| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If receive.denyNonFastforwards is set to true, git-receive-pack will deny
non fast-forwards, i.e. forced updates. Most notably, a push to a repository
which has that flag set will fail.
As a first user, 'git-init-db --shared' sets this flag, since in a shared
setup, you are most unlikely to want forced pushes to succeed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Mark Wooding noticed there was a type mismatch warning in git.c; this
patch does things slightly differently (mostly tightening const) and
was what I was holding onto, waiting for the setup-revisions change
to be merged into the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
ISO C99 (and GCC 3.x or later) lets you write a flexible array
at the end of a structure, like this:
struct frotz {
int xyzzy;
char nitfol[]; /* more */
};
GCC 2.95 and 2.96 let you to do this with "char nitfol[0]";
unfortunately this is not allowed by ISO C90.
This declares such construct like this:
struct frotz {
int xyzzy;
char nitfol[FLEX_ARRAY]; /* more */
};
and git-compat-util.h defines FLEX_ARRAY to 0 for gcc 2.95 and
empty for others.
If you are using a C90 C compiler, you should be able
to override this with CFLAGS=-DFLEX_ARRAY=1 from the
command line of "make".
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the protocol between git-send-pack/git-receive-pack
in a backward compatible way to allow failures at the receiving
end to be propagated back to the sender. Most notably, versions
of git-push before this could not notice if the update hook on
the receiving end refused to update the ref for its own policy
reasons.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
fprintf and die sometimes have missing/excessive "\n" in their arguments,
correct the strings where I think it would be appropriate.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When calling post-update hook, don't leave stdin and stdout connected to
the pushing connection.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch basically just removes the redundant code from
{receive,upload}-pack.c in favour of the library code in path.c.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Using git-check-ref-format, make sure we do not create refs with
funny names when cloning from elsewhere (clone-pack), fast forwarding
local heads (git-fetch), or somebody pushes into us (receive-pack).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This reverts 6c5f9baa3bc0d63e141e0afc23110205379905a4 commit, whose
change breaks gcc-2.95.
Not that I ignore portability to compilers that are properly C99, but
keeping compilation with GCC working is more important, at least for
now. We would probably end up declaring with "name[1]" and teach the
allocator to subtract one if we really aimed for portability, but that
is left for later rounds.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Solaris 8 doesn't have the newer unsetenv() and setenv()
functions, so replace them with putenv(). The one use of
unsetenv() in fsck-cache.c now sets GIT_ALTERNATE_OBJECT_
DIRECTORIES to the empty string. Every place that var
is used, NULLs are also replaced with empty strings, so
it's ok.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
|
|
C99 denotes variable-sized members with [], not [0].
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
|
|
It does not matter if the only refs you push are directly
underneath heads and tags, but we forgot to make sure we have
leading directories so pushing tags/v0.99/1 would not have
worked.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The earlier one conflated update and post-update hooks for no
good reason. Correct that ugly hack. Now post-update hooks
will take the list of successfully updated refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Just before updating a ref,
$GIT_DIR/hooks/update refname old-sha1 new-sha1
is called if executable. The hook can decline the ref to be
updated by exiting with a non-zero status, or allow it to be
updated by exiting with a zero status. The mechanism also
allows e.g sending of a mail with pushed commits on the remote
repository.
Documentation update with an example hook is included.
jc: The credits of the basic idea and initial implementation go
to Josef, but I ended up rewriting major parts of his patch, so
bugs are all mine. Also I changed the semantics for the hook
from his original version (which were post-update hook) so that
the hook can optionally decline to update the ref, and also can
be used to implement the overall cleanups. The latter was
primarily to implement a suggestion from Linus that calling
update-server-info should be made optional.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The git-update-server-info command prepares informational files
to help clients discover the contents of a repository, and pull
from it via a dumb transport protocols. Currently, the
following files are produced.
- The $repo/info/refs file lists the name of heads and tags
available in the $repo/refs/ directory, along with their
SHA1. This can be used by git-ls-remote command running on
the client side.
- The $repo/info/rev-cache file describes the commit ancestry
reachable from references in the $repo/refs/ directory. This
file is in an append-only binary format to make the server
side friendly to rsync mirroring scheme, and can be read by
git-show-rev-cache command.
- The $repo/objects/info/pack file lists the name of the packs
available, the interdependencies among them, and the head
commits and tags contained in them. Along with the other two
files, this is designed to help clients to make smart pull
decisions.
The git-receive-pack command is changed to invoke it at the end,
so just after a push to a public repository finishes via "git
push", the server info is automatically updated.
In addition, building of the rev-cache file can be done by a
standalone git-build-rev-cache command separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Do the default "try xyz.git xyz fails" thing for the directory we get
passed in.
|
|
IIRC our strategy was to let the users' umask take care of the
final mode bits. This patch fixes places that deviate from it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Mainly making a lot of local functions and variables be marked "static",
but there was a "zero as NULL" warning in there too.
|
|
It needed to take the GIT_DIR information into account, something that
the original receive-pack usage just never cared about.
|
|
This turns it into a generic "do xyz for each ref" library function.
|
|
This makes the receiver always send a full list of valid refs, which
will allow us to do better packs, as well as handle creation of new
refs. Eventually. Right now we just moved the matching and enabled it.
So now you can do
git-send-pack host:path branch1 branch2
to only send branches "branch1" and "branch2".
|
|
A "old ref" of all zeroes is considered a "don't care" ref, and allows
us to say "write the new ref regardless of what the old ref contained
(or even if it existed at all)".
This allows (if git-send-pack were to do it) creating new refs, and
fixing up old ones.
|
|
After unpacking the object pack successfully, we go through the list of
refs, and verify that they still contain their expected values. Then we
replace them with the new ones.
|
|
We don't act on them yet, but we parse them.
|
|
|
|
|
|
It's not working yet, but it's at the point where I want to be able to
track my changes. The theory of operation is that this is the "remote"
side of a "git push". It can tell us what references the remote side
has, receives out reference update commands and a pack-file, and can
execute the unpacking command.
|
Johannes Schindelin
Shawn Pearce
David Rientjes
Junio C Hamano
Michal Ostrowski
Alex Riesen
Daniel Barkalow
Andreas Ericsson
Jason Riedy
A Large Angry SCM
Josef Weidendorfer
Linus Torvalds
Linus Torvalds