summaryrefslogtreecommitdiff
path: root/remote-testsvn.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-16refs: convert read_ref and read_ref_full to object_idLibravatar brian m. carlson1-1/+1
All but two of the call sites already have parameters using the hash parameter of struct object_id, so convert them to take a pointer to the struct directly. Also convert refs_read_refs_full, the underlying implementation. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-24Merge branch 'ab/free-and-null'Libravatar Junio C Hamano1-2/+1
A common pattern to free a piece of memory and assign NULL to the pointer that used to point at it has been replaced with a new FREE_AND_NULL() macro. * ab/free-and-null: *.[ch] refactoring: make use of the FREE_AND_NULL() macro coccinelle: make use of the "expression" FREE_AND_NULL() rule coccinelle: add a rule to make "expression" code use FREE_AND_NULL() coccinelle: make use of the "type" FREE_AND_NULL() rule coccinelle: add a rule to make "type" code use FREE_AND_NULL() git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
2017-06-19Merge branch 'bw/object-id'Libravatar Junio C Hamano1-11/+11
Conversion from uchar[20] to struct object_id continues. * bw/object-id: (33 commits) diff: rename diff_fill_sha1_info to diff_fill_oid_info diffcore-rename: use is_empty_blob_oid tree-diff: convert path_appendnew to object_id tree-diff: convert diff_tree_paths to struct object_id tree-diff: convert try_to_follow_renames to struct object_id builtin/diff-tree: cleanup references to sha1 diff-tree: convert diff_tree_sha1 to struct object_id notes-merge: convert write_note_to_worktree to struct object_id notes-merge: convert verify_notes_filepair to struct object_id notes-merge: convert find_notes_merge_pair_ps to struct object_id notes-merge: convert merge_from_diffs to struct object_id notes-merge: convert notes_merge* to struct object_id tree-diff: convert diff_root_tree_sha1 to struct object_id combine-diff: convert find_paths_* to struct object_id combine-diff: convert diff_tree_combined to struct object_id diff: convert diff_flush_patch_id to struct object_id patch-ids: convert to struct object_id diff: finish conversion for prepare_temp_file to struct object_id diff: convert reuse_worktree_file to struct object_id diff: convert fill_filespec to struct object_id ...
2017-06-16coccinelle: make use of the "type" FREE_AND_NULL() ruleLibravatar Ævar Arnfjörð Bjarmason1-2/+1
Apply the result of the just-added coccinelle rule. This manually excludes a few occurrences, mostly things that resulted in many FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent change. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02notes: convert some accessor functions to struct object_idLibravatar brian m. carlson1-5/+5
Convert add_note, get_note, and copy_note to take struct object_id. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02notes: make get_note return pointer to struct object_idLibravatar brian m. carlson1-3/+3
Make get_note return a pointer to a const struct object_id. Add a defensive check to ensure we don't accidentally dereference a NULL pointer. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02notes: convert for_each_note to struct object_idLibravatar brian m. carlson1-4/+4
Convert for_each_note and each of the callbacks to use struct object_id. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-26use xfopen() in more placesLibravatar Nguyễn Thái Ngọc Duy1-6/+2
xfopen() - provides error details - explains error on reading, or writing, or whatever operation - has l10n support - prints file name in the error Some of these are missing in the places that are replaced with xfopen(), which is a clear win. In some other places, it's just less code (not as clearly a win as the previous case but still is). The only slight regresssion is in remote-testsvn, where we don't report the file class (marks files) in the error messages anymore. But since this is a _test_ svn remote transport, I'm not too concerned. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01common-main: call git_extract_argv0_path()Libravatar Jeff King1-1/+0
Every program which links against libgit.a must call this function, or risk hitting an assert() in system_path() that checks whether we have configured argv0_path (though only when RUNTIME_PREFIX is defined, so essentially only on Windows). Looking at the diff, you can see that putting it into the common main() saves us having to do it individually in each of the external commands. But what you can't see are the cases where we _should_ have been doing so, but weren't (e.g., git-credential-store, and all of the t/helper test programs). This has been an accident-waiting-to-happen for a long time, but wasn't triggered until recently because it involves one of those programs actually calling system_path(). That happened with git-credential-store in v2.8.0 with ae5f677 (lazily load core.sharedrepository, 2016-03-11). The program: - takes a lock file, which... - opens a tempfile, which... - calls adjust_shared_perm to fix permissions, which... - lazy-loads the config (as of ae5f677), which... - calls system_path() to find the location of /etc/gitconfig On systems with RUNTIME_PREFIX, this means credential-store reliably hits that assert() and cannot be used. We never noticed in the test suite, because we set GIT_CONFIG_NOSYSTEM there, which skips the system_path() lookup entirely. But if we were to tweak git_config() to find /etc/gitconfig even when we aren't going to open it, then the test suite shows multiple failures (for credential-store, and for some other test helpers). I didn't include that tweak here because it's way too specific to this particular call to be worth carrying around what is essentially dead code. The implementation is fairly straightforward, with one exception: there is exactly one caller (git.c) that actually cares about the result of the function, and not the side-effect of setting up argv0_path. We can accommodate that by simply replacing the value of argv[0] in the array we hand down to cmd_main(). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01add an extra level of indirection to main()Libravatar Jeff King1-1/+1
There are certain startup tasks that we expect every git process to do. In some cases this is just to improve the quality of the program (e.g., setting up gettext()). In others it is a requirement for using certain functions in libgit.a (e.g., system_path() expects that you have called git_extract_argv0_path()). Most commands are builtins and are covered by the git.c version of main(). However, there are still a few external commands that use their own main(). Each of these has to remember to include the correct startup sequence, and we are not always consistent. Rather than just fix the inconsistencies, let's make this harder to get wrong by providing a common main() that can run this standard startup. We basically have two options to do this: - the compat/mingw.h file already does something like this by adding a #define that replaces the definition of main with a wrapper that calls mingw_startup(). The upside is that the code in each program doesn't need to be changed at all; it's rewritten on the fly by the preprocessor. The downside is that it may make debugging of the startup sequence a bit more confusing, as the preprocessor is quietly inserting new code. - the builtin functions are all of the form cmd_foo(), and git.c's main() calls them. This is much more explicit, which may make things more obvious to somebody reading the code. It's also more flexible (because of course we have to figure out _which_ cmd_foo() to call). The downside is that each of the builtins must define cmd_foo(), instead of just main(). This patch chooses the latter option, preferring the more explicit approach, even though it is more invasive. We introduce a new file common-main.c, with the "real" main. It expects to call cmd_main() from whatever other objects it is linked against. We link common-main.o against anything that links against libgit.a, since we know that such programs will need to do this setup. Note that common-main.o can't actually go inside libgit.a, as the linker would not pick up its main() function automatically (it has no callers). The rest of the patch is just adjusting all of the various external programs (mostly in t/helper) to use cmd_main(). I've provided a global declaration for cmd_main(), which means that all of the programs also need to match its signature. In particular, many functions need to switch to "const char **" instead of "char **" for argv. This effect ripples out to a few other variables and functions, as well. This makes the patch even more invasive, but the end result is much better. We should be treating argv strings as const anyway, and now all programs conform to the same signature (which also matches the way builtins are defined). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-15strbuf: introduce strbuf_getline_{lf,nul}()Libravatar Junio C Hamano1-2/+2
The strbuf_getline() interface allows a byte other than LF or NUL as the line terminator, but this is only because I wrote these codepaths anticipating that there might be a value other than NUL and LF that could be useful when I introduced line_termination long time ago. No useful caller that uses other value has emerged. By now, it is clear that the interface is overly broad without a good reason. Many codepaths have hardcoded preference to read either LF terminated or NUL terminated records from their input, and then call strbuf_getline() with LF or NUL as the third parameter. This step introduces two thin wrappers around strbuf_getline(), namely, strbuf_getline_lf() and strbuf_getline_nul(), and mechanically rewrites these call sites to call either one of them. The changes contained in this patch are: * introduction of these two functions in strbuf.[ch] * mechanical conversion of all callers to strbuf_getline() with either '\n' or '\0' as the third parameter to instead call the respective thin wrapper. After this step, output from "git grep 'strbuf_getline('" would become a lot smaller. An interim goal of this series is to make this an empty set, so that we can have strbuf_getline_crlf() take over the shorter name strbuf_getline(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-22refs: move the remaining ref module declarations to refs.hLibravatar Michael Haggerty1-0/+1
Some functions from the refs module were still declared in cache.h. Move them to refs.h. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20run-command: introduce CHILD_PROCESS_INITLibravatar René Scharfe1-2/+1
Most struct child_process variables are cleared using memset first after declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to initialize them statically instead. That's shorter, doesn't require a function call and is slightly more readable (especially given that we already have STRBUF_INIT, ARGV_ARRAY_INIT etc.). Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-18remote-testsvn: use internal argv_array of struct child_process in cmd_import()Libravatar René Scharfe1-9/+7
Use the existing argv_array member instead of providing our own. This way we don't have to initialize or clean it up explicitly. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-10use strchrnul() in place of strchr() and strlen()Libravatar Rohit Mani1-2/+2
Avoid scanning strings twice, once with strchr() and then with strlen(), by using strchrnul(). Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Rohit Mani <rohit.mani@outlook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05replace {pre,suf}fixcmp() with {starts,ends}_with()Libravatar Christian Couder1-5/+5
Leaving only the function definitions and declarations so that any new topic in flight can still make use of the old functions, replace existing uses of the prefixcmp() and suffixcmp() with new API functions. The change can be recreated by mechanically applying this: $ git grep -l -e prefixcmp -e suffixcmp -- \*.c | grep -v strbuf\\.c | xargs perl -pi -e ' s|!prefixcmp\(|starts_with\(|g; s|prefixcmp\(|!starts_with\(|g; s|!suffixcmp\(|ends_with\(|g; s|suffixcmp\(|!ends_with\(|g; ' on the result of preparatory changes in this series. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-28sparse: Fix mingw_main() argument number/type errorsLibravatar Ramsay Jones1-1/+1
Sparse issues 68 errors (two errors for each main() function) such as the following: SP git.c git.c:510:5: error: too many arguments for function mingw_main git.c:510:5: error: symbol 'mingw_main' redeclared with different type \ (originally declared at git.c:510) - different argument counts The errors are caused by the 'main' macro used by the MinGW build to provide a replacement main() function. The original main function is effectively renamed to 'mingw_main' and is called from the new main function. The replacement main is used to execute certain actions common to all git programs on MinGW (e.g. ensure the standard I/O streams are in binary mode). In order to suppress the errors, we change the macro to include the parameters in the declaration of the mingw_main function. Unfortunately, this change provokes both sparse and gcc to complain about 9 calls to mingw_main(), such as the following: CC git.o git.c: In function 'main': git.c:510: warning: passing argument 2 of 'mingw_main' from \ incompatible pointer type git.c:510: note: expected 'const char **' but argument is of \ type 'char **' In order to suppress these warnings, since both of the main functions need to be declared with the same prototype, we change the declaration of the 9 main functions, thus: int main(int argc, char **argv) Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-15remote-testsvn: fix unitialized variableLibravatar Jeff King1-1/+3
In remote-test-svn, there is a parse_rev_note function to parse lines of the form "Revision-number" from notes. If it finds such a line and parses it, it returns 0, copying the value into a "struct rev_note". If it finds an entry that is garbled or out of range, it returns -1 to signal an error. However, if it does not find any "Revision-number" line at all, it returns success but does not put anything into the rev_note. So upon a successful return, the rev_note may or may not be initialized, and the caller has no way of knowing. gcc does not usually catch the use of the unitialized variable because the conditional assignment happens in a separate function from the point of use. However, when compiling with -O3, gcc will inline parse_rev_note and notice the problem. We can fix it by returning "-1" when no note is found (so on a zero return, we always found a valid value). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07remote-svn: add marks-file regenerationLibravatar Florian Achleitner1-0/+71
fast-import mark files are stored outside the object database and are therefore not fetched and can be lost somehow else. marks provide a svn revision --> git sha1 mapping, while the notes that are attached to each commit when it is imported provide a git sha1 --> svn revision mapping. If the marks file is not available or not plausible, regenerate it by walking through the notes tree. , i.e. The plausibility check tests if the highest revision in the marks file matches the revision of the top ref. It doesn't ensure that the mark file is completely correct. This could only be done with an effort equal to unconditional regeneration. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07remote-svn: add incremental importLibravatar Florian Achleitner1-4/+75
Search for a note attached to the ref to update and read it's 'Revision-number:'-line. Start import from the next svn revision. If there is no next revision in the svn repo, svnrdump terminates with a message on stderr an non-zero return value. This looks a little weird, but there is no other way to know whether there is a new revision in the svn repo. On the start of an incremental import, the parent of the first commit in the fast-import stream is set to the branch name to update. All following commits specify their parent by a mark number. Previous mark files are currently not reused. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07remote-svn: Activate import/export-marks for fast-importLibravatar Florian Achleitner1-1/+11
Enable import and export of a marks file by sending the appropriate feature commands to fast-import before sending data. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07Allow reading svn dumps from files via file:// urlsLibravatar Florian Achleitner1-19/+33
For testing as well as for importing large, already available dumps, it's useful to bypass svnrdump and replay the svndump from a file directly. Add support for file:// urls in the remote url, e.g. svn::file:///path/to/dump When the remote helper finds an url starting with file:// it tries to open that file instead of invoking svnrdump. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07Implement a remote helper for svn in CLibravatar Florian Achleitner1-0/+176
Enable basic fetching from subversion repositories. When processing remote URLs starting with testsvn::, git invokes this remote-helper. It starts svnrdump to extract revisions from the subversion repository in the 'dump file format', and converts them to a git-fast-import stream using the functions of vcs-svn/. Imported refs are created in a private namespace at refs/svn/<remote-name>/master. The revision history is imported linearly (no branch detection) and completely, i.e. from revision 0 to HEAD. The 'bidi-import' capability is used. The remote-helper expects data from fast-import on its stdin. It buffers a batch of 'import' command lines in a string_list before starting to process them. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>