| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jk/maint-http-half-auth-push:
http: fix segfault in handle_curl_result
|
|
When we create an http active_request_slot, we can set its
"results" pointer back to local storage. The http code will
fill in the details of how the request went, and we can
access those details even after the slot has been cleaned
up.
Commit 8809703 (http: factor out http error code handling)
switched us from accessing our local results struct directly
to accessing it via the "results" pointer of the slot. That
means we're accessing the slot after it has been marked as
finished, defeating the whole purpose of keeping the results
storage separate.
Most of the time this doesn't matter, as finishing the slot
does not actually clean up the pointer. However, when using
curl's multi interface with the dumb-http revision walker,
we might actually start a new request before handing control
back to the original caller. In that case, we may reuse the
slot, zeroing its results pointer, and leading the original
caller to segfault while looking for its results inside the
slot.
Instead, we need to pass a pointer to our local results
storage to the handle_curl_result function, rather than
relying on the pointer in the slot struct. This matches what
the original code did before the refactoring (which did not
use a separate function, and therefore just accessed the
results struct directly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" over http advertised that it supports "deflate", which
is much less common, and did not advertise more common "gzip" on its
Accept-Encoding header.
* sp/maint-http-enable-gzip:
Enable info/refs gzip decompression in HTTP client
|
|
Some HTTP servers try to use gzip compression on the /info/refs
request to save transfer bandwidth. Repositories with many tags
may find the /info/refs request can be gzipped to be 50% of the
original size due to the few but often repeated bytes used (hex
SHA-1 and commonly digits in tag names).
For most HTTP requests enable "Accept-Encoding: gzip" ensuring
the /info/refs payload can use this encoding format.
Only request gzip encoding from servers. Although deflate is
supported by libcurl, most servers have standardized on gzip
encoding for compression as that is what most browsers support.
Asking for deflate increases request sizes by a few bytes, but is
unlikely to ever be used by a server.
Disable the Accept-Encoding header on probe RPCs as response bodies
are supposed to be exactly 4 bytes long, "0000". The HTTP headers
requesting and indicating compression use more space than the data
transferred in the body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 703e6e76a14825e5b0c960d525f34e607154b4f7.
Retrying without the query parameter was added as a workaround
for a single broken HTTP server at git.debian.org[1]. The server
was misconfigured to route every request with a query parameter
into gitweb.cgi. Admins fixed the server's configuration within
16 hours of the bug report to the Git mailing list, but we still
patched Git with this fallback and have been paying for it since.
Most Git hosting services configure the smart HTTP protocol and the
retry logic confuses users when there is a transient HTTP error as
Git dropped the real error from the smart HTTP request. Removing the
retry makes root causes easier to identify.
[1] http://thread.gmane.org/gmane.comp.version-control.git/137609
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the smart-http GET requests go through the http_get_*
functions, which will prompt for credentials and retry if we
see an HTTP 401.
POST requests, however, do not go through any central point.
Moreover, it is difficult to retry in the general case; we
cannot assume the request body fits in memory or is even
seekable, and we don't know how much of it was consumed
during the attempt.
Most of the time, this is not a big deal; for both fetching
and pushing, we make a GET request before doing any POSTs,
so typically we figure out the credentials during the first
request, then reuse them during the POST. However, some
servers may allow a client to get the list of refs from
receive-pack without authentication, and then require
authentication when the client actually tries to POST the
pack.
This is not ideal, as the client may do a non-trivial amount
of work to generate the pack (e.g., delta-compressing
objects). However, for a long time it has been the
recommended example configuration in git-http-backend(1) for
setting up a repository with anonymous fetch and
authenticated push. This setup has always been broken
without putting a username into the URL. Prior to commit
986bbc0, it did work with a username in the URL, because git
would prompt for credentials before making any requests at
all. However, post-986bbc0, it is totally broken. Since it
has been advertised in the manpage for some time, we should
make sure it works.
Unfortunately, it is not as easy as simply calling post_rpc
again when it fails, due to the input issue mentioned above.
However, we can still make this specific case work by
retrying in two specific instances:
1. If the request is large (bigger than LARGE_PACKET_MAX),
we will first send a probe request with a single flush
packet. Since this request is static, we can freely
retry it.
2. If the request is small and we are not using gzip, then
we have the whole thing in-core, and we can freely
retry.
That means we will not retry in some instances, including:
1. If we are using gzip. However, we only do so when
calling git-upload-pack, so it does not apply to
pushes.
2. If we have a large request, the probe succeeds, but
then the real POST wants authentication. This is an
extremely unlikely configuration and not worth worrying
about.
While it might be nice to cover those instances, doing so
would be significantly more complex for very little
real-world gain. In the long run, we will be much better off
when curl learns to internally handle authentication as a
callback, and we can cleanly handle all cases that way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
|
|
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Conflicts:
t/t5500-fetch-pack.sh
|
|
The send_pack function gets a "progress" flag saying "yes,
definitely show progress" or "no, definitely do not show
progress". This gets set properly by transport_push when
send_pack is called directly.
However, when the send-pack command is executed separately
(as it is for the remote-curl helper), there is no way to
tell it "definitely do this". As a result, we do not
properly respect "git push --no-progress" for smart-http
remotes; you will still get progress if stderr is a tty.
This patch teaches send-pack --progress and --no-progress,
and teaches remote-curl to pass the appropriate option to
override send-pack's isatty check. This fixes the
--no-progress case above, and as a bonus, also makes "git
push --progress" work when stderr is not a tty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we can throw an arbitrary number of refs at fetch-pack using
its --stdin option, we use it in the remote-curl helper to bypass the
OS command line length limit.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/smart-http-failure-to-push:
remote-curl: Fix push status report when all branches fail
|
|
* sp/smart-http-failure-to-push:
remote-curl: Fix push status report when all branches fail
|
|
The protocol between transport-helper.c and remote-curl requires
remote-curl to always print a blank line after the push command
has run. If the blank line is ommitted, transport-helper kills its
container process (the git push the user started) with exit(128)
and no message indicating a problem, assuming the helper already
printed reasonable error text to the console.
However if the remote rejects all branches with "ng" commands in the
report-status reply, send-pack terminates with non-zero status, and
in turn remote-curl exited with non-zero status before outputting
the blank line after the helper status printed by send-pack. No
error messages reach the user.
This caused users to see the following from git push over HTTP
when the remote side's update hook rejected the branch:
$ git push http://... master
Counting objects: 4, done.
Delta compression using up to 6 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 301 bytes, done.
Total 3 (delta 0), reused 0 (delta 0)
$
Always print a blank line after the send-pack process terminates,
ensuring the helper status report (if it was output) will be
correctly parsed by the calling transport-helper.c. This ensures
the helper doesn't abort before the status report can be shown to
the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/http-push-to-empty:
remote-curl: don't pass back fake refs
Conflicts:
remote-curl.c
|
|
* jk/maint-push-over-dav:
http-push: enable "proactive auth"
t5540: test DAV push with authentication
Conflicts:
http.c
|
|
When receive-pack advertises its list of refs, it generally hides the
capabilities information after a NUL at the end of the first ref.
However, when we have an empty repository, there are no refs, and
therefore receive-pack writes a fake ref "capabilities^{}" with the
capabilities afterwards.
On the client side, git reads the result with get_remote_heads(). We pick
the capabilities from the end of the line, and then call check_ref() to
make sure the ref name is valid. We see that it isn't, and don't bother
adding it to our list of refs.
However, the call to check_ref() is enabled by passing the REF_NORMAL flag
to get_remote_heads. For the regular git transport, we pass REF_NORMAL in
get_refs_via_connect() if we are doing a push (since only receive-pack
uses this fake ref). But in remote-curl, we never use this flag, and we
accept the fake ref as a real one, passing it back from the helper to the
parent git-push.
Most of the time this bug goes unnoticed, as the fake ref won't match our
refspecs. However, if "--mirror" is used, then we see it as remote cruft
to be pruned, and try to pass along a deletion refspec for it. Of course
this refspec has bogus syntax (because of the ^{}), and the helper
complains, aborting the push.
Let's have remote-curl mirror what the builtin get_refs_via_connect() does
(at least for the case of using git protocol; we can leave the dumb
info/refs reader as it is).
This also fixes pushing with --mirror to a smart-http remote that uses
alternates. The fake ".have" refs the server gives to avoid unnecessary
network transfer has a similar bad interactions with the machinery.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before commit 986bbc08, git was proactive about asking for
http passwords. It assumed that if you had a username in
your URL, you would also want a password, and asked for it
before making any http requests.
However, this could interfere with the use of .netrc (see
986bbc08 for details). And it was also unnecessary, since
the http fetching code had learned to recognize an HTTP 401
and prompt the user then. Furthermore, the proactive prompt
could interfere with the usage of .netrc (see 986bbc08 for
details).
Unfortunately, the http push-over-DAV code never learned to
recognize HTTP 401, and so was broken by this change. This
patch does a quick fix of re-enabling the "proactive auth"
strategy only for http-push, leaving the dumb http fetch and
smart-http as-is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_remote_heads function reads the list of remote refs
during git protocol session. It dates all the way back to
def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04).
At that time, the idea was to come up with a list of refs we
were interested in, and then filter the list as we got it
from the remote side.
Later, 1baaae5 (Make maximal use of the remote refs,
2005-10-28) stopped filtering at the get_remote_heads layer,
letting us use the non-matching refs to find common history.
As a result, all callers now simply pass an empty match
list (and any future callers will want to do the same). So
let's drop these now-useless parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/http-auth:
http_init: accept separate URL parameter
http: use hostname in credential description
http: retry authentication failures for all http requests
remote-curl: don't retry auth failures with dumb protocol
improve httpd auth tests
url: decode buffers that are not NUL-terminated
|
|
The http_init function takes a "struct remote". Part of its
initialization procedure is to look at the remote's url and
grab some auth-related parameters. However, using the url
included in the remote is:
- wrong; the remote-curl helper may have a separate,
unrelated URL (e.g., from remote.*.pushurl). Looking at
the remote's configured url is incorrect.
- incomplete; http-fetch doesn't have a remote, so passes
NULL. So http_init never gets to see the URL we are
actually going to use.
- cumbersome; http-push has a similar problem to
http-fetch, but actually builds a fake remote just to
pass in the URL.
Instead, let's just add a separate URL parameter to
http_init, and all three callsites can pass in the
appropriate information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/smart-http-failure:
remote-curl: Fix warning after HTTP failure
|
|
If the HTTP connection is broken in the middle of a fetch or clone
body, the client presented a useless error message due to part of
the upload-pack->remote-curl pkt-line protocol leaking out of the
helper as the helper's "fetch result":
error: RPC failed; result=18, HTTP code = 200
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: unpack-objects failed
warning: https unexpectedly said: '0000'
Instead when the HTTP RPC fails discard all remaining data from
upload-pack and report nothing to the transport helper. Errors
were already sent to stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit ffa69e61d3c5730bd4b65a465efc130b0ef3c7df, reversing
changes made to 4a13c4d14841343d7caad6ed41a152fee550261d.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
|
|
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
|
|
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
|
|
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
|
|
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
Add the --quiet option to send-pack/receive-pack and pass it to
unpack-objects in the receive-pack codepath and to receive-pack in
the push codepath.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
doc/fast-import: clarify notemodify command
Documentation: minor grammatical fix in rev-list-options.txt
Documentation: git-filter-branch honors replacement refs
remote-curl: Add a format check to parsing of info/refs
git-config: Remove extra whitespaces
|
|
When parsing info/refs, no checks were applied that the file was in
the requried format. Since the file is read from a remote webserver,
this isn't guarenteed to be true. Add a check that the file at least
only contains lines that consist of 40 characters followed by a tab
and then the ref name.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching an http URL, we first try fetching info/refs
with an extra "service" parameter. This will work for a
smart-http server, or a dumb server which ignores extra
parameters when fetching files. If that fails, we retry
without the extra parameter to remain compatible with dumb
servers which didn't like our first request.
If the server returned a "401 Unauthorized", indicating that
the credentials we provided were not good, there is not much
point in retrying. With the current code, we just waste an
extra round trip to the HTTP server before failing.
But as the http code becomes smarter about throwing away
rejected credentials and re-prompting the user for new ones
(which it will later in this series), this will become more
confusing. At some point we will stop asking for credentials
to retry smart http, and will be asking for credentials to
retry dumb http. So now we're not only wasting an extra HTTP
round trip for something that is unlikely to work, but we're
making the user re-type their password for it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This went unnoticed because the transport helper infrastructore did
not check the return value of the helper, nor did the helper print
anything before exiting.
While at it also make sure that the stream doesn't end unexpectedly.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
|
|
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Yes, these don't match perfectly with the void* first parameter of the
fread/fwrite in the standard library, but they do match the curl
expected method signature. This is needed when a refactor passes a
curl_write_callback around, which would otherwise give incorrect
parameter warnings.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-smart-http-sans-100-continue:
smart-http: Really never use Expect: 100-continue
|
|
libcurl may choose to try and use Expect: 100-continue for
any type of POST, not just a Transfer: chunked-encoding type.
Force it to disable this feature, as not all proxy servers support
100-continue and leaving it enabled can cause 1 second stalls during
the negotiation phase of fetch-pack/upload-pack.
In ("206b099d26 smart-http: Don't use Expect: 100-Continue") we
tried to disable this for only large POST bodies, but it should be
disabled for every POST body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-smart-http-sans-100-continue:
smart-http: Don't use Expect: 100-Continue
|
|
Some HTTP/1.1 servers or proxies don't correctly implement the
100-Continue feature of HTTP/1.1. Its a difficult feature to
implement right, and isn't commonly used by browsers, so many
developers may not even be aware that their server (or proxy)
doesn't honor it.
Within the smart HTTP protocol for Git we only use this newer
"Expect: 100-Continue" feature to probe for missing authentication
before uploading a large payload like a pack file during push.
If authentication is necessary, we expect the server to send the
401 Not Authorized response before the bulk data transfer starts,
thus saving the client bandwidth during the retry.
A different method to probe for working authentication is to send an
empty command list (that is just "0000") to $URL/git-receive-pack.
or $URL/git-upload-pack. All versions of both receive-pack and
upload-pack since the introduction of smart HTTP in Git 1.6.6
cleanly accept just a flush-pkt under --stateless-rpc mode, and
exit with success.
If HTTP level authentication is successful, the backend will return
an empty response, but with HTTP status code 200. This enables
the client to continue with the transfer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/fix-smart-http-deadlock-on-error:
smart-http: Don't deadlock on server failure
|
|
If the remote HTTP server fails (e.g. returns 404 or 500) when we
posted the RPC to it, we won't have sent anything to the background
Git process that is supposed to handle the stream. Because we
didn't send anything, its waiting for input from remote-curl, and
remote-curl cannot read its response payload because doing so would
lead to a deadlock.
Send the background task EOF on its input before we try to read
its response back, that way it will break out of its read loop
and terminate.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
|
|
Previously, we blindly assumed that URLs passed to the remote-curl
helper did not end with a trailing slash.
Use the convenience function end_url_with_slash() from http.[ch] to
ensure that URLs have a trailing slash on invocation of the remote-curl
helper, and use the URL as one with a trailing slash throughout.
It is possible for users to pass a URL with a trailing slash to
remote-curl, by, say, setting it in remote.<name>.url in their git
config. The resulting requests have an empty path component (//) and may
break implementations of the http git protocol.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an HTTP request returns a 401, Git will currently fail with a
confusing message saying that it got a 401, which is not very
descriptive.
Currently if a user wants to use Git over HTTP, they have to use one
URL with the username in the URL (e.g. "http://user@host.com/repo.git")
for write access and another without the username for unauthenticated
read access (unless they want to be prompted for the password each
time). However, since the HTTP servers will return a 401 if an action
requires authentication, we can prompt for username and password if we
see this, allowing us to use a single URL for both purposes.
This patch changes http_request to prompt for the username and password,
then return HTTP_REAUTH so http_get_strbuf can try again. If it gets
a 401 even when a user/pass is supplied, http_request will now return
HTTP_NOAUTH which remote_curl can then use to display a more
intelligent error message that is less confusing.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tc/http-cleanup:
remote-curl: init walker only when needed
remote-curl: use http_fetch_ref() instead of walker wrapper
http: init and cleanup separately from http-walker
http-walker: cleanup more thoroughly
http-push: remove "|| 1" to enable verbose check
t554[01]-http-push: refactor, add non-ff tests
t5541-http-push: check that ref is unchanged for non-ff test
|
Junio C Hamano
Jeff King
Shawn O. Pearce
Ivan Todoroski
Clemens Buchacher
Julian Phillips
Sverre Rabbelier
Jim Meyering
Dan McGee
Tay Ray Chuan
Scott Chacon