| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If our call to refs_read_raw_ref() fails, we check errno to
see if the ref is simply missing, or if we encountered a
more serious error. If it's just missing, then in "write"
mode (i.e., when RESOLVE_REFS_READING is not set), this is
perfectly fine.
However, checking for ENOENT isn't sufficient to catch all
missing-ref cases. In the filesystem backend, we may also
see EISDIR when we try to resolve "a" and "a/b" exists.
Likewise, we may see ENOTDIR if we try to resolve "a/b" and
"a" exists. In both of those cases, we know that our
resolved ref doesn't exist, but we return an error (rather
than reporting the refname and returning a null sha1).
This has been broken for a long time, but nobody really
noticed because the next step after resolving without the
READING flag is usually to lock the ref and write it. But in
both of those cases, the write will fail with the same
errno due to the directory/file conflict.
There are two cases where we can notice this, though:
1. If we try to write "a" and there's a leftover directory
already at "a", even though there is no ref "a/b". The
actual write is smart enough to move the empty "a" out
of the way.
This is reasonably rare, if only because the writing
code has to do an independent resolution before trying
its write (because the actual update_ref() code handles
this case fine). The notes-merge code does this, and
before the fix in the prior commit t3308 erroneously
expected this case to fail.
2. When resolving symbolic refs, we typically do not use
the READING flag because we want to resolve even
symrefs that point to unborn refs. Even if those unborn
refs could not actually be written because of d/f
conflicts with existing refs.
You can see this by asking "git symbolic-ref" to report
the target of a symref pointing past a d/f conflict.
We can fix the problem by recognizing the other "missing"
errnos and treating them like ENOENT. This should be safe to
do even for callers who are then going to actually write the
ref, because the actual writing process will fail if the d/f
conflict is a real one (and t1404 checks these cases).
Arguably this should be the responsibility of the
files-backend to normalize all "missing ref" errors into
ENOENT (since something like EISDIR may not be meaningful at
all to a database backend). However other callers of
refs_read_raw_ref() may actually care about the distinction;
putting this into resolve_ref() is the minimal fix for now.
The new tests in t1401 use git-symbolic-ref, which is the
most direct way to check the resolution by itself.
Interestingly we actually had a test that setup this case
already, but we only used it to verify that the funny state
could be overwritten, not that it could be resolved.
We also add a new test in t3200, as "branch -m" was the
original motivation for looking into this. What happens is
this:
0. HEAD is pointing to branch "a"
1. The user asks to rename "a" to "a/b".
2. We create "a/b" and delete "a".
3. We then try to update any worktree HEADs that point to
the renamed ref (including the main repo HEAD). To do
that, we have to resolve each HEAD. But now our HEAD is
pointing at "a", and we get EISDIR due to the loose
"a/b". As a result, we think there is no HEAD, and we
do not update it. It now points to the bogus "a".
Interestingly this case used to work, but only accidentally.
Before 31824d180d (branch: fix branch renaming not updating
HEADs correctly, 2017-08-24), we'd update any HEAD which we
couldn't resolve. That was wrong, but it papered over the
fact that we were incorrectly failing to resolve HEAD.
So while the bug demonstrated by the git-symbolic-ref is
quite old, the regression to "branch -m" is recent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Operations that do not touch (majority of) packed refs have been
optimized by making accesses to packed-refs file lazy; we no longer
pre-parse everything, and an access to a single ref in the
packed-refs does not touch majority of irrelevant refs, either.
* mh/mmap-packed-refs: (21 commits)
packed-backend.c: rename a bunch of things and update comments
mmapped_ref_iterator: inline into `packed_ref_iterator`
ref_cache: remove support for storing peeled values
packed_ref_store: get rid of the `ref_cache` entirely
ref_store: implement `refs_peel_ref()` generically
packed_read_raw_ref(): read the reference from the mmapped buffer
packed_ref_iterator_begin(): iterate using `mmapped_ref_iterator`
read_packed_refs(): ensure that references are ordered when read
packed_ref_cache: keep the `packed-refs` file mmapped if possible
packed-backend.c: reorder some definitions
mmapped_ref_iterator_advance(): no peeled value for broken refs
mmapped_ref_iterator: add iterator over a packed-refs file
packed_ref_cache: remember the file-wide peeling state
read_packed_refs(): read references with minimal copying
read_packed_refs(): make parsing of the header line more robust
read_packed_refs(): only check for a header at the top of the file
read_packed_refs(): use mmap to read the `packed-refs` file
die_unterminated_line(), die_invalid_line(): new functions
packed_ref_cache: add a backlink to the associated `packed_ref_store`
prefix_ref_iterator: break when we leave the prefix
...
|
|
"git branch" learned "-c/-C" to create a new branch by copying an
existing one.
* sd/branch-copy:
branch: fix "copy" to never touch HEAD
branch: add a --copy (-c) option to go with --move (-m)
branch: add test for -m renaming multiple config sections
config: create a function to format section headers
|
|
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_ref_unsafe() if hash is not needed
refs: pass NULL to refs_resolve_ref_unsafe() if hash is not needed
refs: make sha1 output parameter of refs_resolve_ref_unsafe() optional
|
|
We're about to stop storing packed refs in a `ref_cache`. That means
that the only way we have left to optimize `peel_ref()` is by checking
whether the reference being peeled is the one currently being iterated
over (in `current_ref_iter`), and if so, using `ref_iterator_peel()`.
But this can be done generically; it doesn't have to be implemented
per-backend.
So implement `refs_peel_ref()` in `refs.c` and remove the `peel_ref()`
method from the refs API.
This removes the last callers of a couple of functions, so delete
them. More cleanup to come...
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
API error-proofing which happens to also squelch warnings from GCC.
* tg/refs-allowed-flags:
refs: strip out not allowed flags from ref_transaction_update
|
|
Step #0 of a planned & larger series to make the in-core object
store per in-core repository object.
* jn/per-repo-object-store-fixes:
replace-objects: evaluate replacement refs without using the object store
push, fetch: error out for submodule entries not pointing to commits
pack: make packed_git_mru global a value instead of a pointer
|
|
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
|
|
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow callers of refs_resolve_ref_unsafe() to pass NULL if they don't
need the resolved hash value. We already allow the same for the flags
parameter. This new leniency is inherited by the various wrappers like
resolve_ref_unsafe().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many leaks of strbuf have been fixed.
* rs/strbuf-leakfix: (34 commits)
wt-status: release strbuf after use in wt_longstatus_print_tracking()
wt-status: release strbuf after use in read_rebase_todolist()
vcs-svn: release strbuf after use in end_revision()
utf8: release strbuf on error return in strbuf_utf8_replace()
userdiff: release strbuf after use in userdiff_get_textconv()
transport-helper: release strbuf after use in process_connect_service()
sequencer: release strbuf after use in save_head()
shortlog: release strbuf after use in insert_one_record()
sha1_file: release strbuf on error return in index_path()
send-pack: release strbuf on error return in send_pack()
remote: release strbuf after use in set_url()
remote: release strbuf after use in migrate_file()
remote: release strbuf after use in read_remote_branches()
refs: release strbuf on error return in write_pseudoref()
notes: release strbuf after use in notes_copy_from_stdin()
merge: release strbuf after use in write_merge_heads()
merge: release strbuf after use in save_state()
mailinfo: release strbuf on error return in handle_boundary()
mailinfo: release strbuf after use in handle_from()
help: release strbuf on error return in exec_woman_emacs()
...
|
|
"git gc" and friends when multiple worktrees are used off of a
single repository did not consider the index and per-worktree refs
of other worktrees as the root for reachability traversal, making
objects that are in use only in other worktrees to be subject to
garbage collection.
* nd/prune-in-worktree:
refs.c: reindent get_submodule_ref_store()
refs.c: remove fallback-to-main-store code get_submodule_ref_store()
rev-list: expose and document --single-worktree
revision.c: --reflog add HEAD reflog from all worktrees
files-backend: make reflog iterator go through per-worktree reflog
revision.c: --all adds HEAD from all worktrees
refs: remove dead for_each_*_submodule()
refs.c: move for_each_remote_ref_submodule() to submodule.c
revision.c: use refs_for_each*() instead of for_each_*_submodule()
refs: add refs_head_ref()
refs: move submodule slash stripping code to get_submodule_ref_store
refs.c: refactor get_submodule_ref_store(), share common free block
revision.c: --indexed-objects add objects from all worktrees
revision.c: refactor add_index_objects_to_pending()
refs.c: use is_dir_sep() in resolve_gitlink_ref()
revision.h: new flag in struct rev_info wrt. worktree-related refs
|
|
References are iterated over in order by refname, but reflogs are not.
Some consumers of reference iteration care about the difference. Teach
each `ref_iterator` to keep track of whether its output is ordered.
`overlay_ref_iterator` is one of the picky consumers. Add a sanity
check in `overlay_ref_iterator_begin()` to verify that its inputs are
ordered.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass DO_FOR_EACH_INCLUDE_BROKEN when iterating over replacement refs
so that the iteration does not require opening the named objects from
the object store. This avoids a dependency cycle between object access
and replace ref iteration.
Moreover the ref subsystem has not been migrated yet to access the
object store via passed in repository objects. As a result, without
this patch, iterating over replace refs in a repository other than
the_repository it produces errors:
error: refs/replace/3afabef75c627b894cccc3bcae86837abc7c32fe does not point to a valid object!
Noticed while adapting the object store (and in particular its
evaluation of replace refs) to handle arbitrary repositories.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers are only allowed to pass certain flags into
ref_transaction_update, other flags are internal to it. To prevent
mistakes from the callers, strip the internal only flags out before
continuing.
This was noticed because of a compiler warning gcc 7.1.1 issued about
passing a NULL parameter as second parameter to memcpy (through
hashcpy):
In file included from refs.c:5:0:
refs.c: In function ‘ref_transaction_verify’:
cache.h:948:2: error: argument 2 null where non-null expected [-Werror=nonnull]
memcpy(sha_dst, sha_src, GIT_SHA1_RAWSZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from git-compat-util.h:165:0,
from cache.h:4,
from refs.c:5:
/usr/include/string.h:43:14: note: in a call to function ‘memcpy’ declared here
extern void *memcpy (void *__restrict __dest, const void *__restrict __src,
^~~~~~
The call to hascpy in ref_transaction_add_update is protected by the
passed in flags, but as we only add flags there, gcc notices
REF_HAVE_NEW or REF_HAVE_OLD flags could be passed in from the outside,
which would potentially result in passing in NULL as second parameter to
memcpy.
Fix both the compiler warning, and make the interface safer for its
users by stripping the internal flags out.
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to acquire a lock on a reference (e.g. while accepting a
push from a client) used to immediately fail when the reference is
already locked---now it waits for a very short while and retries,
which can make it succeed if the lock holder was holding it during
a read-only operation.
* mh/ref-lock-entry:
refs: retry acquiring reference locks for 100ms
|
|
With the new "if (!submodule) return NULL;" code added in the previous
commit, we don't need to check if submodule is not NULL anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At this state, there are three get_submodule_ref_store() callers:
- for_each_remote_ref_submodule()
- handle_revision_pseudo_opt()
- resolve_gitlink_ref()
The first two deal explicitly with submodules (and we should never fall
back to the main ref store as a result). They are only called from
submodule.c:
- find_first_merges()
- submodule_needs_pushing()
- push_submodule()
The last one, as its name implies, deals only with submodules too, and
the "submodule" (path) argument must be a non-NULL, non-empty string.
So, this "if NULL or empty string" code block should never ever
trigger. And it's wrong to fall back to the main ref store
anyway. Delete it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are used in revision.c. After the last patch they are replaced
with the refs_ version. Delete them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a better place that will benefit all submodule callers instead
of just resolve_gitlink_ref()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "submodule" argument in this function is a path, which can have
either '/' or '\\' as a separator. Use is_dir_sep() to support both.
Noticed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* cc/ref-is-hidden-microcleanup:
refs: use skip_prefix() in ref_is_hidden()
|
|
The philosophy of reference locking has been, "if another process is
changing a reference, then whatever I'm trying to do to it will
probably fail anyway because my old-SHA-1 value is probably no longer
current". But this argument falls down if the other process has locked
the reference to do something that doesn't actually change the value
of the reference, such as `pack-refs` or `reflog expire`. There
actually *is* a decent chance that a planned reference update will
still be able to go through after the other process has released the
lock.
So when trying to lock an individual reference (e.g., when creating
"refs/heads/master.lock"), if it is already locked, then retry the
lock acquisition for approximately 100 ms before giving up. This
should eliminate some unnecessary lock conflicts without wasting a lot
of time.
Add a configuration setting, `core.filesRefLockTimeout`, to allow this
setting to be tweaked.
Note: the function `get_files_ref_lock_timeout_ms()` cannot be private
to the files backend because it is also used by `write_pseudoref()`
and `delete_pseudoref()`, which are defined in `refs.c` so that they
can be used by other reference backends.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "ref-store" code reorganization continues.
* mh/packed-ref-store: (32 commits)
files-backend: cheapen refname_available check when locking refs
packed_ref_store: handle a packed-refs file that is a symlink
read_packed_refs(): die if `packed-refs` contains bogus data
t3210: add some tests of bogus packed-refs file contents
repack_without_refs(): don't lock or unlock the packed refs
commit_packed_refs(): remove call to `packed_refs_unlock()`
clear_packed_ref_cache(): don't protest if the lock is held
packed_refs_unlock(), packed_refs_is_locked(): new functions
packed_refs_lock(): report errors via a `struct strbuf *err`
packed_refs_lock(): function renamed from lock_packed_refs()
commit_packed_refs(): use a staging file separate from the lockfile
commit_packed_refs(): report errors rather than dying
packed_ref_store: make class into a subclass of `ref_store`
packed-backend: new module for handling packed references
packed_read_raw_ref(): new function, replacing `resolve_packed_ref()`
packed_ref_store: support iteration
packed_peel_ref(): new function, extracted from `files_peel_ref()`
repack_without_refs(): take a `packed_ref_store *` parameter
get_packed_ref(): take a `packed_ref_store *` parameter
rollback_packed_refs(): take a `packed_ref_store *` parameter
...
|
|
Code cleanup.
* cc/ref-is-hidden-microcleanup:
refs: use skip_prefix() in ref_is_hidden()
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
|
|
This is shorter, makes the logic a bit easier to follow, and is
perhaps a bit faster too.
The logic is to make the final decision only when "subject" is there,
its early part matches "match", and the match is at the slash
boundary (or the whole thing).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the flags for get_oid_with_context and friends to use "OID"
instead of "SHA1" in their names.
This transform was made by running the following one-liner on the
affected files:
perl -pi -e 's/GET_SHA1/GET_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the hashmap API so that data to customize the behaviour of
the comparison function can be specified at the time a hashmap is
initialized.
* sb/hashmap-customize-comparison:
hashmap: migrate documentation from Documentation/technical into header
patch-ids.c: use hashmap correctly
hashmap.h: compare function has access to a data field
|
|
Minor code cleanup.
* ab/wildmatch:
wildmatch: remove unused wildopts parameter
|
|
When using the hashmap a common need is to have access to caller provided
data in the compare function. A couple of times we abuse the keydata field
to pass in the data needed. This happens for example in patch-ids.c.
This patch changes the function signature of the compare function
to have one more void pointer available. The pointer given for each
invocation of the compare function must be defined in the init function
of the hashmap and is just passed through.
Documentation of this new feature is deferred to a later patch.
This is a rather mechanical conversion, just adding the new pass-through
parameter. However while at it improve the naming of the fields of all
compare functions used by hashmaps by ensuring unused parameters are
prefixed with 'unused_' and naming the parameters what they are (instead
of 'unused' make it 'unused_keydata').
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bugfix for a topic that is (only) in 'master'.
* mh/packed-ref-store-prep:
for_each_bisect_ref(): don't trim refnames
lock_packed_refs(): fix cache validity check
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Remove the unused wildopts placeholder struct from being passed to all
wildmatch() invocations, or rather remove all the boilerplate NULL
parameters.
This parameter was added back in commit 9b3497cab9 ("wildmatch: rename
constants and update prototype", 2013-01-01) as a placeholder for
future use. Over 4 years later nothing has made use of it, let's just
remove it. It can be added in the future if we find some reason to
start using such a parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the interface between `files_ref_store` and
`packed_ref_store` is relatively narrow, move the latter into a new
module, "refs/packed-backend.h" and "refs/packed-backend.c". It still
doesn't quite implement the `ref_store` interface, but it will soon.
This commit moves code around and adjusts its visibility, but doesn't
change anything.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`for_each_bisect_ref()` is called by `for_each_bad_bisect_ref()` with
a term "bad". This used to make it call `for_each_ref_in_submodule()`
with a prefix "refs/bisect/bad". But the latter is the name of the
reference that is being sought, so the empty string was being passed
to the callback as the trimmed refname. Moreover, this questionable
practice was turned into an error by
b9c8e7f2fb prefix_ref_iterator: don't trim too much, 2017-05-22
It makes more sense (and agrees better with the documentation of
`--bisect`) for the callers to receive the full reference names. So
* Add a new function, `for_each_fullref_in_submodule()`, to the refs
API. This plugs a gap in the existing functionality, analogous to
`for_each_fullref_in()` but accepting a `submodule` argument.
* Change `for_each_bad_bisect_ref()` to call the new function rather
than `for_each_ref_in_submodule()`.
* Add a test.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the ability to --copy a branch and its reflog and configuration,
this uses the same underlying machinery as the --move (-m) option
except the reflog and configuration is copied instead of being moved.
This is useful for e.g. copying a topic branch to a new version,
e.g. work to work-2 after submitting the work topic to the list, while
preserving all the tracking info and other configuration that goes
with the branch, and unlike --move keeping the other already-submitted
branch around for reference.
Like --move, when the source branch is the currently checked out
branch the HEAD is moved to the destination branch. In the case of
--move we don't really have a choice (other than remaining on a
detached HEAD) and in order to keep the functionality consistent, we
are doing it in similar way for --copy too.
The most common usage of this feature is expected to be moving to a
new topic branch which is a copy of the current one, in that case
moving to the target branch is what the user wants, and doesn't
unexpectedly behave differently than --move would.
One outstanding caveat of this implementation is that:
git checkout maint &&
git checkout master &&
git branch -c topic &&
git checkout -
Will check out 'maint' instead of 'master'. This is because the @{-N}
feature (or its -1 shorthand "-") relies on HEAD reflogs created by
the checkout command, so in this case we'll checkout maint instead of
master, as the user might expect. What to do about that is left to a
future change.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of handling `GIT_REF_PARANOIA` in
`files_ref_iterator_begin()`, handle it in
`refs_ref_iterator_begin()`, where it will cover all reference stores.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's pretty cheap to make sure that the caller didn't pass us an
unsorted list by accident, so do so.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eliminate a theoretical risk of integer overflow if the two types have
different sizes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It will soon have some other users.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future, compound reference stores will sometimes need to modify
references in two different reference stores at the same time, meaning
that a single logical reference transaction might have to be
implemented as two internal sub-transactions. They won't want to call
`ref_transaction_commit()` for the two sub-transactions one after the
other, because that wouldn't be atomic (the first commit could succeed
and the second one fail). Instead, they will want to prepare both
sub-transactions (i.e., obtain any necessary locks and do any
pre-checks), and only if both prepare steps succeed, then commit both
sub-transactions.
Start preparing for that day by adding a new, optional
`ref_transaction_prepare()` step to the reference transaction
sequence, which obtains the locks and does any prechecks, reporting
any errors that occur. Also add a `ref_transaction_abort()` function
that can be used to abort a sub-transaction even if it has already
been prepared.
That is on the side of the public-facing API. On the side of the
`ref_store` VTABLE, get rid of `transaction_commit` and instead add
methods `transaction_prepare`, `transaction_finish`, and
`transaction_abort`. A `ref_transaction_commit()` now basically calls
methods `transaction_prepare` then `transaction_finish`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the check that `transaction->state` is valid from
`files_transaction_commit()` to `ref_transaction_commit()`, where
other future reference backends can benefit from it as well.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Michael Haggerty
René Scharfe
Stefan Beller
Thomas Gummerer
Nguyễn Thái Ngọc Duy
Christian Couder
brian m. carlson
Ævar Arnfjörð Bjarmason
Sahil Dua
Brandon Williams