| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The internals of the refs API around the cached refs has been
streamlined.
* mh/separate-ref-cache:
do_for_each_entry_in_dir(): delete function
files_pack_refs(): use reference iteration
commit_packed_refs(): use reference iteration
cache_ref_iterator_begin(): make function smarter
get_loose_ref_cache(): new function
get_loose_ref_dir(): function renamed from get_loose_refs()
do_for_each_entry_in_dir(): eliminate `offset` argument
refs: handle "refs/bisect/" in `loose_fill_ref_dir()`
ref-cache: use a callback function to fill the cache
refs: record the ref_store in ref_cache, not ref_dir
ref-cache: introduce a new type, ref_cache
refs: split `ref_cache` code into separate files
ref-cache: rename `remove_entry()` to `remove_entry_from_dir()`
ref-cache: rename `find_ref()` to `find_ref_entry()`
ref-cache: rename `add_ref()` to `add_ref_entry()`
refs_verify_refname_available(): use function in more places
refs_verify_refname_available(): implement once for all backends
refs_ref_iterator_begin(): new function
refs_read_raw_ref(): new function
get_ref_dir(): don't call read_loose_refs() for "refs/bisect"
|
|
Various small fixes.
* rs/misc-cppcheck-fixes:
server-info: avoid calling fclose(3) twice in update_info_file()
files_for_each_reflog_ent_reverse(): close stream and free strbuf on error
am: close stream on error, but not stdin
|
|
Exit the loop orderly through the cleanup code, instead of dashing out
with logfp still open and sb leaking.
Found with Cppcheck.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Its only remaining caller was itself.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use reference iteration rather than `do_for_each_entry_in_dir()` in
the definition of `files_pack_refs()`. This makes the code shorter and
easier to follow, because the logic can be inline rather than spread
between the main function and a callback function, and it removes the
need to use `pack_refs_cb_data` to preserve intermediate state.
This removes the last callers of `entry_resolves_to_object()` and
`get_loose_ref_dir()`, so delete those functions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use reference iteration rather than do_for_each_entry_in_dir() in the
definition of commit_packed_refs().
Note that an internal consistency check that was previously done in
`write_packed_entry_fn()` is not there anymore. This is actually an
improvement:
The old error message was emitted when there is an entry in the
packed-ref cache that is not `REF_KNOWS_PEELED`, and when we attempted
to peel the reference, the result was `PEEL_INVALID`,
`PEEL_IS_SYMREF`, or `PEEL_BROKEN`. Since a packed ref cannot be a
symref, `PEEL_IS_SYMREF` and `PEEL_BROKEN` can be ruled out. So we're
left with `PEEL_INVALID`.
An entry without `REF_KNOWS_PEELED` can get into the packed-refs cache
in the following two ways:
* The reference was read from a `packed-refs` file that didn't have
the `fully-peeled` attribute. In that case, we *don't want* to emit
an error, because the broken value is presumably a stale value of
the reference that is now masked by a loose version of the same
reference (which we just don't happen to be packing this time). This
is a perfectly legitimate situation and doesn't indicate that the
repository is corrupt. The old code incorrectly emits an error
message in this case. (It was probably never reported as a bug
because this scenario is rare.)
* The reference was a loose reference that was just added to the
packed ref cache by `files_packed_refs()` via
`pack_if_possible_fn()` in preparation for being packed. The latter
function refuses to pack a reference for which
`entry_resolves_to_object()` returns false, and otherwise calls
`peel_entry()` itself and checks the return value. So an entry added
this way should always have `REF_KNOWS_PEELED` and shouldn't trigger
the error message in either the old code or the new.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change `cache_ref_iterator_begin()` to take two new arguments:
* `prefix` -- to iterate only over references with the specified
prefix.
* `prime_dir` -- to "prime" (i.e., pre-load) the cache before starting
the iteration.
The new functionality makes it possible for
`files_ref_iterator_begin()` to be made more ignorant of the internals
of `ref_cache`, and `find_containing_dir()` and `prime_ref_dir()` to
be made private.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract a new function, `get_loose_ref_cache()`, from
get_loose_ref_dir(). The function returns the `ref_cache` for the
loose refs of a `files_ref_store`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new name is more analogous to `get_packed_ref_dir()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was never used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That "refs/bisect/" has to be handled specially when filling the
ref_cache for loose references is a peculiarity of the files backend,
and the ref-cache code shouldn't need to know about it. So move this
code to the callback function, `loose_fill_ref_dir()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a leveling violation for `ref_cache` to know about
`files_ref_store` or that it should call `read_loose_refs()` to lazily
fill cache directories. So instead, have its constructor take as an
argument a callback function that it should use for lazy-filling, and
change `files_ref_store` to supply a pointer to function
`read_loose_refs` (renamed to `loose_fill_ref_dir`) when creating the
ref cache for its loose refs.
This means that we can generify the type of the back-pointer in
`struct ref_cache` from `files_ref_store` to `ref_store`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of keeping a pointer to the `ref_store` in every `ref_dir`
entry, store it once in `struct ref_cache`, and change `struct
ref_dir` to include a pointer to its containing `ref_cache` instead.
This makes it easier to add to the information that is accessible from
a `ref_dir` without increasing the size of every `ref_dir` instance.
Note that previously, every `ref_dir` pointed at the containing
`files_ref_store` regardless of whether it was a part of the loose or
packed reference cache. Now we have to be sure to initialize the
instances to point at the correct containing `ref_cache`. So change
`create_dir_entry()` to take a `ref_cache` parameter, and change its
callers to pass the correct `ref_cache` depending on the purpose of
the new `dir_entry`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For now, it just wraps a `ref_entry *` that points at the root of the
tree. Soon it will hold more information.
Add two new functions, `create_ref_cache()` and `free_ref_cache()`.
Make `free_ref_entry()` private.
Change files-backend to use this type to hold its caches.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `ref_cache` code is currently too tightly coupled to
`files-backend`, making the code harder to understand and making it
awkward for new code to use `ref_cache` (as we indeed have planned).
Start loosening that coupling by splitting `ref_cache` into a separate
module.
This commit moves code, adds declarations, and changes the visibility
of some functions, but doesn't change any code.
The modules are still too tightly coupled, but the situation will be
improved in subsequent commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change `lock_raw_ref()` and `lock_ref_sha1_basic()` to use
`refs_verify_refname_available()` instead of
`verify_refname_available_dir()`. This means that those callsites now
check for conflicts with all references rather than just packed refs,
but the performance cost shouldn't be significant (and will be
regained later).
These were the last callers of `verify_refname_available_dir()`, so
also delete that (very complicated) function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out that we can now implement
`refs_verify_refname_available()` based on the other virtual
functions, so there is no need for it to be defined at the backend
level. Instead, define it once in `refs.c` and remove the
`files_backend` definition.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract a new function from `do_for_each_ref()`. It will be useful
elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract a new function from `refs_resolve_ref_unsafe()`. It will be
useful elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since references under "refs/bisect/" are per-worktree, they have to
be sought in the worktree rather than in the main repository. But
since loose references are found by traversing directories, the
reference iterator won't even get the idea to look for a
"refs/bisect/" directory in the worktree if there is not a directory
with that name in the main repository. Thus `get_ref_dir()` manually
inserts a dir_entry for "refs/bisect/" whenever it reads the entry for
"refs/".
The current code then immediately calls `read_loose_refs()` on that
directory. But since the dir_entry is created with its `incomplete`
flag set, any traversal that gets to this point will read the
directory automatically. So there is no need to call
`read_loose_refs()` explicitly; the lazy mechanism suffices.
And in fact, the attempt to `read_loose_refs()` was broken anyway.
That function needs its `dirname` argument to have a trailing `/`
character, but the invocation here was passing it "refs/bisect"
without a trailing slash. So `read_loose_refs()` would read
`$GIT_DIR/refs/bisect" correctly, but if it found an entry "foo" in
that directory, it would try to read "$GIT_DIR/refs/bisectfoo".
Normally it wouldn't find anything at that path, but the failure was
canceled out because `get_ref_dir()` *also* forgot to reset the
`REF_INCOMPLETE` bit on the dir_entry. So the read was attempted again
when it was accessed, via the lazy mechanism, and this time the read
was done correctly.
This code has been broken since it was first introduced.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A small step towards making files-backend work as a non-main ref store
using the newly added store-aware API.
For the record, `join` and `nm` on refs.o and files-backend.o tell me
that files-backend no longer uses functions that default to
get_main_ref_store().
I'm not yet comfortable at the idea of removing
files_assert_main_repository() (or converting REF_STORE_MAIN to
REF_STORE_WRITE). More staring and testing is required before that can
happen. Well, except peel_ref(). I'm pretty sure that function is safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The transaction struct now takes a ref store at creation and will
operate on that ref store alone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is not meant to cover all existing API. It adds enough to test ref
stores with the new test program test-ref-store, coming soon and to be
used by files-backend.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is intended to replace *_submodule() refs API. It provides
a ref store for a specific submodule, which can be operated on by a new
set of refs API.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
files-backend.c is unlearning submodules. Instead of having a specific
check for submodules to see what operation is allowed, files backend
now takes a set of flags at init. Each operation will check if the
required flags is present before performing.
For now we have four flags: read, write and odb access. Main ref store
has all flags, obviously, while submodule stores are read-only and have
access to odb (*).
The "main" flag stays because many functions in the backend calls
frontend ones without a ref store, so these functions always target the
main ref store. Ideally the flag should be gone after ref-store-aware
api is in place and used by backends.
(*) Submodule code needs for_each_ref. Try take REF_STORE_ODB flag
out. At least t3404 would fail. The "have access to odb" in submodule is
a bit hacky since we don't know from he whether add_submodule_odb() has
been called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
files-backend is now initialized with a $GIT_DIR. Converting a submodule
path to where real submodule gitdir is located is done in get_ref_store().
This gives a slight performance improvement for submodules since we
don't convert submodule path to gitdir at every backend call like
before. We pay that once at ref-store creation.
More cleanup in files_downcast() and files_assert_main_repository()
follows shortly. It's separate to keep noises from this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_ref_store() will soon be renamed to get_submodule_ref_store().
Together with future get_worktree_ref_store(), the three functions
provide an appropriate ref store for different operation modes. New APIs
will be added to operate directly on ref stores.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given $GIT_DIR and $GIT_COMMON_DIR, files-backend is now in charge of
deciding what goes where (*). The end goal is to pass $GIT_DIR only. A
refs "view" of a linked worktree is a logical ref store that combines
two files backends together.
(*) Not entirely true since strbuf_git_path_submodule() still does path
translation underneath. But that's for another patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
This automatically adds the "if submodule then use the submodule version
of git_path" to other call sites too. But it does not mean those
operations are submodule-ready. Not yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes reflog path building consistent, always in the form of
strbuf_git_path(sb, "logs/%s", refname);
It reduces the mental workload a bit in the next patch when that
function call is converted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_path() and friends are going to be killed in files-backend.c in near
future. And because there's a risk with overwriting buffer in
git_path(), let's convert them all to strbuf_git_path(). We'll have
easier time killing/converting strbuf_git_path() then because we won't
have to worry about memory management again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a no-op patch. It prepares the function so that we can release
resources (to be added later in this function) before we return.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
safe_create_dir() can do adjust_shared_perm() internally, and init-db
has always created 'refs' in shared mode since the beginning,
af6e277c5e (git-init-db: initialize shared repositories with --shared -
2005-12-22). So this code looks like extra adjust_shared_perm calls are
unnecessary.
And they are. But let's see why there are here in the first place.
This code was added in 6fb5acfd8f (refs: add methods to init refs db -
2016-09-04). From the diff alone this looks like a faithful refactored
code from init-db.c. But there is a subtle difference:
Between the safe_create_dir() block and adjust_shared_perm() block in
the old init-db.c, we may copy/recreate directories from the repo
template. So it makes sense that adjust_shared_perm() is re-executed
then to fix potential permission screwups.
After 6fb5acfd8f, refs dirs are created after template is copied. Nobody
will change directory permission again. So the extra adjust_shared_perm()
is redudant. Delete them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's not in the diff context, but files_downcast() is called before this
check. If "refs" is NULL, we would have segfaulted before reaching the
check here. And we should never see NULL refs in backend code (frontend
should have caught it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Created in 5f3c3a4e6f (files_log_ref_write: new function - 2015-11-10)
but probably never used outside refs-internal.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"uchar [40]" to "struct object_id" conversion continues.
* bc/object-id:
wt-status: convert to struct object_id
builtin/merge-base: convert to struct object_id
Convert object iteration callbacks to struct object_id
sha1_file: introduce an nth_packed_object_oid function
refs: simplify parsing of reflog entries
refs: convert each_reflog_ent_fn to struct object_id
reflog-walk: convert struct reflog_info to struct object_id
builtin/replace: convert to struct object_id
Convert remaining callers of resolve_refdup to object_id
builtin/merge: convert to struct object_id
builtin/clone: convert to struct object_id
builtin/branch: convert to struct object_id
builtin/grep: convert to struct object_id
builtin/fmt-merge-message: convert to struct object_id
builtin/fast-export: convert to struct object_id
builtin/describe: convert to struct object_id
builtin/diff-tree: convert to struct object_id
builtin/commit: convert to struct object_id
hex: introduce parse_oid_hex
|
|
"git update-ref -d" and other operations to delete references did
not leave any entry in HEAD's reflog when the reference being
deleted was the current branch. This is not a problem in practice
because you do not want to delete the branch you are currently on,
but caused renaming of the current branch to something else not to
be logged in a useful way.
* km/delete-ref-reflog-message:
branch: record creation of renamed branch in HEAD's log
rename_ref: replace empty message in HEAD's log
update-ref: pass reflog message to delete_ref()
delete_ref: accept a reflog message argument
|
|
Code and design clean-up for the refs API.
* mh/submodule-hash:
read_loose_refs(): read refs using resolve_ref_recursively()
files_ref_store::submodule: use NULL for the main repository
base_ref_store_init(): remove submodule argument
refs: push the submodule attribute down
refs: store submodule ref stores in a hashmap
register_ref_store(): new function
refs: remove some unnecessary handling of submodule == ""
refs: make some ref_store lookup functions private
refs: reorder some function definitions
|
|
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
|
|
The current code for reflog entries uses a lot of hard-coded constants,
making it hard to read and modify. Use parse_oid_hex and two temporary
variables to simplify the code and reduce the use of magic constants.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Renaming the current branch adds an event to the current branch's log
and to HEAD's log. However, the logged entries differ. The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).
Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument. This allows the
creation of the new ref to be recorded in HEAD's log. As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.
It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways. Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events. It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the current branch is renamed, the deletion of the old ref is
recorded in HEAD's log with an empty message. Now that delete_ref()
accepts a reflog message, provide a more descriptive message by
passing along the log message that is given to rename_ref().
The next step will be to extend HEAD's log to also include the second
part of the rename, the creation of the new branch.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no need to call read_ref_full() or resolve_gitlink_ref() from
read_loose_refs(), because we already have a ref_store object in hand.
So we can call resolve_ref_recursively() ourselves. Happily, this
unifies the code for the submodule vs. non-submodule cases.
This requires resolve_ref_recursively() to be exposed to the refs
subsystem, though not to non-refs code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
René Scharfe
Michael Haggerty
Nguyễn Thái Ngọc Duy
brian m. carlson
Kyle Meyer