| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
DESTDIR is supposed to be overridden on 'make install' after doing
'make'. Have the automatically generated perl/perl.mak not cache the
value of DESTDIR to support that for the perl/ subdirectory also.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
MakeMaker supports three installation modes: perl, site, and vendor. The first
and third install manpages to $PREFIX/share/man, only site installs to
$PREFIX/man. For consistency with the rest of git, which does not make the
distinction and writes all manpages to $PREFIX/share/man, this change makes
sure that perl does too, even when it's installed in site mode.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
bdash (on IRC) had a problem with Git.pm (via git-svn) when his
site installation of Error.pm was older than the version we
package.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
From time to time, I would get this error:
[...]
sed: -e expression #8, char 41: Unterminated `s' command
make: *** [git-add--interactive] Error 1
Turns out that the function WriteMakefile() called in Makefile.PL
outputs the message "Writing perl.mak for Git" to stdout! Thus,
the output of "make -C perl -s --no-print-directory instlibdir"
would be prefixed by that message whenever Makefile.PL was newer
than perl.mak.
This is fixed by redirecting stdout to stderr in Makefile.PL.
Signed-off-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
An earlier commit f848718a broke the build in perl/ directory by
allowing the Makefile.PL to overwrite the now-tracked Makefile.
Fix this by forcing Makefile.PL to produce its output in
perl.mak as the broken commit originally intended.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch removes Git.xs from the repository for the time being. This
should hopefully enable Git.pm to finally make its way to master.
Git.xs is not going away forever. When the Git libification makes some
progress, it will hopefully return (but most likely as an optional
component, due to the portability woes) since the performance boosts are
really important for applications like Gitweb or Cogito. It needs to go
away now since it is not really reliable in case you use it for several
repositories in the scope of a single process, and that is not possible
to fix without some either very ugly or very intrusive core changes.
Rest in peace. (While you can.)
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Makes life for binary packagers easier, as the Perl modules will
be installed inside DESTDIR.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes us not include ppport.h which seems not to give us anything
real anyway; it is useful for checking for portability warts but since
Devel::PPPort is a portability wart itself, we shouldn't require it
for build. You can check for portability problems by calling make check
in perl/.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The syntax for 'require' was wrong, and it was always failing, which
resulted in installing our own version of Error.pm anyways.
Now we used to ship our own Error.pm in the same directory, so after
fixing the syntax, 'require' always succeeds, but it does not test if
the platform has Error.pm module installed anymore. So rename the
source we ship to private-Error.pm, and install that as Error.pm when
the platform does not have one already.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
FC4 uses gnumake 3.80 whose annoying "Entering directory..."
messages are not silenced with -s alone.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- We passed our own *.a archives as LIBS to the submake that runs
in perl/; separate LIBS and EXTLIBS and pass the latter which
tells what the system libraries are used.
- The quoting of preprocesor symbol definitions passed down to
perl/ submake was loose and we lost double quotes around
include directives. Use *_SQ to quote them properly.
- The installation location of perl/ submake is not
architecture neutral anymore, so use SITEARCH instead of
SITELIB.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I have been thinking about how to do the error reporting the best
way and after scraping various overcomplicated concepts, I have
decided that by far the most elegant way is to throw Error exceptions;
the closest sane alternative is to catch the dies in Git.pm by
enclosing the calls in eval{}s and that's really _quite_ ugly.
The only "small" trouble is that Error.pm turns out sadly not to be
part of the standard distribution, and installation from CPAN is
a bother, especially if you can't install it system-wide. But since
it is very small, I've decided to just bundle it.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch introduces a very basic and barebone Git.pm module
with a sketch of how the generic interface would look like;
most functions are missing, but this should give some good base.
I will continue expanding it.
Most desirable now is more careful error reporting, generic_in() for feeding
input to Git commands and the repository() constructor doing some poking
with git-rev-parse to get the git directory and subdirectory prefix.
Those three are basically the prerequisities for converting git-mv.
I will send them as follow-ups to this patch.
Currently Git.pm just wraps up exec()s of Git commands, but even that
is not trivial to get right and various Git perl scripts do it in
various inconsistent ways. In addition to Git.pm, there is now also
Git.xs which provides barebone Git.xs for directly interfacing with
libgit.a, and as an example providing the hash_object() function using
libgit.
This adds the Git module, integrates it to the build system and as
an example converts the git-fmt-merge-msg.perl script to it (the result
is not very impressive since its advantage is not quite apparent in this
one, but I just picked up the simplest Git user around).
Compared to v3, only very minor things were fixed in this patch (some
whitespaces, a missing export, tiny bug in git-fmt-merge-msg.perl);
at first I wanted to post them as a separate patch but since this
is still only in pu, I decided that it will be cleaner to just resend
the patch.
My current working state is available all the time at
http://pasky.or.cz/~xpasky/git-perl/Git.pm
and an irregularily updated API documentation is at
http://pasky.or.cz/~xpasky/git-perl/Git.html
Many thanks to Jakub Narebski, Junio and others for their feedback.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Gerrit Pape
martin f. krafft
Eric Wong
Johannes Schindelin
Junio C Hamano
Petr Baudis
Pavel Roskin