summaryrefslogtreecommitdiff
path: root/reflog-walk.c
AgeCommit message (Collapse)AuthorFilesLines
2015-06-29convert "enum date_mode" into a structLibravatar Jeff King1-2/+2
In preparation for adding date modes that may carry extra information beyond the mode itself, this patch converts the date_mode enum into a struct. Most of the conversion is fairly straightforward; we pass the struct as a pointer and dereference the type field where necessary. Locations that declare a date_mode can use a "{}" constructor. However, the tricky case is where we use the enum labels as constants, like: show_date(t, tz, DATE_NORMAL); Ideally we could say: show_date(t, tz, &{ DATE_NORMAL }); but of course C does not allow that. Likewise, we cannot cast the constant to a struct, because we need to pass an actual address. Our options are basically: 1. Manually add a "struct date_mode d = { DATE_NORMAL }" definition to each caller, and pass "&d". This makes the callers uglier, because they sometimes do not even have their own scope (e.g., they are inside a switch statement). 2. Provide a pre-made global "date_normal" struct that can be passed by address. We'd also need "date_rfc2822", "date_iso8601", and so forth. But at least the ugliness is defined in one place. 3. Provide a wrapper that generates the correct struct on the fly. The big downside is that we end up pointing to a single global, which makes our wrapper non-reentrant. But show_date is already not reentrant, so it does not matter. This patch implements 3, along with a minor macro to keep the size of the callers sane. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-15refs.c: change resolve_ref_unsafe reading argument to be a flags fieldLibravatar Ronnie Sahlberg1-2/+3
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref resolves successfully for writing but not for reading). Change this to be a flags field instead, and pass the new constant RESOLVE_REF_READING when we want this behaviour. While at it, swap two of the arguments in the function to put output arguments at the end. As a nice side effect, this ensures that we can catch callers that were unaware of the new API so they can be audited. Give the wrapper functions resolve_refdup and read_ref_full the same treatment for consistency. Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-02stylefix: asterisks stick to the variable, not the typeLibravatar David Aguilar1-1/+1
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-27reflog-walk.c: rearrange xcalloc argumentsLibravatar Brian Gesiak1-4/+4
xcalloc() takes two arguments: the number of elements and their size. reflog-walk.c includes several calls to xcalloc() that pass the arguments in reverse order. Rearrange them so they are in the correct order. Signed-off-by: Brian Gesiak <modocache@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-18Merge branch 'sh/use-hashcpy'Libravatar Junio C Hamano1-2/+2
* sh/use-hashcpy: Use hashcpy() when copying object names
2014-03-06Use hashcpy() when copying object namesLibravatar Sun He1-2/+2
We invented hashcpy() to keep the abstraction of "object name" behind it. Use it instead of calling memcpy() with hard-coded 20-byte length when moving object names between pieces of memory. Leave ppc/sha1.c as-is, because the function is about the SHA-1 hash algorithm whose output is and will always be 20 bytes. Helped-by: Michael Haggerty <mhagger@alum.mit.edu> Helped-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Sun He <sunheehnus@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-03reflog-walk.c: use ALLOC_GROW()Libravatar Dmitry S. Dolzhenko1-10/+2
Use ALLOC_GROW() instead of open-coding it in add_commit_info() and read_one_reflog(). Signed-off-by: Dmitry S. Dolzhenko <dmitrys.dolzhenko@yandex.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-11Merge branch 'jk/maint-reflog-walk-count-vs-time'Libravatar Junio C Hamano1-6/+16
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and "log -g", depending on how the starting point ("master" vs "master@{0}" vs "master@{now}") and date formatting options (e.g. "--date=iso") are given on the command line. By Jeff King (4) and Junio C Hamano (1) * jk/maint-reflog-walk-count-vs-time: reflog-walk: tell explicit --date=default from not having --date at all reflog-walk: always make HEAD@{0} show indexed selectors reflog-walk: clean up "flag" field of commit_reflog struct log: respect date_mode_explicit with --format:%gd t1411: add more selector index/date tests
2012-05-07reflog-walk: tell explicit --date=default from not having --date at allLibravatar Junio C Hamano1-4/+4
Introduction of opt->date_mode_explicit was a step in the right direction, but lost that crucial bit at the very end of the callchain, and the callee could not tell an explicitly specified "I want *date* but in default format" from the built-in default value passed when there was no --date specified. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-04reflog-walk: always make HEAD@{0} show indexed selectorsLibravatar Jeff King1-1/+2
When we are showing reflog selectors during a walk, we infer from context whether the user wanted to see the index in each selector, or the reflog date. The current rules are: 1. if the user asked for an explicit date format in the output, show the date 2. if the user asked for ref@{now}, show the date 3. if neither is true, show the index However, if we see "ref@{0}", that should be a strong clue that the user wants to see the counted version. In fact, it should be much stronger than the date format in (1). The user may have been setting the date format to use in another part of the output (e.g., in --format="%gd (%ad)", they may have wanted to influence the author date). This patch flips the rules to: 1. if the user asked for ref@{0}, always show the index 2. if the user asked for ref@{now}, always show the date 3. otherwise, we have just "ref"; show them counted by default, but respect the presence of "--date" as a clue that the user wanted them date-based Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-04reflog-walk: clean up "flag" field of commit_reflog structLibravatar Jeff King1-3/+12
When we prepare to walk a reflog, we parse the specification and pull some information from it, such as which reflog to look in (e.g., HEAD), and where to start (e.g., HEAD@{10} or HEAD@{yesterday}). The resulting struct has a "recno" field to show where in the reflog we are starting. It also has a "flag" field; if true, it means the recno field came from parsing a date like HEAD@{yesterday}. There are two problems with this: 1. "flag" is an absolutely terrible name, as it conveys nothing about the meaning 2. you can tell "HEAD" from "HEAD@{yesterday}", but you can't differentiate "HEAD" from "HEAD{0}" This patch converts the flag into a tri-state (and gives it a better name!). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-22Merge branch 'jk/pretty-reglog-ent'Libravatar Junio C Hamano1-0/+12
* jk/pretty-reglog-ent: pretty: give placeholders to reflog identity
2011-12-16pretty: give placeholders to reflog identityLibravatar Jeff King1-0/+12
When doing a reflog walk, you can get some information about the reflog (such as the subject line), but not the identity information (i.e., name and email). Let's make those available, mimicing the options for author and committer identity. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13Convert resolve_ref+xstrdup to new resolve_refdup functionLibravatar Nguyễn Thái Ngọc Duy1-7/+8
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05Copy resolve_ref() return value for longer useLibravatar Nguyễn Thái Ngọc Duy1-1/+4
resolve_ref() may return a pointer to a static buffer. Callers that use this value longer than a couple of statements should copy the value to avoid some hidden resolve_ref() call that may change the static buffer's value. The bug found by Tony Wang <wwwjfy@gmail.com> in builtin/merge.c demonstrates this. The first call is in cmd_merge() branch = resolve_ref("HEAD", head_sha1, 0, &flag); Then deep in lookup_commit_or_die() a few lines after, resolve_ref() may be called again and destroy "branch". lookup_commit_or_die lookup_commit_reference lookup_commit_reference_gently parse_object lookup_replace_object do_lookup_replace_object prepare_replace_object for_each_replace_ref do_for_each_ref get_loose_refs get_ref_dir get_ref_dir resolve_ref All call sites are checked and made sure that xstrdup() is called if the value should be saved. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-12Merge branch 'jk/maint-reflog-bottom'Libravatar Junio C Hamano1-1/+0
* jk/maint-reflog-bottom: reflogs: clear flags properly in corner case
2010-11-23reflogs: clear flags properly in corner caseLibravatar Jeff King1-1/+0
The reflog-walking mechanism is based on the regular revision traversal. We just rewrite the parents of each commit in fake_reflog_parent to point to the commit in the next reflog entry instead of the real parents. However, the regular revision traversal tries not to show the same commit twice, and so sets the SHOWN flag on each commit it shows. In a reflog, however, we may want to see the same commit more than once if it appears in the reflog multiple times (which easily happens, for example, if you do a reset to a prior state). The fake_reflog_parent function takes care of this by clearing flags, including SHOWN. Unfortunately, it does so at the very end of the function, and it is possible to return early from the function if there is no fake parent to set up (e.g., because we are at the very first reflog entry on the branch). In such a case the flag is not cleared, and the entry is skipped by the revision traversal machinery as already shown. You can see this by walking the log of a ref which is set to its very first commit more than once (the test below shows such a situation). In this case the reflog walk will fail to show the entry for the initial creation of the ref. We don't want to simply move the flag-clearing to the top of the function; we want to make sure flags set during the fake-parent installation are also cleared. Instead, let's hoist the flag-clearing out of the fake_reflog_parent function entirely. It's not really about fake parents anyway, and the only caller is the get_revision machinery. Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-27string_list: Fix argument order for string_list_lookupLibravatar Julian Phillips1-1/+1
Update the definition and callers of string_list_lookup to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-27string_list: Fix argument order for string_list_insertLibravatar Julian Phillips1-1/+1
Update the definition and callers of string_list_insert to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-19Introduce new pretty formats %g[sdD] for reflog informationLibravatar Thomas Rast1-3/+32
Add three new --pretty=format escapes: %gD long reflog descriptor (e.g. refs/stash@{0}) %gd short reflog descriptor (e.g. stash@{0}) %gs reflog message This is achieved by passing down the reflog info, if any, inside the pretty_print_context struct. We use the newly refactored get_reflog_selector(), and give it some extra functionality to extract a shortened ref. The shortening is cached inside the commit_reflogs struct; the only allocation of it happens in read_complete_reflog(), where it is initialised to 0. Also add another helper get_reflog_message() for the message extraction. Note that the --format="%h %gD: %gs" tests may not work in real repositories, as the --pretty formatter doesn't know to leave away the ": " on the last commit in an incomplete (because git-gc removed the old part) reflog. This equivalence is nevertheless the main goal of this patch. Thanks to Jeff King for reviews, the %gd testcase and documentation. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-19reflog-walk: refactor the branch@{num} formattingLibravatar Thomas Rast1-22/+32
We'll use the same output in an upcoming commit, so refactor its formatting (which was duplicated anyway) into a separate function. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-01Fix a bunch of pointer declarations (codestyle)Libravatar Felipe Contreras1-1/+1
Essentially; s/type* /type */ as per the coding guidelines. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-20make oneline reflog dates more consistent with multiline formatLibravatar Jeff King1-5/+7
The multiline reflog format (e.g., as shown by "git log -g") will show HEAD@{<date>} rather than HEAD@{<count>} in two situations: 1. If the user gave branch@{<date>} syntax to specify the reflog 2. If the user gave a --date=<format> specifier It uses the "normal" date format in case 1, and the user-specified format in case 2. The oneline reflog format (e.g., "git reflog show" or "git log -g --oneline") will show the date in the same two circumstances. However, it _always_ shows the date as a relative date, and it always ignores the timezone. In case 2, it seems ridiculous to trigger the date but use a format totally different from what the user requested. For case 1, it is arguable that the user might want to see the relative date by default; however, the multiline version shows the normal format. This patch does three things: - refactors the "relative_date" parameter to show_reflog_message to be an actual date_mode enum, since this is how it is used (it is passed to show_date) - uses the passed date_mode parameter in the oneline format (making it consistent with the multiline format) - does not ignore the timezone parameter in oneline mode Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Rename path_list to string_listLibravatar Johannes Schindelin1-5/+5
The name path_list was correct for the first usage of that data structure, but it really is a general-purpose string list. $ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list) $ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list) $ git mv path-list.h string-list.h $ git mv path-list.c string-list.c $ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path) $ perl -i -pe 's/path/string/g' string-list.[ch] $ git mv Documentation/technical/api-path-list.txt \ Documentation/technical/api-string-list.txt $ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths) ... and then fix all users of string-list to access the member "string" instead of "path". Documentation/technical/api-string-list.txt needed some rewrapping, too. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-24git log -g: Complain, but do not fail, when no reflogs are thereLibravatar Johannes Schindelin1-3/+4
When asking "git log -g --all", clearly you want to see only those refs that do have reflogs, but you do not want it to fail, either. So instead of die()ing, complain about it, but move on to the other refs. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-02-08log --reflog: use dwim_logLibravatar Johannes Schindelin1-0/+13
Since "git log origin/master" uses dwim_log() to match "refs/remotes/origin/master", it makes sense to do that for "git log --reflog", too. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-08log --reflog: honour --relative-dateLibravatar Johannes Schindelin1-5/+7
If you say "git log -g --relative-date", it is very likely that you want to see the reflog names in terms of a relative date. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-01Teach the '@{...}' notation to git-log -gLibravatar Johannes Schindelin1-0/+8
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28git-log -g --pretty=oneline should display the reflog messageLibravatar Nicolas Pitre1-1/+1
In the context of reflog output the reflog message is more useful than the commit message's first line. When relevant the reflog message will contain that line anyway. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-20--walk-reflogs: actually find the right commit by date.Libravatar Johannes Schindelin1-1/+1
Embarassing thinko. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-01-20Fix --walk-reflog with --pretty=onelineLibravatar Junio C Hamano1-11/+22
Now, "git log --abbrev-commit --pretty=o --walk-reflogs HEAD" is reasonably pleasant to use. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-20reflog-walk: build fixesLibravatar Junio C Hamano1-0/+1
Dependency on reflog-walk.h was missing in the Makefile, and reflog-walk.c did not even include it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-20--walk-reflogs: disallow uninteresting commitsLibravatar Johannes Schindelin1-0/+3
Do not allow uninteresting commits with --walk-reflogs, since it is not clear what should be shown in these cases: $ git log --walk-reflogs master..next $ git log --walk-reflogs ^master Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-01-20Teach the revision walker to walk by reflogs with --walk-reflogsLibravatar Johannes Schindelin1-0/+235
When called with "--walk-reflogs", as long as there are reflogs available, the walker will take this information into account, rather than the parent information in the commit object. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>