| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When left-right traversal counts the commits in a diverged history, it
leaves the flags in the commits smudged, and we need to clear them before
we return. Otherwise the caller cannot inspect other branches with this
function again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
People seem to like "Your branch is ahead by N commit" report made by
"git checkout", but the interface into the statistics function was a bit
clunky. This splits the function into three parts:
* The core "commit counting" function that takes "struct branch" and
returns number of commits to show if we are ahead, behind or forked;
* Convenience "stat formating" function that takes "struct branch" and
formats the report into a given strbuf, using the above function;
* "checkout" specific function that takes "branch_info" (type that is
internal to checkout implementation), calls the above function and
print the formatted result.
in the hope that the former two can be more easily reusable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_explicit is called for each push refspec to try to
fully resolve the source and destination sides of the
refspec. Currently, we look at each refspec and report
errors on both the source and the dest side before aborting.
It makes sense to report errors for each refspec, since an
error in one is independent of an error in the other.
However, reporting errors on the 'dst' side of a refspec if
there has been an error on the 'src' side does not
necessarily make sense, since the interpretation of the
'dst' side depends on the 'src' side (for example, when
creating a new unqualified remote ref, we use the same type
as the src ref).
This patch lets match_explicit return early when the src
side of the refspec is bogus. We still look at all of the
refspecs before aborting the push, though.
At the same time, we clean up the call signature, which
previously took an extra "errs" flag. This was pointless, as
we didn't act on that flag, but rather just passed it back
to the caller. Instead, we now use the more traditional
"return -1" to signal an error, and the caller aggregates
the error count.
This change fixes two bugs, as well:
- the early return avoids a segfault when passing a NULL
matched_src to guess_ref()
- the check for multiple sources pointing to a single dest
aborted if the "err" flag was set. Presumably the intent
was not to bother with the check if we had no
matched_src. However, since the err flag was passed in
from the caller, we might abort the check just because a
previous refspec had a problem, which doesn't make
sense.
In practice, this didn't matter, since due to the error
flag we end up aborting the push anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/config-cb:
Provide git_config with a callback-data parameter
Conflicts:
builtin-add.c
builtin-cat-file.c
|
|
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
|
|
* pb/push:
add special "matching refs" refspec
|
|
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also fix an underallocation in walker.c::interpret_target().
Signed-off-by: Krzysztof Kowalczyk <kkowalczyk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/learn-HEAD:
Make ls-remote http://... list HEAD, like for git://...
Make walker.fetch_ref() take a struct ref.
|
|
* pb/remote-mirror-config:
Add a remote.*.mirror configuration option
|
|
The refspec refs/tags/*:refs/tags/* is sufficiently common and generic
to merit having a constant instead of generating it as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes a struct ref able to represent a symref, and makes http.c
able to recognize one, and makes transport.c look for "HEAD" as a ref
in the list, and makes it dereference symrefs for the resulting ref,
if any.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, a push like:
git push remote src:dst
would go through the following steps:
1. check for an unambiguous 'dst' on the remote; if it
exists, then push to that ref
2. otherwise, check if 'dst' begins with 'refs/'; if it
does, create a new ref
3. otherwise, complain because we don't know where in the
refs hierarchy to put 'dst'
However, in some cases, we can guess about the ref type of
'dst' based on the ref type of 'src'. Specifically, before
complaining we now check:
2.5. if 'src' resolves to a ref starting with refs/heads
or refs/tags, then prepend that to 'dst'
So now this creates a new branch on the remote, whereas it
previously failed with an error message:
git push master:newbranch
Note that, by design, we limit this DWIM behavior only to
source refs which resolve exactly (including symrefs which
resolve to existing refs). We still complain on a partial
destination refspec if the source is a raw sha1, or a ref
expression such as 'master~10'.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also tighten test to require it to be correct.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-fetch-regression-1.5.4:
git-fetch test: test tracking fetch results, not just FETCH_HEAD
Fix branches file configuration
Tighten refspec processing
Fix the wrong output of `git-show v1.3.0~155^2~4` in documentation.
|
|
Fetched remote branch from .git/branches/foo should fetch into
refs/heads/foo. Also when partial URL is given, the fetched head should
always be remote HEAD, and the result should not be stored anywhere.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
This was cherry picked from commit ef00d15 (Tighten refspec processing,
2008-03-17), and two fix-up commits 46220ca (remote.c: Fix overtight
refspec validation, 2008-03-20) and 7d19da4 (refspec: allow colon-less
wildcard "refs/category/*", 2008-03-25) squashed in.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --tags elsewhere" is implemented in terms of wildcarded refspec
"refs/tags/*" these days, and the user wants to push the tags under the
same name to the other branch. This resurrects the support for it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We tightened the refspec validation code in an earlier commit ef00d15
(Tighten refspec processing, 2008-03-17) per my suggestion, but the
suggestion was misguided to begin with and it broke this usage:
$ git push origin HEAD~12:master
The syntax of push refspecs and fetch refspecs are similar in that they
are both colon separated LHS and RHS (possibly prefixed with a + to
force), but the similarity ends there. For example, LHS in a push refspec
can be anything that evaluates to a valid object name at runtime (except
when colon and RHS is missing, or it is a glob), while it must be a
valid-looking refname in a fetch refspec. To validate them correctly, the
caller needs to be able to say which kind of refspecs they are. It is
unreasonable to keep a single interface that cannot tell which kind it is
dealing with, and ask it to behave sensibly.
This commit separates the parsing of the two into different functions, and
clarifies the code to implement the parsing proper (i.e. splitting into
two parts, making sure both sides are wildcard or neither side is).
This happens to also allow pushing a commit named with the esoteric "look
for that string" syntax:
$ git push ../test.git ':/remote.c: Fix overtight refspec:master'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jm/free:
Avoid unnecessary "if-before-free" tests.
Conflicts:
builtin-branch.c
|
|
* db/push-single-with-HEAD:
Resolve value supplied for no-colon push refspecs
|
|
Earlier we had a cop-out in the documentation to make the
behaviour "undefined" if configuration had more than one
insteadOf that would match the target URL, like this:
[url "git://git.or.cz/"]
insteadOf = "git.or.cz:" ; (1)
insteadOf = "repo.or.cz:" ; (2)
[url "/local/mirror/"]
insteadOf = "git.or.cz:myrepo" ; (3)
insteadOf = "repo.or.cz:" ; (4)
It would be most natural to take the longest and first match, i.e.
- rewrite "git.or.cz:frotz" to "git://git.or.cz/frotz" by using
(1),
- rewrite "git.or.cz:myrepo/xyzzy" to "/local/mirror/xyzzy" by favoring
(3) over (1), and
- rewrite "repo.or.cz:frotz" to "git://git.or.cz/frotz" by
favoring (2) over (4).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows users with different preferences for access methods to the
same remote repositories to rewrite each other's URLs by pattern
matching across a large set of similiarly set up repositories to each
get the desired access.
For example, if you don't have a kernel.org account, you might want
settings like:
[url "git://git.kernel.org/pub/"]
insteadOf = master.kernel.org:/pub
Then, if you give git a URL like:
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
it will act like you gave it:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
and you can cut-and-paste pull requests in email without fixing them
by hand, for example.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing a refspec like "HEAD", we used to treat it as
"HEAD:HEAD", which didn't work without rewriting. Instead, we should
resolve the ref. If it's a symref, further require it to point to a
branch, to avoid doing anything especially unexpected. Also remove the
rewriting previously added in builtin-push.
Since the code for "HEAD" uses the regular refspec parsing, it
automatically handles "+HEAD" without anything special.
[jc: added a further test to make sure that "remote.*.push = HEAD" works]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original problem was that the parsers for configuration files were
getting confused by seeing as nicknames remotes that involved
directory-changing characters. In particular, the branches config file
for ".." was particularly mystifying on platforms that can open
directories and read odd data from them.
The validation function was written by Junio Hamano (with a typo
corrected).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
branch.*.{remote,merge} expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration reader to enumerate branches that have configuration
data were not careful enough and failed to skip "branch.<variable>"
entries (e.g. branch.autosetupmerge). This resulted in bogus attempt to
allocate huge memory.
Noticed by David Miller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
|
|
As well as allowing a default http.proxy option, allow it to be set
per-remote.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old rules used by fetch were coded as a series of ifs. The old
rules are:
1) match full refname if it starts with "refs/" or matches "HEAD"
2) verify that full refname starts with "refs/"
3) match abbreviated name in "refs/" if it starts with "heads/",
"tags/", or "remotes/".
4) match abbreviated name in "refs/heads/"
This is replaced by the new rules
a) match full refname
b) match abbreviated name prefixed with "refs/"
c) match abbreviated name prefixed with "refs/heads/"
The details of the new rules are different from the old rules. We no
longer verify that the full refname starts with "refs/". The new rule
(a) matches any full string. The old rules (1) and (2) were stricter.
Now, the caller is responsible for using sensible full refnames. This
should be the case for the current code. The new rule (b) is less
strict than old rule (3). The new rule accepts abbreviated names that
start with a non-standard prefix below "refs/".
Despite this modifications the new rules should handle all cases as
expected. Two tests are added to verify that fetch does not resolve
short tags or HEAD in remotes.
We may even think about loosening the rules a bit more and unify them
with the rev-parse rules. This would be done by replacing
ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test
would break.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit changes the rules for resolving refspecs to match the
rules for resolving refs in rev-parse. git-rev-parse uses clear rules
to resolve a short ref to its full name, which are well documented.
The rules for resolving refspecs documented in git-send-pack were
less strict and harder to understand. This commit replaces them by
the rules of git-rev-parse.
The unified rules are easier to understand and better resolve ambiguous
cases. You can now push from a repository containing several branches
ending on the same short name.
Note, this may break existing setups. For example, "master" will no longer
resolve to "origin/master" even when there is no other "master" elsewhere.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was a static in remote.c, but is generally useful.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Existing "git push --all" is almost perfect for backing up to
another repository, except that "--all" only means "all
branches" in modern git, and it does not delete old branches and
tags that exist at the back-up repository that you have removed
from your local repository.
This teaches "git-send-pack" a new "--mirror" option. The
difference from the "--all" option are that (1) it sends all
refs, not just branches, and (2) it deletes old refs you no
longer have on the local side from the remote side.
Original patch by Junio C Hamano.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the branch named with branch.$name.merge is not covered by
the fetch configuration for the remote repository named with
branch.$name.remote, we automatically add that branch to the set
of branches to be fetched. However, if the remote repository
does not have that branch (e.g. it used to exist, but got
removed), this is not a reason to fail the git-fetch itself.
The situation however will be noticed if git-fetch was called by
git-pull, as the resulting FETCH_HEAD would not have any entry
that is marked for merging.
Acked-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
|
|
When matching source and destination refs, we were failing
to pull the 'force' parameter from wildcard refspecs (but
not explicit ones) and attach it to the ref struct.
This adds a test for explicit and wildcard refspecs; the
latter fails without this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Originally-by: Väinö Järvelä <v@pp.inet.fi>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If multiple refspecs matched the same ref, the update would be
processed multiple times. Now having the same destination for the same
source has no additional effect, and having the same destination for
different sources is an error.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If `git push url foo` can't find a local branch named foo we can't
match it to any remote branch as the local branch is NULL and its
name is probably at position 0x34 in memory. On most systems that
isn't a valid address for git-send-pack's virtual address space
and we segfault.
If we can't find a source match and we have no destination we
need to abort the match function early before we try to match the
destination against the remote.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This simple change makes the body of "case 0" easier to read; no
matter what the value of matched_src is we want to break out of
the switch and not fall through. We only want to display an error
if matched_src is NULL, as this indicates there is no local branch
matching the input.
Also modified the default case's error message so it uses one less
line of text. Even at 8 column per tab indentation we still don't
break 80 columns with this new formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git style tends to prefer "!x" over "x == NULL". Make it so in
these handful of locations that were not following along.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Anyplace we talk about the address of a remote repository we always
refer to it as a URL, especially in the configuration file and
.git/remotes where we call it "remote.$n.url" or start the first
line with "URL:". Calling this value a uri within the internal C
code just doesn't jive well with our commonly accepted terms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Johannes Schindelin
Krzysztof Kowalczyk
Daniel Barkalow
Paolo Bonzini
Jonas Fonseca
Jim Meyering
Sam Vilain
Steffen Prohaska
Andy Whitcroft
Alex Riesen
Shawn O. Pearce