summaryrefslogtreecommitdiff
path: root/perl
AgeCommit message (Collapse)AuthorFilesLines
2016-02-05Merge branch 'ew/svn-1.9.0-auth' into maintLibravatar Junio C Hamano1-2/+6
* ew/svn-1.9.0-auth: git-svn: fix auth parameter handling on SVN 1.9.0+
2016-01-26git-svn: fix auth parameter handling on SVN 1.9.0+Libravatar Eric Wong1-2/+6
For users with "store-passwords = no" set in the "[auth]" section of their ~/.subversion/config, SVN 1.9.0+ would fail with the following message when attempting to call svn_auth_set_parameter: Value is not a string (or undef) at Git/SVN/Ra.pm Ironically, this breakage was caused by r1553823 in subversion: "Make svn_auth_set_parameter() usable from Perl bindings." Since 2007 (602015e0e6ec), git-svn has used a workaround to make svn_auth_set_parameter usable internally. However this workaround breaks under SVN 1.9+, which deals properly with the type mapping and fails to recognize our workaround. For pre-1.9.0 SVN, we continue to use the existing workaround for the lack of proper type mapping in the bindings. Tested under subversion 1.6.17 and 1.9.3. I've also verified r1553823 was not backported to SVN 1.8.x: BRANCH=http://svn.apache.org/repos/asf/subversion/branches/1.8.x svn log -v $BRANCH/subversion/bindings/swig/core.i ref: https://bugs.debian.org/797705 Cc: 797705@bugs.debian.org Reported-by: Thierry Vignaud <thierry.vignaud@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Tested-by: Thierry Vignaud <thierry.vignaud@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-10git-svn: improve rebase/mkdirs performanceLibravatar Dair Grant1-8/+76
Processing empty_dir directives becomes extremely slow for svn repositories with a large enough history. This is due to using a single hash to store the list of empty directories, with the expensive step being purging items from that hash using grep+delete. Storing directories in a hash of hashes improves the performance of this purge step and removes a potentially lengthy delay after every rebase/mkdirs command. The svn repository with this behaviour has 110K commits with unhandled.log containing 170K empty_dir directives. This takes 10 minutes to process when using a single hash, vs 3 seconds with a hash of hashes. Signed-off-by: Dair Grant <dair@feralinteractive.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2015-07-07send-email: reduce dependencies impact on parse_address_lineLibravatar Remi Lespinet1-0/+67
parse_address_line had not the same behavior whether the user had Mail::Address or not. Teach parse_address_line to behave like Mail::Address. When the user input is correct, this implementation behaves exactly like Mail::Address except when there are quotes inside the name: "Jane Do"e <jdoe@example.com> In this case the result of parse_address_line is: With M::A : "Jane Do" e <jdoe@example.com> Without : "Jane Do e" <jdoe@example.com> When the user input is not correct, the behavior is also mostly the same. Unlike Mail::Address, this doesn't parse groups and recursive commentaries. Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-26Merge branch 'svn-maint-fixes' into svn-fixesLibravatar Junio C Hamano3-1/+13
* svn-maint-fixes: Git::SVN::*: avoid premature FileHandle closure git-svn: fix localtime=true on non-glibc environments
2015-02-26Git::SVN::*: avoid premature FileHandle closureLibravatar Kyle J. McKay2-0/+11
Since b19138b (git-svn: Make it incrementally faster by minimizing temp files, v1.6.0), git-svn has been using the Git.pm temp_acquire and temp_release mechanism to avoid unnecessary temp file churn and provide a speed boost. However, that change introduced a call to temp_acquire inside the Git::SVN::Fetcher::close_file function for an 'svn_hash' temp file. Because an SVN::Pool is active at the time this function is called, if the Git::temp_acquire function ends up actually creating a new FileHandle for the temp file (which it will the first time it's called with the name 'svn_hash') that FileHandle will end up in the SVN::Pool and should that pool have SVN::Pool::clear called on it that FileHandle will be closed out from under Git::temp_acquire. Since the only call site to Git::temp_acquire with the name 'svn_hash' is inside the close_file function, if an 'svn_hash' temp file is ever created its FileHandle is guaranteed to be created in the active SVN::Pool. This has not been a problem in the past because the SVN::Pool was not being cleared. However, since dfa72fdb (git-svn: reload RA every log-window-size, v2.2.0) the pool has been getting cleared periodically at which point the FileHandle for the 'svn_hash' temp file gets closed. Any subsequent calls to Git::temp_acquire for 'svn_hash', however, succeed without creating/opening a new temporary file since it still has the now invalid FileHandle in its cache. Callers that then attempt to use that FileHandle fail with an error. We avoid this problem by making sure the 'svn_hash' temp file is created in the same place the 'svn_delta_...' and 'git_blob_...' temp files are (and then temp_release'd) so that it can be safely used inside the close_file function without having its FileHandle end up in an SVN::Pool that gets cleared. Additionally the Git.pm cat_blob function creates a bidirectional pipe FileHandle using the IPC::Open2::open2 function. If that handle is created too late, it also gets caught up in the SVN::Pool and incorrectly closed by the SVN::Pool::clear call. But this only seems to happen with more recent versions of Perl and svn. To avoid this problem we add an explicit call to _open_cat_blob_if_needed before the first call to SVN::Pool->new_default to make sure the open2 handle does not end up in the SVN::Pool. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-26git-svn: fix localtime=true on non-glibc environmentsLibravatar Ryuichi Kokubo1-1/+2
git svn uses POSIX::strftime('%s', $sec, $min, ...) to make unix epoch time. But lowercase %s formatting character is a GNU extention. This causes problem in git svn fetch --localtime on non-glibc systems, such as msys or cygwin. Using Time::Local::timelocal($sec, $min, ...) fixes it. Signed-off-by: Ryuichi Kokubo <ryu1kkb@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Notes: lowercase %s format character in strftime is a GNU extension and not widely supported. POSIX::strftime affected by underlying crt's strftime because POSIX::strftime just calls crt's one. Time::Local is good function to replace POSIX::strftime because it's a perl core module function. Document about Time::Local. http://perldoc.perl.org/Time/Local.html These are specifications of strftime. The GNU C Library Reference Manual. http://www.gnu.org/software/libc/manual/html_node/Formatting-Calendar-Time.html perl POSIX module's strftime document. It does not have '%s'. http://perldoc.perl.org/POSIX.html strftime document of Microsort Windows C Run-Time library. https://msdn.microsoft.com/en-us/library/fe06s4ak.aspx The Open Group's old specification does not have '%s' too. http://pubs.opengroup.org/onlinepubs/007908799/xsh/strftime.html On my environment, following problems happened. - msys : git svn fetch does not progress at all with perl.exe consuming CPU. - cygwin : git svn fetch progresses but time stamp information is dropped. Every commits have unix epoch timestamp. I would like to thank git developer and contibutors. git helps me so much everyday. Thank you. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-26git-svn: lazy load some modulesLibravatar Eric Wong4-14/+19
We can delay loading some modules until we need them for uncommon code paths. For example, persistent memoization is not often needed, so we can avoid loading the modules for it until we encounter svn::mergeinfo during fetch. This gives a tiny reduction in syscalls (from 15641 to 15305) when running "git svn info" and counting via "strace -fc". Further, more invasive work will be needed to noticeably improve performance. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2015-02-18Git.pm: two minor typo fixesLibravatar Alexander Kuleshov1-2/+2
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-15Git::SVN: handle missing ref_id case correctlyLibravatar Ramkumar Ramachandra1-1/+1
ref_id should not match "refs/remotes/". [ew: dropped initial hunk for GIT_SVN_ID at Ramkumar's request] Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-12-09git-svn: support for git-svn propsetLibravatar Alfred Perlstein1-0/+38
This change allows git-svn to support setting subversion properties. It is useful for manually setting properties when committing to a subversion repo that *requires* properties to be set without requiring moving your changeset to separate subversion checkout in order to set props. This change is initially from David Fraser, appearing at: http://mid.gmane.org/1927112650.1281253084529659.JavaMail.root@klofta.sjsoft.com> They are now forward-ported to most recent git along with fixes to deal with files in subdirectories. Style and functional changes from Eric Wong have been taken in their entirety from: http://mid.gmane.org/20141201094911.GA13931@dcvr.yhbt.net There is a nit to point out: the code does not support adding props unless there are also content changes to the files as well. This is demonstrated in the testcase. [ew - simplify Git.pm usage for check-attr - improve shell portability for tests - minor phrasing changes in commit message] Signed-off-by: David Fraser <davidf@sjsoft.com> Signed-off-by: Alfred Perlstein <alfred@freebsd.org> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-31git-svn: use SVN::Ra::get_dir2 when possibleLibravatar Eric Wong1-1/+11
This avoids the following failure with normal "get_dir" on newer versions of SVN (tested with SVN 1.8.8-1ubuntu3.1): Incorrect parameters given: Could not convert '%ld' into a number get_dir2 also has the potential to be more efficient by requesting less data. ref: <1414636504.45506.YahooMailBasic@web172304.mail.ir2.yahoo.com> ref: <1414722617.89476.YahooMailBasic@web172305.mail.ir2.yahoo.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
2014-10-30git-svn: add space after "W:" prefix in warningLibravatar Eric Wong1-4/+2
And minor reformatting while we're in the area. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-30git-svn: (cleanup) remove editor param passingLibravatar Eric Wong1-6/+4
Neither find_extra_svk_parents or find_extra_svn_parents ever used the `$ed' parameter. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-29git-svn: prepare SVN::Ra config pieces onceLibravatar Eric Wong1-27/+36
Memoizing these initialization functions saves some memory for long fetches which require scanning many unwanted revisions before any wanted revisions happen. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-29Git.pm: add specified name to tempfile templateLibravatar Eric Wong1-1/+4
This should help me track down errors in git-svn more easily: write .git/Git_XXXXXX: Bad file descriptor at /usr/lib/perl5/SVN/Ra.pm line 623 Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-27git-svn: disable _rev_list memoizationLibravatar Eric Wong1-10/+0
This memoization appears unneeded as the check_cherry_pick2 cache is in front of it does enough. With this change applied, importing from local svn+ssh and http copies of the R repo[1] takes only 2:00 (2 hours) on my system and the git-svn process never uses more than 60MB RSS on my x86-64 GNU/Linux system[2]. This 60M measurement is only for the git-svn Perl process itself and does not include memory used by git subprocesses accessing large packs (subprocess memory usage _is_ measured by my time(1) tool). Before this change, an import took longer (2:20) on svn+ssh:// but git-svn used around 240MB during the imports. Worse yet, git-svn ballooned to over 400M when writing out the cache to the filesystem. I also tried removing memoization for `has_no_changes', too, but a local copy of the R repository(*) was not close to finishing within 10 hours on my system. [1] http://svn.r-project.org/R [2] file:// repos causes libsvn to use more memory internally Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
2014-10-25git-svn: save a little memory as fetch progressesLibravatar Eric Wong1-1/+1
There is no reason to keep entries in the %revs hash after we're done processing a revision, so allow entries become freed as processing continues. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-25git-svn: remove unnecessary DESTROY overrideLibravatar Eric Wong1-4/+0
This override was probably never necessary, but most likely a no-op as it does not appear to do anything in SVN::Ra itself. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-24git-svn: reload RA every log-window-sizeLibravatar Eric Wong1-8/+13
Despite attempting to use local memory pools everywhere we can, (including our call to SVN::Ra::do_update and all subsequent reporter calls), there does not appear to be a way to force the Git::SVN::Fetcher callbacks to use a pool other than the per-SVN::Ra pool. Git::SVN::Fetcher ends up using the main RA pool which grows monotonically in size for the lifetime of the RA object. Thus the only way to free that memory appears to be to destroy and recreate the RA connection for at every --log-window-size interval. This reduces memory usage over the course of fetching 10K revisions using a test repository created with the script at the end of this commit message. As reported by time(1) on my x86-64 system: before: 54024k after: 28680k Unfortunately, there remains some yet-to-be-tracked-down slow memory growth which would be evident as the `nr' parameter increases in the repository generation script: -----------------------------8<------------------------------ set -e tmp=$(mktemp -d svntestrepo-XXXXXXXX) svnadmin create "$tmp" repo=file://"$(cd $tmp && pwd)" svn co "$repo" "$tmp/wd" cd "$tmp/wd" if ! test -f a then > a svn add a svn commit -m 'A' fi nr=10000 while test $nr -gt 0 do echo $nr > a svn commit -q -m A nr=$((nr - 1)) done echo "repository created in $repo" -----------------------------8<------------------------------ Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-24git-svn: remove mergeinfo rev cachingLibravatar Eric Wong1-21/+9
This should further reduce memory usage from the new mergeinfo speedups without hurting performance too much, assuming reasonable latency to the SVN server. Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Suggested-by: Jakob Stoklund Olesen <stoklund@2pi.dk> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-24git-svn: cache only mergeinfo revisionsLibravatar Eric Wong1-14/+8
This should reduce excessive memory usage from the new mergeinfo caches without hurting performance too much, assuming reasonable latency to the SVN server. Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Suggested-by: Jakob Stoklund Olesen <stoklund@2pi.dk> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-24git-svn: reduce check_cherry_pick cache overheadLibravatar Eric Wong1-13/+15
We do not need to store entire lists of commits, only the number of incomplete and the first commit for reference. This reduces the amount of data we need to store in memory and on disk stores. Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-24git-svn: only look at the root path for svn:mergeinfoLibravatar Jakob Stoklund Olesen1-16/+13
Subversion can put mergeinfo on any sub-directory to track cherry-picks. Since cherry-picks are not represented explicitly in git, git-svn should just ignore it. Signed-off-by: Jakob Stoklund Olesen <stoklund@2pi.dk> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-10-24git-svn: only look at the new parts of svn:mergeinfoLibravatar Jakob Stoklund Olesen1-12/+72
In a Subversion repository where many feature branches are merged into a trunk, the svn:mergeinfo property can grow very large. This severely slows down git-svn's make_log_entry() because it is checking all mergeinfo entries every time the property changes. In most cases, the additions to svn:mergeinfo since the last commit are pretty small, and there is nothing to gain by checking merges that were already checked for the last commit in the branch. Add a mergeinfo_changes() function which computes the set of interesting changes to svn:mergeinfo since the last commit. Filter out merged branches whose ranges haven't changed, and remove a common prefix of ranges from other merged branches. This speeds up "git svn fetch" by several orders of magnitude on a large repository where thousands of feature branches have been merged. Signed-off-by: Jakob Stoklund Olesen <stoklund@2pi.dk> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-06-06Merge branch 'mm/pager-less-sans-S'Libravatar Junio C Hamano1-1/+1
Since the very beginning of Git, we gave the LESS environment a default value "FRSX" when we spawn "less" as the pager. "S" (chop long lines instead of wrapping) has been removed from this default set of options, because it is more or less a personal taste thing, as opposed to others that have good justifications (i.e. "R" is very much justified because many kinds of output we produce are colored and "FX" is justified because output we produce is often shorter than a page). Existing users who prefer not to see line-wrapped output may want to set $ git config core.pager "less -S" to restore the traditional behaviour. It is expected that people find output from the most subcommands easier to read with the new default, except for "blame" which tends to produce really long lines. To override the new default only for "git blame", you can do this: $ git config pager.blame "less -S" * mm/pager-less-sans-S: pager: remove 'S' from $LESS by default
2014-05-07pager: remove 'S' from $LESS by defaultLibravatar Matthieu Moy1-1/+1
By default, Git used to set $LESS to -FRSX if $LESS was not set by the user. The FRX flags actually make sense for Git (F and X because sometimes the output Git pipes to less is short, and R because Git pipes colored output). The S flag (chop long lines), on the other hand, is not related to Git and is a matter of user preference. Git should not decide for the user to change LESS's default. More specifically, the S flag harms users who review untrusted code within a pager, since a patch looking like: -old code; +new good code; [... lots of tabs ...] malicious code; would appear identical to: -old code; +new good code; Users who prefer the old behavior can still set the $LESS environment variable to -FRSX explicitly, or set core.pager to 'less -S'. The documentation in config.txt is made a bit longer to keep both an example setting the 'S' flag (needed to recover the old behavior) and an example showing how to unset a flag set by Git. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-17SVN.pm::parse_svn_date: allow timestamps with a single-digit hourLibravatar RomanBelinsky1-1/+1
Some broken subversion server gives timestamps with only one digit in the hour part, like this: 2014-01-07T5:01:02.048176Z Loosen the regexp that expected to see two-digit hour, minute and second parts to accept a single-digit hour (but not minute or second). Signed-off-by: Stepan Kasal <kasal@ucw.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31code and test: fix misuses of "nor"Libravatar Justin Lebar1-2/+2
Signed-off-by: Justin Lebar <jlebar@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31comments: fix misuses of "nor"Libravatar Justin Lebar2-2/+2
Signed-off-by: Justin Lebar <jlebar@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-23git-svn: memoize _rev_list and rebuildLibravatar lin zuojian1-3/+38
According to profile data, _rev_list and rebuild consume a large portion of time. Memoize the results of _rev_list and memoize rebuild internals to avoid subprocess invocation. When importing 15152 revisions on a LAN, time improved from 10 hours to 3-4 hours. Signed-off-by: lin zuojian <manjian2006@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-01-13Merge branch 'jn/pager-lv-default-env'Libravatar Junio C Hamano1-0/+1
Just like we give a reasonable default for "less" via the LESS environment variable, specify a reasonable default for "lv" via the "LV" environment variable when spawning the pager. * jn/pager-lv-default-env: pager: set LV=-c alongside LESS=FRSX
2014-01-07pager: set LV=-c alongside LESS=FRSXLibravatar Jonathan Nieder1-0/+1
On systems with lv configured as the preferred pager (i.e., DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the environment) git commands that use color show control codes instead of color in the pager: $ git diff ^[[1mdiff --git a/.mailfilter b/.mailfilter^[[m ^[[1mindex aa4f0b2..17e113e 100644^[[m ^[[1m--- a/.mailfilter^[[m ^[[1m+++ b/.mailfilter^[[m ^[[36m@@ -1,11 +1,58 @@^[[m "less" avoids this problem because git uses the LESS environment variable to pass the -R option ('output ANSI color escapes in raw form') by default. Use the LV environment variable to pass 'lv' the -c option ('allow ANSI escape sequences for text decoration / color') to fix it for lv, too. Noticed when the default value for color.ui flipped to 'auto' in v1.8.4-rc0~36^2~1 (2013-06-10). Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-27git-svn: workaround for a bug in svn serf backendLibravatar Roman Kagan1-2/+8
Subversion serf backend in versions 1.8.5 and below has a bug(*) that the function creating the descriptor of a file change -- add_file() -- doesn't make a copy of its third argument when storing it on the returned descriptor. As a result, by the time this field is used (in transactions of file copying or renaming) it may well be released, and the memory reused. One of its possible manifestations is the svn assertion triggering on an invalid path, with a message svn_fspath__skip_ancestor: Assertion `svn_fspath__is_canonical(child_fspath)' failed. This patch works around this bug, by storing the value to be passed as the third argument to add_file() in a local variable with the same scope as the file change descriptor, making sure their lifetime is the same. * [ew: fixed in Subversion r1553376 as noted by Jonathan Nieder] Cc: Benjamin Pabst <benjamin.pabst85@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Roman Kagan <rkagan@mail.ru>
2013-09-06git-svn: fix termination issues for remote svn connectionsLibravatar Uli Heller1-0/+8
git-svn used in combination with serf to talk to svn repository served over HTTPS dumps core on termination. This is caused by a bug in serf, and the most recent serf release 1.3.1 still exhibits the problem; a fix for the bug exists (see https://code.google.com/p/serf/source/detail?r=2146). Until the bug is fixed, work around the issue within the git perl module Ra.pm by freeing the private copy of the remote access object on termination, which seems to be sufficient to prevent the error from happening. Note: Since subversion-1.8.0 and later do require serf-1.2.1 or later, this issue typically shows up when upgrading to a recent version of subversion. Credits go to Jonathan Lambrechts for proposing a fix to Ra.pm, Evgeny Kotkov and Ivan Zhakov for fixing the issue in serf and pointing me to that fix. Signed-off-by: Uli Heller <uli.heller@daemons-point.com> Tested-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-18Git.pm: revert _temp_cache use of temp_is_lockedLibravatar Kyle J. McKay1-1/+1
When the temp_is_locked function was introduced, there was a desire to make _temp_cache use it. Unfortunately due to the various tests and logic flow involved changing the _temp_cache function to use the new temp_is_locked function is problematic as _temp_cache needs a slightly different test than is provided by the temp_is_locked function. This change reverts use of temp_is_locked in the _temp_cache function and restores the original code that existed there before the temp_is_locked function was added. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-07git-svn: allow git-svn fetching to work using serfLibravatar Kyle J. McKay1-2/+4
When attempting to git-svn fetch files from an svn https?: url using the serf library (the only choice starting with svn 1.8) the following errors can occur: Temp file with moniker 'svn_delta' already in use at Git.pm line 1250 Temp file with moniker 'git_blob' already in use at Git.pm line 1250 David Rothenberger <daveroth@acm.org> has determined the cause to be that ra_serf does not drive the delta editor in a depth-first manner [...]. Instead, the calls come in this order: 1. open_root 2. open_directory 3. add_file 4. apply_textdelta 5. add_file 6. apply_textdelta When using the ra_serf access method, git-svn can end up needing to create several temp files before the first one is closed. This change causes a new temp file moniker to be generated if the one that would otherwise have been used is currently locked. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-07Git.pm: add new temp_is_locked functionLibravatar Kyle J. McKay1-2/+31
The temp_is_locked function can be used to determine whether or not a given name previously passed to temp_acquire is currently locked. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-09git-svn: added an --include-path flagLibravatar Paul Walmsley1-2/+14
The SVN::Fetcher module is now able to filter for inclusion as well as exclusion (as used by --ignore-path). Also added tests, documentation changes and git completion script. If you have an SVN repository with many top level directories and you only want a git-svn clone of some of them then using --ignore-path is difficult as it requires a very long regexp. In this case it's much easier to filter for inclusion. [ew: remove trailing whitespace] Signed-off-by: Paul Walmsley <pjwhams@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-05-09Git::SVN::*: add missing "NAME" section to perldocLibravatar Jonathan Nieder4-0/+8
lexgrog(1) relies on the NAME section to find a manpage's subject's name and description for easy access later using "man -k". Add the section it expects. Noticed using lintian. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-05-01Merge branch 'hb/git-pm-tempfile'Libravatar Junio C Hamano1-1/+1
* hb/git-pm-tempfile: Git.pm: call tempfile from File::Temp as a regular function
2013-04-29Git.pm: call tempfile from File::Temp as a regular functionLibravatar H. Merijn Brand1-1/+1
We call File::Temp's "tempfile" function as a class method, but it was never designed to be called this way. Older versions seemed to tolerate it, but as of File::Temp 0.23, it blows up like this: $ git svn fetch 'tempfile' can't be called as a method at .../Git.pm line 1117. Fix it by calling it as a regular function, just inside the File::Temp namespace. Signed-off-by: H. Merijn Brand <h.m.brand@xs4all.nl> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15Merge branch 'tr/perl-keep-stderr-open'Libravatar Junio C Hamano1-3/+3
Closing (not redirecting to /dev/null) the standard error stream is not a very smart thing to do. Later open may return file descriptor #2 for unrelated purpose, and error reporting code may write into them. * tr/perl-keep-stderr-open: t9700: do not close STDERR perl: redirect stderr to /dev/null instead of closing
2013-04-12Sync with 'maint'Libravatar Junio C Hamano3-3/+3
* maint: Correct common spelling mistakes in comments and tests kwset: fix spelling in comments precompose-utf8: fix spelling of "want" in error message compat/nedmalloc: fix spelling in comments compat/regex: fix spelling and grammar in comments obstack: fix spelling of similar contrib/subtree: fix spelling of accidentally git-remote-mediawiki: spelling fixes doc: various spelling fixes fast-export: fix argument name in error messages Documentation: distinguish between ref and offset deltas in pack-format i18n: make the translation of -u advice in one go
2013-04-12Correct common spelling mistakes in comments and testsLibravatar Stefano Lattarini3-3/+3
Most of these were found using Lucas De Marchi's codespell tool. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-11Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: Typo fix: replacing it's -> its t: make PIPE a standard test prerequisite archive: clarify explanation of --worktree-attributes t/README: --immediate skips cleanup commands for failed tests
2013-04-11Typo fix: replacing it's -> itsLibravatar Benoit Bourbie1-2/+2
Signed-off-by: Benoit Bourbie <benoit.bourbie@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-04perl: redirect stderr to /dev/null instead of closingLibravatar Thomas Rast1-3/+3
On my system, t9100.1 triggers the following warning: ==352== Syscall param write(buf) points to uninitialised byte(s) ==352== at 0x57119C0: __write_nocancel (in /lib64/libc-2.17.so) ==352== by 0x56AC1D2: _IO_file_write@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x56AC0B1: new_do_write (in /lib64/libc-2.17.so) ==352== by 0x56AD3B4: _IO_do_write@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x56AD6FE: _IO_file_overflow@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x56AE3D8: _IO_default_xsputn (in /lib64/libc-2.17.so) ==352== by 0x56ACAA2: _IO_file_xsputn@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x5682133: buffered_vfprintf (in /lib64/libc-2.17.so) ==352== by 0x567CE9D: vfprintf (in /lib64/libc-2.17.so) ==352== by 0x5687096: fprintf (in /lib64/libc-2.17.so) ==352== by 0x4E7AC5: vreportf (usage.c:15) ==352== by 0x4E7B14: die_builtin (usage.c:38) The actual complaint appears to be a bug in the underlying implementation. What's interesting here is that it is apparently _triggered_ by closing stderr, which results in (from strace) write(2, "fatal: Needed a single revision\n", 32) = -1 EBADF (Bad file descriptor) write(2, "\0", 1) = -1 EBADF (Bad file descriptor) Closing stderr is a bad idea anyway: there is a very real chance that we print fatal error messages to some other file that just happens to be opened on the now-free FD 2. So let's not do that. As pointed out by Eric Wong (thanks), the initial close needs to go: die() would again write nowhere if we close STDERR beforehand. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-27git-svn: Support custom tunnel schemes instead of SSH onlyLibravatar Sebastian Schuberth1-1/+1
This originates from an msysgit pull request, see: https://github.com/msysgit/git/pull/58 Signed-off-by: Eric Wieser <wieser.eric@gmail.com> Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-03-26Merge branch 'jc/perl-cat-blob' into maintLibravatar Junio C Hamano1-10/+7
perl/Git.pm::cat_blob slurped everything in core only to write it out to a file descriptor, which was not a very smart thing to do. * jc/perl-cat-blob: Git.pm: fix cat_blob crashes on large files