summaryrefslogtreecommitdiff
path: root/remote-testsvn.c
AgeCommit message (Collapse)AuthorFilesLines
2016-01-15strbuf: introduce strbuf_getline_{lf,nul}()Libravatar Junio C Hamano1-2/+2
The strbuf_getline() interface allows a byte other than LF or NUL as the line terminator, but this is only because I wrote these codepaths anticipating that there might be a value other than NUL and LF that could be useful when I introduced line_termination long time ago. No useful caller that uses other value has emerged. By now, it is clear that the interface is overly broad without a good reason. Many codepaths have hardcoded preference to read either LF terminated or NUL terminated records from their input, and then call strbuf_getline() with LF or NUL as the third parameter. This step introduces two thin wrappers around strbuf_getline(), namely, strbuf_getline_lf() and strbuf_getline_nul(), and mechanically rewrites these call sites to call either one of them. The changes contained in this patch are: * introduction of these two functions in strbuf.[ch] * mechanical conversion of all callers to strbuf_getline() with either '\n' or '\0' as the third parameter to instead call the respective thin wrapper. After this step, output from "git grep 'strbuf_getline('" would become a lot smaller. An interim goal of this series is to make this an empty set, so that we can have strbuf_getline_crlf() take over the shorter name strbuf_getline(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-22refs: move the remaining ref module declarations to refs.hLibravatar Michael Haggerty1-0/+1
Some functions from the refs module were still declared in cache.h. Move them to refs.h. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20run-command: introduce CHILD_PROCESS_INITLibravatar René Scharfe1-2/+1
Most struct child_process variables are cleared using memset first after declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to initialize them statically instead. That's shorter, doesn't require a function call and is slightly more readable (especially given that we already have STRBUF_INIT, ARGV_ARRAY_INIT etc.). Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-18remote-testsvn: use internal argv_array of struct child_process in cmd_import()Libravatar René Scharfe1-9/+7
Use the existing argv_array member instead of providing our own. This way we don't have to initialize or clean it up explicitly. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-10use strchrnul() in place of strchr() and strlen()Libravatar Rohit Mani1-2/+2
Avoid scanning strings twice, once with strchr() and then with strlen(), by using strchrnul(). Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Rohit Mani <rohit.mani@outlook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05replace {pre,suf}fixcmp() with {starts,ends}_with()Libravatar Christian Couder1-5/+5
Leaving only the function definitions and declarations so that any new topic in flight can still make use of the old functions, replace existing uses of the prefixcmp() and suffixcmp() with new API functions. The change can be recreated by mechanically applying this: $ git grep -l -e prefixcmp -e suffixcmp -- \*.c | grep -v strbuf\\.c | xargs perl -pi -e ' s|!prefixcmp\(|starts_with\(|g; s|prefixcmp\(|!starts_with\(|g; s|!suffixcmp\(|ends_with\(|g; s|suffixcmp\(|!ends_with\(|g; ' on the result of preparatory changes in this series. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-28sparse: Fix mingw_main() argument number/type errorsLibravatar Ramsay Jones1-1/+1
Sparse issues 68 errors (two errors for each main() function) such as the following: SP git.c git.c:510:5: error: too many arguments for function mingw_main git.c:510:5: error: symbol 'mingw_main' redeclared with different type \ (originally declared at git.c:510) - different argument counts The errors are caused by the 'main' macro used by the MinGW build to provide a replacement main() function. The original main function is effectively renamed to 'mingw_main' and is called from the new main function. The replacement main is used to execute certain actions common to all git programs on MinGW (e.g. ensure the standard I/O streams are in binary mode). In order to suppress the errors, we change the macro to include the parameters in the declaration of the mingw_main function. Unfortunately, this change provokes both sparse and gcc to complain about 9 calls to mingw_main(), such as the following: CC git.o git.c: In function 'main': git.c:510: warning: passing argument 2 of 'mingw_main' from \ incompatible pointer type git.c:510: note: expected 'const char **' but argument is of \ type 'char **' In order to suppress these warnings, since both of the main functions need to be declared with the same prototype, we change the declaration of the 9 main functions, thus: int main(int argc, char **argv) Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-15remote-testsvn: fix unitialized variableLibravatar Jeff King1-1/+3
In remote-test-svn, there is a parse_rev_note function to parse lines of the form "Revision-number" from notes. If it finds such a line and parses it, it returns 0, copying the value into a "struct rev_note". If it finds an entry that is garbled or out of range, it returns -1 to signal an error. However, if it does not find any "Revision-number" line at all, it returns success but does not put anything into the rev_note. So upon a successful return, the rev_note may or may not be initialized, and the caller has no way of knowing. gcc does not usually catch the use of the unitialized variable because the conditional assignment happens in a separate function from the point of use. However, when compiling with -O3, gcc will inline parse_rev_note and notice the problem. We can fix it by returning "-1" when no note is found (so on a zero return, we always found a valid value). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07remote-svn: add marks-file regenerationLibravatar Florian Achleitner1-0/+71
fast-import mark files are stored outside the object database and are therefore not fetched and can be lost somehow else. marks provide a svn revision --> git sha1 mapping, while the notes that are attached to each commit when it is imported provide a git sha1 --> svn revision mapping. If the marks file is not available or not plausible, regenerate it by walking through the notes tree. , i.e. The plausibility check tests if the highest revision in the marks file matches the revision of the top ref. It doesn't ensure that the mark file is completely correct. This could only be done with an effort equal to unconditional regeneration. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07remote-svn: add incremental importLibravatar Florian Achleitner1-4/+75
Search for a note attached to the ref to update and read it's 'Revision-number:'-line. Start import from the next svn revision. If there is no next revision in the svn repo, svnrdump terminates with a message on stderr an non-zero return value. This looks a little weird, but there is no other way to know whether there is a new revision in the svn repo. On the start of an incremental import, the parent of the first commit in the fast-import stream is set to the branch name to update. All following commits specify their parent by a mark number. Previous mark files are currently not reused. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07remote-svn: Activate import/export-marks for fast-importLibravatar Florian Achleitner1-1/+11
Enable import and export of a marks file by sending the appropriate feature commands to fast-import before sending data. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07Allow reading svn dumps from files via file:// urlsLibravatar Florian Achleitner1-19/+33
For testing as well as for importing large, already available dumps, it's useful to bypass svnrdump and replay the svndump from a file directly. Add support for file:// urls in the remote url, e.g. svn::file:///path/to/dump When the remote helper finds an url starting with file:// it tries to open that file instead of invoking svnrdump. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-07Implement a remote helper for svn in CLibravatar Florian Achleitner1-0/+176
Enable basic fetching from subversion repositories. When processing remote URLs starting with testsvn::, git invokes this remote-helper. It starts svnrdump to extract revisions from the subversion repository in the 'dump file format', and converts them to a git-fast-import stream using the functions of vcs-svn/. Imported refs are created in a private namespace at refs/svn/<remote-name>/master. The revision history is imported linearly (no branch detection) and completely, i.e. from revision 0 to HEAD. The 'bidi-import' capability is used. The remote-helper expects data from fast-import on its stdin. It buffers a batch of 'import' command lines in a string_list before starting to process them. Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com> Acked-by: David Michael Barr <b@rr-dav.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>