summaryrefslogtreecommitdiff
path: root/quote.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-10quote: turn 'nodq' parameter into a set of flagsLibravatar Junio C Hamano1-7/+11
quote_c_style() and its friend quote_two_c_style() both take an optional "please omit the double quotes around the quoted body" parameter. Turn it into a flag word, assign one bit out of it, and call it CQUOTE_NODQ bit. No behaviour change intended. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-10quote: rename misnamed sq_lookup[] to cq_lookup[]Libravatar Junio C Hamano1-7/+7
This table is used to see if each byte needs quoting when responding to a request to C-quote the string, not quoting with single-quote in the shell style. Similarly, sq_must_quote() is fed each byte from the string being C-quoted. No behaviour change intended. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-10quote_path: code clarificationLibravatar Junio C Hamano1-7/+12
The implementation we moved from wt-status to enclose a pathname that has a SP in it inside a dq-pair is a bit convoluted. It lets quote_c_style_counted() do its escaping and then (1) if the input string got escaped, which is checked by seeing if the result begins with a double-quote, declare that we are done. If there wasn't any SP in the input, that is OK, and if there was, the result is quoted already so it is OK, too. (2) if the input string did not get escaped, and the result has SP in it, enclose the whole thing in a dq-pair ourselves. Instead we can scan the path upfront to see if the input has SP in it. If so, we tell quote_c_style_counted() not to enclose its output in a dq-pair, and we add a dq-pair ourselves. Whether the input had bytes that quote_c_style_counted() uses backslash quoting, this would give us a desired quoted string. If the input does not have SP in it, we just let quote_c_style_counted() do its thing as usual, which would enclose the result in a dq-pair only when needed. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-10quote_path: optionally allow quoting a path with SP in itLibravatar Junio C Hamano1-0/+7
Some code in wt-status.c special case a path with SP in it, which usually does not have to be c-quoted, and ensure that such a path does get quoted. Move the logic to quote_path() and give it a bit in the flags word, QUOTE_PATH_QUOTE_SP. No behaviour change intended. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-10quote_path: give flags parameter to quote_path()Libravatar Junio C Hamano1-1/+1
The quote_path() function computes a path (relative to its base directory) and c-quotes the result if necessary. Teach it to take a flags parameter to allow its behaviour to be enriched later. No behaviour change intended. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-10quote_path: rename quote_path_relative() to quote_path()Libravatar Junio C Hamano1-2/+1
There is no quote_path_absolute() or anything that causes confusion, and one of the two large consumers already rename the long name locally with a preprocessor macro. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-28strvec: convert remaining callers away from argv_array nameLibravatar Jeff King1-2/+2
We eventually want to drop the argv_array name and just use strvec consistently. There's no particular reason we have to do it all at once, or care about interactions between converted and unconverted bits. Because of our preprocessor compat layer, the names are interchangeable to the compiler (so even a definition and declaration using different names is OK). This patch converts all of the remaining files, as the resulting diff is reasonably sized. The conversion was done purely mechanically with: git ls-files '*.c' '*.h' | xargs perl -i -pe ' s/ARGV_ARRAY/STRVEC/g; s/argv_array/strvec/g; ' We'll deal with any indentation/style fallouts separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-28quote: rename sq_dequote_to_argv_array to mention strvecLibravatar Jeff King1-1/+1
We want to eventually drop the use of the "argv_array" name in favor of "strvec." Unlike most other uses of the name, this one is embedded in a function name, so the definition and all of the callers need to be updated at the same time. We don't technically need to update the parameter types here (our preprocessor compat macros make the two names interchangeable), but let's do so to keep the site consistent for now. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-28strvec: rename files from argv-array to strvecLibravatar Jeff King1-1/+1
This requires updating #include lines across the code-base, but that's all fairly mechanical, and was done with: git ls-files '*.c' '*.h' | xargs perl -i -pe 's/argv-array.h/strvec.h/' Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-24quote: use isalnum() to check for alphanumeric charactersLibravatar René Scharfe1-1/+1
isalnum(c) is equivalent to isalpha(c) || isdigit(c), so use the former instead. The result is shorter, simpler and slightly more efficient. Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-15Merge branch 'gs/sq-quote-buf-pretty'Libravatar Junio C Hamano1-0/+6
Pretty-printed command line formatter (used in e.g. reporting the command being run by the tracing API) had a bug that lost an argument that is an empty string, which has been corrected. * gs/sq-quote-buf-pretty: sq_quote_buf_pretty: don't drop empty arguments
2019-10-08sq_quote_buf_pretty: don't drop empty argumentsLibravatar Garima Singh1-0/+6
Empty arguments passed on the command line can be represented by a '', however sq_quote_buf_pretty was incorrectly dropping these arguments altogether. Fix this problem by ensuring that such arguments are emitted as '' instead. Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-09quote: add sq_append_quote_argv_pretty()Libravatar Jeff Hostetler1-1/+17
sq_quote_argv_pretty() builds a "pretty" string from the given argv. It inserts whitespace before each value, rather than just between them, so the resulting string always has a leading space. Lets give callers an option to not have the leading space or have to ltrim() it later. Create sq_append_quote_argv_pretty() to convert an argv into a pretty, quoted if necessary, string with space delimiters and without a leading space. Convert the existing sq_quote_argv_pretty() to use this new routine while preserving the leading space behavior. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-12-09Indent code with TABsLibravatar Nguyễn Thái Ngọc Duy1-1/+1
We indent with TABs and sometimes for fine alignment, TABs followed by spaces, but never all spaces (unless the indentation is less than 8 columns). Indenting with spaces slips through in some places. Fix them. Imported code and compat/ are left alone on purpose. The former should remain as close as upstream as possible. The latter pretty much has separate maintainers, it's up to them to decide. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-27Merge branch 'jk/sq-dequote-on-bogus-input'Libravatar Junio C Hamano1-3/+9
Code to unquote single-quoted string (used in the parser for configuration files, etc.) did not diagnose bogus input correctly and produced bogus results instead. * jk/sq-dequote-on-bogus-input: sq_dequote: fix extra consumption of source string
2018-02-14sq_dequote: fix extra consumption of source stringLibravatar Jeff King1-3/+9
This fixes a (probably harmless) parsing problem in sq_dequote_step(), in which we parse some bogus input incorrectly rather than complaining that it's bogus. Our shell-dequoting function is very strict: it can unquote everything generated by sq_quote(), but not arbitrary strings. In particular, it only allows characters outside of the single-quoted string if they are immediately backslashed and then the single-quoted string is resumed. So: 'foo'\''bar' is OK. But these are not: 'foo'\'bar 'foo'\' 'foo'\'\''bar' even though they are all valid shell. The parser has a funny corner case here. When we see a backslashed character, we keep incrementing the "src" pointer as we parse it. For a single sq_dequote() call, that's OK; our next step is to bail with an error, and we don't care where "src" points. But if we're parsing multiple strings with sq_dequote_to_argv(), then our next step is to see if the string is followed by whitespace. Because we erroneously incremented the "src" pointer, we don't barf on the bogus backslash that we skipped. Instead, we may find whitespace that immediately follows it, and continue as if all is well (skipping the backslashed character completely!). In practice, this shouldn't be a big deal. The input is bogus, and our sq_quote() would never generate this bogus input. In all but one callers, we are parsing input created by an earlier call to sq_quote(). That final case is "git shell", which parses shell-quoting generated by the client. And in that case we use the singular sq_quote(), which has always behaved correctly. One might also wonder if you could provoke a read past the end of the string. But the answer is no; we still parse character by character, and would never advance past a NUL. This patch implements the minimal fix, along with documenting the restriction (which confused at least me while reading the code). We should possibly consider being more liberal in accepting valid shell-quoted words. I suspect the code may actually be simpler, and it would be more friendly to anybody generating or editing input by hand. But I wanted to fix just the immediate bug in this patch. We don't have a direct way to unit-test the sq_dequote() functions, but we can do this by feeding input to GIT_CONFIG_PARAMETERS (which is not normally a user-facing interface, but serves here as it expects to see sq_quote() input from "git -c"). I've included both a bogus example, and a related "good" one to confirm that we still parse it correctly. Noticed-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-16trace: avoid unnecessary quotingLibravatar Jeff King1-0/+26
Trace output which contains arbitrary strings (e.g., the arguments to commands which we are running) is always passed through sq_quote_buf(). That function always adds single-quotes, even if the output consists of vanilla characters. This can make the output a bit hard to read. Let's avoid the quoting if there are no characters which a shell would interpret. Trace output doesn't necessarily need to be shell-compatible, but: - the shell language is a good ballpark for what humans consider readable (well, humans versed in command line tools) - the run_command bits can be cut-and-pasted to a shell, and we'll keep that property - it covers any cases which would make the output visually ambiguous (e.g., embedded whitespace or quotes) Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-16sq_quote_argv: drop maxlen parameterLibravatar Jeff King1-3/+1
No caller passes anything but "0" for this parameter, which requests that the function ignore it completely. In fact, in all of history there was only one such caller, and it went away in 7f51f8bc2b (alias: use run_command api to execute aliases, 2011-01-07). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-22consistently use "fallthrough" comments in switchesLibravatar Jeff King1-0/+1
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a switch case falls through to the next case. The general idea is that the compiler can't tell if this was intentional or not, so you should annotate any intentional fall-throughs as such, leaving it to complain about any unannotated ones. There's a GNU __attribute__ which can be used for annotation, but of course we'd have to #ifdef it away on non-gcc compilers. Gcc will also recognize specially-formatted comments, which matches our current practice. Let's extend that practice to all of the unannotated sites (which I did look over and verify that they were behaving as intended). Ideally in each case we'd actually give some reasons in the comment about why we're falling through, or what we're falling through to. And gcc does support that with -Wimplicit-fallthrough=2, which relaxes the comment pattern matching to anything that contains "fallthrough" (or a variety of spelling variants). However, this isn't the default for -Wimplicit-fallthrough, nor for -Wextra. In the name of simplicity, it's probably better for us to support the default level, which requires "fallthrough" to be the only thing in the comment (modulo some window dressing like "else" and some punctuation; see the gcc manual for the complete set of patterns). This patch suppresses all warnings due to -Wimplicit-fallthrough. We might eventually want to add that to the DEVELOPER Makefile knob, but we should probably wait until gcc 7 is more widely adopted (since earlier versions will complain about the unknown warning type). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-19Merge branch 'nd/icase'Libravatar Junio C Hamano1-0/+37
"git grep -i" has been taught to fold case in non-ascii locales correctly. * nd/icase: grep.c: reuse "icase" variable diffcore-pickaxe: support case insensitive match on non-ascii diffcore-pickaxe: Add regcomp_or_die() grep/pcre: support utf-8 gettext: add is_utf8_locale() grep/pcre: prepare locale-dependent tables for icase matching grep: rewrite an if/else condition to avoid duplicate expression grep/icase: avoid kwsset when -F is specified grep/icase: avoid kwsset on literal non-ascii strings test-regex: expose full regcomp() to the command line test-regex: isolate the bug test code grep: break down an "if" stmt in preparation for next changes
2016-07-01grep/icase: avoid kwsset when -F is specifiedLibravatar Nguyễn Thái Ngọc Duy1-0/+37
Similar to the previous commit, we can't use kws on icase search outside ascii range. But we can't simply pass the pattern to regcomp/pcre like the previous commit because it may contain regex special characters, so we need to quote the regex first. To avoid misquote traps that could lead to undefined behavior, we always stick to basic regex engine in this case. We don't need fancy features for grepping a literal string anyway. basic_regex_quote_buf() assumes that if the pattern is in a multibyte encoding, ascii chars must be unambiguously encoded as single bytes. This is true at least for UTF-8. For others, let's wait until people yell up. Chances are nobody uses multibyte, non utf-8 charsets anymore. Noticed-by: Plamen Totev <plamen.totev@abv.bg> Helped-by: René Scharfe <l.s.r@web.de> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-01quote: implement sq_quotef()Libravatar Jacob Keller1-0/+13
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-07quote: move comment before sq_quote_buf()Libravatar Christian Couder1-5/+5
A big comment at the beginning of quote.c is really related to sq_quote_buf(), so let's move it in front of this function. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-07quote: fix broken sq_quote_buf() related commentLibravatar Christian Couder1-0/+1
Since 77d604c (Enhanced sq_quote(), 10 Oct 2005), the comment at the beginning of quote.c is broken. Let's fix it. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-01ls-tree: remove path filtering logic in show_treeLibravatar Nguyễn Thái Ngọc Duy1-21/+0
ls-tree uses read_tree_recursive() which already does path filtering using pathspec. No need to filter one more time based on prefix only. "ls-tree ../somewhere" does not work because of this. write_name_quotedpfx() can now be retired because nobody else uses it. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-30quote: remove sq_quote_print()Libravatar Ramkumar Ramachandra1-17/+0
Remove sq_quote_print() since it has no callers. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-30for-each-ref, quote: convert *_quote_print -> *_quote_bufLibravatar Nguyễn Thái Ngọc Duy1-22/+22
The print_value() function in for-each-ref.c prints values to stdout immediately using {sq|perl|python|tcl}_quote_print(). Change these lower-level quote functions to instead leave their results in strbuf so that we can later add post-processing to the results of them. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-26write_name{_quoted_relative,}(): remove redundant parametersLibravatar Jiang Xin1-2/+1
After substitute path_relative() in quote.c with relative_path() from path.c, parameters (such as len and prefix_len) are redundant in function write_name() and write_name_quoted_relative(). The callers have already been audited that the strings they pass are properly NUL terminated and the length they give are the length of the string (or -1 that asks the length to be counted by the callee). Remove these now-redundant parameters. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-26quote_path_relative(): remove redundant parameterLibravatar Jiang Xin1-5/+2
quote_path_relative() used to take a counted string as its parameter (the string to be quoted). With an earlier change, it now uses relative_path() that does not take a counted string, and we have been passing only the pointer to the string since then. Remove the length parameter from quote_path_relative() to show that this parameter was redundant. All the changed lines show that the caller passed either -1 (to ask the function run strlen() on the string), or the length of the string, so the earlier conversion was safe. All the callers of quote_path_relative() that used to take counted string have been audited to make sure that they are passing length of the actual string (or -1 to ask the callee run strlen()) Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-26quote.c: substitute path_relative with relative_pathLibravatar Jiang Xin1-53/+2
Substitute the function path_relative in quote.c with the function relative_path. Function relative_path can be treated as an enhanced and more robust version of path_relative. Outputs of path_relative and it's replacement (relative_path) are the same for the following cases: path prefix output of path_relative output of relative_path ======== ========= ======================= ======================= /a/b/c/ /a/b/ c/ c/ /a/b/c /a/b/ c c /a/ /a/b/ ../ ../ / /a/b/ ../../ ../../ /a/c /a/b/ ../c ../c /x/y /a/b/ ../../x/y ../../x/y a/b/c/ a/b/ c/ c/ a/ a/b/ ../ ../ x/y a/b/ ../../x/y ../../x/y /a/b (empty) /a/b /a/b /a/b (null) /a/b /a/b a/b (empty) a/b a/b a/b (null) a/b a/b But if both of the path and the prefix are the same, or the returned relative path should be the current directory, the outputs of both functions are different. Function relative_path returns "./", while function path_relative returns empty string. path prefix output of path_relative output of relative_path ======== ========= ======================= ======================= /a/b/ /a/b/ (empty) ./ a/b/ a/b/ (empty) ./ (empty) (null) (empty) ./ (empty) (empty) (empty) ./ But the callers of path_relative can handle such cases, or never encounter this issue at all, because: * In function quote_path_relative, if the output of path_relative is empty, append "./" to it, like: if (!out->len) strbuf_addstr(out, "./"); * Another caller is write_name_quoted_relative, which is only used by builtin/ls-files.c. git-ls-files only show files, so path of files will never be identical with the prefix of a directory. The following differences show that path_relative does not handle extra slashes properly: path prefix output of path_relative output of relative_path ======== ========= ======================= ======================= /a//b//c/ //a/b// ../../../../a//b//c/ c/ a/b//c a//b ../b//c c And if prefix has no trailing slash, path_relative does not work properly either. But since prefix always has a trailing slash, it's not a problem. path prefix output of path_relative output of relative_path ======== ========= ======================= ======================= /a/b/c/ /a/b b/c/ c/ /a/b /a/b b ./ /a/b/ /a/b b/ ./ /a /a/b/ ../../a ../ a/b/c/ a/b b/c/ c/ a/b/ a/b b/ ./ a a/b ../a ../ x/y a/b/ ../x/y ../../x/y a/c a/b c ../c /a/ /a/b (empty) ../ (empty) /a/b ../../ ./ One tricky part in this conversion is write_name() function in ls-files.c. It takes a counted string, <name, len>, that is to be made relative to <prefix, prefix_len> and then quoted. Because write_name_quoted_relative() still takes these two parameters as counted string, but ignores the count and treat these two as NUL-terminated strings, this conversion needs to be audited for its callers: - For <name, len>, all three callers of write_name() passes a NUL-terminated string and its true length, so this patch makes "len" unused. - For <prefix, prefix_len>, prefix could be a string that is longer than empty while prefix_len could be 0 when "--full-name" option is used. This is fixed by checking prefix_len in write_name() and calling write_name_quoted_relative() with NULL when prefix_len is set to 0. Again, this makes "prefix_len" given to write_name_quoted_relative() unused, without introducing a bug. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Merge branch 'jk/argv-array'Libravatar Junio C Hamano1-3/+20
* jk/argv-array: run_hook: use argv_array API checkout: use argv_array API bisect: use argv_array API quote: provide sq_dequote_to_argv_array refactor argv_array into generic code quote.h: fix bogus comment add sha1_array API docs
2011-09-14quote: provide sq_dequote_to_argv_arrayLibravatar Jeff King1-3/+20
This is similar to sq_dequote_to_argv, but more convenient if you have an argv_array. It's tempting to just feed the components of the argv_array to sq_dequote_to_argv instead, but: 1. It wouldn't maintain the NULL-termination invariant of argv_array. 2. It doesn't match the memory ownership policy of argv_array (in which each component is free-able, not a pointer into a separate buffer). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-11ls-files: fix pathspec display on errorLibravatar Clemens Buchacher1-2/+6
The following sequence of commands reveals an issue with error reporting of relative paths: $ mkdir sub $ cd sub $ git ls-files --error-unmatch ../bbbbb error: pathspec 'b' did not match any file(s) known to git. $ git commit --error-unmatch ../bbbbb error: pathspec 'b' did not match any file(s) known to git. This bug is visible only if the normalized path (i.e., the relative path from the repository root) is longer than the prefix. Otherwise, the code skips over the normalized path and reads from an unused memory location which still contains a leftover of the original command line argument. So instead, use the existing facilities to deal with relative paths correctly. Also fix inconsistency between "checkout" and "commit", e.g. $ cd Documentation $ git checkout nosuch.txt error: pathspec 'Documentation/nosuch.txt' did not match... $ git commit nosuch.txt error: pathspec 'nosuch.txt' did not match... by propagating the prefix down the codepath that reports the error. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-05quote.c: separate quoting and relative path generationLibravatar Clemens Buchacher1-28/+61
This is in preparation of relative path support for ls-files, which quotes a path only if the line terminator is not the NUL character. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-06Fix invalid read in quote_c_style_countedLibravatar Jeff King1-1/+3
This function did not work on strings that were not NUL-terminated. It reads through a length-bounded string, searching for characters in need of quoting. After we find one, we output the quoted character, then advance our pointer to find the next one. However, we never decremented the length, meaning we ended up looking at whatever random junk was stored after the string. This bug was not found by the existing tests because most code paths feed a NUL-terminated string. The notable exception is a directory name being fed by ls-tree. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-12quote.c: mark file-local function staticLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-20Fix various sparse warnings in the git source codeLibravatar Linus Torvalds1-2/+2
There are a few remaining ones, but this fixes the trivial ones. It boils down to two main issues that sparse complains about: - warning: Using plain integer as NULL pointer Sparse doesn't like you using '0' instead of 'NULL'. For various good reasons, not the least of which is just the visual confusion. A NULL pointer is not an integer, and that whole "0 works as NULL" is a historical accident and not very pretty. A few of these remain: zlib is a total mess, and Z_NULL is just a 0. I didn't touch those. - warning: symbol 'xyz' was not declared. Should it be static? Sparse wants to see declarations for any functions you export. A lack of a declaration tends to mean that you should either add one, or you should mark the function 'static' to show that it's in file scope. A few of these remain: I only did the ones that should obviously just be made static. That 'wt_status_submodule_summary' one is debatable. It has a few related flags (like 'wt_status_use_color') which _are_ declared, and are used by builtin-commit.c. So maybe we'd like to export it at some point, but it's not declared now, and not used outside of that file, so 'static' it is in this patch. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-30quote: add "sq_dequote_to_argv" to put unwrapped args in an argv arrayLibravatar Christian Couder1-0/+17
This new function unwraps the space separated shell quoted elements in its first argument and places them in the argv array passed as its second argument. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-30quote: implement "sq_dequote_many" to unwrap many args in one stringLibravatar Christian Couder1-2/+16
The sq_dequote() function does not allow parsing a string with more than one single-quoted parameter easily; use its code to implement a new API sq_dequote_step() to allow the caller iterate through such a string to parse them one-by-one. The original sq_dequote() becomes a thin wrapper around it. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-27shrink git-shell by avoiding redundant dependenciesLibravatar Dmitry Potapov1-0/+2
A lot of modules that have nothing to do with git-shell functionality were linked in, bloating git-shell more than 8 times. This patch cuts off redundant dependencies by: 1. providing stubs for three functions that make no sense for git-shell; 2. moving quote_path_fully from environment.c to quote.c to make the later self sufficient; 3. moving make_absolute_path into a new separate file. The following numbers have been received with the default optimization settings on master using GCC 4.1.2: Before: text data bss dec hex filename 143915 1348 93168 238431 3a35f git-shell After: text data bss dec hex filename 17670 788 8232 26690 6842 git-shell Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-08Merge branch 'dp/clean-fix'Libravatar Junio C Hamano1-0/+42
* dp/clean-fix: git-clean: add tests for relative path git-clean: correct printing relative path Make private quote_path() in wt-status.c available as quote_path_relative() Revert part of d089eba (setup: sanitize absolute and funny paths in get_pathspec()) Revert part of 1abf095 (git-add: adjust to the get_pathspec() changes) Revert part of 744dacd (builtin-mv: minimum fix to avoid losing files) get_pathspec(): die when an out-of-tree path is given
2008-03-07Make private quote_path() in wt-status.c available as quote_path_relative()Libravatar Dmitry Potapov1-0/+42
Move quote_path() from wt-status.c to quote.c and rename it as quote_path_relative(), because it is a better name for a public function. Also, instead of handcrafted quoting, quote_c_style_counted() is now used, to make its quoting more consistent with the rest of the system, also honoring core.quotepath specified in configuration. Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-07unquote_c_style: fix off-by-one.Libravatar Pierre Habouzit1-1/+1
The optional endp parameter to unquote_c_style() was supposed to point at a location past the closing double quote, but it was going one beyond it. git-fast-import used this function heavily and the bug caused it to misparse the input stream, especially when parsing a rename command: R "filename that needs quoting" rename-target-name Because the function erroneously ate the whitespace after the closing dq, this triggered "Missing space after source" error when it shouldn't. Thanks to Adeodato Simò for having caught this. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-26Fix rewrite_diff() name quoting.Libravatar Junio C Hamano1-0/+16
This moves the logic to quote two paths (prefix + path) in C-style introduced in the previous commit from the dump_quoted_path() in combine-diff.c to quote.c, and uses it to fix rewrite_diff() that never C-quoted the pathnames correctly. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-03Trace and quote with argv: get rid of unneeded count argument.Libravatar Christian Couder1-10/+3
Now that str_buf takes care of all the allocations, there is no more gain to pass an argument count. So this patch removes the "count" argument from: - "sq_quote_argv" - "trace_argv_printf" and all the callers. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-08Style: place opening brace of a function definition at column 1Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-04Fix an infinite loop in sq_quote_buf().Libravatar Johannes Sixt1-1/+1
sq_quote_buf() treats single-quotes and exclamation marks specially, but it incorrectly parsed the input for single-quotes and backslashes. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-29strbuf change: be sure ->buf is never ever NULL.Libravatar Pierre Habouzit1-1/+1
For that purpose, the ->buf is always initialized with a char * buf living in the strbuf module. It is made a char * so that we can sloppily accept things that perform: sb->buf[0] = '\0', and because you can't pass "" as an initializer for ->buf without making gcc unhappy for very good reasons. strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf anymore. as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying ->buf isn't an option anymore, if ->buf is going to escape from the scope, and eventually be free'd. API changes: * strbuf_setlen now always works, so just make strbuf_reset a convenience macro. * strbuf_detatch takes a size_t* optional argument (meaning it can be NULL) to copy the buffer's len, as it was needed for this refactor to make the code more readable, and working like the callers. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-21sq_quote_argv and add_to_string rework with strbuf's.Libravatar Pierre Habouzit1-70/+24
* sq_quote_buf is made public, and works on a strbuf. * sq_quote_argv also works on a strbuf. * make sq_quote_argv take a "maxlen" argument to check the buffer won't grow too big. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-20Full rework of quote_c_style and write_name_quoted.Libravatar Pierre Habouzit1-90/+119
* quote_c_style works on a strbuf instead of a wild buffer. * quote_c_style is now clever enough to not add double quotes if not needed. * write_name_quoted inherits those advantages, but also take a different set of arguments. Now instead of asking for quotes or not, you pass a "terminator". If it's \0 then we assume you don't want to escape, else C escaping is performed. In any case, the terminator is also appended to the stream. It also no longer takes the prefix/prefix_len arguments, as it's seldomly used, and makes some optimizations harder. * write_name_quotedpfx is created to work like write_name_quoted and take the prefix/prefix_len arguments. Thanks to those API changes, diff.c has somehow lost weight, thanks to the removal of functions that were wrappers around the old write_name_quoted trying to give it a semantics like the new one, but performing a lot of allocations for this goal. Now we always write directly to the stream, no intermediate allocation is performed. As a side effect of the refactor in builtin-apply.c, the length of the bar graphs in diffstats are not affected anymore by the fact that the path was clipped. Signed-off-by: Pierre Habouzit <madcoder@debian.org>