to handle this flag. This ensure that whenever we use this function in the future, we are careful to specify is this should apply to the upstream or the push branch. This bug was not detected in t/t6300-for-each-ref.sh because in the test for push:track, both the upstream and the push branches were behind by 1 from the local branch. Change the test so that the upstream branch is behind by 1 while the push branch is ahead by 1. This allows us to test that %(push:track) refers to the correct branch. This changes the expected value of some following tests (by introducing new references), so update them too. Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-15remote.c: make singular free_ref() publicLibravatar Jeff King1-1/+3
We provide a free_refs() function to free a list, but there's no easy way for a caller to free a single ref. Let's make our singular free_ref() function public. Since its name is so similar to the list-freeing free_refs(), and because both of those functions have the same signature, it might be easy to accidentally use the wrong one. Let's call the singular version the more verbose "free_one_ref()" to distinguish it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17Merge branch 'ds/reachable'Libravatar Junio C Hamano1-1/+0
The code for computing history reachability has been shuffled, obtained a bunch of new tests to cover them, and then being improved. * ds/reachable: commit-reach: correct accidental #include of C file commit-reach: use can_all_from_reach commit-reach: make can_all_from_reach... linear commit-reach: replace ref_newer logic test-reach: test commit_contains test-reach: test can_all_from_reach_with_flags test-reach: test reduce_heads test-reach: test get_merge_bases_many test-reach: test is_descendant_of test-reach: test in_merge_bases test-reach: create new test tool for ref_newer commit-reach: move can_all_from_reach_with_flags upload-pack: generalize commit date cutoff upload-pack: refactor ok_to_give_up() upload-pack: make reachable() more generic commit-reach: move commit_contains from ref-filter commit-reach: move ref_newer from remote.c commit.h: remove method declarations commit-reach: move walk methods from commit.c
2018-08-15Add missing includes and forward declarationsLibravatar Elijah Newren1-0/+1
I looped over the toplevel header files, creating a temporary two-line C program for each consisting of #include "git-compat-util.h" #include $HEADER This patch is the result of manually fixing errors in compiling those tiny programs. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20commit-reach: move ref_newer from remote.cLibravatar Derrick Stolee1-1/+0
There are several commit walks in the codebase. Group them together into a new commit-reach.c file and corresponding header. After we group these walks into one place, we can reduce duplicate logic by calling equivalent methods. The ref_newer() method is used by 'git push -f' to check if a force-push is necessary. By making the method public, we make it possible to test the method directly without setting up an envieronment where a 'git push' call makes sense. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-28fetch-pack: implement ref-in-wantLibravatar Brandon Williams1-0/+1
Implement ref-in-want on the client side so that when a server supports the "ref-in-want" feature, a client will send "want-ref" lines for each reference the client wants to fetch. This feature allows clients to tolerate inconsistencies that exist when a remote repository's refs change during the course of negotiation. This allows a client to request to request a particular ref without specifying the OID of the ref. This means that instead of hitting an error when a ref no longer points at the OID it did at the beginning of negotiation, negotiation can continue and the value of that ref will be sent at the termination of negotiation, just before a packfile is sent. More information on the ref-in-want feature can be found in Documentation/technical/protocol-v2.txt. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-30Merge branch 'bw/ref-prefix-for-configured-refspec'Libravatar Junio C Hamano1-39/+11
"git fetch $there $refspec" that talks over protocol v2 can take advantage of server-side ref filtering; the code has been extended so that this mechanism triggers also when fetching with configured refspec. * bw/ref-prefix-for-configured-refspec: (38 commits) fetch: generate ref-prefixes when using a configured refspec refspec: consolidate ref-prefix generation logic submodule: convert push_unpushed_submodules to take a struct refspec remote: convert check_push_refs to take a struct refspec remote: convert match_push_refs to take a struct refspec http-push: store refspecs in a struct refspec transport: remove transport_verify_remote_names send-pack: store refspecs in a struct refspec transport: convert transport_push to take a struct refspec push: convert to use struct refspec push: check for errors earlier remote: convert match_explicit_refs to take a struct refspec remote: convert get_ref_match to take a struct refspec remote: convert query_refspecs to take a struct refspec remote: convert apply_refspecs to take a struct refspec remote: convert get_stale_heads to take a struct refspec fetch: convert prune_refs to take a struct refspec fetch: convert get_ref_map to take a struct refspec fetch: convert do_fetch to take a struct refspec refspec: remove the deprecated functions ...
2018-05-18remote: convert check_push_refs to take a struct refspecLibravatar Brandon Williams1-1/+1
Convert 'check_push_refs()' to take a 'struct refspec' as a parameter instead of an array of 'const char *'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18remote: convert match_push_refs to take a struct refspecLibravatar Brandon Williams1-1/+1
Convert 'match_push_refs()' to take a 'struct refspec' as a parameter instead of an array of 'const char *'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18remote: convert query_refspecs to take a struct refspecLibravatar Brandon Williams1-1/+1
Convert 'query_refspecs()' to take a 'struct refspec' as a parameter instead of a list of 'struct refspec_item'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18remote: convert apply_refspecs to take a struct refspecLibravatar Brandon Williams1-2/+1
Convert 'apply_refspecs()' to take a 'struct refspec' as a parameter instead of a list of 'struct refspec_item'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18remote: convert get_stale_heads to take a struct refspecLibravatar Brandon Williams1-1/+1
Convert 'get_stale_heads()' to take a 'struct refspec' as a parameter instead of a list of 'struct refspec_item'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18remote: remove add_prune_tags_to_fetch_refspecLibravatar Brandon Williams1-2/+0
Remove 'add_prune_tags_to_fetch_refspec()' function and instead have the only caller directly add the tag refspec using 'refspec_append()'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18remote: convert fetch refspecs to struct refspecLibravatar Brandon Williams1-4/+1
Convert the set of fetch refspecs stored in 'struct remote' to use 'struct refspec'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18remote: convert push refspecs to struct refspecLibravatar Brandon Williams1-4/+2
Convert the set of push refspecs stored in 'struct remote' to use 'struct refspec'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18refspec: rename struct refspec to struct refspec_itemLibravatar Brandon Williams1-8/+8
In preparation for introducing an abstraction around a collection of refspecs (much like how a 'struct pathspec' is a collection of 'struct pathspec_item's) rename the existing 'struct refspec' to 'struct refspec_item'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18refspec: move refspec parsing logic into its own fileLibravatar Brandon Williams1-20/+0
In preparation for performing a refactor on refspec related code, move the refspec parsing logic into its own file. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-08Merge branch 'bw/protocol-v2'Libravatar Junio C Hamano1-2/+9
The beginning of the next-gen transfer protocol. * bw/protocol-v2: (35 commits) remote-curl: don't request v2 when pushing remote-curl: implement stateless-connect command http: eliminate "# service" line when using protocol v2 http: don't always add Git-Protocol header http: allow providing extra headers for http requests remote-curl: store the protocol version the server responded with remote-curl: create copy of the service name pkt-line: add packet_buf_write_len function transport-helper: introduce stateless-connect transport-helper: refactor process_connect_service transport-helper: remove name parameter connect: don't request v2 when pushing connect: refactor git_connect to only get the protocol version once fetch-pack: support shallow requests fetch-pack: perform a fetch using v2 upload-pack: introduce fetch server command push: pass ref prefixes when pushing fetch: pass ref prefixes when fetching ls-remote: pass ref prefixes when requesting a remote's refs transport: convert transport_get_remote_refs to take a list of ref prefixes ...
2018-04-24ls-remote: send server options when using protocol v2Libravatar Brandon Williams1-1/+3
Teach ls-remote to optionally accept server options by specifying them on the cmdline via '-o' or '--server-option'. These server options are sent to the remote end when querying for the remote end's refs using protocol version 2. If communicating using a protocol other than v2 the provided options are ignored and not sent to the remote end. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-24Merge branch 'bw/protocol-v2' into HEADLibravatar Junio C Hamano1-2/+9
* bw/protocol-v2: (35 commits) remote-curl: don't request v2 when pushing remote-curl: implement stateless-connect command http: eliminate "# service" line when using protocol v2 http: don't always add Git-Protocol header http: allow providing extra headers for http requests remote-curl: store the protocol version the server responded with remote-curl: create copy of the service name pkt-line: add packet_buf_write_len function transport-helper: introduce stateless-connect transport-helper: refactor process_connect_service transport-helper: remove name parameter connect: don't request v2 when pushing connect: refactor git_connect to only get the protocol version once fetch-pack: support shallow requests fetch-pack: perform a fetch using v2 upload-pack: introduce fetch server command push: pass ref prefixes when pushing fetch: pass ref prefixes when fetching ls-remote: pass ref prefixes when requesting a remote's refs transport: convert transport_get_remote_refs to take a list of ref prefixes ...
2018-03-15connect: request remote refs using v2Libravatar Brandon Williams1-0/+6
Teach the client to be able to request a remote's refs using protocol v2. This is done by having a client issue a 'ls-refs' request to a v2 server. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14connect: discover protocol version outside of get_remote_headsLibravatar Brandon Williams1-2/+3
In order to prepare for the addition of protocol_v2 push the protocol version discovery outside of 'get_remote_heads()'. This will allow for keeping the logic for processing the reference advertisement for protocol_v1 and protocol_v0 separate from the logic for protocol_v2. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-08Merge branch 'jh/status-no-ahead-behind'Libravatar Junio C Hamano1-2/+10
"git status" can spend a lot of cycles to compute the relation between the current branch and its upstream, which can now be disabled with "--no-ahead-behind" option. * jh/status-no-ahead-behind: status: support --no-ahead-behind in long format status: update short status to respect --no-ahead-behind status: add --[no-]ahead-behind to status and commit for V2 format. stat_tracking_info: return +1 when branches not equal
2018-02-09fetch: add a --prune-tags option and fetch.pruneTags configLibravatar Ævar Arnfjörð Bjarmason1-0/+3
Add a --prune-tags option to git-fetch, along with fetch.pruneTags config option and a -P shorthand (-p is --prune). This allows for doing any of: git fetch -p -P git fetch --prune --prune-tags git fetch -p -P origin git fetch --prune --prune-tags origin Or simply: git config fetch.prune true && git config fetch.pruneTags true && git fetch Instead of the much more verbose: git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*' Before this feature it was painful to support the use-case of pulling from a repo which is having both its branches *and* tags deleted regularly, and have our local references to reflect upstream. At work we create deployment tags in the repo for each rollout, and there's *lots* of those, so they're archived within weeks for performance reasons. Without this change it's hard to centrally configure such repos in /etc/gitconfig (on servers that are only used for working with them). You need to set fetch.prune=true globally, and then for each repo: git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$" Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well, and users running "git pull" will automatically get the pruning semantics I want. Even though "git remote" has corresponding "prune" and "update --prune" subcommands I'm intentionally not adding a corresponding prune-tags or "update --prune --prune-tags" mode to that command. It's advertised (as noted in my recent "git remote doc: correct dangerous lies about what prune does") as only modifying remote tracking references, whereas any --prune-tags option is always going to modify what from the user's perspective is a local copy of the tag, since there's no such thing as a remote tracking tag. Ideally add_prune_tags_to_fetch_refspec() would be something that would use ALLOC_GROW() to grow the 'fetch` member of the 'remote' struct. Instead I'm realloc-ing remote->fetch and adding the tag_refspec to the end. The reason is that parse_{fetch,push}_refspec which allocate the refspec (ultimately remote->fetch) struct are called many places that don't have access to a 'remote' struct. It would be hard to change all their callsites to be amenable to carry around the bookkeeping variables required for dynamic allocation. All the other callers of the API first incrementally construct the string version of the refspec in remote->fetch_refspec via add_fetch_refspec(), before finally calling parse_fetch_refspec() via some variation of remote_get(). It's less of a pain to deal with the one special case that needs to modify already constructed refspecs than to chase down and change all the other callsites. The API I'm adding is intentionally not generalized because if we add more of these we'd probably want to re-visit how this is done. See my "Re: [BUG] git remote prune removes local tags, depending on fetch config" (87po6ahx87.fsf@evledraar.gmail.com; https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for more background info. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-09remote: add a macro for "refs/tags/*:refs/tags/*"Libravatar Ævar Arnfjörð Bjarmason1-0/+2
Add a macro with the refspec string "refs/tags/*:refs/tags/*". There's been a pre-defined struct version of this since e0aaa29ff3 ("Have a constant extern refspec for "--tags"", 2008-04-17), but nothing that could be passed to e.g. add_fetch_refspec(). This will be used in subsequent commits to avoid hardcoding this string in multiple places. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-24status: support --no-ahead-behind in long formatLibravatar Jeff Hostetler1-1/+2
Teach long (normal) status format to respect the --no-ahead-behind parameter and skip the possibly expensive ahead/behind computation between the branch and the upstream. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-24status: add --[no-]ahead-behind to status and commit for V2 format.Libravatar Jeff Hostetler1-2/+3
Teach "git status" and "git commit" to accept "--no-ahead-behind" and "--ahead-behind" arguments to request quick or full ahead/behind reporting. When "--no-ahead-behind" is given, the existing porcelain V2 line "branch.ab +x -y" is replaced with a new "branch.ab +? -?" line. This indicates that the branch and its upstream are or are not equal without the expense of computing the full ahead/behind values. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-24stat_tracking_info: return +1 when branches not equalLibravatar Jeff Hostetler1-1/+7
Extend stat_tracking_info() to return +1 when branches are not equal and to take a new "enum ahead_behind_flags" argument to allow skipping the (possibly expensive) ahead/behind computation. This will be used in the next commit to allow "git status" to avoid full ahead/behind calculations for performance reasons. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-08for-each-ref: let upstream/push report the remote ref nameLibravatar J Wyman1-0/+2
There are times when scripts want to know not only the name of the push branch on the remote, but also the name of the branch as known by the remote repository. An example of this is when a tool wants to push to the very same branch from which it would pull automatically, i.e. the `<remote>` and the `<to>` in `git push <remote> <from>:<to>` would be provided by `%(upstream:remotename)` and `%(upstream:remoteref)`, respectively. This patch offers the new suffix :remoteref for the `upstream` and `push` atoms, allowing to show exactly that. Example: $ cat .git/config ... [remote "origin"] url = https://where.do.we.come/from fetch = refs/heads/*:refs/remote/origin/* [branch "master"] remote = origin merge = refs/heads/master [branch "develop/with/topics"] remote = origin merge = refs/heads/develop/with/topics ... $ git for-each-ref \ --format='%(push) %(push:remoteref)' \ refs/heads refs/remotes/origin/master refs/heads/master refs/remotes/origin/develop/with/topics refs/heads/develop/with/topics Signed-off-by: J Wyman <jwyman@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-17remote: convert struct push_cas to struct object_idLibravatar brian m. carlson1-1/+1
This gets rid of one use of get_sha1. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-19Merge branch 'bw/push-options-recursively-to-submodules'Libravatar Junio C Hamano1-0/+1
"git push --recurse-submodules --push-option=<string>" learned to propagate the push option recursively down to pushes in submodules. * bw/push-options-recursively-to-submodules: push: propagate remote and refspec with --recurse-submodules submodule--helper: add push-check subcommand remote: expose parse_push_refspec function push: propagate push-options with --recurse-submodules push: unmark a local variable as static
2017-04-19Merge branch 'bc/object-id'Libravatar Junio C Hamano1-3/+3
Conversion from unsigned char [40] to struct object_id continues. * bc/object-id: Documentation: update and rename api-sha1-array.txt Rename sha1_array to oid_array Convert sha1_array_for_each_unique and for_each_abbrev to object_id Convert sha1_array_lookup to take struct object_id Convert remaining callers of sha1_array_lookup to object_id Make sha1_array_append take a struct object_id * sha1-array: convert internal storage for struct sha1_array to object_id builtin/pull: convert to struct object_id submodule: convert check_for_new_submodule_commits to object_id sha1_name: convert disambiguate_hint_fn to take object_id sha1_name: convert struct disambiguate_state to object_id test-sha1-array: convert most code to struct object_id parse-options-cb: convert sha1_array_append caller to struct object_id fsck: convert init_skiplist to struct object_id builtin/receive-pack: convert portions to struct object_id builtin/pull: convert portions to struct object_id builtin/diff: convert to struct object_id Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ Define new hash-size constants for allocating memory
2017-04-16Merge branch 'jc/unused-symbols'Libravatar Junio C Hamano1-1/+0
Code cleanup. * jc/unused-symbols: remote.[ch]: parse_push_cas_option() can be static
2017-04-11remote: expose parse_push_refspec functionLibravatar Brandon Williams1-0/+1
A future patch needs access to the 'parse_push_refspec()' function so let's export the function so other modules can use it. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>