| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Various operating modes of "git reset" have been made to work
better with the sparse index.
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
|
|
Ensure that the sparseness of the in-core index matches the
index.sparse configuration specified by the repository immediately
after the on-disk index file is read.
* vd/sparse-sparsity-fix-on-read:
sparse-index: update do_read_index to ensure correct sparsity
sparse-index: add ensure_correct_sparsity function
sparse-index: avoid unnecessary cache tree clearing
test-read-cache.c: prepare_repo_settings after config init
|
|
Remove `ensure_full_index` guard on `prime_cache_tree` and update
`prime_cache_tree_rec` to correctly reconstruct sparse directory entries in
the cache tree. While processing a tree's entries, `prime_cache_tree_rec`
must determine whether a directory entry is sparse or not by searching for
it in the index (*without* expanding the index). If a matching sparse
directory index entry is found, no subtrees are added to the cache tree
entry and the entry count is set to 1 (representing the sparse directory
itself). Otherwise, the tree is assumed to not be sparse and its subtrees
are recursively added to the cache tree.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless `command_requires_full_index` forces index expansion, ensure in-core
index sparsity matches config settings on read by calling
`ensure_correct_sparsity`. This makes the behavior of the in-core index more
consistent between different methods of updating sparsity: manually changing
the `index.sparse` config setting vs. executing
`git sparse-checkout --[no-]sparse-index init`
Although index sparsity is normally updated with `git sparse-checkout init`,
ensuring correct sparsity after a manual `index.sparse` change has some
practical benefits:
1. It allows for command-by-command sparsity toggling with
`-c index.sparse=<true|false>`, e.g. when troubleshooting issues with the
sparse index.
2. It prevents users from experiencing abnormal slowness after setting
`index.sparse` to `true` due to use of a full index in all commands until
the on-disk index is updated.
Helped-by: Junio C Hamano <gitster@pobox.com>
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop "git add --dry-run" from creating new blob and tree objects.
* rs/add-dry-run-without-objects:
add: don't write objects with --dry-run
|
|
Recent sparse-index work broke safety against attempts to add paths
with trailing slashes to the index, which has been corrected.
* rs/make-verify-path-really-verify-again:
read-cache: let verify_path() reject trailing dir separators again
read-cache: add verify_path_internal()
t3905: show failure to ignore sub-repo
|
|
When the option --dry-run/-n is given, "git add" doesn't change the
index, but still writes out new object files. Only hash the latter
without writing instead to make the run as dry as possible.
Use this opportunity to also make the hash_flags variable unsigned,
to match the index_path() parameter it is used as.
Reported-by: git.mexon@spamgourmet.com
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test updates.
* sg/test-split-index-fix:
read-cache: fix GIT_TEST_SPLIT_INDEX
tests: disable GIT_TEST_SPLIT_INDEX for sparse index tests
read-cache: look for shared index files next to the index, too
t1600-index: disable GIT_TEST_SPLIT_INDEX
t1600-index: don't run git commands upstream of a pipe
t1600-index: remove unnecessary redirection
|
|
6e773527b6 (sparse-index: convert from full to sparse, 2021-03-30) made
verify_path() accept trailing directory separators for directories,
which is necessary for sparse directory entries. This clemency causes
"git stash" to stumble over sub-repositories, though, and there may be
more unintended side-effects.
Avoid them by restoring the old verify_path() behavior and accepting
trailing directory separators only in places that are supposed to handle
sparse directory entries.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Turn verify_path() into an internal function that distinguishes between
valid paths and those with trailing directory separators and rename it
to verify_path_internal(). Provide a wrapper with the old behavior
under the old name. No functional change intended. The new function
will be used in the next patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ab/repo-settings-cleanup:
repository.h: don't use a mix of int and bitfields
repo-settings.c: simplify the setup
read-cache & fetch-negotiator: check "enum" values in switch()
environment.c: remove test-specific "ignore_untracked..." variable
wrapper.c: add x{un,}setenv(), and use xsetenv() in environment.c
|
|
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change tweak_untracked_cache() in "read-cache.c" to use a switch() to
have the compiler assert that we checked all possible values in the
"enum untracked_cache_setting" type, and likewise remove the "default"
case in fetch_negotiator_init() in favor of checking for
"FETCH_NEGOTIATION_UNSET" and "FETCH_NEGOTIATION_NONE".
As will be discussed in a subsequent we'll only ever have either of
these set to FETCH_NEGOTIATION_NONE, FETCH_NEGOTIATION_UNSET and
UNTRACKED_CACHE_UNSET within the prepare_repo_settings() function
itself. In preparation for fixing that code let's add a BUG() here to
mark this as unreachable code.
See ad0fb659993 (repo-settings: parse core.untrackedCache, 2019-08-13)
for when the "unset" and "keep" handling for core.untrackedCache was
consolidated, and aaf633c2ad1 (repo-settings: create
feature.experimental setting, 2019-08-13) for the addition of the
"default" pattern in "fetch-negotiator.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running tests with GIT_TEST_SPLIT_INDEX=1 is supposed to turn on the
split index feature and trigger index splitting (mostly) randomly.
Alas, this has been broken since 6e37c8ed3c (read-cache.c: fix writing
"link" index ext with null base oid, 2019-02-13), and
GIT_TEST_SPLIT_INDEX=1 hasn't triggered any index splitting since
then.
This patch makes GIT_TEST_SPLIT_INDEX work again, though it doesn't
restore the pre-6e37c8ed3c behavior. To understand the bug, the fix,
and the behavior change we first have to look at how
GIT_TEST_SPLIT_INDEX used to work before 6e37c8ed3c:
There are two places where we check the value of
GIT_TEST_SPLIT_INDEX, and before 6e37c8ed3c they worked like this:
1) In the lower-level do_write_index(), where, if
GIT_TEST_SPLIT_INDEX is enabled, we call init_split_index().
This call merely allocates and zero-initializes
'istate->split_index', but does nothing else (i.e. doesn't fill
the base/shared index with cache entries, doesn't actually
write a shared index file, etc.). Pertinent to this issue, the
hash of the base index remains all zeroed out.
2) In the higher-level write_locked_index(), but only when
'istate->split_index' has already been initialized. Then, if
GIT_TEST_SPLIT_INDEX is enabled, it randomly sets the flag that
triggers index splitting later in this function. This
randomness comes from the first byte of the hash of the base
index via an 'if ((first_byte & 15) < 6)' condition.
However, if 'istate->split_index' hasn't been initialized (i.e.
it is still NULL), then write_locked_index() just calls
do_write_locked_index(), which internally calls the above
mentioned do_write_index().
This means that while GIT_TEST_SPLIT_INDEX=1 usually triggered index
splitting randomly, the first two index writes were always
deterministic (though I suspect this was unintentional):
- The initial index write never splits the index.
During the first index write write_locked_index() is called with
'istate->split_index' still uninitialized, so the check in 2) is
not executed. It still calls do_write_index(), though, which
then executes the check in 1). The resulting all zero base
index hash then leads to the 'link' extension being written to
'.git/index', though a shared index file is not written:
$ rm .git/index
$ GIT_TEST_SPLIT_INDEX=1 git update-index --add file
$ test-tool dump-split-index .git/index
own c6ef71168597caec8553c83d9d0048f1ef416170
base 0000000000000000000000000000000000000000
100644 d00491fd7e5bb6fa28c517a0bb32b8b506539d4d 0 file
replacements:
deletions:
$ ls -l .git/sharedindex.*
ls: cannot access '.git/sharedindex.*': No such file or directory
- The second index write always splits the index.
When the index written in the previous point is read,
'istate->split_index' is initialized because of the presence of
the 'link' extension. So during the second write
write_locked_index() does run the check in 2), and the first
byte of the all zero base index hash always fulfills the
randomness condition, which in turn always triggers the index
splitting.
- Subsequent index writes will find the 'link' extension with a
real non-zero base index hash, so from then on the check in 2)
is executed and the first byte of the base index hash is as
random as it gets (coming from the SHA-1 of index data including
timestamps and inodes...).
All this worked until 6e37c8ed3c came along, and stopped writing the
'link' extension if the hash of the base index was all zero:
$ rm .git/index
$ GIT_TEST_SPLIT_INDEX=1 git update-index --add file
$ test-tool dump-split-index .git/index
own abbd6f6458d5dee73ae8e210ca15a68a390c6fd7
not a split index
$ ls -l .git/sharedindex.*
ls: cannot access '.git/sharedindex.*': No such file or directory
So, since the first index write with GIT_TEST_SPLIT_INDEX=1 doesn't
write a 'link' extension, in the second index write
'istate->split_index' remains uninitialized, and the check in 2) is
not executed, and ultimately the index is never split.
Fix this by modifying write_locked_index() to make sure to check
GIT_TEST_SPLIT_INDEX even if 'istate->split_index' is still
uninitialized, and initialize it if necessary. The check for
GIT_TEST_SPLIT_INDEX and separate init_split_index() call in
do_write_index() thus becomes unnecessary, so remove it. Furthermore,
add a test to 't1700-split-index.sh' to make sure that
GIT_TEST_SPLIT_INDEX=1 will keep working (though only check the
index splitting on the first index write, because after that it will
be random).
Note that this change does not restore the pre-6e37c8ed3c behaviour,
as it will deterministically split the index already on the first
index write. Since GIT_TEST_SPLIT_INDEX is purely a developer aid,
there is no backwards compatibility issue here. The new behaviour did
trigger test failures in 't0003-attributes.sh' and 't1600-index.sh',
though, which have been fixed in preparatory patches in this series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reading a split index git always looks for its referenced shared
base index in the gitdir of the current repository, even when reading
an alternate index specified via GIT_INDEX_FILE, and even when that
alternate index file is the "main" '.git/index' file of an other
repository. However, if that split index and its referenced shared
index files were written by a git command running entirely in that
other repository, then, naturally, the shared index file is written to
that other repository's gitdir. Consequently, a git command
attempting to read that shared index file while running in a different
repository won't be able find it and will error out.
I'm not sure in what use case it is necessary to read the index of one
repository by a git command running in a different repository, but it
is certainly possible to do so, and in fact the test 'bare repository:
check that --cached honors index' in 't0003-attributes.sh' does
exactly that. If GIT_TEST_SPLIT_INDEX=1 were to split the index in
just the right moment [1], then this test would indeed fail, because
the referenced shared index file could not be found.
Let's look for the referenced shared index file not only in the gitdir
of the current directory, but, if the shared index is not there, right
next to the split index as well.
[1] We haven't seen this issue trigger a failure in t0003 yet,
because:
- While GIT_TEST_SPLIT_INDEX=1 is supposed to trigger index
splitting randomly, the first index write has always been
deterministic and it has never split the index.
- That alternate index file in the other repository is written
only once in the entire test script, so it's never split.
However, the next patch will fix GIT_TEST_SPLIT_INDEX, and while
doing so it will slightly change its behavior to always split the
index already on the first index write, and t0003 would always
fail without this patch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convert_to_sparse() method checks for the GIT_TEST_SPARSE_INDEX
environment variable or the "index.sparse" config setting before
converting the index to a sparse one. This is for ease of use since all
current consumers are preparing to compress the index before writing it
to disk. If these settings are not enabled, then convert_to_sparse()
silently returns without doing anything.
We will add a consumer in the next change that wants to use the sparse
index as an in-memory data structure, regardless of whether the on-disk
format should be sparse.
To that end, create the SPARSE_INDEX_MEMORY_ONLY flag that will skip
these config checks when enabled. All current consumers are modified to
pass '0' in the new 'flags' parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leak plugging.
* ah/plugleaks:
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
ref-filter: also free head for ATOM_HEAD to avoid leak
diffcore-rename: move old_dir/new_dir definition to plug leak
builtin/for-each-repo: remove unnecessary argv copy to plug leak
builtin/submodule--helper: release unused strbuf to avoid leak
environment: move strbuf into block to plug leak
fmt-merge-msg: free newly allocated temporary strings when done
|
|
"git read-tree" had a codepath where blobs are fetched one-by-one
from the promisor remote, which has been corrected to fetch in bulk.
* jt/bulk-prefetch:
cache-tree: prefetch in partial clone read-tree
unpack-trees: refactor prefetching code
|
|
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
|
|
repo_diff_setup() calls through to diff.c's static prep_parse_options(),
which in turn allocates a new array into diff_opts.parseopts.
diff_setup_done() is responsible for freeing that array, and has the
benefit of verifying diff_opts too - hence we add a call to
diff_setup_done() to avoid leaking parseopts.
Output from the leak as found while running t0090 with LSAN:
Direct leak of 7120 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bf89 in do_xmalloc wrapper.c:41:8
#2 0x7a7bae in prep_parse_options diff.c:5636:2
#3 0x7a7bae in repo_diff_setup diff.c:4611:2
#4 0x93716c in repo_index_has_changes read-cache.c:2518:3
#5 0x872233 in unclean merge-ort-wrappers.c:12:14
#6 0x872233 in merge_ort_recursive merge-ort-wrappers.c:53:6
#7 0x5d5b11 in try_merge_strategy builtin/merge.c:752:12
#8 0x5d0b6b in cmd_merge builtin/merge.c:1666:9
#9 0x4ce83e in run_builtin git.c:475:11
#10 0x4ccafe in handle_builtin git.c:729:3
#11 0x4cb01c in run_argv git.c:818:4
#12 0x4cb01c in cmd_main git.c:949:19
#13 0x6bdc2d in main common-main.c:52:11
#14 0x7f551eb51349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 7120 byte(s) leaked in 1 allocation(s)
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the prefetching code in unpack-trees.c into its own function,
because it will be used elsewhere in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message update.
* ew/mmap-failures:
xmmap: inform Linux users of tuning knobs on ENOMEM
|
|
By testing 'git -c core.fsmonitor= status -uno', we can check for the
simplest index operations that can be made sparse-aware. The necessary
implementation details are already integrated with sparse-checkout, so
modify command_requires_full_index to be zero for cmd_status().
In refresh_index(), we loop through the index entries to refresh their
stat() information. However, sparse directories have no stat()
information to populate. Ignore these entries.
This allows 'git status' to no longer expand a sparse index to a full
one. This is further tested by dropping the "-uno" option and adding an
untracked file into the worktree.
The performance test p2000-sparse-checkout-operations.sh demonstrates
these improvements:
Test HEAD~1 HEAD
-----------------------------------------------------------------------------
2000.2: git status (full-index-v3) 0.31(0.30+0.05) 0.31(0.29+0.06) +0.0%
2000.3: git status (full-index-v4) 0.31(0.29+0.07) 0.34(0.30+0.08) +9.7%
2000.4: git status (sparse-index-v3) 2.35(2.28+0.10) 0.04(0.04+0.05) -98.3%
2000.5: git status (sparse-index-v4) 2.35(2.24+0.15) 0.05(0.04+0.06) -97.9%
Note that since HEAD~1 was expanding the sparse index by parsing trees,
it was artificially slower than the full index case. Thus, the 98%
improvement is misleading, and instead we should celebrate the 0.34s to
0.05s improvement of 85%. This is more indicative of the peformance
gains we are expecting by using a sparse index.
Note: we are dropping the assignment of core.fsmonitor here. This is not
necessary for the test script as we are not altering the config any
other way. Correct integration with FS Monitor will be validated in
later changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ab/progress-cleanup:
read-cache.c: don't guard calls to progress.c API
|
|
Linux users may benefit from additional information on how to
avoid ENOMEM from mmap despite the system having enough RAM to
accomodate them. We can't reliably unmap pack windows to work
around the issue since malloc and other library routines may
mmap without our knowledge.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't guard the calls to the progress.c API with "if (progress)". The
API itself will check this. This doesn't change any behavior, but
makes this code consistent with the rest of the codebase.
See ae9af12287b (status: show progress bar if refreshing the index
takes too long, 2018-09-15) for the commit that added the pattern
we're changing here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These methods were marked as MAYBE_UNUSED in the previous change to
avoid a complicated diff. Delete them entirely, since we now use the
hashfile API instead of this custom hashing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The do_write_index() method in read-cache.c has its own hashing logic
and buffering mechanism. Specifically, the ce_write() method was
introduced by 4990aadc (Speed up index file writing by chunking it
nicely, 2005-04-20) and similar mechanisms were introduced a few months
later in c38138cd (git-pack-objects: write the pack files with a SHA1
csum, 2005-06-26). Based on the timing, in the early days of the Git
codebase, I figured that these roughly equivalent code paths were never
unified only because it got lost in the shuffle. The hashfile API has
since been used extensively in other file formats, such as pack-indexes,
multi-pack-indexes, and commit-graphs. Therefore, it seems prudent to
unify the index writing code to use the same mechanism.
I discovered this disparity while trying to create a new index format
that uses the chunk-format API. That API uses a hashfile as its base, so
it is incompatible with the custom code in read-cache.c.
This rewrite is rather straightforward. It replaces all writes to the
temporary file with writes to the hashfile struct. This takes care of
many of the direct interactions with the_hash_algo.
There are still some git_hash_ctx uses remaining: the extension headers
are hashed for use in the End of Index Entries (EOIE) extension. This
use of the git_hash_ctx is left as-is. There are multiple reasons to not
use a hashfile here, including the fact that the data is not actually
writing to a file, just a hash computation. These hashes do not block
our adoption of the chunk-format API in a future change to the index, so
leave it as-is.
The internals of the algorithms are mostly identical. Previously, the
hashfile API used a smaller 8KB buffer instead of the 128KB buffer from
read-cache.c. The previous change already unified these sizes.
There is one subtle point: we do not pass the CSUM_FSYNC to the
finalize_hashfile() method, which differs from most consumers of the
hashfile API. The extra fsync() call indicated by this flag causes a
significant peformance degradation that is noticeable for quick
commands that write the index, such as "git add". Other consumers can
absorb this cost with their more complicated data structure
organization, and further writing structures such as pack-files and
commit-graphs is rarely in the critical path for common user
interactions.
Some static methods become orphaned in this diff, so I marked them as
MAYBE_UNUSED. The diff is much harder to read if they are deleted during
this change. Instead, they will be deleted in the following change.
In addition to the test suite passing, I computed indexes using the
previous binaries and the binaries compiled after this change, and found
the index data to be exactly equal. Finally, I did extensive performance
testing of "git update-index --force-write" on repos of various sizes,
including one with over 2 million paths at HEAD. These tests
demonstrated less than 1% difference in behavior. As expected, the
performance should be considered unchanged. The previous changes to
increase the hashfile buffer size from 8K to 128K ensured this change
would not create a peformance regression.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
|
|
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
|
|
"git add" and "git rm" learned not to touch those paths that are
outside of sparse checkout.
* mt/add-rm-in-sparse-checkout:
rm: honor sparse checkout patterns
add: warn when asked to update SKIP_WORKTREE entries
refresh_index(): add flag to ignore SKIP_WORKTREE entries
pathspec: allow to ignore SKIP_WORKTREE entries on index matching
add: make --chmod and --renormalize honor sparse checkouts
t3705: add tests for `git add` in sparse checkouts
add: include magic part of pathspec on --refresh error
|
|
Cygwin pathname handling fix.
* ad/cygwin-no-backslashes-in-paths:
cygwin: disallow backslashes in file names
|
|
Allow make_transient_cache_entry() to optionally receive a mem_pool
struct in which it should allocate the entry. This will be used in the
following patch, to store some transient entries which should persist
until parallel checkout finishes.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
|
|
The backslash character is not a valid part of a file name on Windows.
If, in Windows, Git attempts to write a file that has a backslash
character in the filename, it will be incorrectly interpreted as a
directory separator.
This caused CVE-2019-1354 in MinGW, as this behaviour can be manipulated
to cause the checkout to write to files it ought not write to, such as
adding code to the .git/hooks directory. This was fixed by e1d911dd4c
(mingw: disallow backslash characters in tree objects' file names,
2019-09-12). However, the vulnerability also exists in Cygwin: while
Cygwin mostly provides a POSIX-like path system, it will still interpret
a backslash as a directory separator.
To avoid this vulnerability, CVE-2021-29468, extend the previous fix to
also apply to Cygwin.
Similarly, extend the test case added by the previous version of the
commit. The test suite doesn't have an easy way to say "run this test
if in MinGW or Cygwin", so add a new test prerequisite that covers both.
As well as checking behaviour in the presence of paths containing
backslashes, the existing test also checks behaviour in the presence of
paths that differ only by the presence of a trailing ".". MinGW follows
normal Windows application behaviour and treats them as the same path,
but Cygwin more closely emulates *nix systems (at the expense of
compatibility with native Windows applications) and will create and
distinguish between such paths. Gate the relevant bit of that test
accordingly.
Reported-by: RyotaK <security@ryotak.me>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future, we'll want oidread to automatically set the hash
algorithm member for an object ID we read into it, so ensure we use
oidread instead of hashcpy everywhere we're copying a hash value into a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers to index_name_pos() or index_name_stage_pos() have a specific
path in mind. If that happens to be a path with an ancestor being a
sparse-directory entry, it can lead to unexpected results.
In the case that we did not find the requested path, check to see if the
position _before_ the inserted position is a sparse directory entry that
matches the initial segment of the input path (including the directory
separator at the end of the directory name). If so, then expand the
index to be a full index and search again. This expansion will only
happen once per index read.
Future enhancements could be more careful to expand only the necessary
sparse directory entry, but then we would have a special "not fully
sparse, but also not fully expanded" mode that could affect writing the
index to file. Since this only occurs if a specific file is requested
outside of the sparse checkout definition, this is unlikely to be a
common situation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
refresh_index() doesn't update SKIP_WORKTREE entries, but it still
matches them against the given pathspecs, marks the matches on the
seen[] array, check if unmerged, etc. In the following patch, one caller
will need refresh_index() to ignore SKIP_WORKTREE entries entirely, so
add a flag that implements this behavior.
While we are here, also realign the REFRESH_* flags and convert the hex
values to the more natural bit shift format, which makes it easier to
spot holes.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we have a full index, then we can convert it to a sparse index by
replacing directories outside of the sparse cone with sparse directory
entries. The convert_to_sparse() method does this, when the situation is
appropriate.
For now, we avoid converting the index to a sparse index if:
1. the index is split.
2. the index is already sparse.
3. sparse-checkout is disabled.
4. sparse-checkout does not use cone mode.
Finally, we currently limit the conversion to when the
GIT_TEST_SPARSE_INDEX environment variable is enabled. A mode using Git
config will be added in a later change.
The trickiest thing about this conversion is that we might not be able
to mark a directory as a sparse directory just because it is outside the
sparse cone. There might be unmerged files within that directory, so we
need to look for those. Also, if there is some strange reason why a file
is not marked with CE_SKIP_WORKTREE, then we should give up on
converting that directory. There is still hope that some of its
subdirectories might be able to convert to sparse, so we keep looking
deeper.
The conversion process is assisted by the cache-tree extension. This is
calculated from the full index if it does not already exist. We then
abandon the cache-tree as it no longer applies to the newly-sparse
index. Thus, this cache-tree will be recalculated in every
sparse-full-sparse round-trip until we integrate the cache-tree
extension with the sparse index.
Some Git commands use the index after writing it. For example, 'git add'
will update the index, then write it to disk, then read its entries to
report information. To keep the in-memory index in a full state after
writing, we re-expand it to a full one after the write. This is wasteful
for commands that only write the index and do not read from it again,
but that is only the case until we make those commands "sparse aware."
We can compare the behavior of the sparse-index in
t1092-sparse-checkout-compability.sh by using GIT_TEST_SPARSE_INDEX=1
when operating on the 'sparse-index' repo. We can also compare the two
sparse repos directly, such as comparing their indexes (when expanded to
full in the case of the 'sparse-index' repo). We also verify that the
index is actually populated with sparse directory entries.
The 'checkout and reset (mixed)' test is marked for failure when
comparing a sparse repo to a full repo, but we can compare the two
sparse-checkout cases directly to ensure that we are not changing the
behavior when using a sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The index format does not currently allow for sparse directory entries.
This violates some expectations that older versions of Git or
third-party tools might not understand. We need an indicator inside the
index file to warn these tools to not interact with a sparse index
unless they are aware of sparse directory entries.
Add a new _required_ index extension, 'sdir', that indicates that the
index may contain sparse directory entries. This allows us to continue
to use the differences in index formats 2, 3, and 4 before we create a
new index version 5 in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will mark an in-memory index_state as having sparse directory entries
with the sparse_index bit. These currently cannot exist, but we will add
a mechanism for collapsing a full index to a sparse one in a later
change. That will happen at write time, so we must first allow parsing
the format before writing it.
Commands or methods that require a full index in order to operate can
call ensure_full_index() to expand that index in-memory. This requires
parsing trees using that index's repository.
Sparse directory entries have a specific 'ce_mode' value. The macro
S_ISSPARSEDIR(ce->ce_mode) can check if a cache_entry 'ce' has this type.
This ce_mode is not possible with the existing index formats, so we don't
also verify all properties of a sparse-directory entry, which are:
1. ce->ce_mode == 0040000
2. ce->flags & CE_SKIP_WORKTREE is true
3. ce->name[ce->namelen - 1] == '/' (ends in dir separator)
4. ce->oid references a tree object.
These are all semi-enforced in ensure_full_index() to some extent. Any
deviation will cause a warning at minimum or a failure in the worst
case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CALLOC_ARRAY() macro replaces many uses of xcalloc().
* rs/calloc-array:
cocci: allow xcalloc(1, size)
use CALLOC_ARRAY
git-compat-util.h: drop trailing semicolon from macro definition
|
|
The data structure used by fsmonitor interface was not properly
duplicated during an in-core merge, leading to use-after-free etc.
* js/fsmonitor-unpack-fix:
fsmonitor: do not forget to release the token in `discard_index()`
fsmonitor: fix memory corruption in some corner cases
|
|
In 56c6910028a (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust
`discard_index()` to release the "last-update" token: it is no longer a
64-bit number, but a free-form string that has been allocated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Raise the buffer size used when writing the index file out from
(obviously too small) 8kB to (clearly sufficiently large) 128kB.
* ns/raise-write-index-buffer-size:
read-cache: make the index write buffer size 128K
|
|
Preliminary changes to fsmonitor integration.
* jh/fsmonitor-prework:
fsmonitor: refactor initialization of fsmonitor_last_update token
fsmonitor: allow all entries for a folder to be invalidated
fsmonitor: log FSMN token when reading and writing the index
fsmonitor: log invocation of FSMonitor hook to trace2
read-cache: log the number of scanned files to trace2
read-cache: log the number of lstat calls to trace2
preload-index: log the number of lstat calls to trace2
p7519: add trace logging during perf test
p7519: move watchman cleanup earlier in the test
p7519: fix watchman watch-list test on Windows
p7519: do not rely on "xargs -d" in test
|
|
Writing an index 8K at a time invokes the OS filesystem and caching code
very frequently, introducing noticeable overhead while writing large
indexes. When experimenting with different write buffer sizes on Windows
writing the Windows OS repo index (260MB), most of the benefit came by
bumping the index write buffer size to 64K. I picked 128K to ensure that
we're past the knee of the curve.
With this change, the time under do_write_index for an index with 3M
files goes from ~1.02s to ~0.72s.
Signed-off-by: Neeraj Singh <neerajsi@ntdev.microsoft.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Victoria Dye
René Scharfe
Ævar Arnfjörð Bjarmason
SZEDER Gábor
Derrick Stolee
Andrzej Hunt
Jonathan Tan
Eric Wong
Matheus Tavares
Adam Dinwoodie
brian m. carlson
Johannes Schindelin
Neeraj Singh