| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git http-fetch" (deprecated) had an optional and experimental
"feature" to fetch only commits and/or trees, which nobody used.
This has been removed.
* ma/http-walker-no-partial:
walker: drop fields of `struct walker` which are always 1
http-fetch: make `-a` standard behaviour
|
|
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
After the previous commit, both users of `struct walker` set `get_tree`,
`get_history` and `get_all` to 1. Drop those fields and simplify the
walker implementation accordingly.
Let's hope that any out-of-tree users will not mind this change. They
should notice that the compilation fails as they try to set these
fields. (If they do not set them, note that `get_http_walker()` leaves
them undefined, so the behavior will have been undefined all the time.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
|
|
In order to be able to ship protocol v2 with only supporting fetch, we
need clients to not issue a request to use protocol v2 when pushing
(since the client currently doesn't know how to push using protocol v2).
This allows a client to have protocol v2 configured in
`protocol.version` and take advantage of using v2 for fetch and falling
back to using v0 when pushing while v2 for push is being designed.
We could run into issues if we didn't fall back to protocol v2 when
pushing right now. This is because currently a server will ignore a request to
use v2 when contacting the 'receive-pack' endpoint and fall back to
using v0, but when push v2 is rolled out to servers, the 'receive-pack'
endpoint will start responding using v2. So we don't want to get into a
state where a client is requesting to push with v2 before they actually
know how to push using v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach remote-curl the 'stateless-connect' command which is used to
establish a stateless connection with servers which support protocol
version 2. This allows remote-curl to act as a proxy, allowing the git
client to communicate natively with a remote end, simply using
remote-curl as a pass through to convert requests to http.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an http info/refs request is made, requesting that protocol v2 be
used, don't send a "# service" line since this line is not part of the
v2 spec.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of always sending the Git-Protocol header with the configured
version with every http request, explicitly send it when discovering
refs and then only send it on subsequent http requests if the server
understood the version requested.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Store the protocol version the server responded with when performing
discovery. This will be used in a future patch to either change the
'Git-Protocol' header sent in subsequent requests or to determine if a
client needs to fallback to using a different protocol version.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make a copy of the service name being requested instead of relying on
the buffer pointed to by the passed in 'const char *' to remain
unchanged.
Currently, all service names are string constants, but a subsequent
patch will introduce service names from external sources.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce protocol_v2, a new value for 'enum protocol_version'.
Subsequent patches will fill in the implementation of protocol_v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to prepare for the addition of protocol_v2 push the protocol
version discovery outside of 'get_remote_heads()'. This will allow for
keeping the logic for processing the reference advertisement for
protocol_v1 and protocol_v0 separate from the logic for protocol_v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" over http transport did not unquote the push-options
correctly.
* jk/push-options-via-transport-fix:
remote-curl: unquote incoming push-options
t5545: factor out http repository setup
|
|
Some low level protocol codepath could crash when they get an
unexpected flush packet, which is now fixed.
* js/packet-read-line-check-null:
always check for NULL return from packet_read_line()
correct error messages for NULL packet_read_line()
|
|
The transport-helper protocol c-style quotes the value of
any options passed to the helper via the "option <key> <value>"
directive. However, remote-curl doesn't actually unquote the
push-option values, meaning that we will send the quoted
version to the other side (whereas git-over-ssh would send
the raw value).
The pack-protocol.txt documentation defines the push-options
as a series of VCHARs, which excludes most characters that
would need quoting. But:
1. You can still see the bug with a valid push-option that
starts with a double-quote (since that triggers
quoting).
2. We do currently handle any non-NUL characters correctly
in git-over-ssh. So even though the spec does not say
that we need to handle most quoted characters, it's
nice if our behavior is consistent between protocols.
There are two new tests: the "direct" one shows that this
already works in the non-http case, and the http one covers
this bugfix.
Reported-by: Jon Simons <jon@jonsimons.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The packet_read_line() function will die if it sees any
protocol or socket errors. But it will return NULL for a
flush packet; some callers which are not expecting this may
dereference NULL if they get an unexpected flush. This would
involve the other side breaking protocol, but we should
flag the error rather than segfault.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach fetch to support filters. This is only allowed for the remote
configured in extensions.partialcloneremote.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce fetch-object, providing the ability to fetch one object from a
promisor remote.
This uses fetch-pack. To do this, the transport mechanism has been
updated with 2 flags, "from-promisor" to indicate that the resulting
pack comes from a promisor remote (and thus should be annotated as such
by index-pack), and "no-dependents" to indicate that only the objects
themselves need to be fetched (but fetching additional objects is
nevertheless safe).
Whenever "no-dependents" is used, fetch-pack will refrain from using any
object flags, because it is most likely invoked as part of a dynamic
object fetch by another Git command (which may itself use object flags).
An alternative to this is to leave fetch-pack alone, and instead update
the allocation of flags so that fetch-pack's flags never overlap with
any others, but this will end up shrinking the number of flags available
to nearly every other Git command (that is, every Git command that
accesses objects), so the approach in this commit was used instead.
This will be tested in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow the http.postbuffer configuration variable to be set to a
size that can be expressed in size_t, which can be larger than
ulong on some platforms.
* dt/http-postbuffer-can-be-large:
http.postbuffer: allow full range of ssize_t values
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
|
Unfortunately, in order to push some large repos where a server does
not support chunked encoding, the http postbuffer must sometimes
exceed two gigabytes. On a 64-bit system, this is OK: we just malloc
a larger buffer.
This means that we need to use CURLOPT_POSTFIELDSIZE_LARGE to set the
buffer size.
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the internal storage for struct sha1_array use an array of struct
object_id internally. Update the users of this struct which inspect its
internals.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach remote-curl to understand push options and to be able to convey
them across HTTP.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
|
|
Transport with dumb http can be fooled into following foreign URLs
that the end user does not intend to, especially with the server
side redirects and http-alternates mechanism, which can lead to
security issues. Tighten the redirection and make it more obvious
to the end user when it happens.
* jk/http-walker-limit-redirect-2.9:
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
|
|
We instruct curl to always follow HTTP redirects. This is
convenient, but it creates opportunities for malicious
servers to create confusing situations. For instance,
imagine Alice is a git user with access to a private
repository on Bob's server. Mallory runs her own server and
wants to access objects from Bob's repository.
Mallory may try a few tricks that involve asking Alice to
clone from her, build on top, and then push the result:
1. Mallory may simply redirect all fetch requests to Bob's
server. Git will transparently follow those redirects
and fetch Bob's history, which Alice may believe she
got from Mallory. The subsequent push seems like it is
just feeding Mallory back her own objects, but is
actually leaking Bob's objects. There is nothing in
git's output to indicate that Bob's repository was
involved at all.
The downside (for Mallory) of this attack is that Alice
will have received Bob's entire repository, and is
likely to notice that when building on top of it.
2. If Mallory happens to know the sha1 of some object X in
Bob's repository, she can instead build her own history
that references that object. She then runs a dumb http
server, and Alice's client will fetch each object
individually. When it asks for X, Mallory redirects her
to Bob's server. The end result is that Alice obtains
objects from Bob, but they may be buried deep in
history. Alice is less likely to notice.
Both of these attacks are fairly hard to pull off. There's a
social component in getting Mallory to convince Alice to
work with her. Alice may be prompted for credentials in
accessing Bob's repository (but not always, if she is using
a credential helper that caches). Attack (1) requires a
certain amount of obliviousness on Alice's part while making
a new commit. Attack (2) requires that Mallory knows a sha1
in Bob's repository, that Bob's server supports dumb http,
and that the object in question is loose on Bob's server.
But we can probably make things a bit more obvious without
any loss of functionality. This patch does two things to
that end.
First, when we encounter a whole-repo redirect during the
initial ref discovery, we now inform the user on stderr,
making attack (1) much more obvious.
Second, the decision to follow redirects is now
configurable. The truly paranoid can set the new
http.followRedirects to false to avoid any redirection
entirely. But for a more practical default, we will disallow
redirects only after the initial ref discovery. This is
enough to thwart attacks similar to (2), while still
allowing the common use of redirects at the repository
level. Since c93c92f30 (http: update base URLs when we see
redirects, 2013-09-28) we re-root all further requests from
the redirect destination, which should generally mean that
no further redirection is necessary.
As an escape hatch, in case there really is a server that
needs to redirect individual requests, the user can set
http.followRedirects to "true" (and this can be done on a
per-server basis via http.*.followRedirects config).
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The discover_refs() function has a local "options" variable
to hold the http_get_options we pass to http_get_strbuf().
But this shadows the global "struct options" that holds our
program-level options, which cannot be accessed from this
function.
Let's give the local one a more descriptive name so we can
tell the two apart.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the event that a HTTP server closes the connection after giving a
200 but before giving any packets, we don't want to hang forever
waiting for a response that will never come. Instead, we should die
immediately.
One case where this happens is when attempting to fetch a dangling
object by its object name. In this case, the server dies before
sending any data. Prior to this patch, fetch-pack would wait for
data from the server, and remote-curl would wait for fetch-pack,
causing a deadlock.
Despite this patch, there is other possible malformed input that could
cause the same deadlock (e.g. a half-finished pktline, or a pktline but
no trailing flush). There are a few possible solutions to this:
1. Allowing remote-curl to tell fetch-pack about the EOF (so that
fetch-pack could know that no more data is coming until it says
something else). This is tricky because an out-of-band signal would
be required, or the http response would have to be re-framed inside
another layer of pkt-line or something.
2. Make remote-curl understand some of the protocol. It turns out
that in addition to understanding pkt-line, it would need to watch for
ack/nak. This is somewhat fragile, as information about the protocol
would end up in two places. Also, pkt-lines which are already at the
length limit would need special handling.
Both of these solutions would require a fair amount of work, whereas
this hack is easy and solves at least some of the problem.
Still to do: it would be good to give a better error message
than "fatal: The remote end hung up unexpectedly".
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
|
|
* jk/common-main-2.8:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
|
|
This should be part of every program, as otherwise users do
not get translated error messages. However, some external
commands forgot to do so (e.g., git-credential-store). This
fixes them, and eliminates the repeated code in programs
that did remember to use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every program which links against libgit.a must call this
function, or risk hitting an assert() in system_path() that
checks whether we have configured argv0_path (though only
when RUNTIME_PREFIX is defined, so essentially only on
Windows).
Looking at the diff, you can see that putting it into the
common main() saves us having to do it individually in each
of the external commands. But what you can't see are the
cases where we _should_ have been doing so, but weren't
(e.g., git-credential-store, and all of the t/helper test
programs).
This has been an accident-waiting-to-happen for a long time,
but wasn't triggered until recently because it involves one
of those programs actually calling system_path(). That
happened with git-credential-store in v2.8.0 with ae5f677
(lazily load core.sharedrepository, 2016-03-11). The
program:
- takes a lock file, which...
- opens a tempfile, which...
- calls adjust_shared_perm to fix permissions, which...
- lazy-loads the config (as of ae5f677), which...
- calls system_path() to find the location of
/etc/gitconfig
On systems with RUNTIME_PREFIX, this means credential-store
reliably hits that assert() and cannot be used.
We never noticed in the test suite, because we set
GIT_CONFIG_NOSYSTEM there, which skips the system_path()
lookup entirely. But if we were to tweak git_config() to
find /etc/gitconfig even when we aren't going to open it,
then the test suite shows multiple failures (for
credential-store, and for some other test helpers). I didn't
include that tweak here because it's way too specific to
this particular call to be worth carrying around what is
essentially dead code.
The implementation is fairly straightforward, with one
exception: there is exactly one caller (git.c) that actually
cares about the result of the function, and not the
side-effect of setting up argv0_path. We can accommodate
that by simply replacing the value of argv[0] in the array
we hand down to cmd_main().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are certain startup tasks that we expect every git
process to do. In some cases this is just to improve the
quality of the program (e.g., setting up gettext()). In
others it is a requirement for using certain functions in
libgit.a (e.g., system_path() expects that you have called
git_extract_argv0_path()).
Most commands are builtins and are covered by the git.c
version of main(). However, there are still a few external
commands that use their own main(). Each of these has to
remember to include the correct startup sequence, and we are
not always consistent.
Rather than just fix the inconsistencies, let's make this
harder to get wrong by providing a common main() that can
run this standard startup.
We basically have two options to do this:
- the compat/mingw.h file already does something like this by
adding a #define that replaces the definition of main with a
wrapper that calls mingw_startup().
The upside is that the code in each program doesn't need
to be changed at all; it's rewritten on the fly by the
preprocessor.
The downside is that it may make debugging of the startup
sequence a bit more confusing, as the preprocessor is
quietly inserting new code.
- the builtin functions are all of the form cmd_foo(),
and git.c's main() calls them.
This is much more explicit, which may make things more
obvious to somebody reading the code. It's also more
flexible (because of course we have to figure out _which_
cmd_foo() to call).
The downside is that each of the builtins must define
cmd_foo(), instead of just main().
This patch chooses the latter option, preferring the more
explicit approach, even though it is more invasive. We
introduce a new file common-main.c, with the "real" main. It
expects to call cmd_main() from whatever other objects it is
linked against.
We link common-main.o against anything that links against
libgit.a, since we know that such programs will need to do
this setup. Note that common-main.o can't actually go inside
libgit.a, as the linker would not pick up its main()
function automatically (it has no callers).
The rest of the patch is just adjusting all of the various
external programs (mostly in t/helper) to use cmd_main().
I've provided a global declaration for cmd_main(), which
means that all of the programs also need to match its
signature. In particular, many functions need to switch to
"const char **" instead of "char **" for argv. This effect
ripples out to a few other variables and functions, as well.
This makes the patch even more invasive, but the end result
is much better. We should be treating argv strings as const
anyway, and now all programs conform to the same signature
(which also matches the way builtins are defined).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-fetch, --depth argument is always relative with the latest
remote refs. This makes it a bit difficult to cover this use case,
where the user wants to make the shallow history, say 3 levels
deeper. It would work if remote refs have not moved yet, but nobody
can guarantee that, especially when that use case is performed a
couple months after the last clone or "git fetch --depth". Also,
modifying shallow boundary using --depth does not work well with
clones created by --since or --not.
This patch fixes that. A new argument --deepen=<N> will add <N> more (*)
parent commits to the current history regardless of where remote refs
are.
Have/Want negotiation is still respected. So if remote refs move, the
server will send two chunks: one between "have" and "want" and another
to extend shallow history. In theory, the client could send no "want"s
in order to get the second chunk only. But the protocol does not allow
that. Either you send no want lines, which means ls-remote; or you
have to send at least one want line that carries deep-relative to the
server..
The main work was done by Dongcan Jiang. I fixed it up here and there.
And of course all the bugs belong to me.
(*) We could even support --deepen=<N> where <N> is negative. In that
case we can cut some history from the shallow clone. This operation
(and --depth=<shorter depth>) does not require interaction with remote
side (and more complicated to implement as a result).
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We introduce a way to send custom HTTP headers with all requests.
This allows us, for example, to send an extra token from build agents
for temporary access to private repositories. (This is the use case that
triggered this patch.)
This feature can be used like this:
git -c http.extraheader='Secret: sssh!' fetch $URL $REF
Note that `curl_easy_setopt(..., CURLOPT_HTTPHEADER, ...)` takes only
a single list, overriding any previous call. This means we have to
collect _all_ of the headers we want to use into a single list, and
feed it to cURL in one shot. Since we already unconditionally set a
"pragma" header when initializing the curl handles, we can add our new
headers to that list.
For callers which override the default header list (like probe_rpc),
we provide `http_copy_default_headers()` so they can do the same
trick.
Big thanks to Jeff King and Junio Hamano for their outstanding help and
patient reviews.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
|
|
Help those who debug http(s) part of the system.
* sp/remote-curl-ssl-strerror:
remote-curl: include curl_errorstr on SSL setup failures
|
|
"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
|
|
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many manual argv allocations that predate the
argv_array API. Switching to that API brings a few
advantages:
1. We no longer have to manually compute the correct final
array size (so it's one less thing we can screw up).
2. In many cases we had to make a separate pass to count,
then allocate, then fill in the array. Now we can do it
in one pass, making the code shorter and easier to
follow.
3. argv_array handles memory ownership for us, making it
more obvious when things should be free()d and and when
not.
Most of these cases are pretty straightforward. In some, we
switch from "run_command_v" to "run_command" which lets us
directly use the argv_array embedded in "struct
child_process".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For curl error 35 (CURLE_SSL_CONNECT_ERROR) users need the
additional text stored in CURLOPT_ERRORBUFFER to debug why
the connection did not start. This is curl_errorstr inside
of http.c, so include that in the message if it is non-empty.
Sometimes HTTP response codes aren't yet available, such as
when the SSL setup fails. Don't include HTTP 0 in the message.
Signed-off-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the parse_fetch function to use struct object_id. Remove the
strlen check as get_oid_hex will fail safely on receiving a too-short
NUL-terminated string.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
Junio C Hamano
Martin Ågren
Stefan Beller
Brandon Williams
Jeff King
Jon Simons
Jeff Hostetler
Jonathan Tan
David Turner
brian m. carlson
Nguyễn Thái Ngọc Duy
Johannes Schindelin
Shawn Pearce
Eric Wong