| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
|
|
Once upon a time, git's in-memory representation of a cache
entry actually pointed to the mmap'd on-disk data. So in
520fc24 (Allow writing to the private index file mapping.,
2005-04-26), we specified PROT_WRITE so that we could tweak
the entries while we run (in our own MAP_PRIVATE copy-on-write
version, of course).
Later, 7a51ed6 (Make on-disk index representation separate
from in-core one, 2008-01-14) stopped doing this; we copy
the data into our in-core representation, and then drop the
mmap immediately. We can therefore drop the PROT_WRITE flag.
It's probably not hurting anything as it is, but it's
potentially confusing.
Note that we could also mark the mapping as "const" to
verify that we never write to it. However, we don't
typically do that for our other maps, as it then requires
casting to munmap() it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
|
|
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
|
|
`ce` is allocated in make_cache_entry and should be freed if it is not
used any more. refresh_cache_entry as a wrapper around refresh_cache_ent
will either return
- the `ce` given as the parameter, when it was up-to-date;
- a new updated cache entry which is allocated to new memory; or
- a NULL when refreshing failed.
In the latter two cases, the original cache-entry `ce` is not used
and needs to be freed. The rule can be expressed as "if the return
value from refresh is different from the original ce, ce is no
longer used."
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allocate a cache-entry pretty early in the function and then
decide either not to do anything when we are pretending to add, or
add it and then get an error (another possibility is obviously to
succeed).
When pretending or failing to add, we forgot to free the
cache-entry.
Noticed during a discussion on Stefan's patch to change the coding
style without fixing the issue ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This frees `ce` would be leaking in the error path.
Additionally a free is moved towards the return. This helps code
readability as we often have this pattern of freeing resources just
before return/exit and not in between the code.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The split index extension uses ewah bitmaps to mark index entries as
deleted, instead of removing them from the index directly. This can
result in an on-disk index, in which entries of stage #0 and higher
stages appear, which are removed later when the index bases are merged.
15999d0 read_index_from(): catch out of order entries when reading an
index file introduces a check which checks if the entries are in order
after each index entry is read in do_read_index. This check may however
fail when a split index is read.
Fix this by moving checking the index after we know there is no split
index or after the split index bases are successfully merged instead.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"update-index --refresh" used to leak when an entry cannot be
refreshed for whatever reason.
* sb/plug-leak-in-make-cache-entry:
read-cache.c: free cache entry when refreshing fails
|
|
This fixes a memory leak when building the cache entries as
refresh_cache_entry may decide to return NULL, but it does not
free the cache entry structure which was passed in as an argument.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.1:
Git 2.1.4
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-2.0:
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.9:
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.8.5:
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not allow ".git" to enter into the index as a path
component, because checking out the result to the working
tree may causes confusion for subsequent git commands.
However, on case-insensitive file systems, ".Git" or ".GIT"
is the same. We should catch and prevent those, too.
Note that technically we could allow this for repos on
case-sensitive filesystems. But there's not much point. It's
unlikely that anybody cares, and it creates a repository
that is unexpectedly non-portable to other systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
lockfile.c contains the general API for locking any file. Code
specifically about the index file doesn't belong here.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
commit_locked_index(), when writing to an alternate index file,
duplicates (poorly) the code in commit_lock_file(). And anyway, it
shouldn't have to know so much about the internal workings of lockfile
objects. So extract a new function commit_lock_file_to() that does the
work common to the two functions, and call it from both
commit_lock_file() and commit_locked_index().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For now, we still make sure to allocate at least PATH_MAX characters
for the strbuf because resolve_symlink() doesn't know how to expand
the space for its return value. (That will be fixed in a moment.)
Another alternative would be to just use a strbuf as scratch space in
lock_file() but then store a pointer to the naked string in struct
lock_file. But lock_file objects are often reused. By reusing the
same strbuf, we can avoid having to reallocate the string most times
when a lock_file object is reused.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because remove_lock_file() can be called any time by the signal
handler, it is important that any lock_file objects that are in the
lock_file_list are always in a valid state. And since lock_file
objects are often reused (but are never removed from lock_file_list),
that means we have to be careful whenever mutating a lock_file object
to always keep it in a well-defined state.
This was formerly not the case, because part of the state was encoded
by setting lk->filename to the empty string vs. a valid filename. It
is wrong to assume that this string can be updated atomically; for
example, even
strcpy(lk->filename, value)
is unsafe. But the old code was even more reckless; for example,
strcpy(lk->filename, path);
if (!(flags & LOCK_NODEREF))
resolve_symlink(lk->filename, max_path_len);
strcat(lk->filename, ".lock");
During the call to resolve_symlink(), lk->filename contained the name
of the file that was being locked, not the name of the lockfile. If a
signal were raised during that interval, then the signal handler would
have deleted the valuable file!
We could probably continue to use the filename field to encode the
state by being careful to write characters 1..N-1 of the filename
first, and then overwrite the NUL at filename[0] with the first
character of the filename, but that would be awkward and error-prone.
So, instead of using the filename field to determine whether the
lock_file object is active, add a new field "lock_file::active" for
this purpose. Be careful to set this field only when filename really
contains the name of a file that should be deleted on cleanup.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/refresh-beyond-symlink:
read-cache: check for leading symlinks when refreshing index
|
|
A broken reimplementation of Git could write an invalid index that
records both stage #0 and higher stage entries for the same path.
Notice and reject such an index, as there is no sensible fallback
(we do not know if the broken tool wanted to resolve and forgot to
remove higher stage entries, or if it wanted to unresolve and
forgot to remove the stage#0 entry).
* jp/index-with-corrupt-stages:
read_index_unmerged(): remove unnecessary loop index adjustment
read_index_from(): catch out of order entries when reading an index file
|
|
Update git_config() users with callback functions for a very narrow
scope with calls to config-set API that lets us query a single
variable.
* ta/config-set-2:
builtin/apply.c: replace `git_config()` with `git_config_get_string_const()`
merge-recursive.c: replace `git_config()` with `git_config_get_int()`
ll-merge.c: refactor `read_merge_config()` to use `git_config_string()`
fast-import.c: replace `git_config()` with `git_config_get_*()` family
branch.c: replace `git_config()` with `git_config_get_string()
alias.c: replace `git_config()` with `git_config_get_string()`
imap-send.c: replace `git_config()` with `git_config_get_*()` family
pager.c: replace `git_config()` with `git_config_get_value()`
builtin/gc.c: replace `git_config()` with `git_config_get_*()` family
rerere.c: replace `git_config()` with `git_config_get_*()` family
fetchpack.c: replace `git_config()` with `git_config_get_*()` family
archive.c: replace `git_config()` with `git_config_get_bool()` family
read-cache.c: replace `git_config()` with `git_config_get_*()` family
http-backend.c: replace `git_config()` with `git_config_get_bool()` family
daemon.c: replace `git_config()` with `git_config_get_bool()` family
|
|
"git add x" where x that used to be a directory has become a
symbolic link to a directory misbehaved.
* rs/refresh-beyond-symlink:
read-cache: check for leading symlinks when refreshing index
|
|
Signed-off-by: Jaime Soriano Pastor <jsorianopastor@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jaime Soriano Pastor <jsorianopastor@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't add paths with leading symlinks to the index while refreshing; we
only track those symlinks themselves. We already ignore them while
preloading (see read_index_preload.c).
Reported-by: Nikolay Avdeev <avdeev@math.vsu.ru>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use `git_config_get_*()` family instead of `git_config()` to take
advantage of the config-set API which provides a cleaner control flow.
Use an intermediate value, as `version` can not be used directly in
git_config_get_int() due to incompatible type.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
|
|
"git status", even though it is a read-only operation, tries to
update the index with refreshed lstat(2) info to optimize future
accesses to the working tree opportunistically, but this could
race with a "read-write" operation that modify the index while it
is running. Detect such a race and avoid overwriting the index.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
|
|
We often represent our strings as a counted string, i.e. a pair of
the pointer to the beginning of the string and its length, and the
string may not be NUL terminated to that length.
To compare a pair of such counted strings, unpack-trees.c and
read-cache.c implement their own name_compare() functions
identically. In addition, the cache_name_compare() function in
read-cache.c is nearly identical. The only difference is when one
string is the prefix of the other string, in which case
name_compare() returns -1/+1 to show which one is longer, and
cache_name_compare() returns the difference of the lengths to show
the same information.
Unify these three functions by using the implementation from
cache_name_compare(). This does not make any difference to the
existing and future callers, as they must be paying attention only
to the sign of the returned value (and not the magnitude) because
the original implementations of these two functions return values
returned by memcmp(3) when the one string is not a prefix of the
other string, and the only thing memcmp(3) guarantees its callers is
the sign of the returned value, not the magnitude.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This could be used to run the whole test suite with split
indexes. Index splitting is carried out at random. "git read-tree"
also resets the index and forces splitting at the next update.
I had a lot of headaches with the test suite, which proves it
exercises split index pretty good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just a (paranoid?) safety measure..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If $GIT_DIR is read only, we can't write $GIT_DIR/sharedindex. This
could happen when $GIT_INDEX_FILE is set to somehwere outside
$GIT_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you have a large work tree but only make changes in a subset, then
$GIT_DIR/index's size should be stable after a while. If you change
branches that touch something else, $GIT_DIR/index's size may grow
large that it becomes as slow as the unified index. Do --split-index
again occasionally to force all changes back to the shared index and
keep $GIT_DIR/index small.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We know the positions of replaced entries via the replace bitmap in
"link" extension, so the "name" path does not have to be stored (it's
still in the shared index). With this, we also have a way to
distinguish additions vs replacements at load time and can catch
broken "link" extensions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are sure that after merge_base_index() is done. cache-tree can
still be used with the final index. So don't destroy cache tree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CE_REMOVE'd entries are removed here because only parts of the code
base (unpack_trees in fact) test this bit when they look for the
presence of an entry. Leaving them may confuse the code ignores this
bit and expects to see a real entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The large part of this patch just follows CE_ENTRY_CHANGED
marks. replace_index_entry() is updated to update
split_index->base->cache[] as well so base->cache[] does not reference
to a freed entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Entries that belong to the base index should not be freed. Mark
CE_REMOVE to track them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure entry addition does not lead to unifying the index. We don't
need to explicitly keep track of new entries. If ce->index is zero,
they're new. Otherwise it's unlikely that they are new, but we'll do a
thorough check later at writing time.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also update SHA-1 after writing. If we do not do that, the second
read_index() will see "initialized" variable already set and not read
.git/index again, which is fine, except istate->sha1 now has a stale
value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cache entry additions, removals and modifications are separated
out. The rest of changes are still in the catch-all flag
SOMETHING_CHANGED, which would be more specific later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
remove_marked_cache_entries() deletes entries marked with
CE_REMOVE. But if there is no such entry, do not mark the index as
"changed" because that could trigger an index update unnecessarily.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Stefan Beller
Thomas Gummerer
Johannes Schindelin
Michael Haggerty
Jaime Soriano Pastor
René Scharfe
Tanay Abhra
Jeremiah Mahler
Nguyễn Thái Ngọc Duy