summaryrefslogtreecommitdiff
path: root/pretty.c
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14strbuf: convert strbuf_add_unique_abbrev to use struct object_idLibravatar brian m. carlson1-4/+4
Convert the declaration and definition of strbuf_add_unique_abbrev to make it take a pointer to struct object_id. Predeclare the struct in strbuf.h, as cache.h includes strbuf.h before it declares the struct, and otherwise the struct declaration would have the wrong scope. Apply the following semantic patch, along with the standard object_id transforms, to adjust the callers: @@ expression E1, E2, E3; @@ - strbuf_add_unique_abbrev(E1, E2.hash, E3); + strbuf_add_unique_abbrev(E1, &E2, E3); @@ expression E1, E2, E3; @@ - strbuf_add_unique_abbrev(E1, E2->hash, E3); + strbuf_add_unique_abbrev(E1, E2, E3); Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-22log: add option to choose which refs to decorateLibravatar Rafael Ascensão1-2/+2
When `log --decorate` is used, git will decorate commits with all available refs. While in most cases this may give the desired effect, under some conditions it can lead to excessively verbose output. Introduce two command line options, `--decorate-refs=<pattern>` and `--decorate-refs-exclude=<pattern>` to allow the user to select which refs are used in decoration. When "--decorate-refs=<pattern>" is given, only the refs that match the pattern are used in decoration. The refs that match the pattern when "--decorate-refs-exclude=<pattern>" is given, are never used in decoration. These options follow the same convention for mixing negative and positive patterns across the system, assuming that the inclusive default is to match all refs available. (1) if there is no positive pattern given, pretend as if an inclusive default positive pattern was given; (2) for each candidate, reject it if it matches no positive pattern, or if it matches any one of the negative patterns. The rules for what is considered a match are slightly different from the rules used elsewhere. Commands like `log --glob` assume a trailing '/*' when glob chars are not present in the pattern. This makes it difficult to specify a single ref. On the other hand, commands like `describe --match --all` allow specifying exact refs, but do not have the convenience of allowing "shorthand refs" like 'refs/heads' or 'heads' to refer to 'refs/heads/*'. The commands introduced in this patch consider a match if: (a) the pattern contains globs chars, and regular pattern matching returns a match. (b) the pattern does not contain glob chars, and ref '<pattern>' exists, or if ref exists under '<pattern>/' This allows both behaviours (allowing single refs and shorthand refs) yet remaining compatible with existent commands. Helped-by: Kevin Daudt <me@ikke.info> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-02pretty.c: delimit "%(trailers)" arguments with ","Libravatar Taylor Blau1-5/+28
In preparation for adding consistent "%(trailers)" atom options to `git-for-each-ref(1)`'s "--format" argument, change "%(trailers)" in pretty.c to separate sub-arguments with a ",", instead of a ":". Multiple sub-arguments are given either as "%(trailers:unfold,only)" or "%(trailers:only,unfold)". This change disambiguates between "top-level" arguments, and arguments given to the trailers atom itself. It is consistent with the behavior of "%(upstream)" and "%(push)" atoms. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-26Merge branch 'jk/trailers-parse'Libravatar Junio C Hamano1-13/+13
"git interpret-trailers" has been taught a "--parse" and a few other options to make it easier for scripts to grab existing trailer lines from a commit log message. * jk/trailers-parse: doc/interpret-trailers: fix "the this" typo pretty: support normalization options for %(trailers) t4205: refactor %(trailers) tests pretty: move trailer formatting to trailer.c interpret-trailers: add --parse convenience option interpret-trailers: add an option to unfold values interpret-trailers: add an option to show only existing trailers interpret-trailers: add an option to show only the trailers trailer: put process_trailers() options into a struct
2017-08-15pretty: support normalization options for %(trailers)Libravatar Jeff King1-3/+12
The interpret-trailers command recently learned some options to make its output easier to parse (for a caller whose only interested in picking out the trailer values). But it's not very efficient for asking for the trailers of many commits in a single invocation. We already have "%(trailers)" to do that, but it doesn't know about unfolding or omitting non-trailers. Let's plumb those options through, so you can have the best of both. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-15pretty: move trailer formatting to trailer.cLibravatar Jeff King1-11/+2
The next commit will add many features to the %(trailer) placeholder in pretty.c. We'll need to access some internal functions of trailer.c for that, so our options are either: 1. expose those functions publicly or 2. make an entry point into trailer.c to do the formatting Doing (2) ends up exposing less surface area, though do note that caveats in the docstring of the new function. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-13pretty: respect color settings for %C placeholdersLibravatar Jeff King1-4/+23
The color placeholders have traditionally been unconditional, showing colors even when git is not otherwise configured to do so. This was not so bad for their original use, which was on the command-line (and the user could decide at that moment whether to add colors or not). But these days we have configured formats via pretty.*, and those should operate correctly in multiple contexts. In 3082517 (log --format: teach %C(auto,black) to respect color config, 2012-12-17), we gave an extended placeholder that could be used to accomplish this. But it's rather clunky to use, because you have to specify it individually for each color (and their matching resets) in the format. We shied away from just switching the default to auto, because it is technically breaking backwards compatibility. However, there's not really a use case for unconditional colors. The most plausible reason you would want them is to redirect "git log" output to a file. But there, the right answer is --color=always, as it does the right thing both with custom user-format colors and git-generated colors. So let's switch to the more useful default. In the off-chance that somebody really does find a use for unconditional colors without wanting to enable the rest of git's colors, we provide a new %C(always,...) to enable the old behavior. And we can remind them of --color=always in the documentation. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-10Merge branch 'rs/pretty-add-again' into maintLibravatar Junio C Hamano1-32/+0
The pretty-format specifiers like '%h', '%t', etc. had an optimization that no longer works correctly. In preparation/hope of getting it correctly implemented, first discard the optimization that is broken. * rs/pretty-add-again: pretty: recalculate duplicate short hashes
2017-06-24Merge branch 'bw/config-h'Libravatar Junio C Hamano1-0/+1
Fix configuration codepath to pay proper attention to commondir that is used in multi-worktree situation, and isolate config API into its own header file. * bw/config-h: config: don't implicitly use gitdir or commondir config: respect commondir setup: teach discover_git_directory to respect the commondir config: don't include config.h by default config: remove git_config_iter config: create config.h
2017-06-24Merge branch 'rs/pretty-add-again'Libravatar Junio C Hamano1-32/+0
The pretty-format specifiers like '%h', '%t', etc. had an optimization that no longer works correctly. In preparation/hope of getting it correctly implemented, first discard the optimization that is broken. * rs/pretty-add-again: pretty: recalculate duplicate short hashes
2017-06-15config: don't include config.h by defaultLibravatar Brandon Williams1-0/+1
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15pretty: recalculate duplicate short hashesLibravatar René Scharfe1-32/+0
b9c6232138 (--format=pretty: avoid calculating expensive expansions twice) optimized adding short hashes multiple times by using the fact that the output strbuf was only ever simply appended to and copying the added string from the previous run. That prerequisite is no longer given; we now have modfiers like %< and %+ that can cause the cache to lose track of the correct offsets. Remove it. Reported-by: Michael Giuffrida <michaelpg@chromium.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-29Merge branch 'bc/object-id'Libravatar Junio C Hamano1-1/+1
Conversion from uchar[20] to struct object_id continues. * bc/object-id: (53 commits) object: convert parse_object* to take struct object_id tree: convert parse_tree_indirect to struct object_id sequencer: convert do_recursive_merge to struct object_id diff-lib: convert do_diff_cache to struct object_id builtin/ls-tree: convert to struct object_id merge: convert checkout_fast_forward to struct object_id sequencer: convert fast_forward_to to struct object_id builtin/ls-files: convert overlay_tree_on_cache to object_id builtin/read-tree: convert to struct object_id sha1_name: convert internals of peel_onion to object_id upload-pack: convert remaining parse_object callers to object_id revision: convert remaining parse_object callers to object_id revision: rename add_pending_sha1 to add_pending_oid http-push: convert process_ls_object and descendants to object_id refs/files-backend: convert many internals to struct object_id refs: convert struct ref_update to use struct object_id ref-filter: convert some static functions to struct object_id Convert struct ref_array_item to struct object_id Convert the verify_pack callback to struct object_id Convert lookup_tag to struct object_id ...
2017-05-08object: convert parse_object* to take struct object_idLibravatar brian m. carlson1-1/+1
Make parse_object, parse_object_or_die, and parse_object_buffer take a pointer to struct object_id. Remove the temporary variables inserted earlier, since they are no longer necessary. Transform all of the callers using the following semantic patch: @@ expression E1; @@ - parse_object(E1.hash) + parse_object(&E1) @@ expression E1; @@ - parse_object(E1->hash) + parse_object(E1) @@ expression E1, E2; @@ - parse_object_or_die(E1.hash, E2) + parse_object_or_die(&E1, E2) @@ expression E1, E2; @@ - parse_object_or_die(E1->hash, E2) + parse_object_or_die(E1, E2) @@ expression E1, E2, E3, E4, E5; @@ - parse_object_buffer(E1.hash, E2, E3, E4, E5) + parse_object_buffer(&E1, E2, E3, E4, E5) @@ expression E1, E2, E3, E4, E5; @@ - parse_object_buffer(E1->hash, E2, E3, E4, E5) + parse_object_buffer(E1, E2, E3, E4, E5) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-27timestamp_t: a new data type for timestampsLibravatar Johannes Schindelin1-1/+1
Git's source code assumes that unsigned long is at least as precise as time_t. Which is incorrect, and causes a lot of problems, in particular where unsigned long is only 32-bit (notably on Windows, even in 64-bit versions). So let's just use a more appropriate data type instead. In preparation for this, we introduce the new `timestamp_t` data type. By necessity, this is a very, very large patch, as it has to replace all timestamps' data type in one go. As we will use a data type that is not necessarily identical to `time_t`, we need to be very careful to use `time_t` whenever we interact with the system functions, and `timestamp_t` everywhere else. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-23parse_timestamp(): specify explicitly where we parse timestampsLibravatar Johannes Schindelin1-1/+1
Currently, Git's source code represents all timestamps as `unsigned long`. In preparation for using a more appropriate data type, let's introduce a symbol `parse_timestamp` (currently being defined to `strtoul`) where appropriate, so that we can later easily switch to, say, use `strtoull()` instead. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-10Merge branch 'rs/log-email-subject'Libravatar Junio C Hamano1-3/+4
Code clean-up. * rs/log-email-subject: pretty: use fmt_output_email_subject() log-tree: factor out fmt_output_email_subject()
2017-03-01pretty: use fmt_output_email_subject()Libravatar René Scharfe1-3/+4
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly when it's needed instead of letting log_write_email_headers() prepare it in a static buffer in advance. This simplifies storage ownership and code flow. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-11pretty: add %(trailers) format for displaying trailers of a commit messageLibravatar Jacob Keller1-0/+17
Recent patches have expanded on the trailers.c code and we have the builtin commant git-interpret-trailers which can be used to add or modify trailer lines. However, there is no easy way to simply display the trailers of a commit message. Add support for %(trailers) format modifier which will use the trailer_info_get() calls to read trailers in an identical way as git interpret-trailers does. Use a long format option instead of a short name so that future work can more easily unify ref-filter and pretty formats. Add documentation and tests for the same. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-28Merge branch 'rs/cocci' into maintLibravatar Junio C Hamano1-7/+5
Code cleanup. * rs/cocci: use strbuf_add_unique_abbrev() for adding short hashes, part 3 remove unnecessary NULL check before free(3) coccicheck: make transformation for strbuf_addf(sb, "...") more precise use strbuf_add_unique_abbrev() for adding short hashes, part 2 use strbuf_addstr() instead of strbuf_addf() with "%s", part 2 gitignore: ignore output files of coccicheck make target use strbuf_addstr() for adding constant strings to a strbuf, part 2 add coccicheck make target contrib/coccinelle: fix semantic patch for oid_to_hex_r()
2016-10-28Merge branch 'rs/c-auto-resets-attributes' into maintLibravatar Junio C Hamano1-0/+2
When "%C(auto)" appears at the very beginning of the pretty format string, it did not need to issue the reset sequence, but it did. This is a small optimization to already graduated topic. * rs/c-auto-resets-attributes: pretty: avoid adding reset for %C(auto) if output is empty pretty: let %C(auto) reset all attributes
2016-10-26Merge branch 'mg/gpg-richer-status'Libravatar Junio C Hamano1-0/+4
The GPG verification status shown in "%G?" pretty format specifier was not rich enough to differentiate a signature made by an expired key, a signature made by a revoked key, etc. New output letters have been assigned to express them. * mg/gpg-richer-status: gpg-interface: use more status letters
2016-10-17Merge branch 'rs/cocci'Libravatar Junio C Hamano1-7/+5
Code cleanup. * rs/cocci: use strbuf_add_unique_abbrev() for adding short hashes, part 3 remove unnecessary NULL check before free(3)
2016-10-12gpg-interface: use more status lettersLibravatar Michael J Gruber1-0/+4
According to gpg2's doc/DETAILS: For each signature only one of the codes GOODSIG, BADSIG, EXPSIG, EXPKEYSIG, REVKEYSIG or ERRSIG will be emitted. gpg1 ("classic") behaves the same (although doc/DETAILS differs). Currently, we parse gpg's status output for GOODSIG, BADSIG and trust information and translate that into status codes G, B, U, N for the %G? format specifier. git-verify-* returns success in the GOODSIG case only. This is somewhat in disagreement with gpg, which considers the first 5 of the 6 above as VALIDSIG, but we err on the very safe side. Introduce additional status codes E, X, Y, R for ERRSIG, EXPSIG, EXPKEYSIG, and REVKEYSIG so that a user of %G? gets more information about the absence of a 'G' on first glance. Requested-by: Alex <agrambot@gmail.com> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-10use strbuf_add_unique_abbrev() for adding short hashes, part 3Libravatar René Scharfe1-7/+5
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs instead of taking detours through find_unique_abbrev() and its static buffer. This is shorter in most cases and a bit more efficient. The changes here are not easily handled by a semantic patch because they involve removing temporary variables and deconstructing format strings for strbuf_addf(). Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-06Merge branch 'rs/c-auto-resets-attributes'Libravatar Junio C Hamano1-1/+1
When "%C(auto)" appears at the very beginning of the pretty format string, it did not need to issue the reset sequence, but it did. * rs/c-auto-resets-attributes: pretty: avoid adding reset for %C(auto) if output is empty
2016-09-29pretty: avoid adding reset for %C(auto) if output is emptyLibravatar René Scharfe1-1/+1
We emit an escape sequence for resetting color and attribute for %C(auto) to make sure automatic coloring is displayed as intended. Stop doing that if the output strbuf is empty, i.e. when %C(auto) appears at the start of the format string, because then there is no need for a reset and we save a few bytes in the output. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-26Merge branch 'rs/c-auto-resets-attributes'Libravatar Junio C Hamano1-0/+2
The pretty-format specifier "%C(auto)" used by the "log" family of commands to enable coloring of the output is taught to also issue a color-reset sequence to the output. * rs/c-auto-resets-attributes: pretty: let %C(auto) reset all attributes
2016-09-19Merge branch 'rs/hex2chr' into maintLibravatar Junio C Hamano1-8/+5
Code cleanup. * rs/hex2chr: introduce hex2chr() for converting two hexadecimal digits to a character
2016-09-19pretty: let %C(auto) reset all attributesLibravatar René Scharfe1-0/+2
Reset colors and attributes upon %C(auto) to enable full automatic control over them; otherwise attributes like bold or reverse could still be in effect from previous %C placeholders. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-12Merge branch 'rs/hex2chr'Libravatar Junio C Hamano1-8/+5
* rs/hex2chr: introduce hex2chr() for converting two hexadecimal digits to a character
2016-09-07introduce hex2chr() for converting two hexadecimal digits to a characterLibravatar René Scharfe1-8/+5
Add and use a helper function that decodes the char value of two hexadecimal digits. It returns a negative number on error, avoids running over the end of the given string and doesn't shift negative values. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-12Merge branch 'rs/use-strbuf-add-unique-abbrev'Libravatar Junio C Hamano1-7/+6
A small code clean-up. * rs/use-strbuf-add-unique-abbrev: use strbuf_add_unique_abbrev() for adding short hashes
2016-08-06use strbuf_add_unique_abbrev() for adding short hashesLibravatar René Scharfe1-7/+6
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs instead of taking detours through find_unique_abbrev() and its static buffer. This is shorter and a bit more efficient. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-28Merge branch 'js/find-commit-subject-ignore-leading-blanks' into maintLibravatar Junio C Hamano1-8/+8
A helper function that takes the contents of a commit object and finds its subject line did not ignore leading blank lines, as is commonly done by other codepaths. Make it ignore leading blank lines to match. * js/find-commit-subject-ignore-leading-blanks: reset --hard: skip blank lines when reporting the commit subject sequencer: use skip_blank_lines() to find the commit subject commit -C: skip blank lines at the beginning of the message commit.c: make find_commit_subject() more robust pretty: make the skip_blank_lines() function public
2016-07-11Merge branch 'nd/graph-width-padded' into maintLibravatar Junio C Hamano1-1/+8
"log --graph --format=" learned that "%>|(N)" specifies the width relative to the terminal's left edge, not relative to the area to draw text that is to the right of the ancestry-graph section. It also now accepts negative N that means the column limit is relative to the right border. * nd/graph-width-padded: pretty.c: support <direction>|(<negative number>) forms pretty: pass graph width to pretty formatting for use in '%>|(N)'
2016-07-11Merge branch 'js/find-commit-subject-ignore-leading-blanks'Libravatar Junio C Hamano1-8/+8
A helper function that takes the contents of a commit object and finds its subject line did not ignore leading blank lines, as is commonly done by other codepaths. Make it ignore leading blank lines to match. * js/find-commit-subject-ignore-leading-blanks: reset --hard: skip blank lines when reporting the commit subject sequencer: use skip_blank_lines() to find the commit subject commit -C: skip blank lines at the beginning of the message commit.c: make find_commit_subject() more robust pretty: make the skip_blank_lines() function public
2016-07-06Merge branch 'nd/graph-width-padded'Libravatar Junio C Hamano1-1/+8
"log --graph --format=" learned that "%>|(N)" specifies the width relative to the terminal's left edge, not relative to the area to draw text that is to the right of the ancestry-graph section. It also now accepts negative N that means the column limit is relative to the right border. * nd/graph-width-padded: pretty.c: support <direction>|(<negative number>) forms pretty: pass graph width to pretty formatting for use in '%>|(N)'
2016-07-06Merge branch 'ew/mboxrd-format-am'Libravatar Junio C Hamano1-8/+25
Teach format-patch and mailsplit (hence "am") how a line that happens to begin with "From " in the e-mail message is quoted with ">", so that these lines can be restored to their original shape. * ew/mboxrd-format-am: am: support --patch-format=mboxrd mailsplit: support unescaping mboxrd messages pretty: support "mboxrd" output format
2016-06-27Merge branch 'et/pretty-format-c-auto' into maintLibravatar Junio C Hamano1-1/+1
The commands in `git log` family take %C(auto) in a custom format string. This unconditionally turned the color on, ignoring --no-color or with --color=auto when the output is not connected to a tty; this was corrected to make the format truly behave as "auto". * et/pretty-format-c-auto: format_commit_message: honor `color=auto` for `%C(auto)`
2016-06-22pretty: make the skip_blank_lines() function publicLibravatar Johannes Schindelin1-8/+8
This function will be used also in the find_commit_subject() function. While at it, rename the function to reflect that it skips not only empty lines, but any lines consisting of only whitespace, too. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-20Merge branch 'et/pretty-format-c-auto'Libravatar Junio C Hamano1-1/+1
The commands in `git log` family take %C(auto) in a custom format string. This unconditionally turned the color on, ignoring --no-color or with --color=auto when the output is not connected to a tty; this was corrected to make the format truly behave as "auto". * et/pretty-format-c-auto: format_commit_message: honor `color=auto` for `%C(auto)`
2016-06-16pretty.c: support <direction>|(<negative number>) formsLibravatar Nguyễn Thái Ngọc Duy1-1/+7
%>|(num), %><|(num) and %<|(num), where num is a positive number, sets a fixed column from the screen's left border. There is no way for us to specifiy a column relative to the right border, which is useful when you want to make use of all terminal space (on big screens). Use negative num for that. Inspired by Go's array syntax (*). (*) I know Python has this first (or before Go, at least) but the idea didn't occur to me until I learned Go. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-16pretty: pass graph width to pretty formatting for use in '%>|(N)'Libravatar Josef Kufner1-0/+1
Pass graph width to pretty formatting, to make N in '%>|(N)' include columns consumed by graph rendered when --graph option is in use. For example, in the output of git log --all --graph --pretty='format: [%>|(20)%h] %ar%d' this change will make all commit hashes align at 20th column from the edge of the terminal, not from the edge of the graph. Signed-off-by: Josef Kufner <josef@kufner.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-06pretty: support "mboxrd" output formatLibravatar Eric Wong1-8/+25
This output format prevents format-patch output from breaking readers if somebody copy+pasted an mbox into a commit message. Unlike the traditional "mboxo" format, "mboxrd" is designed to be fully-reversible. "mboxrd" also gracefully degrades to showing extra ">" in existing "mboxo" readers. This degradation is preferable to breaking message splitting completely, a problem I've seen in "mboxcl" due to having multiple, non-existent, or inaccurate Content-Length headers. "mboxcl2" is a non-starter since it's inherits the problems of "mboxcl" while being completely incompatible with existing tooling based around mailsplit. ref: http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/mail-mbox-formats.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-27format_commit_message: honor `color=auto` for `%C(auto)`Libravatar Edward Thomson1-1/+1
git-log(1) documents that when specifying the `%C(auto)` format placeholder will "turn on auto coloring on the next %placeholders until the color is switched again." However, when `%C(auto)` is used, the present implementation will turn colors on unconditionally (even if the color configuration is turned off for the current context - for example, `--no-color` was specified or the color is `auto` and the output is not a tty). Update `format_commit_one` to examine the current context when a format string of `%C(auto)` is specified, which ensures that we will not unconditionally write colors. This brings that behavior in line with the behavior of `%C(auto,<colorname>)`, and allows the user the ability to specify that color should be displayed only when the output is a tty. Additionally, add a test for `%C(auto)` and update the existing tests for `%C(auto,...)` as they were misidentified as being applicable to `%C(auto)`. Tests from Jeff King. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Edward Thomson <ethomson@edwardthomson.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-30pretty: allow tweaking tabwidth in --expand-tabsLibravatar Junio C Hamano1-7/+8
When the local convention of the project is to use tab width that is not 8, it may make sense to allow "git log --expand-tabs=<n>" to tweak the output to match it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-30pretty: enable --expand-tabs by default for selected pretty formatsLibravatar Junio C Hamano1-7/+11
"git log --pretty={medium,full,fuller}" and "git log" by default prepend 4 spaces to the log message, so it makes sense to enable the new "expand-tabs" facility by default for these formats. Add --no-expand-tabs option to override the new default. The change alone breaks a test in t4201 that runs "git shortlog" on the output from "git log", and expects that the output from "git log" does not do such a tab expansion. Adjust the test to explicitly disable expand-tabs with --no-expand-tabs. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-30pretty: expand tabs in indented logs to make things line up properlyLibravatar Linus Torvalds1-2/+69
A commit log message sometimes tries to line things up using tabs, assuming fixed-width font with the standard 8-place tab settings. Viewing such a commit however does not work well in "git log", as we indent the lines by prefixing 4 spaces in front of them. This should all line up: Column 1 Column 2 -------- -------- A B ABCD EFGH SPACES Instead of Tabs Even with multi-byte UTF8 characters: Column 1 Column 2 -------- -------- Ä B åäö 100 A Møøse once bit my sister.. Tab-expand the lines in "git log --expand-tabs" output before prefixing 4 spaces. This is based on the patch by Linus Torvalds, but at this step, we require an explicit command line option to enable the behaviour. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-20Remove get_object_hash.Libravatar brian m. carlson1-4/+4
Convert all instances of get_object_hash to use an appropriate reference to the hash member of the oid member of struct object. This provides no functional change, as it is essentially a macro substitution. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Jeff King <peff@peff.net>