summaryrefslogtreecommitdiff
path: root/read-cache.c
AgeCommit message (Collapse)AuthorFilesLines
2006-08-16Merge branch 'jc/racy'Libravatar Junio C Hamano1-59/+10
* jc/racy: Remove the "delay writing to avoid runtime penalty of racy-git avoidance" Add check program "git-check-racy" Documentation/technical/racy-git.txt avoid nanosleep(2)
2006-08-15Remove the "delay writing to avoid runtime penalty of racy-git avoidance"Libravatar Junio C Hamano1-52/+1
The work-around should not be needed. Even if it turns out we would want it later, git will remember the patch for us ;-). Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-15Add check program "git-check-racy"Libravatar Junio C Hamano1-3/+9
This will help counting the racily clean paths, but it should be useless for daily use. Do not even enable it in the makefile. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-15remove unnecessary initializationsLibravatar David Rientjes1-6/+6
[jc: I needed to hand merge the changes to the updated codebase, so the result needs to be checked.] Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-15avoid nanosleep(2)Libravatar Junio C Hamano1-5/+1
On Solaris nanosleep(2) is not available in libc; you need to link with -lrt to get it. The purpose of the loop is to wait until the next filesystem timestamp granularity, and the code uses subsecond sleep in the hope that it can shorten the delay to 0.5 seconds on average instead of a full second. It is probably not worth depending on an extra library for this. We might want to yank out the whole "racy-git avoidance is costly later at runtime, so let's delay writing the index out" codepath later, but that is a separate issue and needs some testing on large trees to figure it out. After playing with the kernel tree, I have a feeling that the whole thing may not be worth it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-14read-cache.c cleanupLibravatar David Rientjes1-7/+3
Removes conditional returns. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-08read-cache: tweak racy-git delay logicLibravatar Junio C Hamano1-21/+52
Instead of looping over the entries and writing out, use a separate loop after all entries have been written out to check how many entries are racily clean. Make sure that the newly created index file gets the right timestamp when we check by flushing the buffered data by ce_write(). Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-07Racy git: avoid having to be always too carefulLibravatar Junio C Hamano1-4/+40
Immediately after a bulk checkout, most of the paths in the working tree would have the same timestamp as the index file, and this would force ce_match_stat() to take slow path for all of them. When writing an index file out, if many of the paths have very new (read: the same timestamp as the index file being written out) timestamp, we are better off delaying the return from the command, to make sure that later command to touch the working tree files will leave newer timestamps than recorded in the index, thereby avoiding to take the slow path. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-31Fix double "close()" in ce_compare_dataLibravatar Linus Torvalds1-1/+1
Doing an "strace" on "git diff" shows that we close() a file descriptor twice (getting EBADFD on the second one) when we end up in ce_compare_data if the index does not match the checked-out stat information. The "index_fd()" function will already have closed the fd for us, so we should not close it again. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-26Make git-mv a builtinLibravatar Johannes Schindelin1-0/+39
This also moves add_file_to_index() to read-cache.c. Oh, and while touching builtin-add.c, it also removes a duplicate git_config() call. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-26Extract helper bits from c-merge-recursive workLibravatar Johannes Schindelin1-45/+42
This backports the pieces that are not uncooked from the merge-recursive WIP we have seen earlier, to be used in git-mv rewritten in C. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-10Avoid C99 comments, use old-style C comments instead.Libravatar Pavel Roskin1-1/+1
This doesn't make the code uglier or harder to read, yet it makes the code more portable. This also simplifies checking for other potential incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible constructs as warnings, but C99 comments will cause it to emit an error. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-20Remove all void-pointer arithmetic.Libravatar Florian Forster1-6/+7
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in various ways. Usually the strategy that required the least changes was used. Signed-off-by: Florian Forster <octo@verplant.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-28Merge branch 'jc/dirwalk-n-cache-tree' into jc/cache-treeLibravatar Junio C Hamano1-1/+184
* jc/dirwalk-n-cache-tree: (212 commits) builtin-rm: squelch compiler warnings. Add builtin "git rm" command Move pathspec matching from builtin-add.c into dir.c Prevent bogus paths from being added to the index. builtin-add: fix unmatched pathspec warnings. Remove old "git-add.sh" remnants builtin-add: warn on unmatched pathspecs Do "git add" as a builtin Clean up git-ls-file directory walking library interface libify git-ls-files directory traversal Add a conversion tool to migrate remote information into the config fetch, pull: ask config for remote information Fix build procedure for builtin-init-db read-tree -m -u: do not overwrite or remove untracked working tree files. apply --cached: do not check newly added file in the working tree Implement a --dry-run option to git-quiltimport Implement git-quiltimport Revert "builtin-grep: workaround for non GNU grep." builtin-grep: workaround for non GNU grep. builtin-grep: workaround for non GNU grep. ...
2006-05-28git-write-tree writes garbage on sparc64Libravatar Dennis Stosberg1-1/+1
In the "next" branch, write_index_ext_header() writes garbage on a 64-bit big-endian machine; the written index file will be unreadable. I noticed this on NetBSD/sparc64. Reproducible with: $ git init-db $ :>file $ git-update-index --add file $ git-write-tree $ git-update-index error: index uses extension, which we do not understand fatal: index file corrupt Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-20Merge branch 'lt/dirwalk' into jc/dirwalk-n-cache-treeLibravatar Junio C Hamano1-0/+66
This commit is what this branch is all about. It records the evil merge needed to adjust built-in git-add and git-rm for the cache-tree extension. * lt/dirwalk: Add builtin "git rm" command Move pathspec matching from builtin-add.c into dir.c Prevent bogus paths from being added to the index. builtin-add: fix unmatched pathspec warnings. Remove old "git-add.sh" remnants builtin-add: warn on unmatched pathspecs Do "git add" as a builtin Clean up git-ls-file directory walking library interface libify git-ls-files directory traversal Conflicts: Makefile builtin.h git.c update-index.c
2006-05-20Merge branch 'jc/cache-tree' into jc/dirwalk-n-cache-treeLibravatar Junio C Hamano1-0/+72
* jc/cache-tree: (24 commits) Fix crash when reading the empty tree fsck-objects: do not segfault on missing tree in cache-tree cache-tree: a bit more debugging support. read-tree: invalidate cache-tree entry when a new index entry is added. Fix test-dump-cache-tree in one-tree disappeared case. fsck-objects: mark objects reachable from cache-tree cache-tree: replace a sscanf() by two strtol() calls cache-tree.c: typefix test-dump-cache-tree: validate the cached data as well. cache_tree_update: give an option to update cache-tree only. read-tree: teach 1-way merege and plain read to prime cache-tree. read-tree: teach 1 and 2 way merges about cache-tree. update-index: when --unresolve, smudge the relevant cache-tree entries. test-dump-cache-tree: report number of subtrees. cache-tree: sort the subtree entries. Teach fsck-objects about cache-tree. index: make the index file format extensible. cache-tree: protect against "git prune". Add test-dump-cache-tree Use cache-tree in update-index. ...
2006-05-19Libify the index refresh logicLibravatar Linus Torvalds1-0/+117
This cleans up and libifies the "git update-index --[really-]refresh" functionality. This will be eventually required for eventually doing the "commit" and "status" commands as built-ins. It really just moves "refresh_index()" from update-index.c to read-cache.c, but it also has to change the calling convention so that the function uses a "unsigned int flags" argument instead of various static flags variables for passing down the information about whether to be quiet or not, and allow unmerged entries etc. That actually cleans up update-index.c too, since it turns out that all those flags were really specific to that one function of the index update, so they shouldn't have had file-scope visibility even before. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-18Prevent bogus paths from being added to the index.Libravatar Linus Torvalds1-0/+66
With this one, it's now a fatal error to try to add a pathname that cannot be added with "git add", i.e. [torvalds@g5 git]$ git add .git/config fatal: unable to add .git/config to index and [torvalds@g5 git]$ git add foo/../bar fatal: unable to add foo/../bar to index instead of the old "Ignoring path xyz" warning that would end up silently succeeding on any other paths. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-09read-cache.c: use xcalloc() not calloc()Libravatar Yakov Lerner1-1/+1
Elsewhere we use xcalloc(); we should consistently do so. Signed-off-by: Yakov Lerner <iler.ml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-24index: make the index file format extensible.Libravatar Junio C Hamano1-26/+79
... and move the cache-tree data into it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-23read-cache/write-cache: optionally return cache checksum SHA1.Libravatar Junio C Hamano1-8/+27
read_cache_1() and write_cache_1() takes an extra parameter *sha1 that returns the checksum of the index file when non-NULL. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-12cache_name_compare() compares name and stage, nothing else.Libravatar Junio C Hamano1-3/+3
The code was a bit unclear in expressing what it wants to compare. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-08"Assume unchanged" gitLibravatar Junio C Hamano1-5/+23
This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-20ce_smudge_racily_clean_entry: explain why it works.Libravatar Junio C Hamano1-1/+25
This is a tricky code and warrants extra commenting. I wasted 30 minutes trying to break it until I realized why it works. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-20Racy GIT (part #2)Libravatar Junio C Hamano1-1/+31
The previous round caught the most trivial case well, but broke down once index file is updated again. Smudge problematic entries (they should be very few if any under normal interactive workflow) before writing a new index file out. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-20Racy GITLibravatar Junio C Hamano1-54/+86
This fixes the longstanding "Racy GIT" problem, which was pretty much there from the beginning of time, but was first demonstrated by Pasky in this message on October 24, 2005: http://marc.theaimsgroup.com/?l=git&m=113014629716878 If you run the following sequence of commands: echo frotz >infocom git update-index --add infocom echo xyzzy >infocom so that the second update to file "infocom" does not change st_mtime, what is recorded as the stat information for the cache entry "infocom" exactly matches what is on the filesystem (owner, group, inum, mtime, ctime, mode, length). After this sequence, we incorrectly think "infocom" file still has string "frotz" in it, and get really confused. E.g. git-diff-files would say there is no change, git-update-index --refresh would not even look at the filesystem to correct the situation. Some ways of working around this issue were already suggested by Linus in the same thread on the same day, including waiting until the next second before returning from update-index if a cache entry written out has the current timestamp, but that means we can make at most one commit per second, and given that the e-mail patch workflow used by Linus needs to process at least 5 commits per second, it is not an acceptable solution. Linus notes that git-apply is primarily used to update the index while processing e-mailed patches, which is true, and git-apply's up-to-date check is fooled by the same problem but luckily in the other direction, so it is not really a big issue, but still it is disturbing. The function ce_match_stat() is called to bypass the comparison against filesystem data when the stat data recorded in the cache entry matches what stat() returns from the filesystem. This patch tackles the problem by changing it to actually go to the filesystem data for cache entries that have the same mtime as the index file itself. This works as long as the index file and working tree files are on the filesystems that share the same monotonic clock. Files on network mounted filesystems sometimes get skewed timestamps compared to "date" output, but as long as working tree files' timestamps are skewed the same way as the index file's, this approach still works. The only problematic files are the ones that have the same timestamp as the index file's, because two file updates that sandwitch the index file update must happen within the same second to trigger the problem. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-11Use git config file for committer name and email infoLibravatar Linus Torvalds1-1/+0
This starts using the "user.name" and "user.email" config variables if they exist as the default name and email when committing. This means that you don't have to use the GIT_COMMITTER_EMAIL environment variable to override your email - you can just edit the config file instead. The patch looks bigger than it is because it makes the default name and email information non-static and renames it appropriately. And it moves the common git environment variables into a new library file, so that you can link against libgit.a and get the git environment without having to link in zlib and libcrypt. In short, most of it is renaming and moving, the real change core is just a few new lines in "git_default_config()" that copies the user config values to the new base. It also changes "git-var -l" to list the config variables. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-11Use core.filemode.Libravatar Junio C Hamano1-4/+8
With "[core] filemode = false", you can tell git to ignore differences in the working tree file only in executable bit. * "git-update-index --refresh" does not say "needs update" if index entry and working tree file differs only in executable bit. * "git-update-index" on an existing path takes executable bit from the existing index entry, if the path and index entry are both regular files. * "git-diff-files" and "git-diff-index" without --cached flag pretend the path on the filesystem has the same executable bit as the existing index entry, if the path and index entry are both regular files. If you are on a filesystem with unreliable mode bits, you may need to force the executable bit after registering the path in the index. * "git-update-index --chmod=+x foo" flips the executable bit of the index file entry for path "foo" on. Use "--chmod=-x" to flip it off. Note that --chmod only works in index file and does not look at nor update the working tree. So if you are on a filesystem and do not have working executable bit, you would do: 1. set the appropriate .git/config option; 2. "git-update-index --add new-file.c" 3. "git-ls-files --stage new-file.c" to see if it has the desired mode bits. If not, e.g. to drop executable bit picked up from the filesystem, say "git-update-index --chmod=-x new-file.c". Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Add ".git/config" file parserLibravatar Linus Torvalds1-0/+1
This is a first cut at a very simple parser for a git config file. The format of the file is a simple ini-file like thing, with simple variable/value pairs. You can (and should) make the variables have a simple single-level scope, ie a valid file looks something like this: # # This is the config file, and # a '#' or ';' character indicates # a comment # ; core variables [core] ; Don't trust file modes filemode = false ; Our diff algorithm [diff] external = "/usr/local/bin/gnu-diff -u" renames = true which parses into three variables: "core.filemode" is associated with the string "false", and "diff.external" gets the appropriate quoted value. Right now we only react to one variable: "core.filemode" is a boolean that decides if we should care about the 0100 (user-execute) bit of the stat information. Even that is just a parsing demonstration - this doesn't actually implement that st_mode compare logic itself. Different programs can react to different config options, although they should always fall back to calling "git_default_config()" on any config option name that they don't recognize. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-01[PATCH] Better error reporting for "git status"Libravatar Linus Torvalds1-5/+9
Instead of "git status" ignoring (and hiding) potential errors from the "git-update-index" call, make it exit if it fails, and show the error. In order to do this, use the "-q" flag (to ignore not-up-to-date files) and add a new "--unmerged" flag that allows unmerged entries in the index without any errors. This also avoids marking the index "changed" if an entry isn't actually modified, and makes sure that we exit with an understandable error message if the index is corrupt or unreadable. "read_cache()" no longer returns an error for the caller to check. Finally, make die() and usage() exit with recognizable error codes, if we ever want to check the failure reason in scripts. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-24Diff clean-up.Libravatar Junio C Hamano1-1/+1
This is a long overdue clean-up to the code for parsing and passing diff options. It also tightens some constness issues. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20Show modified files in git-ls-filesLibravatar Junio C Hamano1-0/+77
Add -m/--modified to show files that have been modified wrt. the index. [jc: The original came from Brian Gerst on Sep 1st but it only checked if the paths were cache dirty without actually checking the files were modified. I also added the usage string and a new test.] Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-11[PATCH] Fix buffer overflow in ce_flush().Libravatar Qingning Huo1-0/+7
Add a check before appending SHA1 signature to write_buffer, flush it first if necessary. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-16[PATCH] Improve handling of "." and ".." in git-diff-*Libravatar Linus Torvalds1-0/+2
This fixes up usage of ".." (without an ending slash) and "." (with or without the ending slash) in the git diff family. It also fixes pathspec matching for the case of an empty pathspec, since a "." in the top-level directory (or enough ".." under subdirectories) will result in an empty pathspec. We used to not match it against anything, but it should in fact match everything. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-29[PATCH] mmap error handlingLibravatar Pavel Roskin1-2/+2
I have reviewed all occurrences of mmap() in git and fixed three types of errors/defects: 1) The result is not checked. 2) The file descriptor is closed if mmap() succeeds, but not when it fails. 3) Various casts applied to -1 are used instead of MAP_FAILED, which is specifically defined to check mmap() return value. [jc: This is a second round of Pavel's patch. He fixed up the problem that close() potentially clobbering the errno from mmap, which the first round had.] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-14Make "ce_match_path()" a generic helper functionLibravatar Linus Torvalds1-0/+24
... and make git-diff-files use it too. This all _should_ make the diffcore-pathspec.c phase unnecessary, since the diff'ers now all do the path matching early interally.
2005-06-25[PATCH] Fix oversimplified optimization for add_cache_entry().Libravatar Junio C Hamano1-11/+21
An earlier change to optimize directory-file conflict check broke what "read-tree --emu23" expects. This is fixed by this commit. (1) Introduces an explicit flag to tell add_cache_entry() not to check for conflicts and use it when reading an existing tree into an empty stage --- by definition this case can never introduce such conflicts. (2) Makes read-cache.c:has_file_name() and read-cache.c:has_dir_name() aware of the cache stages, and flag conflict only with paths in the same stage. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-18read-cache.c: remove stray debugging printfLibravatar Linus Torvalds1-1/+0
Pointed out by Junio, part of my debugging of the rewrite of the file/dir conflict handling.
2005-06-18Re-implement "check_file_directory_conflict()"Libravatar Linus Torvalds1-89/+88
This is (imho) more readable, and is also a lot faster. The expense of looking up sub-directory beginnings was killing us on things like "git-diff-cache", even though that one didn't even care at all about the file vs directory conflicts. We really only care when somebody tries to add a conflicting name to stage 0. We should go through the conflict rules more carefully some day.
2005-06-10[PATCH] Bugfix: read-cache.c:write_cache() misrecords number of entries.Libravatar Junio C Hamano1-2/+6
When we choose to omit deleted entries, we should subtract numbers of such entries from the total number in the header. Signed-off-by: Junio C Hamano <junkio@cox.net> Oops. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-09git-read-tree: remove deleted files in the working directoryLibravatar Linus Torvalds1-0/+2
Only when "-u" is used of course.
2005-06-07[PATCH] Use ntohs instead of htons to convert ce_flags to host byte orderLibravatar Timo Hirvonen1-5/+5
Use ntohs instead of htons to convert ce_flags to host byte order Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-27[PATCH] check_file_directory_conflict path fixLibravatar David Meybohm1-1/+3
check_file_directory_conflict can give the wrong answers. This is because the wrong length is passed to cache_name_pos. The length passed should be the length of the whole path from the root, not the length of each path subcomponent. $ git-init-db defaulting to local storage area $ mkdir path && touch path/file $ git-update-cache --add path/file $ rm path/file $ mkdir path/file && touch path/file/f $ git-update-cache --add path/file/f <-- Conflict ignored $ Signed-off-by: David Meybohm <dmeybohmlkml@bellsouth.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-22Don't care about st_dev in the index fileLibravatar Linus Torvalds1-4/+14
Thomas Glanzmann points out that it doesn't work well with different clients accessing the repository over NFS - they have different views on what the "device" for the filesystem is. Of course, other filesystems may not even have stable inode numbers. But we don't care. At least for now.
2005-05-22Include file cleanups..Libravatar Linus Torvalds1-1/+0
Add <limits.h> to the include files handled by "cache.h", and remove extraneous #include directives from various .c files. The rule is that "cache.h" gets all the basic stuff, so that we'll have as few system dependencies as possible.
2005-05-20Introduce "base_name_compare()" helper functionLibravatar Linus Torvalds1-0/+19
This one compares two pathnames that may be partial basenames, not full paths. We need to get the path sorting right, since a directory name will sort as if it had the final '/' at the end.
2005-05-19[PATCH] Implement git-checkout-cache -u to update stat information in the cache.Libravatar Junio C Hamano1-0/+20
With -u flag, git-checkout-cache picks up the stat information from newly created file and updates the cache. This removes the need to run git-update-cache --refresh immediately after running git-checkout-cache. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-18[PATCH] Kill a bunch of pointer sign warnings for gcc4Libravatar Brian Gerst1-1/+1
- Raw hashes should be unsigned char. - String functions want signed char. - Hash and compress functions want unsigned char. Signed-off By: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-15Rename some more cache-related functionsLibravatar Brad Roberts1-7/+7
same_name -> ce_same_name() remove_entry_at() -> remove_cache_entry_at() Signed-off-by: Brad Roberts <braddr@puremagic.com> Signed-off-by: Petr Baudis <pasky@ucw.cz>