summaryrefslogtreecommitdiff
path: root/pretty.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-07format-patch: teach --no-encode-email-headersLibravatar Emma Brooks1-2/+4
When commit subjects or authors have non-ASCII characters, git format-patch Q-encodes them so they can be safely sent over email. However, if the patch transfer method is something other than email (web review tools, sneakernet), this only serves to make the patch metadata harder to read without first applying it (unless you can decode RFC 2047 in your head). git am as well as some email software supports non-Q-encoded mail as described in RFC 6531. Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the user control this behavior. Signed-off-by: Emma Brooks <me@pluvano.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-17Merge branch 'rs/strbuf-insertstr'Libravatar Junio C Hamano1-2/+2
Code clean-up. * rs/strbuf-insertstr: mailinfo: don't insert header prefix for handle_content_type() strbuf: add and use strbuf_insertstr()
2020-02-10strbuf: add and use strbuf_insertstr()Libravatar René Scharfe1-2/+2
Add a function for inserting a C string into a strbuf. Use it throughout the source to get rid of magic string length constants and explicit strlen() calls. Like strbuf_addstr(), implement it as an inline function to avoid the implicit strlen() calls to cause runtime overhead. Helped-by: Taylor Blau <me@ttaylorr.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-30Merge branch 'hi/gpg-mintrustlevel'Libravatar Junio C Hamano1-1/+29
gpg.minTrustLevel configuration variable has been introduced to tell various signature verification codepaths the required minimum trust level. * hi/gpg-mintrustlevel: gpg-interface: add minTrustLevel as a configuration option
2020-01-15gpg-interface: add minTrustLevel as a configuration optionLibravatar Hans Jerry Illikainen1-1/+29
Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-10Merge branch 'dl/pretty-reference'Libravatar Junio C Hamano1-6/+14
"git log" family learned "--pretty=reference" that gives the name of a commit in the format that is often used to refer to it in log messages. * dl/pretty-reference: SubmittingPatches: use `--pretty=reference` pretty: implement 'reference' format pretty: add struct cmt_fmt_map::default_date_mode_type pretty: provide short date format t4205: cover `git log --reflog -z` blindspot pretty.c: inline initalize format_context revision: make get_revision_mark() return const pointer completion: complete `tformat:` pretty format SubmittingPatches: remove dq from commit reference pretty-formats.txt: use generic terms for hash SubmittingPatches: use generic terms for hash
2019-11-20pretty: implement 'reference' formatLibravatar Denton Liu1-1/+3
The standard format for referencing other commits within some projects (such as git.git) is the reference format. This is described in Documentation/SubmittingPatches as If you want to reference a previous commit in the history of a stable branch, use the format "abbreviated hash (subject, date)", like this: .... Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30) noticed that ... .... Since this format is so commonly used, standardize it as a pretty format. The tests that are implemented essentially show that the format-string does not change in response to various log options. This is useful because, for future developers, it shows that we've considered the limitations of the "canned format-string" approach and we are fine with them. Based-on-a-patch-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-20pretty: add struct cmt_fmt_map::default_date_mode_typeLibravatar Denton Liu1-0/+3
In a future commit, we plan on having a pretty format which will use a default date format unless otherwise overidden. Add support for this by adding a `default_date_mode_type` member in `struct cmt_fmt_map`. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-20pretty: provide short date formatLibravatar René Scharfe1-0/+3
Add the placeholders %as and %cs to format author date and committer date, respectively, without the time part, like --date=short does, i.e. like YYYY-MM-DD. Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-20pretty.c: inline initalize format_contextLibravatar Denton Liu1-5/+5
Instead of memsetting and then initializing the fields in the struct, move the initialization of `format_context` to its assignment. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-30pretty: add "%aL" etc. to show local-part of email addressesLibravatar Prarit Bhargava1-1/+8
In many projects the number of contributors is low enough that users know each other and the full email address doesn't need to be displayed. Displaying only the author's username saves a lot of columns on the screen. Existing 'e/E' (as in "%ae" and "%aE") placeholders would show the author's address as "prarit@redhat.com", which would waste columns to show the same domain-part for all contributors when used in a project internal to redhat. Introduce 'l/L' placeholders that strip '@' and domain part from the e-mail address. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-09log-tree: call load_ref_decorations() in get_name_decoration()Libravatar René Scharfe1-2/+0
Load a default set of ref name decorations at the first lookup. This frees direct and indirect callers from doing so. They can still do it if they want to use a filter or are interested in full decorations instead of the default short ones -- the first load_ref_decorations() call wins. This means that the load in builtin/log.c::cmd_log_init_finish() is respected even if --simplify-by-decoration is given, as the previously dominating earlier load in handle_revision_opt() is gone. So a filter given with --decorate-refs-exclude is used for simplification in that case, as expected. Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-17use COPY_ARRAY for copying arraysLibravatar René Scharfe1-2/+2
Convert calls of memcpy(3) to use COPY_ARRAY, which shortens and simplifies the code a bit. Patch generated by Coccinelle and contrib/coccinelle/array.cocci. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-20pretty: drop unused strbuf from parse_padding_placeholder()Libravatar Jeff King1-3/+2
Unlike other parts of the --pretty user-format expansion, this function is not actually writing to the output, but instead just storing the padding values into a context struct. We don't need to be passed a strbuf at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-20pretty: drop unused "type" parameter in needs_rfc2047_encoding()Libravatar Jeff King1-4/+3
The "should we encode" check was split off from add_rfc2047() into its own function in 41dd00bad3 (format-patch: fix rfc2047 address encoding with respect to rfc822 specials, 2012-10-18). But only the "add" half needs to know the rfc2047_type, since it only affects _how_ we encode, not whether we do. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-07Merge branch 'nd/completion-more-parameters'Libravatar Junio C Hamano1-0/+4
The command line completion (in contrib/) has been taught to complete more subcommand parameters. * nd/completion-more-parameters: completion: add more parameter value completion
2019-03-07Merge branch 'aw/pretty-trailers'Libravatar Junio C Hamano1-18/+95
The %(trailers) formatter in "git log --format=..." now allows to optionally pick trailers selectively by keyword, show only values, etc. * aw/pretty-trailers: pretty: add support for separator option in %(trailers) strbuf: separate callback for strbuf_expand:ing literals pretty: add support for "valueonly" option in %(trailers) pretty: allow showing specific trailers pretty: single return path in %(trailers) handling pretty: allow %(trailers) options with explicit value doc: group pretty-format.txt placeholders descriptions
2019-02-20completion: add more parameter value completionLibravatar Nguyễn Thái Ngọc Duy1-0/+4
This adds value completion for a couple more paramters. To make it easier to maintain these hard coded lists, add a comment at the original list/code to remind people to update git-completion.bash too. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-05Merge branch 'sb/more-repo-in-api'Libravatar Junio C Hamano1-13/+15
The in-core repository instances are passed through more codepaths. * sb/more-repo-in-api: (23 commits) t/helper/test-repository: celebrate independence from the_repository path.h: make REPO_GIT_PATH_FUNC repository agnostic commit: prepare free_commit_buffer and release_commit_memory for any repo commit-graph: convert remaining functions to handle any repo submodule: don't add submodule as odb for push submodule: use submodule repos for object lookup pretty: prepare format_commit_message to handle arbitrary repositories commit: prepare logmsg_reencode to handle arbitrary repositories commit: prepare repo_unuse_commit_buffer to handle any repo commit: prepare get_commit_buffer to handle any repo commit-reach: prepare in_merge_bases[_many] to handle any repo commit-reach: prepare get_merge_bases to handle any repo commit-reach.c: allow get_merge_bases_many_0 to handle any repo commit-reach.c: allow remove_redundant to handle any repo commit-reach.c: allow merge_bases_many to handle any repo commit-reach.c: allow paint_down_to_common to handle any repo commit: allow parse_commit* to handle any repo object: parse_object to honor its repository argument object-store: prepare has_{sha1, object}_file to handle any repo object-store: prepare read_object_file to deal with any repo ...
2019-01-29pretty: add support for separator option in %(trailers)Libravatar Anders Waldenborg1-0/+10
By default trailer lines are terminated by linebreaks ('\n'). By specifying the new 'separator' option they will instead be separated by user provided string and have separator semantics rather than terminator semantics. The separator string can contain the literal formatting codes %n and %xNN allowing it to be things that are otherwise hard to type such as %x00, or comma and end-parenthesis which would break parsing. E.g: $ git log --pretty='%(trailers:key=Reviewed-by,valueonly,separator=%x00)' Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-29strbuf: separate callback for strbuf_expand:ing literalsLibravatar Anders Waldenborg1-11/+5
Expanding '%n' and '%xNN' is generic functionality, so extract that from the pretty.c formatter into a callback that can be reused. No functional change intended Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-29pretty: add support for "valueonly" option in %(trailers)Libravatar Anders Waldenborg1-1/+2
With the new "key=" option to %(trailers) it often makes little sense to show the key, as it by definition already is knows which trailer is printed there. This new "valueonly" option makes it omit the key when printing trailers. E.g.: $ git show -s --pretty='%s%n%(trailers:key=Signed-off-by,valueonly)' aaaa88182 will show: > upload-pack: fix broken if/else chain in config callback > Jeff King <peff@peff.net> > Junio C Hamano <gitster@pobox.com> Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-29pretty: allow showing specific trailersLibravatar Anders Waldenborg1-2/+34
Adds a new "key=X" option to "%(trailers)" which will cause it to only print trailer lines which match any of the specified keys. Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-29pretty: single return path in %(trailers) handlingLibravatar Anders Waldenborg1-1/+3
No functional change intended. This change may not seem useful on its own, but upcoming commits will do memory allocation in there, and a single return path makes deallocation easier. Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-29pretty: allow %(trailers) options with explicit valueLibravatar Anders Waldenborg1-7/+45
In addition to old %(trailers:only) it is now allowed to write %(trailers:only=yes) By itself this only gives (the not quite so useful) possibility to have users change their mind in the middle of a formatting string (%(trailers:only=true,only=false)). However, it gives users the opportunity to override defaults from future options. Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-11log: add %S option (like --source) to log --formatLibravatar Issac Trotts1-0/+12
Make it possible to write for example git log --format="%H,%S" where the %S at the end is a new placeholder that prints out the ref (tag/branch) for each commit. Using %d might seem like an alternative but it only shows the ref for the last commit in the branch. Signed-off-by: Issac Trotts <issactrotts@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14pretty: prepare format_commit_message to handle arbitrary repositoriesLibravatar Stefan Beller1-7/+8
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14commit: prepare logmsg_reencode to handle arbitrary repositoriesLibravatar Stefan Beller1-6/+7
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-03Merge branch 'mg/gpg-fingerprint'Libravatar Junio C Hamano1-0/+8
New "--pretty=format:" placeholders %GF and %GP that show the GPG key fingerprints have been invented. * mg/gpg-fingerprint: gpg-interface.c: obtain primary key fingerprint as well gpg-interface.c: support getting key fingerprint via %GF format gpg-interface.c: use flags to determine key/signer info presence
2018-10-23gpg-interface.c: obtain primary key fingerprint as wellLibravatar Michał Górny1-0/+4
Obtain the primary key fingerprint off VALIDSIG status message, and expose it via %GP format. Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-23gpg-interface.c: support getting key fingerprint via %GF formatLibravatar Michał Górny1-0/+4
Support processing VALIDSIG status that provides additional information for valid signatures. Use this information to propagate signing key fingerprint and expose it via %GF pretty format. This format can be used to build safer key verification systems that verify the key via complete fingerprint rather than short/long identifier provided by %GK. Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17Merge branch 'jk/trailer-fixes'Libravatar Junio C Hamano1-0/+3
"git interpret-trailers" and its underlying machinery had a buggy code that attempted to ignore patch text after commit log message, which triggered in various codepaths that will always get the log message alone and never get such an input. * jk/trailer-fixes: append_signoff: use size_t for string offsets sequencer: ignore "---" divider when parsing trailers pretty, ref-filter: format %(trailers) with no_divider option interpret-trailers: allow suppressing "---" divider interpret-trailers: tighten check for "---" patch boundary trailer: pass process_trailer_opts to trailer_info_get() trailer: use size_t for iterating trailer list trailer: use size_t for string offsets
2018-08-23pretty, ref-filter: format %(trailers) with no_divider optionLibravatar Jeff King1-0/+3
In both of these cases we know that we are feeding the trailer-parsing code a pure commit message. We should tell it so, which avoids false positives for a commit message that contains a "---" line. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-15Merge branch 'jk/size-t'Libravatar Junio C Hamano1-1/+1
Code clean-up to use size_t/ssize_t when they are the right type. * jk/size-t: strbuf_humanise: use unsigned variables pass st.st_size as hint for strbuf_readlink() strbuf_readlink: use ssize_t strbuf: use size_t for length in intermediate variables reencode_string: use size_t for string lengths reencode_string: use st_add/st_mult helpers
2018-08-02Merge branch 'sb/object-store-lookup'Libravatar Junio C Hamano1-2/+2
lookup_commit_reference() and friends have been updated to find in-core object for a specific in-core repository instance. * sb/object-store-lookup: (32 commits) commit.c: allow lookup_commit_reference to handle arbitrary repositories commit.c: allow lookup_commit_reference_gently to handle arbitrary repositories tag.c: allow deref_tag to handle arbitrary repositories object.c: allow parse_object to handle arbitrary repositories object.c: allow parse_object_buffer to handle arbitrary repositories commit.c: allow get_cached_commit_buffer to handle arbitrary repositories commit.c: allow set_commit_buffer to handle arbitrary repositories commit.c: migrate the commit buffer to the parsed object store commit-slabs: remove realloc counter outside of slab struct commit.c: allow parse_commit_buffer to handle arbitrary repositories tag: allow parse_tag_buffer to handle arbitrary repositories tag: allow lookup_tag to handle arbitrary repositories commit: allow lookup_commit to handle arbitrary repositories tree: allow lookup_tree to handle arbitrary repositories blob: allow lookup_blob to handle arbitrary repositories object: allow lookup_object to handle arbitrary repositories object: allow object_as_type to handle arbitrary repositories tag: add repository argument to deref_tag tag: add repository argument to parse_tag_buffer tag: add repository argument to lookup_tag ...
2018-07-24reencode_string: use size_t for string lengthsLibravatar Jeff King1-1/+1
The iconv interface takes a size_t, which is the appropriate type for an in-memory buffer. But our reencode_string_* functions use integers, meaning we may get confusing results when the sizes exceed INT_MAX. Let's use size_t consistently. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16pretty: switch hard-coded constants to the_hash_algoLibravatar brian m. carlson1-2/+2
Switch several hard-coded constants into expressions based either on GIT_MAX_HEXSZ or the_hash_algo. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29commit: add repository argument to get_cached_commit_bufferLibravatar Stefan Beller1-1/+1
Add a repository argument to allow callers of get_cached_commit_buffer to be more specific about which repository to handle. This is a small mechanical change; it doesn't change the implementation to handle repositories other than the_repository yet. As with the previous commits, use a macro to catch callers passing a repository other than the_repository at compile time. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29object: add repository argument to parse_objectLibravatar Stefan Beller1-1/+1
Add a repository argument to allow the callers of parse_object to be more specific about which repository to act on. This is a small mechanical change; it doesn't change the implementation to handle repositories other than the_repository yet. As with the previous commits, use a macro to catch callers passing a repository other than the_repository at compile time. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-23Merge branch 'ds/lazy-load-trees'Libravatar Junio C Hamano1-2/+3
The code has been taught to use the duplicated information stored in the commit-graph file to learn the tree object name for a commit to avoid opening and parsing the commit object when it makes sense to do so. * ds/lazy-load-trees: coccinelle: avoid wrong transformation suggestions from commit.cocci commit-graph: lazy-load trees for commits treewide: replace maybe_tree with accessor methods commit: create get_commit_tree() method treewide: rename tree to maybe_tree
2018-04-11treewide: replace maybe_tree with accessor methodsLibravatar Derrick Stolee1-2/+3
In anticipation of making trees load lazily, create a Coccinelle script (contrib/coccinelle/commit.cocci) to ensure that all references to the 'maybe_tree' member of struct commit are either mutations or accesses through get_commit_tree() or get_commit_tree_oid(). Apply the Coccinelle script to create the rest of the patch. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-11treewide: rename tree to maybe_treeLibravatar Derrick Stolee1-2/+2
Using the commit-graph file to walk commit history removes the large cost of parsing commits during the walk. This exposes a performance issue: lookup_tree() takes a large portion of the computation time, even when Git never uses those trees. In anticipation of lazy-loading these trees, rename the 'tree' member of struct commit to 'maybe_tree'. This serves two purposes: it hints at the future role of possibly being NULL even if the commit has a valid tree, and it allows for unambiguous transformation from simple member access (i.e. commit->maybe_tree) to method access. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14strbuf: convert strbuf_add_unique_abbrev to use struct object_idLibravatar brian m. carlson1-4/+4
Convert the declaration and definition of strbuf_add_unique_abbrev to make it take a pointer to struct object_id. Predeclare the struct in strbuf.h, as cache.h includes strbuf.h before it declares the struct, and otherwise the struct declaration would have the wrong scope. Apply the following semantic patch, along with the standard object_id transforms, to adjust the callers: @@ expression E1, E2, E3; @@ - strbuf_add_unique_abbrev(E1, E2.hash, E3); + strbuf_add_unique_abbrev(E1, &E2, E3); @@ expression E1, E2, E3; @@ - strbuf_add_unique_abbrev(E1, E2->hash, E3); + strbuf_add_unique_abbrev(E1, E2, E3); Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-22log: add option to choose which refs to decorateLibravatar Rafael Ascensão1-2/+2
When `log --decorate` is used, git will decorate commits with all available refs. While in most cases this may give the desired effect, under some conditions it can lead to excessively verbose output. Introduce two command line options, `--decorate-refs=<pattern>` and `--decorate-refs-exclude=<pattern>` to allow the user to select which refs are used in decoration. When "--decorate-refs=<pattern>" is given, only the refs that match the pattern are used in decoration. The refs that match the pattern when "--decorate-refs-exclude=<pattern>" is given, are never used in decoration. These options follow the same convention for mixing negative and positive patterns across the system, assuming that the inclusive default is to match all refs available. (1) if there is no positive pattern given, pretend as if an inclusive default positive pattern was given; (2) for each candidate, reject it if it matches no positive pattern, or if it matches any one of the negative patterns. The rules for what is considered a match are slightly different from the rules used elsewhere. Commands like `log --glob` assume a trailing '/*' when glob chars are not present in the pattern. This makes it difficult to specify a single ref. On the other hand, commands like `describe --match --all` allow specifying exact refs, but do not have the convenience of allowing "shorthand refs" like 'refs/heads' or 'heads' to refer to 'refs/heads/*'. The commands introduced in this patch consider a match if: (a) the pattern contains globs chars, and regular pattern matching returns a match. (b) the pattern does not contain glob chars, and ref '<pattern>' exists, or if ref exists under '<pattern>/' This allows both behaviours (allowing single refs and shorthand refs) yet remaining compatible with existent commands. Helped-by: Kevin Daudt <me@ikke.info> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-02pretty.c: delimit "%(trailers)" arguments with ","Libravatar Taylor Blau1-5/+28
In preparation for adding consistent "%(trailers)" atom options to `git-for-each-ref(1)`'s "--format" argument, change "%(trailers)" in pretty.c to separate sub-arguments with a ",", instead of a ":". Multiple sub-arguments are given either as "%(trailers:unfold,only)" or "%(trailers:only,unfold)". This change disambiguates between "top-level" arguments, and arguments given to the trailers atom itself. It is consistent with the behavior of "%(upstream)" and "%(push)" atoms. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-26Merge branch 'jk/trailers-parse'Libravatar Junio C Hamano1-13/+13
"git interpret-trailers" has been taught a "--parse" and a few other options to make it easier for scripts to grab existing trailer lines from a commit log message. * jk/trailers-parse: doc/interpret-trailers: fix "the this" typo pretty: support normalization options for %(trailers) t4205: refactor %(trailers) tests pretty: move trailer formatting to trailer.c interpret-trailers: add --parse convenience option interpret-trailers: add an option to unfold values interpret-trailers: add an option to show only existing trailers interpret-trailers: add an option to show only the trailers trailer: put process_trailers() options into a struct
2017-08-15pretty: support normalization options for %(trailers)Libravatar Jeff King1-3/+12
The interpret-trailers command recently learned some options to make its output easier to parse (for a caller whose only interested in picking out the trailer values). But it's not very efficient for asking for the trailers of many commits in a single invocation. We already have "%(trailers)" to do that, but it doesn't know about unfolding or omitting non-trailers. Let's plumb those options through, so you can have the best of both. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-15pretty: move trailer formatting to trailer.cLibravatar Jeff King1-11/+2
The next commit will add many features to the %(trailer) placeholder in pretty.c. We'll need to access some internal functions of trailer.c for that, so our options are either: 1. expose those functions publicly or 2. make an entry point into trailer.c to do the formatting Doing (2) ends up exposing less surface area, though do note that caveats in the docstring of the new function. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-13pretty: respect color settings for %C placeholdersLibravatar Jeff King1-4/+23
The color placeholders have traditionally been unconditional, showing colors even when git is not otherwise configured to do so. This was not so bad for their original use, which was on the command-line (and the user could decide at that moment whether to add colors or not). But these days we have configured formats via pretty.*, and those should operate correctly in multiple contexts. In 3082517 (log --format: teach %C(auto,black) to respect color config, 2012-12-17), we gave an extended placeholder that could be used to accomplish this. But it's rather clunky to use, because you have to specify it individually for each color (and their matching resets) in the format. We shied away from just switching the default to auto, because it is technically breaking backwards compatibility. However, there's not really a use case for unconditional colors. The most plausible reason you would want them is to redirect "git log" output to a file. But there, the right answer is --color=always, as it does the right thing both with custom user-format colors and git-generated colors. So let's switch to the more useful default. In the off-chance that somebody really does find a use for unconditional colors without wanting to enable the rest of git's colors, we provide a new %C(always,...) to enable the old behavior. And we can remind them of --color=always in the documentation. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-10Merge branch 'rs/pretty-add-again' into maintLibravatar Junio C Hamano1-32/+0
The pretty-format specifiers like '%h', '%t', etc. had an optimization that no longer works correctly. In preparation/hope of getting it correctly implemented, first discard the optimization that is broken. * rs/pretty-add-again: pretty: recalculate duplicate short hashes