| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The code to acquire a lock on a reference (e.g. while accepting a
push from a client) used to immediately fail when the reference is
already locked---now it waits for a very short while and retries,
which can make it succeed if the lock holder was holding it during
a read-only operation.
* mh/ref-lock-entry:
refs: retry acquiring reference locks for 100ms
|
|
The philosophy of reference locking has been, "if another process is
changing a reference, then whatever I'm trying to do to it will
probably fail anyway because my old-SHA-1 value is probably no longer
current". But this argument falls down if the other process has locked
the reference to do something that doesn't actually change the value
of the reference, such as `pack-refs` or `reflog expire`. There
actually *is* a decent chance that a planned reference update will
still be able to go through after the other process has released the
lock.
So when trying to lock an individual reference (e.g., when creating
"refs/heads/master.lock"), if it is already locked, then retry the
lock acquisition for approximately 100 ms before giving up. This
should eliminate some unnecessary lock conflicts without wasting a lot
of time.
Add a configuration setting, `core.filesRefLockTimeout`, to allow this
setting to be tweaked.
Note: the function `get_files_ref_lock_timeout_ms()` cannot be private
to the files backend because it is also used by `write_pseudoref()`
and `delete_pseudoref()`, which are defined in `refs.c` so that they
can be used by other reference backends.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "ref-store" code reorganization continues.
* mh/packed-ref-store: (32 commits)
files-backend: cheapen refname_available check when locking refs
packed_ref_store: handle a packed-refs file that is a symlink
read_packed_refs(): die if `packed-refs` contains bogus data
t3210: add some tests of bogus packed-refs file contents
repack_without_refs(): don't lock or unlock the packed refs
commit_packed_refs(): remove call to `packed_refs_unlock()`
clear_packed_ref_cache(): don't protest if the lock is held
packed_refs_unlock(), packed_refs_is_locked(): new functions
packed_refs_lock(): report errors via a `struct strbuf *err`
packed_refs_lock(): function renamed from lock_packed_refs()
commit_packed_refs(): use a staging file separate from the lockfile
commit_packed_refs(): report errors rather than dying
packed_ref_store: make class into a subclass of `ref_store`
packed-backend: new module for handling packed references
packed_read_raw_ref(): new function, replacing `resolve_packed_ref()`
packed_ref_store: support iteration
packed_peel_ref(): new function, extracted from `files_peel_ref()`
repack_without_refs(): take a `packed_ref_store *` parameter
get_packed_ref(): take a `packed_ref_store *` parameter
rollback_packed_refs(): take a `packed_ref_store *` parameter
...
|
|
When locking references in preparation for updating them, we need to
check that none of the newly added references D/F conflict with
existing references (e.g., we don't allow `refs/foo` to be added if
`refs/foo/bar` already exists, or vice versa).
Prior to 524a9fdb51 (refs_verify_refname_available(): use function in
more places, 2017-04-16), conflicts with existing loose references
were checked by looking directly in the filesystem, and then conflicts
with existing packed references were checked by running
`verify_refname_available_dir()` against the packed-refs cache.
But that commit changed the final check to call
`refs_verify_refname_available()` against the *whole* files ref-store,
including both loose and packed references, with the following
comment:
> This means that those callsites now check for conflicts with all
> references rather than just packed refs, but the performance cost
> shouldn't be significant (and will be regained later).
That comment turned out to be too sanguine. User s@kazlauskas.me
reported that fetches involving a very large number of references in
neighboring directories were slowed down by that change.
The problem is that when fetching, each reference is updated
individually, within its own reference transaction. This is done
because some reference updates might succeed even though others fail.
But every time a reference update transaction is finished,
`clear_loose_ref_cache()` is called. So when it is time to update the
next reference, part of the loose ref cache has to be repopulated for
the `refs_verify_refname_available()` call. If the references are all
in neighboring directories, then the cost of repopulating the
reference cache increases with the number of references, resulting in
O(N²) effort.
The comment above also claims that the performance cost "will be
regained later". The idea was that once the packed-refs were finished
being split out into a separate ref-store, we could limit the
`refs_verify_refname_available()` call to the packed references again.
That is what we do now.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the tricks that `contrib/workdir/git-new-workdir` plays is to
making `packed-refs` in the new workdir a symlink to the `packed-refs`
file in the original repository. Before
42dfa7ecef ("commit_packed_refs(): use a staging file separate from
the lockfile", 2017-06-23), a lockfile was used as the staging file,
and because the `LOCK_NO_DEREF` was not used, the pointed-to file was
locked and modified.
But after that commit, the staging file was created using a tempfile,
with the end result that rewriting the `packed-refs` file in the
workdir overwrote the symlink rather than the original `packed-refs`
file.
Change `commit_packed_refs()` to use `get_locked_file_path()` to find
the path of the file that it should overwrite. Since that path was
properly resolved when the lockfile was created, this restores the
pre-42dfa7ecef behavior.
Also add a test case to document this use case and prevent a
regression like this from recurring.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old code ignored any lines that it didn't understand, including
unterminated lines. This is dangerous. Instead, `die()` if the
`packed-refs` file contains any unterminated lines or lines that we
don't know how to handle.
This fixes the tests added in the last commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change `repack_without_refs()` to expect the packed-refs lock to be
held already, and not to release the lock before returning. Change the
callers to deal with lock management.
This change makes it possible for callers to hold the packed-refs lock
for a longer span of time, a possibility that will eventually make it
possible to fix some longstanding races.
The only semantic change here is that `repack_without_refs()` used to
forget to release the lock in the `if (!removed)` exit path. That
omission is now fixed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bugfix for a topic that is (only) in 'master'.
* mh/packed-ref-store-prep:
for_each_bisect_ref(): don't trim refnames
lock_packed_refs(): fix cache validity check
|
|
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Instead, change the callers of `commit_packed_refs()` to call
`packed_refs_unlock()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing callers already check that the lock isn't held just
before calling `clear_packed_ref_cache()`, and in the near future we
want to be able to call this function when the lock is held.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add two new public functions, `packed_refs_unlock()` and
`packed_refs_is_locked()`, with which callers can manage and query the
`packed-refs` lock externally.
Call `packed_refs_unlock()` from `commit_packed_refs()` and
`rollback_packed_refs()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That way the callers don't have to come up with error messages
themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `lock_packed_refs()` to `packed_refs_lock()` for consistency
with how other methods are named. Also, it's about to get some
companions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will want to be able to hold the lockfile for `packed-refs` even
after we have activated the new values. So use a separate tempfile,
`packed-refs.new`, as a place to stage the new contents of the
`packed-refs` file. For now this is all done within
`commit_packed_refs()`, but that will change shortly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Report errors via a `struct strbuf *err` rather than by calling
`die()`. To enable this goal, change `write_packed_entry()` to report
errors via a return value and `errno` rather than dying.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the infrastructure to make `packed_ref_store` implement
`ref_store`, at least formally (few of the methods are actually
implemented yet). Change the functions in its interface to take
`ref_store *` arguments. Change `files_ref_store` to store a pointer
to `ref_store *` and to call functions via the virtual `ref_store`
interface where possible. This also means that a few
`packed_ref_store` functions can become static.
This is a work in progress. Some more `ref_store` methods will soon be
implemented (e.g., those having to do with reference transactions).
But some of them will never be implemented (e.g., those having to do
with symrefs or reflogs).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the interface between `files_ref_store` and
`packed_ref_store` is relatively narrow, move the latter into a new
module, "refs/packed-backend.h" and "refs/packed-backend.c". It still
doesn't quite implement the `ref_store` interface, but it will soon.
This commit moves code around and adjusts its visibility, but doesn't
change anything.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new function, `packed_read_raw_ref()`, which is nearly a
`read_raw_ref_fn`. Use it in place of `resolve_packed_ref()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the infrastructure to iterate over a `packed_ref_store`. It's a
lot of boilerplate, but it's all part of a campaign to make
`packed_ref_store` implement `ref_store`. In the future, this iterator
will work much differently.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will later become a method of `packed_ref_store`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It only cares about the packed-refs part of the reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the `packed_refs_lock` member from `files_ref_store` to
`packed_ref_store`, and rename it to `lock` since it's now more
obvious what it is locking.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move `packed_refs_path` from `files_ref_store` to `packed_ref_store`,
and rename it to `path` since its meaning is clear from its new
context.
Inline `files_packed_refs_path()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start extracting the packed-refs-related data structures into a new
class, `packed_ref_store`. It doesn't yet implement `ref_store`, but
it will.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach `add_packed_ref()` to overwrite an existing entry if one already
exists for the specified `refname`. This means that we can call it
from `files_pack_refs()`, thereby reducing the amount that the latter
function needs to know about the internals of packed-reference
handling.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 28ed9830b1 (get_packed_ref_cache(): assume "packed-refs" won't
change while locked, 2017-05-22) assumes that the "packed-refs" file
cannot change while we hold the lock. That assumption is
justified *if* the lock has been held the whole time since the
"packed-refs" file was last read.
But in `lock_packed_refs()`, we ourselves lock the "packed-refs" file
and then call `get_packed_ref_cache()` to ensure that the cache agrees
with the file. The intent is to guard against the possibility that
another process changed the "packed-refs" file the moment before we
locked it.
This check was defeated because `get_packed_ref_cache()` saw that the
file was locked, and therefore didn't do the `stat_validity_check()`
that we want.
The mistake was compounded with a misleading comment in
`lock_packed_refs()` claiming that it was doing the right thing. That
comment came from an earlier draft of the mh/packed-ref-store-prep
patch series when the commits were in a different order.
So instead:
* Extract a function `validate_packed_ref_cache()` that does the
validity check independent of whether the lock is held.
* Change `get_packed_ref_cache()` to call the new function, but only
if the lock *isn't* held.
* Change `lock_packed_refs()` to call the new function in any case
before calling `get_packed_ref_cache()`.
* Fix the comment in `lock_packed_refs()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When iterating over references, reference priming is used to make sure
that loose references are read into the ref-cache before packed
references, to avoid races. It used to be that the prefix passed to
reference iterators almost always ended in `/`, for example
`refs/heads/`. In that case, the priming code would read all loose
references under `find_containing_dir("refs/heads/")`, which is
"refs/heads/". That's just what we want.
But now that `ref-filter` knows how to pass refname prefixes to
`for_each_fullref_in()`, the prefix might come from user input; for
example,
git for-each-ref refs/heads
Since the argument doesn't include a trailing slash, the reference
iteration code would prime all of the loose references under
`find_containing_dir("refs/heads")`, which is "refs/". Thus we would
unnecessarily read tags, remote-tracking references, etc., when the
user is only interested in branches.
It is a bit awkward to get around this problem. We can't just append a
slash to the argument, because we don't know ab initio whether an
argument like `refs/tags/release` corresponds to a single tag or to a
directory containing tags.
Moreover, until now a `prefix_ref_iterator` was used to make the final
decision about which references fall within the prefix (the
`cache_ref_iterator` only did a rough cut). This is also inefficient,
because the `prefix_ref_iterator` can't know, for example, that while
you are in a subdirectory that is completely within the prefix, you
don't have to do the prefix check.
So:
* Move the responsibility for doing the prefix check directly to
`cache_ref_iterator`. This means that `cache_ref_iterator_begin()`
never has to wrap its return value in a `prefix_ref_iterator`.
* Teach `cache_ref_iterator_begin()` (and `prime_ref_dir()`) to be
stricter about what they iterate over and what directories they
prime.
* Teach `cache_ref_iterator` to keep track of whether the current
`cache_ref_iterator_level` is fully within the prefix. If so, skip
the prefix checks entirely.
The main benefit of these optimizations is for loose references, since
packed references are always read all at once.
Note that after this change, `prefix_ref_iterator` is only ever used
for its trimming feature and not for its "prefix" feature. But I'm not
ripping out the latter yet, because it might be useful for another
patch series that I'm working on.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only one caller was using it, so move the check to that caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of handling `GIT_REF_PARANOIA` in
`files_ref_iterator_begin()`, handle it in
`refs_ref_iterator_begin()`, where it will cover all reference stores.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old code ignored any errors encountered when trying to fopen the
"packed-refs" file, treating all such failures as if the file didn't
exist. But it could be that there is some other error opening the
file (e.g., permissions problems), and we don't want to silently
ignore such problems. So report any failures that are not due to
ENOENT.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach `read_packed_refs()` to also
* Allocate and initialize the new `packed_ref_cache`
* Open and close the `packed-refs` file
* Update the `validity` field of the new object
This decreases the coupling between `packed_refs_cache` and
`files_ref_store` by a little bit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we've got the "packed-refs" file locked, then it can't change;
there's no need to keep calling `stat_validity_check()` on it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract a function for deciding whether a reference should be packed.
It is a self-contained bit of logic, so splitting it out improves
readability.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It will soon have some other users.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future, compound reference stores will sometimes need to modify
references in two different reference stores at the same time, meaning
that a single logical reference transaction might have to be
implemented as two internal sub-transactions. They won't want to call
`ref_transaction_commit()` for the two sub-transactions one after the
other, because that wouldn't be atomic (the first commit could succeed
and the second one fail). Instead, they will want to prepare both
sub-transactions (i.e., obtain any necessary locks and do any
pre-checks), and only if both prepare steps succeed, then commit both
sub-transactions.
Start preparing for that day by adding a new, optional
`ref_transaction_prepare()` step to the reference transaction
sequence, which obtains the locks and does any prechecks, reporting
any errors that occur. Also add a `ref_transaction_abort()` function
that can be used to abort a sub-transaction even if it has already
been prepared.
That is on the side of the public-facing API. On the side of the
`ref_store` VTABLE, get rid of `transaction_commit` and instead add
methods `transaction_prepare`, `transaction_finish`, and
`transaction_abort`. A `ref_transaction_commit()` now basically calls
methods `transaction_prepare` then `transaction_finish`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the check that `transaction->state` is valid from
`files_transaction_commit()` to `ref_transaction_commit()`, where
other future reference backends can benefit from it as well.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Michael Haggerty
Ævar Arnfjörð Bjarmason
Brandon Williams