| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Because a deletion of ref would need to remove it from both the
loose ref store and the packed ref store, a delete-ref operation
that logically removes one ref may end up invoking ref-transaction
hook twice, which has been corrected.
* ps/avoid-unnecessary-hook-invocation-with-packed-refs:
refs: skip hooks when deleting uncovered packed refs
refs: do not execute reference-transaction hook on packing refs
refs: demonstrate excessive execution of the reference-transaction hook
refs: allow skipping the reference-transaction hook
refs: allow passing flags when beginning transactions
refs: extract packed_refs_delete_refs() to allow control of transaction
|
|
Remove the now-unused "failure_errno" parameter from the
refs_resolve_ref_unsafe() signature. In my recent 96f6623ada0 (Merge
branch 'ab/refs-errno-cleanup', 2021-11-29) series we made all of its
callers explicitly request the errno via an output parameter.
As that series shows all but one caller ended up passing in a
boilerplate "ignore_errno", since they only cared about whether the
return value was NULL or not, i.e. if the ref could be resolved.
There was one small issue with that series fixed with a follow-up in
31e39123695 (Merge branch 'ab/refs-errno-cleanup', 2022-01-14) a small
bug in that series was fixed.
After those two there was one caller left in sequencer.c that used the
"failure_errno', but as of the preceding commit it uses a boilerplate
"ignore_errno" instead.
This leaves the public refs API without any use of "failure_errno" at
all. We could still do with a bit of cleanup and generalization
between refs.c and refs/files-backend.c before the "reftable"
integration lands, but that's all internal to the reference code
itself.
So let's remove this output parameter. Not only isn't it used now, but
it's unlikely that we'll want it again in the future. We'd like to
slowly move the refs API to a more file-backend independent way of
communicating error codes, having it use a "failure_errno" was only
the first step in that direction. If this or any other function needs
to communicate what specifically is wrong with the requested "refname"
it'll be better to have the function set some output enum of
well-defined error states than piggy-backend on "errno".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reference-transaction hook is executing whenever we prepare, commit
or abort a reference transaction. While this is mostly intentional, in
case of the files backend we're leaking the implementation detail that
the store is in fact a composite store with one loose and one packed
backend to the caller. So while we want to execute the hook for all
logical updates, executing it for such implementation details is
unexpected.
Prepare for a fix by adding a new flag which allows to skip execution of
the hook.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not currently have any flags when creating reference transactions,
but we'll add one to disable execution of the reference transaction hook
in some cases.
Allow passing flags to `ref_store_transaction_begin()` to prepare for
this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the handling of the "verbose" flag entirely out of
"refs/files-backend.c" and into "builtin/reflog.c". This allows the
backend to stop knowing about the EXPIRE_REFLOGS_VERBOSE flag.
The expire_reflog_ent() function shouldn't need to deal with the
implementation detail of whether or not we're emitting verbose output,
by doing this the --verbose output becomes backend-agnostic, so
reftable will get the same output.
I think the output is rather bad currently, and should e.g. be
implemented with some better future mode of progress.[ch], but that's
a topic for another improvement.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test helper for refs subsystem learned to write bogus and/or
nonexistent object name to refs to simulate error situations we
want to test Git in.
* hn/allow-bogus-oid-in-ref-tests:
t1430: create valid symrefs using test-helper
t1430: remove refs using test-tool
refs: introduce REF_SKIP_REFNAME_VERIFICATION flag
refs: introduce REF_SKIP_OID_VERIFICATION flag
refs: update comment.
test-ref-store: plug memory leak in cmd_delete_refs
test-ref-store: parse symbolic flag constants
test-ref-store: remove force-create argument for create-reflog
|
|
Document the parameters given to the reflog entry iterator callback
functions.
* jc/reflog-iterator-callback-doc:
refs: document callback for reflog-ent iterators
|
|
A small simplification of API.
* hn/create-reflog-simplify:
refs: drop force_create argument of create_reflog API
|
|
Use this flag with the test-helper in t1430, to avoid direct writes to the ref
database.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lets the ref-store test helper write non-existent or unparsable objects
into the ref storage.
Use this to make t1006 and t3800 independent of the files storage backend.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
refs_for_each_reflog_ent() and refs_for_each_reflog_ent_reverse()
functions take a callback function that gets called with the details
of each reflog entry. Its parameters were not documented beyond
their names. Elaborate a bit on each of them.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is only one caller, builtin/checkout.c, and it hardcodes
force_create=1.
This argument was introduced in abd0cd3a301 (refs: new public ref function:
safe_create_reflog, 2015-07-21), which promised to immediately use it in a
follow-on commit, but that never happened.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the transitory refs_werrres_ref_unsafe() function to
refs_resolve_ref_unsafe(), now that all callers of the old function
have learned to pass in a "failure_errno" parameter.
The coccinelle semantic patch added in the preceding commit works, but
I couldn't figure out how to get spatch(1) to re-flow these argument
lists (and sometimes make lines way too long), so this rename was done
with:
perl -pi -e 's/refs_werrres_ref_unsafe/refs_resolve_ref_unsafe/g' \
$(git grep -l refs_werrres_ref_unsafe -- '*.c')
But after that "make contrib/coccinelle/refs.cocci.patch" comes up
empty, so the result would have been the same. Let's remove that
transitory semantic patch file, we won't need to retain it for any
other in-flight changes, refs_werrres_ref_unsafe() only existed within
this patch series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preceding commits all callers of refs_resolve_ref_unsafe() were
migrated to the transitory refs_werrres_ref_unsafe() function.
As a first step in getting rid of it let's remove the old function
from the public API (it went unused in a preceding commit).
We then provide both a coccinelle rule to do the rename, and a macro
to avoid breaking the existing callers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the refs_read_ref_full() wrapper in favor of migrating various
refs.c API users to the underlying refs_werrres_ref_unsafe() function.
A careful reading of these callers shows that the callers of this
function did not care about "errno", by moving away from the
refs_resolve_ref_unsafe() wrapper we can be sure that nothing relies
on it anymore.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new refs_werrres_ref_unsafe() function, which is like
refs_resolve_ref_unsafe() except that it explicitly saves away the
"errno" to a passed-in parameter, the refs_resolve_ref_unsafe() then
becomes a wrapper for it.
In subsequent commits we'll migrate code over to it, before finally
making "refs_resolve_ref_unsafe()" with an "errno" parameter the
canonical version, so this this function exists only so that we can
incrementally migrate callers, it will be going away in a subsequent
commit.
As the added comment notes has a rather tortured name to be the same
length as "refs_resolve_ref_unsafe", to avoid churn as we won't need
to re-indent the argument lists, similarly the documentation and
structure of it in refs.h is designed to minimize a diff in a
subsequent commit, where that documentation will be added to the new
refs_resolve_ref_unsafe().
At the end of this migration the "meaningful errno" TODO item left in
76d70dc0c63 (refs.c: make resolve_ref_unsafe set errno to something
meaningful on error, 2014-06-20) will be resolved.
As can be seen from the use of refs_read_raw_ref() we'll also need to
convert some functions that the new refs_werrres_ref_unsafe() itself
calls to take this "failure_errno". That will be done in subsequent
commits.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref iteration code used to optionally allow dangling refs to be
shown, which has been tightened up.
* jk/ref-paranoia:
refs: drop "broken" flag from for_each_fullref_in()
ref-filter: drop broken-ref code entirely
ref-filter: stop setting FILTER_REFS_INCLUDE_BROKEN
repack, prune: drop GIT_REF_PARANOIA settings
refs: turn on GIT_REF_PARANOIA by default
refs: omit dangling symrefs when using GIT_REF_PARANOIA
refs: add DO_FOR_EACH_OMIT_DANGLING_SYMREFS flag
refs-internal.h: reorganize DO_FOR_EACH_* flag documentation
refs-internal.h: move DO_FOR_EACH_* flags next to each other
t5312: be more assertive about command failure
t5312: test non-destructive repack
t5312: create bogus ref as necessary
t5312: drop "verbose" helper
t5600: provide detached HEAD for corruption failures
t5516: don't use HEAD ref for invalid ref-deletion tests
t7900: clean up some more broken refs
|
|
Code cleanup.
* ab/retire-refs-unused-funcs:
refs/ref-cache.[ch]: remove "incomplete" from create_dir_entry()
refs/ref-cache.c: remove "mkdir" parameter from find_containing_dir()
refs/ref-cache.[ch]: remove unused add_ref_entry()
refs/ref-cache.[ch]: remove unused remove_entry_from_dir()
refs.[ch]: remove unused ref_storage_backend_exists()
|
|
This function was added in 3dce444f178 (refs: add a backend method
structure, 2016-09-04), but has never been used by anything. The only
caller that might care uses find_ref_storage_backend() directly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No callers pass in anything but "0" here. Likewise to our sibling
functions. Note that some of them ferry along the flag, but none of
their callers pass anything but "0" either.
Nor is anybody likely to change that. Callers which really want to see
all of the raw refs use for_each_rawref(). And anybody interested in
iterating a subset of the refs will likely be happy to use the
now-default behavior of showing broken refs, but omitting dangling
symlinks.
So we can get rid of this whole feature.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the the preceding commit the "oid" parameter to reflog_expire()
is always NULL, but it was not cleaned up to reduce the size of the
diff. Let's do that subsequent API and documentation cleanup now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During reflog expiry, the cmd_reflog_expire() function first iterates
over all reflogs in logs/*, and then one-by-one acquires the lock for
each one and expires it. This behavior has been with us since this
command was implemented in 4264dc15e1 ("git reflog expire",
2006-12-19).
Change this to stop calling lock_ref_oid_basic() with the OID we saw
when we looped over the logs, instead have it pass the OID it managed
to lock.
This mostly mitigates a race condition where e.g. "git gc" will fail
in a concurrently updated repository because the branch moved since
"git reflog expire --all" was started. I.e. with:
error: cannot lock ref '<refname>': ref '<refname>' is at <OID-A> but expected <OID-B>
This behavior of passing in an "oid" was needed for an edge-case that
I've untangled in this and preceding commits though, namely that we
needed this OID because we'd:
1. Lookup the reflog name/OID via dwim_log()
2. With that OID, lock the reflog
3. Later in builtin/reflog.c we use the OID we looked as input to
lookup_commit_reference_gently(), assured that it's equal to the
OID we got from dwim_log().
We can be sure that this change is safe to make because between
dwim_log (step #1) and lock_ref_oid_basic (step #2) there was no other
logic relevant to the OID or expiry run in the cmd_reflog_expire()
caller.
We can thus treat that code as a black box, before and after this
change it would get an OID that's been locked, the only difference is
that now we mostly won't be failing to get the lock due to the TOCTOU
race[0]. That failure was purely an implementation detail in how the
"current OID" was looked up, it was divorced from the locking
mechanism.
What do we mean with "mostly"? It mostly mitigates it because we'll
still run into cases where the ref is locked and being updated as we
want to expire it, and other git processes wanting to update the refs
will in turn race with us as we expire the reflog.
That remaining race can in turn be mitigated with the
core.filesRefLockTimeout setting, see 4ff0f01cb7 ("refs: retry
acquiring reference locks for 100ms", 2017-08-21). In practice if that
value is high enough we'll probably never have ref updates or reflog
expiry failing, since the clients involved will retry for far longer
than the time any of those operations could take.
See [1] for an initial report of how this impacted "git gc" and a
large discussion about this change in early 2019. In particular patch
looked good to Michael Haggerty, see his[2]. That message seems to not
have made it to the ML archive, its content is quoted in full in my
[3].
I'm leaving behind now-unused code the refs API etc. that takes the
now-NULL "unused_oid" argument, and other code that can be simplified now
that we never have on OID in that context, that'll be cleaned up in
subsequent commits, but for now let's narrowly focus on fixing the
"git gc" issue. As the modified assert() shows we always pass a NULL
oid to reflog_expire() now.
Unfortunately this sort of probabilistic contention is hard to turn
into a test. I've tested this by running the following three subshells
in concurrent terminals:
(
rm -rf /tmp/git &&
git init /tmp/git &&
while true
do
head -c 10 /dev/urandom | hexdump >/tmp/git/out &&
git -C /tmp/git add out &&
git -C /tmp/git commit -m"out"
done
)
(
rm -rf /tmp/git-clone &&
git clone file:///tmp/git /tmp/git-clone &&
while git -C /tmp/git-clone pull
do
date
done
)
(
while git -C /tmp/git-clone reflog expire --all
do
date
done
)
Before this change the "reflog expire" would fail really quickly with
the "but expected" error noted above.
After this change both the "pull" and "reflog expire" will run for a
while, but eventually fail because I get unlucky with
core.filesRefLockTimeout (the "reflog expire" is in a really tight
loop). As noted above that can in turn be mitigated with higher values
of core.filesRefLockTimeout than the 100ms default.
As noted in the commentary added in the preceding commit there's also
the case of branches being racily deleted, that can be tested by
adding this to the above:
(
while git -C /tmp/git-clone branch topic master &&
git -C /tmp/git-clone branch -D topic
do
date
done
)
With core.filesRefLockTimeout set to 10 seconds (it can probably be a
lot lower) I managed to run all four of these concurrently for about
an hour, and accumulated ~125k commits, auto-gc's and all, and didn't
have a single failure. The loops visibly stall while waiting for the
lock, but that's expected and desired behavior.
0. https://en.wikipedia.org/wiki/Time-of-check_to_time-of-use
1. https://lore.kernel.org/git/87tvg7brlm.fsf@evledraar.gmail.com/
2. http://lore.kernel.org/git/b870a17d-2103-41b8-3cbc-7389d5fff33a@alum.mit.edu
3. https://lore.kernel.org/git/87pnqkco8v.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ls-refs protocol operation has been optimized to narrow the
sub-hierarchy of refs/ it walks to produce response.
* tb/ls-refs-optim:
ls-refs.c: traverse prefixes of disjoint "ref-prefix" sets
ls-refs.c: initialize 'prefixes' before using it
refs: expose 'for_each_fullref_in_prefixes'
|
|
This function was used in the ref-filter.c code to find the longest
common prefix of among a set of refspecs, and then to iterate all of the
references that descend from that prefix.
A future patch will want to use that same code from ls-refs.c, so
prepare by exposing and moving it to refs.c. Since there is nothing
specific to the ref-filter code here (other than that it was previously
the only caller of this function), this really belongs in the more
generic refs.h header.
The code moved in this patch is identical before and after, with the one
exception of renaming some arguments to be consistent with other
functions exposed in refs.h.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to introduce a message giving users running `git init` some
advice about `init.defaultBranch`. This will necessarily be done in
`repo_default_branch_name()`.
Not all code paths want to show that advice, though. In particular, the
`git clone` codepath _specifically_ asks for `init_db()` to be quiet,
via the `INIT_DB_QUIET` flag.
In preparation for showing users above-mentioned advice, let's change
the function signature of `get_default_branch_name()` to accept the
parameter `quiet`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it clear that dwim_ref() is just repo_dwim_ref() without the
first parameter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will be necessary to replace file existence checks for pseudorefs.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name "argv-array" isn't very good, because it describes what the
data type can be used for (program argument arrays), not what it
actually is (a dynamically-growing string array that maintains a
NULL-terminator invariant). This leads to people being hesitant to use
it for other cases where it would actually be a good fit. The existing
name is also clunky to use. It's overly long, and the name often leads
to saying things like "argv.argv" (i.e., the field names overlap with
variable names, since they're describing the use, not the type). Let's
give it a more neutral name.
I settled on "strvec" because "vector" is the name for a dynamic array
type in many programming languages. "strarray" would work, too, but it's
longer and a bit more awkward to say (and don't we all say these things
in our mind as we type them?).
A more extreme direction would be a generic data structure which stores
a NULL-terminated of _any_ type. That would be easy to do with void
pointers, but we'd lose some type safety for the existing cases. Plus it
raises questions about memory allocation and ownership. So I limited
myself here to changing names only, and not semantics. If we do find a
use for that more generic data type, we could perhaps implement it at a
lower level and then provide type-safe wrappers around it for strings.
But that can come later.
This patch does the minimum to convert the struct and function names in
the header and implementation, leaving a few things for follow-on
patches:
- files retain their original names for now
- struct field names are retained for now
- there's a preprocessor compat layer that lets most users remain the
same for now. The exception is headers which made a manual forward
declaration of the struct. I've converted them (and their dependent
function declarations) here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
|
|
We just introduced the command-line option
`--initial-branch=<branch-name>` to allow initializing a new repository
with a different initial branch than the hard-coded one.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each and every
`git init` invocation), let's introduce the `init.defaultBranch` config
setting.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Don Goodman-Wilson <don@goodman-wilson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref_filter_match() method is defined in refs.h and implemented
in refs.c, but is only used by add_ref_decoration() in log-tree.c.
Move it into that file as a static helper method. The
match_ref_pattern() comes along for the ride.
While moving the code, also make a slight adjustment to have
ref_filter_match() take a struct decoration_filter pointer instead
of multiple string lists. This is non-functional, but will make a
later change be much cleaner.
The diff is easier to parse when using the --color-moved option.
Reported-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the documentation from Documentation/technical/api-ref-iteration.txt
to refs.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-ref-iteration.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In recent versions of Git, per-worktree refs are exposed in
refs/worktrees/<wtname>/ hierarchy, which means that worktree names
must be a valid refname component. The code now sanitizes the names
given to worktrees, to make sure these refs are well-formed.
* nd/worktree-name-sanitization:
worktree add: sanitize worktree names
|
|
Worktree names are based on $(basename $GIT_WORK_TREE). They aren't
significant until 3a3b9d8cde (refs: new ref types to make per-worktree
refs visible to all worktrees - 2018-10-21), where worktree name could
be part of a refname and must follow refname rules.
Update 'worktree add' code to remove special characters to follow
these rules. In the future the user will be able to specify the
worktree name by themselves if they're not happy with this dumb
character substitution.
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mechanically and systematically drop "extern" from function
declarlation.
* dl/no-extern-in-func-decl:
*.[ch]: manually align parameter lists
*.[ch]: remove extern from function declarations using sed
*.[ch]: remove extern from function declarations using spatch
|
|
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
|
|
One of the problems with multiple worktree is accessing per-worktree
refs of one worktree from another worktree. This was sort of solved by
multiple ref store, where the code can open the ref store of another
worktree and has access to the ref space of that worktree.
The problem with this is reporting. "HEAD" in another ref space is
also called "HEAD" like in the current ref space. In order to
differentiate them, all the code must somehow carry the ref store
around and print something like "HEAD from this ref store".
But that is not feasible (or possible with a _lot_ of work). With the
current design, we pass a reference around as a string (so called
"refname"). Extending this design to pass a string _and_ a ref store
is a nightmare, especially when handling extended SHA-1 syntax.
So we do it another way. Instead of entering a separate ref space, we
make refs from other worktrees available in the current ref space. So
"HEAD" is always HEAD of the current worktree, but then we can have
"worktrees/blah/HEAD" to denote HEAD from a worktree named
"blah". This syntax coincidentally matches the underlying directory
structure which makes implementation a bit easier.
The main worktree has to be treated specially because well... it's
special from the beginning. So HEAD from the main worktree is
acccessible via the name "main-worktree/HEAD" instead of
"worktrees/main/HEAD" because "main" could be just another secondary
worktree.
This patch also makes it possible to specify refs from one worktree in
another one, e.g.
git log worktrees/foo/HEAD
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 60ce76d3581 (refs: add repository argument to for_each_replace_ref,
2018-04-11) and 0d296c57aec (refs: allow for_each_replace_ref to handle
arbitrary repositories, 2018-04-11), for_each_replace_ref learned how
to iterate over refs by a given arbitrary repository.
New attempts in the object store conversion have shown that it is useful
to have the repository handle available that the refs iteration is
currently iterating over.
To achieve this goal we will need to add a repository argument to
each_ref_fn in refs.h. However as many callers rely on the signature
such a patch would be too large.
So convert the internals of the ref subsystem first to pass through a
repository argument without exposing the change to the user. Assume
the_repository for the passed through repository, although it is not
used anywhere yet.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Patrick Steinhardt
Han-Wen Nienhuys
Jeff King
Taylor Blau
Johannes Schindelin
Jonathan Tan
Don Goodman-Wilson
Derrick Stolee
Heba Waly
Nguyễn Thái Ngọc Duy
Denton Liu
Stefan Beller