| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the placeholders %ah and %ch to format author date and committer
date, like --date=human does, which provides more humanity date output.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --format='...'" learned "%(describe)" placeholder.
* rs/pretty-describe:
archive: expand only a single %(describe) per archive
pretty: document multiple %(describe) being inconsistent
t4205: assert %(describe) test coverage
pretty: add merge and exclude options to %(describe)
pretty: add %(describe)
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every %(describe) placeholder in $Format:...$ strings in files with the
attribute export-subst is expanded by calling git describe. This can
potentially result in a lot of such calls per archive. That's OK for
local repositories under control of the user of git archive, but could
be a problem for hosted repositories.
Expand only a single %(describe) placeholder per archive for now to
avoid denial-of-service attacks. We can make this limit configurable
later if needed, but let's start out simple.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic to handle "trailer" related placeholders in the
"--format=" mechanisms in the "log" family and "for-each-ref"
family is getting unified.
* hv/trailer-formatting:
ref-filter: use pretty.c logic for trailers
pretty.c: capture invalid trailer argument
pretty.c: refactor trailer logic to `format_set_trailers_options()`
t6300: use function to test trailer options
|
|
Allow restricting the tags used by the placeholder %(describe) with the
options match and exclude. E.g. the following command describes the
current commit using official version tags, without those for release
candidates:
$ git log -1 --format='%(describe:match=v[0-9]*,exclude=*rc*)'
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a format placeholder for describe output. Implement it by actually
calling git describe, which is simple and guarantees correctness. It's
intended to be used with $Format:...$ in files with the attribute
export-subst and git archive. It can also be used with git log etc.,
even though that's going to be slow due to the fork for each commit.
Suggested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we would like to use this trailers logic in the ref-filter, it's
nice to get an invalid trailer argument. This will allow us to print
precise error message while using `format_set_trailers_options()` in
ref-filter.
For capturing the invalid argument, we changed the working of
`format_set_trailers_options()` a little bit.
Original logic does "break" and fell through in mainly 2 cases -
1. unknown/invalid argument
2. end of the arg string
But now instead of "break", we capture invalid argument and return
non-zero. And non-zero is handled by the caller.
(We prepared the caller to handle non-zero in the previous commit).
Capturing invalid arguments this way will also affects the working
of current logic. As at the end of the arg string it will return non-zero.
So in order to make things correct, introduced an additional conditional
statement i.e if encounter ")", do 'break'.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactored trailers formatting logic inside pretty.c to a new function
`format_set_trailers_options()`. This new function returns the non-zero
in case of unusual. The caller handles the non-zero by "goto trailers_out".
This change will allow us to reuse the same logic in other places.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we expand a user-format, we try to avoid work that isn't necessary
for the output. For instance, we don't bother parsing the commit header
until we know we need the author, subject, etc.
But we do always load the commit object's contents from disk, even if
the format doesn't require it (e.g., just "%H"). Traditionally this
didn't matter much, because we'd have loaded it as part of the traversal
anyway, and we'd typically have those bytes attached to the commit
struct (or these days, cached in a commit-slab).
But when we have a commit-graph, we might easily get to the point of
pretty-printing a commit without ever having looked at the actual object
contents. We should push off that load (and reencoding) until we're
certain that it's needed.
I think the results of p4205 show the advantage pretty clearly (we serve
parent and tree oids out of the commit struct itself, so they benefit as
well):
# using git.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 0.40(0.39+0.01) 0.03(0.02+0.01) -92.5%
4205.2: log with %h 0.45(0.44+0.01) 0.09(0.09+0.00) -80.0%
4205.3: log with %T 0.40(0.39+0.00) 0.04(0.04+0.00) -90.0%
4205.4: log with %t 0.46(0.46+0.00) 0.09(0.08+0.01) -80.4%
4205.5: log with %P 0.39(0.39+0.00) 0.03(0.03+0.00) -92.3%
4205.6: log with %p 0.46(0.46+0.00) 0.10(0.09+0.00) -78.3%
4205.7: log with %h-%h-%h 0.52(0.51+0.01) 0.15(0.14+0.00) -71.2%
4205.8: log with %an-%ae-%s 0.42(0.41+0.00) 0.42(0.41+0.01) +0.0%
# using linux.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 7.12(6.97+0.14) 0.76(0.65+0.11) -89.3%
4205.2: log with %h 7.35(7.19+0.16) 1.30(1.19+0.11) -82.3%
4205.3: log with %T 7.58(7.42+0.15) 1.02(0.94+0.08) -86.5%
4205.4: log with %t 8.05(7.89+0.15) 1.55(1.41+0.13) -80.7%
4205.5: log with %P 7.12(7.01+0.10) 0.76(0.69+0.07) -89.3%
4205.6: log with %p 7.38(7.27+0.10) 1.32(1.20+0.12) -82.1%
4205.7: log with %h-%h-%h 7.81(7.67+0.13) 1.79(1.67+0.12) -77.1%
4205.8: log with %an-%ae-%s 7.90(7.74+0.15) 7.81(7.66+0.15) -1.1%
I added the final test to show where we don't improve (the 1% there is
just lucky noise), but also as a regression test to make sure we're not
doing anything stupid like loading the commit multiple times when there
are several placeholders that need it.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove support for the magical "repo-abbrev" comment in .mailmap
files. This was added to .mailmap parsing in [1], as a generalized
feature of the git-shortlog Perl script added earlier in [2].
There was no documentation or tests for this feature, and I don't
think it's used in practice anymore.
What it did was to allow you to specify a single string to be
search-replaced with "/.../" in the .mailmap file. E.g. for
linux.git's current .mailmap:
git archive --remote=git@gitlab.com:linux-kernel/linux.git \
HEAD -- .mailmap | grep -a repo-abbrev
# repo-abbrev: /pub/scm/linux/kernel/git/
Then when running e.g.:
git shortlog --merges --author=Linus -1 v5.10-rc7..v5.10 | grep Merge
We'd emit (the [...] is mine):
Merge tag [...]git://git.kernel.org/.../tip/tip
But will now emit:
Merge tag [...]git.kernel.org/pub/scm/linux/kernel/git/tip/tip
I think at this point this is just a historical artifact we can get
rid of. It was initially meant for Linus's own use when we integrated
the Perl script[2], but since then it seems he's stopped using it.
Digging through Linus's release announcements on the LKML[3] the last
release I can find that made use of this output is Linux 2.6.25-rc6
back in March 2008[4]. Later on Linus started using --no-merges[5],
and nowadays seems to prefer some custom not-quite-shortlog format of
merges from lieutenants[6].
You will still see it on linux.git if you run "git shortlog" manually
yourself with --merges, with this removed you can still get the same
output with:
git log --pretty=fuller v5.10-rc7..v5.10 |
sed 's!/pub/scm/linux/kernel/git/!/.../!g' |
git shortlog
Arguably we should do the same for the search-replacing of "[PATCH]"
at the beginning with "". That seems to be another relic of a bygone
era when linux.git patches would have their E-Mail subject lines
applied as-is by "git am" or whatever. But we documented that feature
in "git-shortlog(1)", and it seems more widely applicable than
something purely kernel-specific.
1. 7595e2ee6ef (git-shortlog: make common repository prefix
configurable with .mailmap, 2006-11-25)
2. fa375c7f1b6 (Add git-shortlog perl script, 2005-06-04)
3. https://lore.kernel.org/lkml/
4. https://lore.kernel.org/lkml/alpine.LFD.1.00.0803161651350.3020@woody.linux-foundation.org/
5. https://lore.kernel.org/lkml/BANLkTinrbh7Xi27an3uY7pDWrNKhJRYmEA@mail.gmail.com/
6. https://lore.kernel.org/lkml/CAHk-=wg1+kf1AVzXA-RQX0zjM6t9J2Kay9xyuNqcFHWV-y5ZYw@mail.gmail.com/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a "key_value_separator" option to the "%(trailers)" pretty format,
to go along with the existing "separator" argument. In combination
these two options make it trivial to produce machine-readable (e.g. \0
and \0\0-delimited) format output.
As elaborated on in a previous commit which added "keyonly" it was
needlessly tedious to extract structured data from "%(trailers)"
before the addition of this "key_value_separator" option. As seen by
the test being added here extracting this data now becomes trivial.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for a "keyonly". This allows for easier parsing out of the
key and value. Before if you didn't want to make assumptions about how
the key was formatted. You'd need to parse it out as e.g.:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
And then proceed to deduce keys by looking at those two and
subtracting the value plus the hardcoded ": " separator from the
non-valueonly %(trailers) line. Now it's possible to simply do:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00,keyonly)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
Which at least reduces it to a state machine where you get N keys and
correlate them with N values. Even better would be to have a way to
change the ": " delimiter to something easily machine-readable (a key
might contain ": " too). A follow-up change will add support for that.
I don't really have a use-case for just "keyonly" myself. I suppose it
would be useful in some cases as "key=*" matches case-insensitively,
so a plain "keyonly" will give you the variants of the keys you
matched. I'm mainly adding it to fix the inconsistency with
"valueonly".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function 'format_sanitized_subject()' is responsible for
sanitized subject line in pretty.c
e.g.
the subject line
the-sanitized-subject-line
It would be a nice enhancement to `subject` atom to have the
same feature. So in the later commits, we plan to add this feature
to ref-filter.
Refactor `format_sanitized_subject()`, so it can be reused in
ref-filter.c for adding new modifier `sanitize` to "subject" atom.
Currently, the loop inside `format_sanitized_subject()` runs
until `\n` is found. But now, we stored the first occurrence
of `\n` in a variable `eol` and passed it in
`format_sanitized_subject()`. And the loop runs upto `eol`.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit subjects or authors have non-ASCII characters, git
format-patch Q-encodes them so they can be safely sent over email.
However, if the patch transfer method is something other than email (web
review tools, sneakernet), this only serves to make the patch metadata
harder to read without first applying it (unless you can decode RFC 2047
in your head). git am as well as some email software supports
non-Q-encoded mail as described in RFC 6531.
Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the
user control this behavior.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/strbuf-insertstr:
mailinfo: don't insert header prefix for handle_content_type()
strbuf: add and use strbuf_insertstr()
|
|
Add a function for inserting a C string into a strbuf. Use it
throughout the source to get rid of magic string length constants and
explicit strlen() calls.
Like strbuf_addstr(), implement it as an inline function to avoid the
implicit strlen() calls to cause runtime overhead.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gpg.minTrustLevel configuration variable has been introduced to
tell various signature verification codepaths the required minimum
trust level.
* hi/gpg-mintrustlevel:
gpg-interface: add minTrustLevel as a configuration option
|
|
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log" family learned "--pretty=reference" that gives the name
of a commit in the format that is often used to refer to it in log
messages.
* dl/pretty-reference:
SubmittingPatches: use `--pretty=reference`
pretty: implement 'reference' format
pretty: add struct cmt_fmt_map::default_date_mode_type
pretty: provide short date format
t4205: cover `git log --reflog -z` blindspot
pretty.c: inline initalize format_context
revision: make get_revision_mark() return const pointer
completion: complete `tformat:` pretty format
SubmittingPatches: remove dq from commit reference
pretty-formats.txt: use generic terms for hash
SubmittingPatches: use generic terms for hash
|
|
The standard format for referencing other commits within some projects
(such as git.git) is the reference format. This is described in
Documentation/SubmittingPatches as
If you want to reference a previous commit in the history of a stable
branch, use the format "abbreviated hash (subject, date)", like this:
....
Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)
noticed that ...
....
Since this format is so commonly used, standardize it as a pretty
format.
The tests that are implemented essentially show that the format-string
does not change in response to various log options. This is useful
because, for future developers, it shows that we've considered the
limitations of the "canned format-string" approach and we are fine with
them.
Based-on-a-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a future commit, we plan on having a pretty format which will use a
default date format unless otherwise overidden. Add support for this by
adding a `default_date_mode_type` member in `struct cmt_fmt_map`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the placeholders %as and %cs to format author date and committer
date, respectively, without the time part, like --date=short does, i.e.
like YYYY-MM-DD.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of memsetting and then initializing the fields in the struct,
move the initialization of `format_context` to its assignment.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many projects the number of contributors is low enough that users know
each other and the full email address doesn't need to be displayed.
Displaying only the author's username saves a lot of columns on the screen.
Existing 'e/E' (as in "%ae" and "%aE") placeholders would show the
author's address as "prarit@redhat.com", which would waste columns to show
the same domain-part for all contributors when used in a project internal
to redhat. Introduce 'l/L' placeholders that strip '@' and domain part from
the e-mail address.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Load a default set of ref name decorations at the first lookup. This
frees direct and indirect callers from doing so. They can still do it
if they want to use a filter or are interested in full decorations
instead of the default short ones -- the first load_ref_decorations()
call wins.
This means that the load in builtin/log.c::cmd_log_init_finish() is
respected even if --simplify-by-decoration is given, as the previously
dominating earlier load in handle_revision_opt() is gone. So a filter
given with --decorate-refs-exclude is used for simplification in that
case, as expected.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert calls of memcpy(3) to use COPY_ARRAY, which shortens and
simplifies the code a bit.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike other parts of the --pretty user-format expansion,
this function is not actually writing to the output, but
instead just storing the padding values into a context
struct. We don't need to be passed a strbuf at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "should we encode" check was split off from add_rfc2047() into its
own function in 41dd00bad3 (format-patch: fix rfc2047 address encoding
with respect to rfc822 specials, 2012-10-18). But only the "add" half
needs to know the rfc2047_type, since it only affects _how_ we encode,
not whether we do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
|
|
The %(trailers) formatter in "git log --format=..." now allows to
optionally pick trailers selectively by keyword, show only values,
etc.
* aw/pretty-trailers:
pretty: add support for separator option in %(trailers)
strbuf: separate callback for strbuf_expand:ing literals
pretty: add support for "valueonly" option in %(trailers)
pretty: allow showing specific trailers
pretty: single return path in %(trailers) handling
pretty: allow %(trailers) options with explicit value
doc: group pretty-format.txt placeholders descriptions
|
|
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
|
|
By default trailer lines are terminated by linebreaks ('\n'). By
specifying the new 'separator' option they will instead be separated by
user provided string and have separator semantics rather than terminator
semantics. The separator string can contain the literal formatting codes
%n and %xNN allowing it to be things that are otherwise hard to type
such as %x00, or comma and end-parenthesis which would break parsing.
E.g:
$ git log --pretty='%(trailers:key=Reviewed-by,valueonly,separator=%x00)'
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expanding '%n' and '%xNN' is generic functionality, so extract that from
the pretty.c formatter into a callback that can be reused.
No functional change intended
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the new "key=" option to %(trailers) it often makes little sense to
show the key, as it by definition already is knows which trailer is
printed there. This new "valueonly" option makes it omit the key when
printing trailers.
E.g.:
$ git show -s --pretty='%s%n%(trailers:key=Signed-off-by,valueonly)' aaaa88182
will show:
> upload-pack: fix broken if/else chain in config callback
> Jeff King <peff@peff.net>
> Junio C Hamano <gitster@pobox.com>
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adds a new "key=X" option to "%(trailers)" which will cause it to only
print trailer lines which match any of the specified keys.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No functional change intended.
This change may not seem useful on its own, but upcoming commits will do
memory allocation in there, and a single return path makes deallocation
easier.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to old %(trailers:only) it is now allowed to write
%(trailers:only=yes)
By itself this only gives (the not quite so useful) possibility to have
users change their mind in the middle of a formatting
string (%(trailers:only=true,only=false)). However, it gives users the
opportunity to override defaults from future options.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it possible to write for example
git log --format="%H,%S"
where the %S at the end is a new placeholder that prints out the ref
(tag/branch) for each commit.
Using %d might seem like an alternative but it only shows the ref for the last
commit in the branch.
Signed-off-by: Issac Trotts <issactrotts@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New "--pretty=format:" placeholders %GF and %GP that show the GPG
key fingerprints have been invented.
* mg/gpg-fingerprint:
gpg-interface.c: obtain primary key fingerprint as well
gpg-interface.c: support getting key fingerprint via %GF format
gpg-interface.c: use flags to determine key/signer info presence
|
|
Obtain the primary key fingerprint off VALIDSIG status message,
and expose it via %GP format.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support processing VALIDSIG status that provides additional information
for valid signatures. Use this information to propagate signing key
fingerprint and expose it via %GF pretty format. This format can be
used to build safer key verification systems that verify the key via
complete fingerprint rather than short/long identifier provided by %GK.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
|
|
In both of these cases we know that we are feeding the
trailer-parsing code a pure commit message. We should tell
it so, which avoids false positives for a commit message
that contains a "---" line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to use size_t/ssize_t when they are the right type.
* jk/size-t:
strbuf_humanise: use unsigned variables
pass st.st_size as hint for strbuf_readlink()
strbuf_readlink: use ssize_t
strbuf: use size_t for length in intermediate variables
reencode_string: use size_t for string lengths
reencode_string: use st_add/st_mult helpers
|
|
lookup_commit_reference() and friends have been updated to find
in-core object for a specific in-core repository instance.
* sb/object-store-lookup: (32 commits)
commit.c: allow lookup_commit_reference to handle arbitrary repositories
commit.c: allow lookup_commit_reference_gently to handle arbitrary repositories
tag.c: allow deref_tag to handle arbitrary repositories
object.c: allow parse_object to handle arbitrary repositories
object.c: allow parse_object_buffer to handle arbitrary repositories
commit.c: allow get_cached_commit_buffer to handle arbitrary repositories
commit.c: allow set_commit_buffer to handle arbitrary repositories
commit.c: migrate the commit buffer to the parsed object store
commit-slabs: remove realloc counter outside of slab struct
commit.c: allow parse_commit_buffer to handle arbitrary repositories
tag: allow parse_tag_buffer to handle arbitrary repositories
tag: allow lookup_tag to handle arbitrary repositories
commit: allow lookup_commit to handle arbitrary repositories
tree: allow lookup_tree to handle arbitrary repositories
blob: allow lookup_blob to handle arbitrary repositories
object: allow lookup_object to handle arbitrary repositories
object: allow object_as_type to handle arbitrary repositories
tag: add repository argument to deref_tag
tag: add repository argument to parse_tag_buffer
tag: add repository argument to lookup_tag
...
|
|
The iconv interface takes a size_t, which is the appropriate
type for an in-memory buffer. But our reencode_string_*
functions use integers, meaning we may get confusing results
when the sizes exceed INT_MAX. Let's use size_t
consistently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
ZheNing Hu
Junio C Hamano
René Scharfe
Hariom Verma
Jeff King
Ævar Arnfjörð Bjarmason
Emma Brooks
Hans Jerry Illikainen
Denton Liu
Prarit Bhargava
Nguyễn Thái Ngọc Duy
Anders Waldenborg
Issac Trotts
Stefan Beller
Michał Górny