| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce 'repo_worktree_path' and 'strbuf_repo_worktree_path' which
take a repository struct and constructs a path relative to the
repository's worktree.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce 'repo_git_path' and 'strbuf_repo_git_path' which take a
repository struct and constructs a path into the repository's git
directory.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_path is a convenience function that usually produces a string
$GIT_DIR/<path>. Since v2.5.0-rc0~143^2~35 (git_path(): be aware of
file relocation in $GIT_DIR, 2014-11-30), as a side benefit callers
get support for path relocation variables like $GIT_OBJECT_DIRECTORY:
- git_path("index") is $GIT_INDEX_FILE when set
- git_path("info/grafts") is $GIT_GRAFTS_FILE when set
- git_path("objects/<foo>") is $GIT_OBJECT_DIRECTORY/<foo> when set
- git_path("hooks/<foo>") is <foo> under core.hookspath when set
- git_path("refs/<foo>") etc (see path.c::common_list) is relative
to $GIT_COMMON_DIR instead of $GIT_DIR
worktree_git_path, by comparison, is designed to resolve files in a
specific worktree's git dir. Unfortunately, it shares code with
git_path and performs the same relocation. The result is that paths
that are meant to be relative to the specified worktree's git dir end
up replaced by paths from environment variables within the current git
dir.
Luckily, no current callers pass such arguments. The relocation was
noticed when testing the result of merging two patches under review,
one of which introduces a caller:
* The first patch made git prune check the index file in each
worktree's git dir (using worktree_git_path(wt, "index")) for
objects not to prune. This would trigger the unwanted relocation
when GIT_INDEX_FILE is set, causing objects reachable from the
index to be pruned.
* The second patch simplified the relocation logic for index,
info/grafts, objects, and hooks to happen unconditionally instead of
based on whether environment or configuration variables are set.
This caused the relocation to trigger even when GIT_INDEX_FILE is
not set.
[jn: rewrote commit message; skipping all relocation instead of just
GIT_INDEX_FILE]
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation to adding 'git_path' like functions which operate on a
'struct repository' convert 'do_git_path' to take a 'struct repository'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of passing in 'NULL' and having 'update_common_dir()' query for
the commondir, have the callers of 'update_common_dir()' be responsible
for providing the commondir.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move all path related declarations from cache.h to a new path.h header
file. This makes cache.h smaller and makes it easier to add new path
related functions.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Migrate 'git_dir', 'git_common_dir', 'git_object_dir', 'git_index_file',
'git_graft_file', and 'namespace' to be stored in 'the_repository'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
|
|
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
|
|
In the next patch we need the ability to expand '~' to
real_path($HOME). But we can't do that from outside because '~' is part
of a pattern, not a true path. Add an option to expand_user_path() to do
so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
refs is learning to avoid path rewriting that is done by
strbuf_git_path_submodule(). Factor out this code so it could be reused
by refs_* functions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already have xdg_config_home to format paths relative to
XDG_CONFIG_HOME. Let's provide a similar function xdg_cache_home to do
the same for paths relative to XDG_CACHE_HOME.
Signed-off-by: Devin Lehmacher <lehmacdj@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A pathname that begins with "//" or "\\" on Windows is special but
path normalization logic was unaware of it.
* js/normalize-path-copy-ceil:
normalize_path_copy(): fix pushing to //server/share/dir on Windows
|
|
normalize_path_copy() is not prepared to keep the double-slash of a
//server/share/dir kind of path, but treats it like a regular POSIX
style path and transforms it to /server/share/dir.
The bug manifests when 'git push //server/share/dir master' is run,
because tmp_objdir_add_as_alternate() uses the path in normalized
form when it registers the quarantine object database via
link_alt_odb_entries(). Needless to say that the directory cannot be
accessed using the wrongly normalized path.
Fix it by skipping all of the root part, not just a potential drive
prefix. offset_1st_component takes care of this, see the
implementation in compat/mingw.c::mingw_offset_1st_component().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code that we have used for the past 10+ years to cycle
4-element ring buffers turns out to be not quite portable in
theoretical world.
* rs/ring-buffer-wraparound:
hex: make wraparound of the index into ring-buffer explicit
|
|
Overflow is defined for unsigned integers, but not for signed ones.
We could make the ring-buffer index in sha1_to_hex() and
get_pathname() unsigned to be on the safe side to resolve this, but
let's make it explicit that we are wrapping around at whatever the
number of elements the ring-buffer has. The compiler is smart enough
to turn modulus into bitmask for these codepaths that use
ring-buffers of a size that is a power of 2.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git diff --submodule={short,log}" mechanism has been enhanced
to allow "--submodule=diff" to show the patch between the submodule
commits bound to the superproject.
* jk/diff-submodule-diff-inline:
diff: teach diff to display submodule difference with an inline diff
submodule: refactor show_submodule_summary with helper function
submodule: convert show_submodule_summary to use struct object_id *
allow do_submodule_path to work even if submodule isn't checked out
diff: prepare for additional submodule formats
graph: add support for --line-prefix on all graph-aware output
diff.c: remove output_prefix_length field
cache: add empty_tree_oid object and helper function
|
|
Currently, do_submodule_path will attempt locating the .git directory by
using read_gitfile on <path>/.git. If this fails it just assumes the
<path>/.git is actually a git directory.
This is good because it allows for handling submodules which were cloned
in a regular manner first before being added to the superproject.
Unfortunately this fails if the <path> is not actually checked out any
longer, such as by removing the directory.
Fix this by checking if the directory we found is actually a gitdir. In
the case it is not, attempt to lookup the submodule configuration and
find the name of where it is stored in the .git/modules/ directory of
the superproject.
If we can't locate the submodule configuration, this might occur because
for example a submodule gitlink was added but the corresponding
.gitmodules file was not properly updated. A die() here would not be
pleasant to the users of submodule diff formats, so instead, modify
do_submodule_path() to return an error code:
- git_pathdup_submodule() returns NULL when we fail to find a path.
- strbuf_git_path_submodule() propagates the error code to the caller.
Modify the callers of these functions to check the error code and fail
properly. This ensures we don't attempt to use a bad path that doesn't
match the corresponding submodule.
Because this change fixes add_submodule_odb() to work even if the
submodule is not checked out, update the wording of the submodule log
diff format to correctly display that the submodule is "not initialized"
instead of "not checked out"
Add tests to ensure this change works as expected.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-parse --git-path hooks/<hook>" learned to take
core.hooksPath configuration variable (introduced during 2.9 cycle)
into account.
* ab/hooks:
rev-parse: respect core.hooksPath in --git-path
|
|
The idea of the --git-path option is not only to avoid having to
prefix paths with the output of --git-dir all the time, but also to
respect overrides for specific common paths inside the .git directory
(e.g. `git rev-parse --git-path objects` will report the value of the
environment variable GIT_OBJECT_DIRECTORY, if set).
When introducing the core.hooksPath setting, we forgot to adjust
git_path() accordingly. This patch fixes that.
While at it, revert the special-casing of core.hooksPath in
run-command.c, as it is now no longer needed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/use-strbuf-addbuf:
strbuf: avoid calling strbuf_grow() twice in strbuf_addbuf()
use strbuf_addbuf() for appending a strbuf to another
|
|
Code cleanup.
* rs/use-strbuf-addbuf:
strbuf: avoid calling strbuf_grow() twice in strbuf_addbuf()
use strbuf_addbuf() for appending a strbuf to another
|
|
Use strbuf_addbuf() where possible; it's shorter and more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
|
|
* lp/typofixes:
typofix: assorted typofixes in comments, documentation and messages
|
|
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
do_git_path(), which is the common code for all git_path* functions, is
modified to take a worktree struct and can produce paths for any
worktree.
worktree_git_path() is the first function that makes use of this. It can
be used to write code that can examine any worktree. For example,
wt_status_get_state() will be converted using this to take
am/rebase/... state of any worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are mostly convenient functions to reduce code duplication. Most
of the time, we should be able to get by with git_path() which handles
$GIT_COMMON_DIR internally. However there are a few cases where we need
to construct paths manually, for example some paths from a specific
worktree. These functions will enable that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
|
|
On Windows, the backslash is the native directory separator, but all
supported Windows versions also accept the forward slash in most
circumstances.
Our tests expect forward slashes.
Relative paths are generated by Git using forward slashes.
So let's try to be consistent and use forward slashes in the $HOME part
of the paths reported by `git config --show-origin`, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It would be useful to control access to the global
shared_repository, so that we can lazily load its config.
The first step to doing so is to make sure all access
goes through a set of functions.
This step is purely mechanical, and should result in no
change of behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
dirname() emulation has been added, as Msys2 lacks it.
* js/dirname-basename:
mingw: avoid linking to the C library's isalpha()
t0060: loosen overly strict expectations
t0060: verify that basename() and dirname() work as expected
compat/basename.c: provide a dirname() compatibility function
compat/basename: make basename() conform to POSIX
Refactor skipping DOS drive prefixes
|
|
Junio noticed that there is an implicit assumption in pretty much
all the code calling has_dos_drive_prefix(): it forces all of its
callsites to hardcode the knowledge that the DOS drive prefix is
always two bytes long.
While this assumption is pretty safe, we can still make the code
more readable and less error-prone by introducing a function that
skips the DOS drive prefix safely.
While at it, we change the has_dos_drive_prefix() return value: it
now returns the number of bytes to be skipped if there is a DOS
drive prefix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code preparation for pluggable ref backends.
* dt/refs-backend-pre-vtable:
refs: break out ref conflict checks
files_log_ref_write: new function
initdb: make safe_create_dir public
refs: split filesystem-based refs code into a new file
refs/refs-internal.h: new header file
refname_is_safe(): improve docstring
pack_if_possible_fn(): use ref_type() instead of is_per_worktree_ref()
copy_msg(): rename to copy_reflog_msg()
verify_refname_available(): new function
verify_refname_available(): rename function
|
|
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
We may want to do the same for .bitmap (and notice but not prune
.keep) without corresponding .pack, but that can be a separate
topic.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
|
|
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
|
|
Soon we will want to create initdb functions for ref backends, and
code from initdb that calls this function needs to move into the files
backend. So this function needs to be public.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
|
|
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
|
|
The submodule code has been taught to work better with separate
work trees created via "git worktree add".
* mk/submodule-gitdir-path:
path: implement common_dir handling in git_pathdup_submodule()
submodule refactor: use strbuf_git_path_submodule() in add_submodule_odb()
|
|
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
|
|
The normalize_ceiling_entry() function does not muck with the end
of the path it accepts, and the real world callers do rely on that,
but a test insisted that the function drops a trailing slash.
* rd/test-path-utils:
test-path-utils.c: remove incorrect assumption
|
|
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
|
|
The submodule code has been taught to work better with separate
work trees created via "git worktree add".
* mk/submodule-gitdir-path:
path: implement common_dir handling in git_pathdup_submodule()
submodule refactor: use strbuf_git_path_submodule() in add_submodule_odb()
|
|
In normalize_ceiling_entry(), we test that normalized paths end with
slash, *unless* the path to be normalized was already the root
directory.
However, normalize_path_copy() does not even enforce this condition.
Even worse: on Windows, the root directory gets translated into a
Windows directory by the Bash before being passed to `git.exe` (or
`test-path-utils.exe`), which means that we cannot even know whether
the path that was passed to us was the root directory to begin with.
This issue has already caused endless hours of trying to "fix" the
MSYS2 runtime, only to break other things due to MSYS2 ensuring that
the converted path maintains the same state as the input path with
respect to any final '/'.
So let's just forget about this test. It is non-essential to Git's
operation, anyway.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
|
|
When working with paths in strbufs, we frequently want to
ensure that a directory contains a trailing slash before
appending to it. We can shorten this code (and make the
intent more obvious) by calling strbuf_complete.
Most of these cases are trivially identical conversions, but
there are two things to note:
- in a few cases we did not check that the strbuf is
non-empty (which would lead to an out-of-bounds memory
access). These were generally not triggerable in
practice, either from earlier assertions, or typically
because we would have just fed the strbuf to opendir(),
which would choke on an empty path.
- in a few cases we indexed the buffer with "original_len"
or similar, rather than the current sb->len, and it is
not immediately obvious from the diff that they are the
same. In all of these cases, I manually verified that
the strbuf does not change between the assignment and
the strbuf_complete call.
This does not convert cases which look like:
if (sb->len && !is_dir_sep(sb->buf[sb->len - 1]))
strbuf_addch(sb, '/');
as those are obviously semantically different. Some of these
cases arguably should be doing that, but that is out of
scope for this change, which aims purely for cleanup with no
behavior change (and at least it will make such sites easier
to find and examine in the future, as we can grep for
strbuf_complete).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function strcpy's directly into a PATH_MAX-sized
buffer. There's only one caller, which feeds the git_dir into
it, so it's not easy to trigger in practice (even if you fed
a large $GIT_DIR through the environment or .git file, it
would have to actually exist and be accessible on the
filesystem to get to this point). We can fix it by moving to
a strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use two PATH_MAX-sized buffers to represent the repo
path, and must make sure not to overflow them. We do take
care to check the lengths, but the logic is rather hard to
follow, as we use several magic numbers (e.g., "PATH_MAX -
10"). And in fact you _can_ overflow the buffer if you have
a ".git" file with an extremely long path in it.
By switching to strbufs, these problems all go away. We do,
however, retain the check that the initial input we get is
no larger than PATH_MAX. This function is an entry point for
untrusted repo names from the network, and it's a good idea
to keep a sanity check (both to avoid allocating arbitrary
amounts of memory, and also as a layer of defense against
any downstream users of the names).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Strict mode is about not guessing where .git is. If the user points to a
.git file, we know exactly where the target .git dir will be. This makes
it possible to serve .git files as repository on the server side.
This may be needed even in local clone case because transport.c code
uses upload-pack for fetching remote refs. But right now the
clone/transport code goes with non-strict.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It matters for linked checkouts where 'refs' directory won't be
available in $GIT_DIR. is_git_directory() knows about $GIT_COMMON_DIR
and can handle this case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Brandon Williams
Junio C Hamano
Nguyễn Thái Ngọc Duy
Devin Lehmacher
Johannes Sixt
René Scharfe
Jacob Keller
Johannes Schindelin
Li Peng
Jeff King
David Turner
Ray Donnelly