| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git push --force-with-lease[=<ref>]" can easily be misused to lose
commits unless the user takes good care of their own "git fetch".
A new option "--force-if-includes" attempts to ensure that what is
being force-pushed was created after examining the commit at the
tip of the remote ref that is about to be force-replaced.
* sk/force-if-includes:
t, doc: update tests, reference for "--force-if-includes"
push: parse and set flag for "--force-if-includes"
push: add reflog check for "--force-if-includes"
|
|
"git fetch" and "git push" support negative refspecs.
* jk/refspecs-negative:
refspec: add support for negative refspecs
|
|
Add a check to verify if the remote-tracking ref of the local branch
is reachable from one of its "reflog" entries.
The check iterates through the local ref's reflog to see if there
is an entry for the remote-tracking ref and collecting any commits
that are seen, into a list; the iteration stops if an entry in the
reflog matches the remote ref or if the entry timestamp is older
the latest entry of the remote ref's "reflog". If there wasn't an
entry found for the remote ref, "in_merge_bases_many()" is called
to check if it is reachable from the list of collected commits.
When a local branch that is based on a remote ref, has been rewound
and is to be force pushed on the remote, "--force-if-includes" runs
a check that ensures any updates to the remote-tracking ref that may
have happened (by push from another repository) in-between the time
of the last update to the local branch (via "git-pull", for instance)
and right before the time of push, have been integrated locally
before allowing a forced update.
If the new option is passed without specifying "--force-with-lease",
or specified along with "--force-with-lease=<refname>:<expect>" it
is a "no-op".
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both fetch and push support pattern refspecs which allow fetching or
pushing references that match a specific pattern. Because these patterns
are globs, they have somewhat limited ability to express more complex
situations.
For example, suppose you wish to fetch all branches from a remote except
for a specific one. To allow this, you must setup a set of refspecs
which match only the branches you want. Because refspecs are either
explicit name matches, or simple globs, many patterns cannot be
expressed.
Add support for a new type of refspec, referred to as "negative"
refspecs. These are prefixed with a '^' and mean "exclude any ref
matching this refspec". They can only have one "side" which always
refers to the source. During a fetch, this refers to the name of the ref
on the remote. During a push, this refers to the name of the ref on the
local side.
With negative refspecs, users can express more complex patterns. For
example:
git fetch origin refs/heads/*:refs/remotes/origin/* ^refs/heads/dontwant
will fetch all branches on origin into remotes/origin, but will exclude
fetching the branch named dontwant.
Refspecs today are commutative, meaning that order doesn't expressly
matter. Rather than forcing an implied order, negative refspecs will
always be applied last. That is, in order to match, a ref must match at
least one positive refspec, and match none of the negative refspecs.
This is similar to how negative pathspecs work.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
The new introduced "proc-receive" hook may handle a command for a
pseudo-reference with a zero-old as its old-oid, while the hook may
create or update a reference with different name, different new-oid,
and different old-oid (the reference may exist already with a non-zero
old-oid). Current "report-status" protocol cannot report the status for
such reference rewrite.
Add new capability "report-status-v2" and new report protocol which is
not backward compatible for report of git-push.
If a user pushes to a pseudo-reference "refs/for/master/topic", and
"receive-pack" creates two new references "refs/changes/23/123/1" and
"refs/changes/24/124/1", for client without the knowledge of
"report-status-v2", "receive-pack" will only send "ok/ng" directives in
the report, such as:
ok ref/for/master/topic
But for client which has the knowledge of "report-status-v2",
"receive-pack" will use "option" directives to report more attributes
for the reference given by the above "ok/ng" directive.
ok refs/for/master/topic
option refname refs/changes/23/123/1
option new-oid <new-oid>
ok refs/for/master/topic
option refname refs/changes/24/124/1
option new-oid <new-oid>
The client will report two new created references to the end user.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git calls an internal `execute_commands` function to handle commands
sent from client to `git-receive-pack`. Regardless of what references
the user pushes, git creates or updates the corresponding references if
the user has write-permission. A contributor who has no
write-permission, cannot push to the repository directly. So, the
contributor has to write commits to an alternate location, and sends
pull request by emails or by other ways. We call this workflow as a
distributed workflow.
It would be more convenient to work in a centralized workflow like what
Gerrit provided for some cases. For example, a read-only user who
cannot push to a branch directly can run the following `git push`
command to push commits to a pseudo reference (has a prefix "refs/for/",
not "refs/heads/") to create a code review.
git push origin \
HEAD:refs/for/<branch-name>/<session>
The `<branch-name>` in the above example can be as simple as "master",
or a more complicated branch name like "foo/bar". The `<session>` in
the above example command can be the local branch name of the client
side, such as "my/topic".
We cannot implement a centralized workflow elegantly by using
"pre-receive" + "post-receive", because Git will call the internal
function "execute_commands" to create references (even the special
pseudo reference) between these two hooks. Even though we can delete
the temporarily created pseudo reference via the "post-receive" hook,
having a temporary reference is not safe for concurrent pushes.
So, add a filter and a new handler to support this kind of workflow.
The filter will check the prefix of the reference name, and if the
command has a special reference name, the filter will turn a specific
field (`run_proc_receive`) on for the command. Commands with this filed
turned on will be executed by a new handler (a hook named
"proc-receive") instead of the internal `execute_commands` function.
We can use this "proc-receive" command to create pull requests or send
emails for code review.
Suggested by Junio, this "proc-receive" hook reads the commands,
push-options (optional), and send result using a protocol in pkt-line
format. In the following example, the letter "S" stands for
"receive-pack" and letter "H" stands for the hook.
# Version and features negotiation.
S: PKT-LINE(version=1\0push-options atomic...)
S: flush-pkt
H: PKT-LINE(version=1\0push-options...)
H: flush-pkt
# Send commands from server to the hook.
S: PKT-LINE(<old-oid> <new-oid> <ref>)
S: ... ...
S: flush-pkt
# Send push-options only if the 'push-options' feature is enabled.
S: PKT-LINE(push-option)
S: ... ...
S: flush-pkt
# Receive result from the hook.
# OK, run this command successfully.
H: PKT-LINE(ok <ref>)
# NO, I reject it.
H: PKT-LINE(ng <ref> <reason>)
# Fall through, let 'receive-pack' to execute it.
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option fall-through)
# OK, but has an alternate reference. The alternate reference name
# and other status can be given in options
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option refname <refname>)
H: PKT-LINE(option old-oid <old-oid>)
H: PKT-LINE(option new-oid <new-oid>)
H: PKT-LINE(option forced-update)
H: ... ...
H: flush-pkt
After receiving a command, the hook will execute the command, and may
create/update different reference. For example, a command for a pseudo
reference "refs/for/master/topic" may create/update different reference
such as "refs/pull/123/head". The alternate reference name and other
status are given in option lines.
The list of commands returned from "proc-receive" will replace the
relevant commands that are sent from user to "receive-pack", and
"receive-pack" will continue to run the "execute_commands" function and
other routines. Finally, the result of the execution of these commands
will be reported to end user.
The reporting function from "receive-pack" to "send-pack" will be
extended in latter commit just like what the "proc-receive" hook reports
to "receive-pack".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name "argv-array" isn't very good, because it describes what the
data type can be used for (program argument arrays), not what it
actually is (a dynamically-growing string array that maintains a
NULL-terminator invariant). This leads to people being hesitant to use
it for other cases where it would actually be a good fit. The existing
name is also clunky to use. It's overly long, and the name often leads
to saying things like "argv.argv" (i.e., the field names overlap with
variable names, since they're describing the use, not the type). Let's
give it a more neutral name.
I settled on "strvec" because "vector" is the name for a dynamic array
type in many programming languages. "strarray" would work, too, but it's
longer and a bit more awkward to say (and don't we all say these things
in our mind as we type them?).
A more extreme direction would be a generic data structure which stores
a NULL-terminated of _any_ type. That would be easy to do with void
pointers, but we'd lose some type safety for the existing cases. Plus it
raises questions about memory allocation and ownership. So I limited
myself here to changing names only, and not semantics. If we do find a
use for that more generic data type, we could perhaps implement it at a
lower level and then provide type-safe wrappers around it for strings.
But that can come later.
This patch does the minimum to convert the struct and function names in
the header and implementation, leaving a few things for follow-on
patches:
- files retain their original names for now
- struct field names are retained for now
- there's a preprocessor compat layer that lets most users remain the
same for now. The exception is headers which made a manual forward
declaration of the struct. I've converted them (and their dependent
function declarations) here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated before the transaction is
complete, remote-curl will blindly forward the packets before waiting on
more input from fetch-pack. Meanwhile, fetch-pack will read the
transaction and continue reading, expecting more input to continue the
transaction. This results in a deadlock between the two processes.
This can be seen in the following command which does not terminate:
$ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
whereas the v1 version does terminate as expected:
$ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
fatal: the remote end hung up unexpectedly
Instead of blindly forwarding packets, make remote-curl insert a
response end packet after proxying the responses from the remote server
when using stateless_connect(). On the RPC client side, ensure that each
response ends as described.
A separate control packet is chosen because we need to be able to
differentiate between what the remote server sends and remote-curl's
control packets. By ensuring in the remote-curl code that a server
cannot send response end packets, we prevent a malicious server from
being able to perform a denial of service attack in which they spoof a
response end packet and cause the described deadlock to happen.
Reported-by: Force Charlie <charlieio@outlook.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 9700fae5ee (for-each-ref: let upstream/push report the remote
ref name, 2017-11-07) added a remote_ref_for_branch() helper, which
is modeled after remote_for_branch(). This includes providing an
"explicit" out-parameter that tells the caller whether the remote
was configured by the user, or whether we picked a default name like
"origin".
But unlike remote names, there is no default name when the user
didn't configure one. The only way the "explicit" parameter is used
by the caller is to use the value returned from the helper when it
is set, and use an empty string otherwise, ignoring the returned
value from the helper.
Let's drop the "explicit" out-parameter, and return NULL when the
returned value from the helper should be ignored, to simplify the
function interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the documentation from Documentation/technical/api-remote.txt to
remote.h and refspec.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
N.B. The doc for both push and fetch members of the remote struct aren't
moved because they are out of date, as the members were changed from arrays
of rspecs to struct refspec 2 years ago.
Also documentation/technical/api-remote.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comments stating that "struct hashmap_entry" must be the first
member in a struct are no longer valid.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mechanically and systematically drop "extern" from function
declarlation.
* dl/no-extern-in-func-decl:
*.[ch]: manually align parameter lists
*.[ch]: remove extern from function declarations using sed
*.[ch]: remove extern from function declarations using spatch
|
|
%(push:track) token used in the --format option to "git
for-each-ref" and friends was not showing the right branch, which
has been fixed.
* dr/ref-filter-push-track-fix:
ref-filter: use correct branch for %(push:track)
|
|
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.
Viewing this patch with 'git diff -w' should produce no output.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In ref-filter.c, when processing the atom %(push:track), the
ahead/behind values are computed using `stat_tracking_info` which refers
to the upstream branch.
Fix that by introducing a new flag `for_push` in `stat_tracking_info`
in remote.c, which does the same thing but for the push branch.
Update the few callers of `stat_tracking_info` to handle this flag. This
ensure that whenever we use this function in the future, we are careful
to specify is this should apply to the upstream or the push branch.
This bug was not detected in t/t6300-for-each-ref.sh because in the test
for push:track, both the upstream and the push branches were behind by 1
from the local branch. Change the test so that the upstream branch is
behind by 1 while the push branch is ahead by 1. This allows us to test
that %(push:track) refers to the correct branch.
This changes the expected value of some following tests (by introducing
new references), so update them too.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We provide a free_refs() function to free a list, but there's no easy
way for a caller to free a single ref. Let's make our singular
free_ref() function public. Since its name is so similar to the
list-freeing free_refs(), and because both of those functions have the
same signature, it might be easy to accidentally use the wrong one.
Let's call the singular version the more verbose "free_one_ref()" to
distinguish it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
|
|
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several commit walks in the codebase. Group them together into
a new commit-reach.c file and corresponding header. After we group these
walks into one place, we can reduce duplicate logic by calling
equivalent methods.
The ref_newer() method is used by 'git push -f' to check if a force-push
is necessary. By making the method public, we make it possible to test
the method directly without setting up an envieronment where a 'git
push' call makes sense.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement ref-in-want on the client side so that when a server supports
the "ref-in-want" feature, a client will send "want-ref" lines for each
reference the client wants to fetch. This feature allows clients to
tolerate inconsistencies that exist when a remote repository's refs
change during the course of negotiation.
This allows a client to request to request a particular ref without
specifying the OID of the ref. This means that instead of hitting an
error when a ref no longer points at the OID it did at the beginning of
negotiation, negotiation can continue and the value of that ref will be
sent at the termination of negotiation, just before a packfile is sent.
More information on the ref-in-want feature can be found in
Documentation/technical/protocol-v2.txt.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
|
|
Convert 'check_push_refs()' to take a 'struct refspec' as a parameter
instead of an array of 'const char *'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'match_push_refs()' to take a 'struct refspec' as a parameter
instead of an array of 'const char *'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'query_refspecs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'apply_refspecs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'get_stale_heads()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove 'add_prune_tags_to_fetch_refspec()' function and instead have the
only caller directly add the tag refspec using 'refspec_append()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the set of fetch refspecs stored in 'struct remote' to use
'struct refspec'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the set of push refspecs stored in 'struct remote' to use
'struct refspec'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for introducing an abstraction around a collection of
refspecs (much like how a 'struct pathspec' is a collection of 'struct
pathspec_item's) rename the existing 'struct refspec' to 'struct
refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for performing a refactor on refspec related code, move
the refspec parsing logic into its own file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
Teach ls-remote to optionally accept server options by specifying them
on the cmdline via '-o' or '--server-option'. These server options are
sent to the remote end when querying for the remote end's refs using
protocol version 2.
If communicating using a protocol other than v2 the provided options are
ignored and not sent to the remote end.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
Teach the client to be able to request a remote's refs using protocol
v2. This is done by having a client issue a 'ls-refs' request to a v2
server.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to prepare for the addition of protocol_v2 push the protocol
version discovery outside of 'get_remote_heads()'. This will allow for
keeping the logic for processing the reference advertisement for
protocol_v1 and protocol_v0 separate from the logic for protocol_v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" can spend a lot of cycles to compute the relation
between the current branch and its upstream, which can now be
disabled with "--no-ahead-behind" option.
* jh/status-no-ahead-behind:
status: support --no-ahead-behind in long format
status: update short status to respect --no-ahead-behind
status: add --[no-]ahead-behind to status and commit for V2 format.
stat_tracking_info: return +1 when branches not equal
|
|
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a macro with the refspec string "refs/tags/*:refs/tags/*". There's
been a pre-defined struct version of this since e0aaa29ff3 ("Have a
constant extern refspec for "--tags"", 2008-04-17), but nothing that
could be passed to e.g. add_fetch_refspec().
This will be used in subsequent commits to avoid hardcoding this
string in multiple places.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach long (normal) status format to respect the --no-ahead-behind
parameter and skip the possibly expensive ahead/behind computation
between the branch and the upstream.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "git status" and "git commit" to accept "--no-ahead-behind"
and "--ahead-behind" arguments to request quick or full ahead/behind
reporting.
When "--no-ahead-behind" is given, the existing porcelain V2 line
"branch.ab +x -y" is replaced with a new "branch.ab +? -?" line.
This indicates that the branch and its upstream are or are not equal
without the expense of computing the full ahead/behind values.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend stat_tracking_info() to return +1 when branches are not equal and to
take a new "enum ahead_behind_flags" argument to allow skipping the (possibly
expensive) ahead/behind computation.
This will be used in the next commit to allow "git status" to avoid full
ahead/behind calculations for performance reasons.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are times when scripts want to know not only the name of the
push branch on the remote, but also the name of the branch as known
by the remote repository.
An example of this is when a tool wants to push to the very same branch
from which it would pull automatically, i.e. the `<remote>` and the `<to>`
in `git push <remote> <from>:<to>` would be provided by
`%(upstream:remotename)` and `%(upstream:remoteref)`, respectively.
This patch offers the new suffix :remoteref for the `upstream` and `push`
atoms, allowing to show exactly that. Example:
$ cat .git/config
...
[remote "origin"]
url = https://where.do.we.come/from
fetch = refs/heads/*:refs/remote/origin/*
[branch "master"]
remote = origin
merge = refs/heads/master
[branch "develop/with/topics"]
remote = origin
merge = refs/heads/develop/with/topics
...
$ git for-each-ref \
--format='%(push) %(push:remoteref)' \
refs/heads
refs/remotes/origin/master refs/heads/master
refs/remotes/origin/develop/with/topics refs/heads/develop/with/topics
Signed-off-by: J Wyman <jwyman@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This gets rid of one use of get_sha1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --recurse-submodules --push-option=<string>" learned to
propagate the push option recursively down to pushes in submodules.
* bw/push-options-recursively-to-submodules:
push: propagate remote and refspec with --recurse-submodules
submodule--helper: add push-check subcommand
remote: expose parse_push_refspec function
push: propagate push-options with --recurse-submodules
push: unmark a local variable as static
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
|
Code cleanup.
* jc/unused-symbols:
remote.[ch]: parse_push_cas_option() can be static
|
|
A future patch needs access to the 'parse_push_refspec()' function so
let's export the function so other modules can use it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Srinidhi Kaushik
Jacob Keller
Jiang Xin
Jeff King
Denton Liu
Heba Waly
Eric Wong
Damien Robert
Elijah Newren
Derrick Stolee
Brandon Williams
Ævar Arnfjörð Bjarmason
Jeff Hostetler
J Wyman
brian m. carlson