summaryrefslogtreecommitdiff
path: root/perl/Git.pm
AgeCommit message (Collapse)AuthorFilesLines
2016-12-27Merge branch 'va/i18n-perl-scripts'Libravatar Junio C Hamano1-0/+38
Porcelain scripts written in Perl are getting internationalized. * va/i18n-perl-scripts: i18n: difftool: mark warnings for translation i18n: send-email: mark composing message for translation i18n: send-email: mark string with interpolation for translation i18n: send-email: mark warnings and errors for translation i18n: send-email: mark strings for translation i18n: add--interactive: mark status words for translation i18n: add--interactive: remove %patch_modes entries i18n: add--interactive: mark edit_hunk_manually message for translation i18n: add--interactive: i18n of help_patch_cmd i18n: add--interactive: mark patch prompt for translation i18n: add--interactive: mark plural strings i18n: clean.c: match string with git-add--interactive.perl i18n: add--interactive: mark strings with interpolation for translation i18n: add--interactive: mark simple here-documents for translation i18n: add--interactive: mark strings for translation Git.pm: add subroutines for commenting lines
2016-12-14Git.pm: add subroutines for commenting linesLibravatar Vasco Almeida1-0/+38
Add subroutines prefix_lines and comment_lines. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-27Merge branch 'svn-wt' of git://bogomips.org/git-svnLibravatar Junio C Hamano1-1/+15
* 'svn-wt' of git://bogomips.org/git-svn: git-svn: "git worktree" awareness git-svn: reduce scope of input record separator change
2016-10-26Merge branch 'mm/send-email-cc-cruft-after-address'Libravatar Junio C Hamano1-6/+9
"git send-email" attempts to pick up valid e-mails from the trailers, but people in real world write non-addresses there, like "Cc: Stable <add@re.ss> # 4.8+", which broke the output depending on the availability and vintage of Mail::Address perl module. * mm/send-email-cc-cruft-after-address: Git.pm: add comment pointing to t9000 t9000-addresses: update expected results after fix parse_mailboxes: accept extra text after <...> address
2016-10-21Git.pm: add comment pointing to t9000Libravatar Matthieu Moy1-0/+2
parse_mailboxes should probably eventually be completely equivalent to Mail::Address, and if this happens we can drop the Mail::Address dependency. Add a comment in the code reminding the current state of the code, and point to the corresponding failing test to help future contributors to get it right. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-14parse_mailboxes: accept extra text after <...> addressLibravatar Matthieu Moy1-6/+7
The test introduced in this commit succeeds without the patch to Git.pm if Mail::Address is installed, but fails otherwise because our in-house parser does not accept any text after the email address. They succeed both with and without Mail::Address after this commit. Mail::Address accepts extra text and considers it as part of the name, iff the address is surrounded with <...>. The implementation mimics this behavior as closely as possible. This mostly restores the behavior we had before b1c8a11 (send-email: allow multiple emails using --cc, --to and --bcc, 2015-06-30), but we keep the possibility to handle comma-separated lists. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-14git-svn: reduce scope of input record separator changeLibravatar Eric Wong1-1/+15
Reducing the scope of where we change the record separator ($/) avoids bugs in calls which rely on the input record separator further down, such as the 'chomp' usage in command_oneline. This is necessary for a future change to git-svn, but exists in Git.pm since it seems useful for gitweb and our other Perl scripts, too. Signed-off-by: Eric Wong <e@80x24.org>
2016-05-06typofix: assorted typofixes in comments, documentation and messagesLibravatar Li Peng1-1/+1
Many instances of duplicate words (e.g. "the the path") and a few typoes are fixed, originally in multiple patches. wildmatch: fix duplicate words of "the" t: fix duplicate words of "output" transport-helper: fix duplicate words of "read" Git.pm: fix duplicate words of "return" path: fix duplicate words of "look" pack-protocol.txt: fix duplicate words of "the" precompose-utf8: fix typo of "sequences" split-index: fix typo worktree.c: fix typo remote-ext: fix typo utf8: fix duplicate words of "the" git-cvsserver: fix duplicate words Signed-off-by: Li Peng <lip@dtdream.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-26Git.pm: stop assuming that absolute paths start with a slashLibravatar Johannes Schindelin1-1/+2
On Windows, absolute paths never start with a slash, unless a POSIX emulation layer is used. The latter is the case for MSYS2's Perl that Git for Windows leverages. However, in the tests we also go through plain `git.exe`, which does *not* leverage the POSIX emulation layer, and therefore the paths we pass to Perl may actually be DOS-style paths such as C:/Program Files/Git. So let's just use Perl's own way to test whether a given path is absolute or not instead of home-brewing our own. This patch partially fixes t7800 and t9700 when running in Git for Windows' SDK. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-07send-email: reduce dependencies impact on parse_address_lineLibravatar Remi Lespinet1-0/+67
parse_address_line had not the same behavior whether the user had Mail::Address or not. Teach parse_address_line to behave like Mail::Address. When the user input is correct, this implementation behaves exactly like Mail::Address except when there are quotes inside the name: "Jane Do"e <jdoe@example.com> In this case the result of parse_address_line is: With M::A : "Jane Do" e <jdoe@example.com> Without : "Jane Do e" <jdoe@example.com> When the user input is not correct, the behavior is also mostly the same. Unlike Mail::Address, this doesn't parse groups and recursive commentaries. Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-18Git.pm: two minor typo fixesLibravatar Alexander Kuleshov1-2/+2
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-29Git.pm: add specified name to tempfile templateLibravatar Eric Wong1-1/+4
This should help me track down errors in git-svn more easily: write .git/Git_XXXXXX: Bad file descriptor at /usr/lib/perl5/SVN/Ra.pm line 623 Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-07-18Git.pm: revert _temp_cache use of temp_is_lockedLibravatar Kyle J. McKay1-1/+1
When the temp_is_locked function was introduced, there was a desire to make _temp_cache use it. Unfortunately due to the various tests and logic flow involved changing the _temp_cache function to use the new temp_is_locked function is problematic as _temp_cache needs a slightly different test than is provided by the temp_is_locked function. This change reverts use of temp_is_locked in the _temp_cache function and restores the original code that existed there before the temp_is_locked function was added. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-07Git.pm: add new temp_is_locked functionLibravatar Kyle J. McKay1-2/+31
The temp_is_locked function can be used to determine whether or not a given name previously passed to temp_acquire is currently locked. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-01Merge branch 'hb/git-pm-tempfile'Libravatar Junio C Hamano1-1/+1
* hb/git-pm-tempfile: Git.pm: call tempfile from File::Temp as a regular function
2013-04-29Git.pm: call tempfile from File::Temp as a regular functionLibravatar H. Merijn Brand1-1/+1
We call File::Temp's "tempfile" function as a class method, but it was never designed to be called this way. Older versions seemed to tolerate it, but as of File::Temp 0.23, it blows up like this: $ git svn fetch 'tempfile' can't be called as a method at .../Git.pm line 1117. Fix it by calling it as a regular function, just inside the File::Temp namespace. Signed-off-by: H. Merijn Brand <h.m.brand@xs4all.nl> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15Merge branch 'tr/perl-keep-stderr-open'Libravatar Junio C Hamano1-3/+3
Closing (not redirecting to /dev/null) the standard error stream is not a very smart thing to do. Later open may return file descriptor #2 for unrelated purpose, and error reporting code may write into them. * tr/perl-keep-stderr-open: t9700: do not close STDERR perl: redirect stderr to /dev/null instead of closing
2013-04-12Sync with 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Correct common spelling mistakes in comments and tests kwset: fix spelling in comments precompose-utf8: fix spelling of "want" in error message compat/nedmalloc: fix spelling in comments compat/regex: fix spelling and grammar in comments obstack: fix spelling of similar contrib/subtree: fix spelling of accidentally git-remote-mediawiki: spelling fixes doc: various spelling fixes fast-export: fix argument name in error messages Documentation: distinguish between ref and offset deltas in pack-format i18n: make the translation of -u advice in one go
2013-04-12Correct common spelling mistakes in comments and testsLibravatar Stefano Lattarini1-1/+1
Most of these were found using Lucas De Marchi's codespell tool. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-04perl: redirect stderr to /dev/null instead of closingLibravatar Thomas Rast1-3/+3
On my system, t9100.1 triggers the following warning: ==352== Syscall param write(buf) points to uninitialised byte(s) ==352== at 0x57119C0: __write_nocancel (in /lib64/libc-2.17.so) ==352== by 0x56AC1D2: _IO_file_write@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x56AC0B1: new_do_write (in /lib64/libc-2.17.so) ==352== by 0x56AD3B4: _IO_do_write@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x56AD6FE: _IO_file_overflow@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x56AE3D8: _IO_default_xsputn (in /lib64/libc-2.17.so) ==352== by 0x56ACAA2: _IO_file_xsputn@@GLIBC_2.2.5 (in /lib64/libc-2.17.so) ==352== by 0x5682133: buffered_vfprintf (in /lib64/libc-2.17.so) ==352== by 0x567CE9D: vfprintf (in /lib64/libc-2.17.so) ==352== by 0x5687096: fprintf (in /lib64/libc-2.17.so) ==352== by 0x4E7AC5: vreportf (usage.c:15) ==352== by 0x4E7B14: die_builtin (usage.c:38) The actual complaint appears to be a bug in the underlying implementation. What's interesting here is that it is apparently _triggered_ by closing stderr, which results in (from strace) write(2, "fatal: Needed a single revision\n", 32) = -1 EBADF (Bad file descriptor) write(2, "\0", 1) = -1 EBADF (Bad file descriptor) Closing stderr is a bad idea anyway: there is a very real chance that we print fatal error messages to some other file that just happens to be opened on the now-free FD 2. So let's not do that. As pointed out by Eric Wong (thanks), the initial close needs to go: die() would again write nowhere if we close STDERR beforehand. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-26Merge branch 'jc/perl-cat-blob' into maintLibravatar Junio C Hamano1-10/+7
perl/Git.pm::cat_blob slurped everything in core only to write it out to a file descriptor, which was not a very smart thing to do. * jc/perl-cat-blob: Git.pm: fix cat_blob crashes on large files
2013-03-21Merge branch 'mn/send-email-works-with-credential'Libravatar Junio C Hamano1-21/+177
Hooks the credential system to send-email. * mn/send-email-works-with-credential: git-send-email: use git credential to obtain password Git.pm: add interface for git credential command Git.pm: allow pipes to be closed prior to calling command_close_bidi_pipe Git.pm: refactor command_close_bidi_pipe to use _cmd_close Git.pm: fix example in command_close_bidi_pipe documentation Git.pm: allow command_close_bidi_pipe to be called as method
2013-03-21Merge branch 'jc/perl-cat-blob'Libravatar Junio C Hamano1-10/+7
perl/Git.pm::cat_blob slurped everything in core only to write it out to a file descriptor, which was not a very smart thing to do. * jc/perl-cat-blob: Git.pm: fix cat_blob crashes on large files
2013-02-27Git.pm: add interface for git credential commandLibravatar Michal Nazarewicz1-0/+151
Add a credential() function which is an interface to the git credential command. The code is heavily based on credential_* functions in <contrib/mw-to-git/git-remote-mediawiki>. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-22Git.pm: fix cat_blob crashes on large filesLibravatar Joshua Clayton1-10/+7
Read and write each 1024 byte buffer, rather than trying to buffer the entire content of the file. We are only copying the contents to a file descriptor and do not use it ourselves. Previous code would crash on all files > 2 Gib, when the offset variable became negative (perhaps below the level of perl), resulting in a crash. On a 32 bit system, or a system with low memory it might crash before reaching 2 GiB due to memory exhaustion. This code may leave a partial file behind in case of failure, where the old code would leave a completely empty file. Neither version verifies the correctness of the content. Calling code must take care of verification and cleanup. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-12Git.pm: allow pipes to be closed prior to calling command_close_bidi_pipeLibravatar Michal Nazarewicz1-1/+14
The command_close_bidi_pipe() function will insist on closing both input and output pipes returned by command_bidi_pipe(). With this change it is possible to close one of the pipes in advance and pass undef as an argument. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-12Git.pm: refactor command_close_bidi_pipe to use _cmd_closeLibravatar Michal Nazarewicz1-19/+11
The body of the loop in command_close_bidi_pipe sub is identical to what _cmd_close sub does. Instead of duplicating, refactor _cmd_close so that it accepts a list of file handles to be closed, which makes it usable with command_close_bidi_pipe. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-09perl/Git.pm: fix get_tz_offset to properly handle DST boundary casesLibravatar Ben Walton1-3/+3
When passed a local time that was on the boundary of a DST change, get_tz_offset returned a GMT offset that was incorrect (off by one hour). This is because the time was converted to GMT and then back to a time stamp via timelocal() which cannot disambiguate boundary cases as noted in its documentation. Modify this algorithm, using an approach suggested in http://article.gmane.org/gmane.comp.version-control.git/213871 to first convert the timestamp in question to two broken down forms with localtime() and gmtime(), and then compute what timestamps these two broken down forms would represent in GMT (i.e. a timezone that does not have DST issues) by applying timegm() on them. The difference between the resulting timestamps is the timezone offset. This avoids the ambigious conversion and allows a correct time to be returned on every occassion. Signed-off-by: Ben Walton <bdwalton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-09Move Git::SVN::get_tz to Git::get_tz_offsetLibravatar Ben Walton1-0/+23
This function has utility outside of the SVN module for any routine that needs the equivalent of GNU strftime's %z formatting option. Move it to the top-level Git.pm so that non-SVN modules don't need to import the SVN module to use it. The rename makes the purpose of the function clearer. Signed-off-by: Ben Walton <bdwalton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-07Git.pm: fix example in command_close_bidi_pipe documentationLibravatar Michal Nazarewicz1-1/+1
File handle goes as the first argument when calling print on it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-07Git.pm: allow command_close_bidi_pipe to be called as methodLibravatar Michal Nazarewicz1-1/+1
The documentation of command_close_bidi_pipe() claims that it can be called as a method, but it does not check whether the first argument is $self or not assuming the latter. Using _maybe_self() fixes this. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-17git-svn, perl/Git.pm: extend and use Git->prompt method for querying usersLibravatar Sven Strickroth1-11/+17
git-svn reads usernames and other user queries from an interactive terminal. This cause GUIs (w/o STDIN connected) to hang waiting forever for git-svn to complete (http://code.google.com/p/tortoisegit/issues/detail?id=967). This change extends the Git::prompt helper, so that it can also be used for non password queries, and makes use of it instead of using hand-rolled prompt-response code that only works with the interactive terminal. Signed-off-by: Sven Strickroth <email@cs-ware.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-17perl/Git.pm: Honor SSH_ASKPASS as fallback if GIT_ASKPASS is not setLibravatar Sven Strickroth1-2/+5
If GIT_ASKPASS environment variable is not set, git-svn does not try to use SSH_ASKPASS as git-core does. This change adds a fallback to SSH_ASKPASS. Signed-off-by: Sven Strickroth <email@cs-ware.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-17git-svn, perl/Git.pm: add central method for prompting passwordsLibravatar Sven Strickroth1-1/+44
git-svn reads passwords from an interactive terminal or by using GIT_ASKPASS helper tool. This cause GUIs (w/o STDIN connected) to hang waiting forever for git-svn to complete (http://code.google.com/p/tortoisegit/issues/detail?id=967). Commit 56a853b62c0ae7ebaad0a7a0a704f5ef561eb795 also tried to solve this issue, but was incomplete as described above. Instead of using hand-rolled prompt-response code that only works with the interactive terminal, a reusable prompt() method is introduced in this commit. Signed-off-by: Sven Strickroth <email@cs-ware.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-28correct spelling: an URL -> a URLLibravatar Jim Meyering1-1/+1
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-18libperl-git: refactor Git::config_*Libravatar Junio C Hamano1-64/+24
Move common parts of Git::config(), Git::config_bool(), Git::config_int() and Git::config_path() into _config_common() helper. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-30Add Git::config_path()Libravatar Cord Seele1-0/+32
Use --path option when calling 'git config' thus allow for pathname expansion, e.g. a tilde. Signed-off-by: Cord Seele <cowose@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-14perl: command_bidi_pipe() method should set-up git environmensLibravatar Masatake Osanai1-5/+20
When command_input_pipe and command_output_pipe are used as a method of a Git::repository instance, they eventually call into _cmd_exec method that sets up the execution environment such as GIT_DIR, GIT_WORK_TREE environment variables and the current working directory in the child process that interacts with the repository. command_bidi_pipe however didn't expect to be called as such, and lacked all these set-up. Because of this, a program that did this did not work as expected: my $repo = Git->repository(Directory => '/some/where/else'); my ($pid, $in, $out, $ctx) = $repo->command_bidi_pipe(qw(hash-object -w --stdin-paths)); This patch refactors the _cmd_exec into _setup_git_cmd_env that sets up the execution environment, and makes _cmd_exec and command_bidi_pipe to use it. Note that unlike _cmd_exec that execv's a git command as an external process, command_bidi_pipe is called from the main line of control, and the execution environment needs to be restored after open2() does its magic. Signed-off-by: Masatake Osanai <unpush@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-27perl: bump the required Perl version to 5.8 from 5.6.[21]Libravatar Ævar Arnfjörð Bjarmason1-0/+1
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already used the three-arg form of open() which was introduced in 5.6.1, but t/t9700/test.pl explicitly depended on 5.6.2. However git-add--interactive.pl has been failing on the 5.6 line since it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open syntax: sub run_cmd_pipe { my $fh = undef; open($fh, '-|', @_) or die; return <$fh>; } Which when executed dies on "Can't use an undefined value as filehandle reference". Several of our tests also fail on 5.6 (even more when compiled with NO_PERL_MAKEMAKER=1): t2016-checkout-patch.sh t3904-stash-patch.sh t3701-add-interactive.sh t7105-reset-patch.sh t7501-commit.sh t9700-perl-git.sh Our code is bitrotting on 5.6 with no-one interested in fixing it, and pinning us to such an ancient release of Perl is keeping us from using useful features introduced in the 5.8 release. The 5.6 series is now over 10 years old, and the 5.6.2 maintenance release almost 7. 5.8 on the other hand is more than 8 years old. All the modern Unix-like operating systems have now upgraded to it or a later version, and 5.8 packages are available for old IRIX, AIX Solaris and Tru64 systems. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Tor Arntsen <tor@spacetec.no> Acked-by: Randal L. Schwartz <merlyn@stonehenge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-18Git.pm: better error messageLibravatar Philippe Bruhat (BooK)1-2/+2
Provide the bad directory name alongside with $! Note: $! is set if there is "No such file or directory", but isn't set if the file exists but is not a directory. Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-05git-svn: support fetch with autocrlf onLibravatar Erik Faye-Lund1-1/+1
Before commit d3c9634e, performing a "git svn rebase" that fetched a change containing CRLFs corrupted the git-svn meta-data. This was worked around in d3c9634e by setting core.autocrlf to "false" in the per-repo config when initing the clone. However, if the config variable was later changed, the corruption would still occur. This patch tries to fix it while allowing core.autocrlf to be enabled, by disabling filters when when hashing. git-svn is currently the only call-site for hash_and_insert_object (apart from the test-suite), so changing it should be safe. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
2010-02-03Typofixes outside documentation areaLibravatar Junio C Hamano1-2/+2
begining -> beginning canonicalizations -> canonicalization comand -> command dewrapping -> unwrapping dirtyness -> dirtiness DISCLAMER -> DISCLAIMER explicitely -> explicitly feeded -> fed impiled -> implied madatory -> mandatory mimick -> mimic preceeding -> preceding reqeuest -> request substition -> substitution Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-09Git.pm: Always set Repository to absolute path if autodetectingLibravatar Frank Lichtenheld1-1/+1
So far we only set it to absolute paths in some cases which lead to problems like wc_chdir not working. Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com> Acked-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-09Git.pm: Set GIT_WORK_TREE if we set GIT_DIRLibravatar Frank Lichtenheld1-0/+2
Otherwise git will use the current directory as work tree which will lead to unexpected results if we operate in sub directory of the work tree. Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com> Acked-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-04add --html-path to get the location of installed HTML docsLibravatar Markus Heidelberg1-1/+11
This can be used in GUIs to open installed HTML documentation in the browser. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-13Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: fast-import: Cleanup mode setting. Git.pm: call Error::Simple() properly
2009-01-13Merge branch 'maint-1.6.0' into maintLibravatar Junio C Hamano1-2/+2
* maint-1.6.0: fast-import: Cleanup mode setting. Git.pm: call Error::Simple() properly
2009-01-13Git.pm: call Error::Simple() properlyLibravatar Jay Soffian1-2/+2
The error message to Error::Simple() must be passed as a single argument. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-01Git.pm: correctly handle directory name that evaluates to "false"Libravatar Philippe Bruhat (BooK)1-3/+4
The repository constructor mistakenly rewrote a Directory parameter that Perl happens to evaluate to false (e.g. "0") to ".". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21Always show which directory is not a git repositoryLibravatar Richard Hartmann1-2/+2
Unify all fatal: Not a git repository error messages so they include path information. Signed-off-by: Richard Hartmann <richih@net.in.tum.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>