summaryrefslogtreecommitdiff
path: root/path.c
AgeCommit message (Collapse)AuthorFilesLines
2012-10-29longest_ancestor_length(): require prefix list entries to be normalizedLibravatar Michael Haggerty1-15/+11
Move the responsibility for normalizing prefixes from longest_ancestor_length() to its callers. Use slightly different normalizations at the two callers: In setup_git_directory_gently_1(), use the old normalization, which ignores paths that are not usable. In the next commit we will change this caller to also resolve symlinks in the paths from GIT_CEILING_DIRECTORIES as part of the normalization. In "test-path-utils longest_ancestor_length", use the old normalization, but die() if any paths are unusable. Also change t0060 to only pass normalized paths to the test program (no empty entries or non-absolute paths, strip trailing slashes from the paths, and remove tests that thereby become redundant). The point of this change is to reduce the scope of the ancestor_length tests in t0060 from testing normalization+longest_prefix to testing only mostly longest_prefix. This is necessary because when setup_git_directory_gently_1() starts resolving symlinks as part of its normalization, it will not be reasonable to do the same in the test suite, because that would make the test results depend on the contents of the root directory of the filesystem on which the test is run. HOWEVER: under Windows, bash mangles arguments that look like absolute POSIX paths into DOS paths. So we have to retain the level of normalization done by normalize_path_copy() to convert the bash-mangled DOS paths (which contain backslashes) into paths that use forward slashes. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net>
2012-10-29longest_ancestor_length(): take a string_list argument for prefixesLibravatar Michael Haggerty1-13/+9
Change longest_ancestor_length() to take the prefixes argument as a string_list rather than as a colon-separated string. This will make it easier for the caller to alter the entries before calling longest_ancestor_length(). Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net>
2012-10-29longest_ancestor_length(): use string_list_split()Libravatar Michael Haggerty1-7/+11
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net>
2012-09-04path.c: Use vsnpath() in the implementation of git_path()Libravatar Ramsay Jones1-12/+3
The current implementation of git_path() is essentially the same as that of vsnpath(), with two minor differences. First, git_path() currently insists that the git directory path is no longer than PATH_MAX-100 characters in length. However, vsnpath() does not attempt this arbitrary 100 character reservation for the remaining path components. Second, vsnpath() uses the "is_dir_sep()" macro, rather than comparing directly to '/', to determine if the git_dir path component ends with a path separator. In order to benefit from the above improvements, along with increased compatability with git_snpath() and git_pathdup(), we reimplement the git_path() function using vsnpath(). Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-04path.c: Don't discard the return value of vsnpath()Libravatar Ramsay Jones1-5/+6
The git_snpath() and git_pathdup() functions both use the (static) function vsnpath() in their implementation. Also, they both discard the return value of vsnpath(), which has the effect of ignoring the side effect of calling cleanup_path() in the non-error return path. In order to ensure that the required cleanup happens, we use the pointer returned by vsnpath(), rather than the buffer passed into vsnpath(), to derive the return value from git_snpath() and git_pathdup(). Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-04path.c: Remove the 'git_' prefix from a file scope functionLibravatar Ramsay Jones1-3/+3
In particular, the git_vsnpath() function, despite the 'git_' prefix suggesting otherwise, is (correctly) declared with file scope. Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-25config: read (but not write) from $XDG_CONFIG_HOME/git/config fileLibravatar Huynh Khoi Nguyen Nguyen1-0/+41
Teach git to read the "gitconfig" information from a new location, $XDG_CONFIG_HOME/git/config; this allows the user to avoid cluttering $HOME with many per-application configuration files. In the order of reading, this file comes between the global configuration file (typically $HOME/.gitconfig) and the system wide configuration file (typically /etc/gitconfig). We do not write to this new location (yet). If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config will be used. This is in line with XDG specification. If the new file does not exist, the behavior is unchanged. Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr> Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr> Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr> Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr> Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02standardize and improve lookup rules for external local reposLibravatar Jeff King1-2/+5
When you specify a local repository on the command line of clone, ls-remote, upload-pack, receive-pack, or upload-archive, or in a request to git-daemon, we perform a little bit of lookup magic, doing things like looking in working trees for .git directories and appending ".git" for bare repos. For clone, this magic happens in get_repo_path. For everything else, it happens in enter_repo. In both cases, there are some ambiguous or confusing cases that aren't handled well, and there is one case that is not handled the same by both methods. This patch tries to provide (and test!) standard, sensible lookup rules for both code paths. The intended changes are: 1. When looking up "foo", we have always preferred a working tree "foo" (containing "foo/.git" over the bare "foo.git". But we did not prefer a bare "foo" over "foo.git". With this patch, we do so. 2. We would select directories that existed but didn't actually look like git repositories. With this patch, we make sure a selected directory looks like a git repo. Not only is this more sensible in general, but it will help anybody who is negatively affected by change (1) negatively (e.g., if they had "foo.git" next to its separate work tree "foo", and expect to keep finding "foo.git" when they reference "foo"). 3. The enter_repo code path would, given "foo", look for "foo.git/.git" (i.e., do the ".git" append magic even for a repo with working tree). The clone code path did not; with this patch, they now behave the same. In the unlikely case of a working tree overlaying a bare repo (i.e., a ".git" directory _inside_ a bare repo), we continue to treat it as a working tree (prefering the "inner" .git over the bare repo). This is mainly because the combination seems nonsensical, and I'd rather stick with existing behavior on the off chance that somebody is relying on it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-04Learn to handle gitfiles in enter_repoLibravatar Phil Hord1-1/+7
The enter_repo() function is used to navigate into a .git directory. It knows how to find standard alternatives (DWIM) but it doesn't handle gitfiles created by git init --separate-git-dir. This means that git-fetch and others do not work with repositories using the separate-git-dir mechanism. Teach enter_repo() to deal with the gitfile mechanism by resolving the path to the redirected path and continuing tests on that path instead of the found file. Signed-off-by: Phil Hord <hordp@cisco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-04enter_repo: do not modify inputLibravatar Erik Faye-Lund1-16/+12
entr_repo(..., 0) currently modifies the input to strip away trailing slashes. This means that we some times need to copy the input to keep the original. Change it to unconditionally copy it into the used_path buffer so we can safely use the input without having to copy it. Also store a working copy in validated_path up-front before we start resolving anything. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Phil Hord <hordp@cisco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-22read_gitfile_gently(): rename misnamed function to read_gitfile()Libravatar Junio C Hamano1-1/+1
The function was not gentle at all to the callers and died without giving them a chance to deal with possible errors. Rename it to read_gitfile(), and update all the callers. As no existing caller needs a true "gently" variant, we do not bother adding one at this point. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-17Name make_*_path functions more accuratelyLibravatar Carlos Martín Nieto1-1/+1
Rename the make_*_path functions so it's clearer what they do, in particlar make clear what the differnce between make_absolute_path and make_nonrelative_path is by renaming them real_path and absolute_path respectively. make_relative_path has an understandable name and is renamed to relative_path to maintain the name convention. The function calls have been replaced 1-to-1 in their usage. Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-10path helpers: move git_mkstemp* to wrapper.cLibravatar Jonathan Nieder1-113/+0
git_mkstemp_mode and related functions do not require access to specialized git machinery, unlike some other functions from path.c (like set_shared_perm()). Move them to wrapper.c where the wrapper xmkstemp_mode is defined. This eliminates a dependency of wrapper.o on environment.o via path.o. With typical linkers (e.g., gcc), that dependency makes programs that use functions from wrapper.o and not environment.o or path.o larger than they need to be. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-21Merge branch 'hv/submodule-find-ff-merge'Libravatar Junio C Hamano1-0/+38
* hv/submodule-find-ff-merge: Implement automatic fast-forward merge for submodules setup_revisions(): Allow walking history in a submodule Teach ref iteration module about submodules Conflicts: submodule.c
2010-07-27Sync with 1.7.0 seriesLibravatar Junio C Hamano1-0/+2
2010-07-27config --get --path: check for unset $HOMELibravatar Jonathan Nieder1-0/+2
If $HOME is unset (as in some automated build situations), currently git config --path path.home "~" git config --path --get path.home segfaults. Error out with Failed to expand user dir in: '~/' instead. Reported-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-07Teach ref iteration module about submodulesLibravatar Heiko Voigt1-0/+38
We will use this in a later patch to extend setup_revisions() to load revisions directly from a submodule. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-08Merge branch 'mm/mkstemps-mode-for-packfiles' into maintLibravatar Junio C Hamano1-0/+79
* mm/mkstemps-mode-for-packfiles: Use git_mkstemp_mode instead of plain mkstemp to create object files git_mkstemps_mode: don't set errno to EINVAL on exit. Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later. git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument. Move gitmkstemps to path.c Add a testcase for ACL with restrictive umask.
2010-03-07Merge branch 'nd/root-git'Libravatar Junio C Hamano1-0/+7
* nd/root-git: Add test for using Git at root of file system Support working directory located at root Move offset_1st_component() to path.c init-db, rev-parse --git-dir: do not append redundant slash make_absolute_path(): Do not append redundant slash Conflicts: setup.c sha1_file.c
2010-03-07Merge branch 'mm/mkstemps-mode-for-packfiles'Libravatar Junio C Hamano1-0/+79
* mm/mkstemps-mode-for-packfiles: Use git_mkstemp_mode instead of plain mkstemp to create object files git_mkstemps_mode: don't set errno to EINVAL on exit. Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later. git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument. Move gitmkstemps to path.c Add a testcase for ACL with restrictive umask.
2010-02-22git_mkstemps_mode: don't set errno to EINVAL on exit.Libravatar Matthieu Moy1-1/+0
When reaching the end of git_mkstemps_mode, at least one call to open() has been done, and errno has been set accordingly. Setting errno is therefore not necessary, and actually harmfull since callers can't distinguish e.g. permanent failure from ENOENT, which can just mean that we need to create the containing directory. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-22git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.Libravatar Matthieu Moy1-2/+13
gitmkstemps emulates the behavior of mkstemps, which is usually used to create files in a shared directory like /tmp/, hence, it creates files with permission 0600. Add git_mkstemps_mode() that allows us to specify the desired mode, and make git_mkstemps() a wrapper that always uses 0600 to call it. Later we will use git_mkstemps_mode() when creating pack files. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-22Move gitmkstemps to path.cLibravatar Matthieu Moy1-0/+69
This function used to be only a compatibility function, but we're going to extend it and actually use it, so make it part of Git. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-16Merge branch 'jc/typo'Libravatar Junio C Hamano1-1/+1
* jc/typo: Typofixes outside documentation area
2010-02-16Move offset_1st_component() to path.cLibravatar Nguyễn Thái Ngọc Duy1-0/+7
The implementation is also lightly modified to use is_dir_sep() instead of hardcoding '/'. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-06setenv(GIT_DIR) clean-upLibravatar René Scharfe1-1/+1
This patch converts the setenv() calls in path.c and setup.c. After the call, git grep with a pager works again in bare repos. It leaves the setenv(GIT_DIR_ENVIRONMENT, ...) calls in git.c alone, as they respond to command line switches that emulate the effect of setting the environment variable directly. The remaining site in environment.c is in set_git_dir() and is left alone, too, of course. Finally, builtin-init-db.c is left changed because the repo is still being carefully constructed when the environment variable is set. This fixes git shortlog when run inside a git directory, which had been broken by abe549e1. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-03Typofixes outside documentation areaLibravatar Junio C Hamano1-1/+1
begining -> beginning canonicalizations -> canonicalization comand -> command dewrapping -> unwrapping dirtyness -> dirtiness DISCLAMER -> DISCLAIMER explicitely -> explicitly feeded -> fed impiled -> implied madatory -> mandatory mimick -> mimic preceeding -> preceding reqeuest -> request substition -> substitution Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-22ignore duplicated slashes in make_relative_path()Libravatar Junio C Hamano1-9/+30
The function takes two paths, an early part of abs is supposed to match base; otherwise abs is not a path under base and the function returns the full path of abs. The caller can easily confuse the implementation by giving duplicated and needless slashes in these path arguments. Credit for test script, motivation and initial patch goes to Thomas Rast. A follow-up fix (squashed) is by Hannes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-22Merge branch 'mm/config-pathname-tilde-expand'Libravatar Junio C Hamano1-33/+50
* mm/config-pathname-tilde-expand: Documentation: avoid xmlto input error expand_user_path: expand ~ to $HOME, not to the actual homedir. Expand ~ and ~user in core.excludesfile, commit.template
2009-11-19expand_user_path: expand ~ to $HOME, not to the actual homedir.Libravatar Matthieu Moy1-4/+9
In 395de250d (Expand ~ and ~user in core.excludesfile, commit.template), we introduced the mechanism. But expanding ~ using getpw is not what people overriding $HOME would usually expect. In particular, git looks for the user's .gitconfig using $HOME, so it's better to be consistent. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-17Expand ~ and ~user in core.excludesfile, commit.templateLibravatar Matthieu Moy1-34/+46
These config variables are parsed to substitute ~ and ~user with getpw entries. user_path() refactored into new function expand_user_path(), to allow dynamically allocating the return buffer. Original patch by Karl Chen, modified by Matthieu Moy, and further amended by Junio C Hamano. Signed-off-by: Karl Chen <quarl@quarl.org> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-09http-backend: Protect GIT_PROJECT_ROOT from /../ requestsLibravatar Shawn O. Pearce1-0/+47
Eons ago HPA taught git-daemon how to protect itself from /../ attacks, which Junio brought back into service in d79374c7b58d ("daemon.c and path.enter_repo(): revamp path validation"). I did not carry this into git-http-backend as originally we relied only upon PATH_TRANSLATED, and assumed the HTTP server had done its access control checks to validate the resolved path was within a directory permitting access from the remote client. This would usually be sufficient to protect a server from requests for its /etc/passwd file by http://host/smart/../etc/passwd sorts of URLs. However in 917adc036086 Mark Lodato added GIT_PROJECT_ROOT as an additional method of configuring the CGI. When this environment variable is used the web server does not generate the final access path and therefore may blindly pass through "/../etc/passwd" in PATH_INFO under the assumption that "/../" might have special meaning to the invoked CGI. Instead of permitting these sorts of malformed path requests, we now reject them back at the client, with an error message for the server log. This matches git-daemon behavior. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-31diff: generate pretty filenames in prep_temp_blob()Libravatar David Aguilar1-0/+16
Naturally, prep_temp_blob() did not care about filenames. As a result, GIT_EXTERNAL_DIFF and textconv generated filenames such as ".diff_XXXXXX". This modifies prep_temp_blob() to generate user-friendly filenames when creating temporary files. Diffing "name.ext" now generates "XXXXXX_name.ext". Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-28set_shared_perm(): sometimes we know what the final mode bits should look likeLibravatar Junio C Hamano1-9/+16
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting to find what the result of applying user's umask is, and then tweaks it as necessary. When the file to be adjusted is created with mkstemp(3), however, the mode thusly obtained does not have anything to do with user's umask, and we would need to start from 0444 in such a case and there is no point running lstat(2) for such a path. This introduces a new API set_shared_perm() to bypass the lstat(2) and instead force setting the mode bits to the desired value directly. adjust_shared_perm() becomes a thin wrapper to the function. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-27"core.sharedrepository = 0mode" should set, not loosenLibravatar Junio C Hamano1-15/+21
This fixes the behaviour of octal notation to how it is defined in the documentation, while keeping the traditional "loosen only" semantics intact for "group" and "everybody". Three main points of this patch are: - For an explicit octal notation, the internal shared_repository variable is set to a negative value, so that we can tell "group" (which is to "OR" in 0660) and 0660 (which is to "SET" to 0660); - git-init did not set shared_repository variable early enough to affect the initial creation of many files, notably copied templates and the configuration. We set it very early when a command-line option specifies a custom value. - Many codepaths create files inside $GIT_DIR by various ways that all involve mkstemp(), and then call move_temp_to_file() to rename it to its final destination. We can add adjust_shared_perm() call here; for the traditional "loosen-only", this would be a no-op for many codepaths because the mode is already loose enough, but with the new behaviour it makes a difference. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-19Introduce the function strip_path_suffix()Libravatar Johannes Schindelin1-0/+36
The function strip_path_suffix() will try to strip a given suffix from a given path. The suffix must start at a directory boundary (i.e. "core" is not a path suffix of "libexec/git-core", but "git-core" is). Arbitrary runs of directory separators ("slashes") are assumed identical. Example: strip_path_suffix("C:\\msysgit/\\libexec\\git-core", "libexec///git-core", &prefix) will set prefix to "C:\\msysgit" and return 0. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-12Revert "validate_headref: tighten ref-matching to just branches"Libravatar Junio C Hamano1-2/+2
This reverts commit b229d18a809c169314b7f0d048dc5a7632e8f916, at least until we figure out how to work better with TopGit that points HEAD to refs/top-bases/ hierarchy.
2009-02-10Merge branch 'js/maint-1.6.0-path-normalize'Libravatar Junio C Hamano1-41/+83
* js/maint-1.6.0-path-normalize: Remove unused normalize_absolute_path() Test and fix normalize_path_copy() Fix GIT_CEILING_DIRECTORIES on Windows Move sanitary_path_copy() to path.c and rename it to normalize_path_copy() Make test-path-utils more robust against incorrect use
2009-02-07Remove unused normalize_absolute_path()Libravatar Johannes Sixt1-45/+6
This function is now superseded by normalize_path_copy(). Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-07Test and fix normalize_path_copy()Libravatar Johannes Sixt1-11/+5
This changes the test-path-utils utility to invoke normalize_path_copy() instead of normalize_absolute_path() because the latter is about to be removed. The test cases in t0060 are adjusted in two regards: - normalize_path_copy() more often leaves a trailing slash in the result. This has no negative side effects because the new user of this function, longest_ancester_length(), already accounts for this behavior. - The function can fail. The tests uncover a flaw in normalize_path_copy(): If there are sufficiently many '..' path components so that the root is reached, such as in "/d1/s1/../../d2", then the leading slash was lost. This manifested itself that (assuming there is a repository at /tmp/foo) $ git add /d1/../tmp/foo/some-file reported 'pathspec is outside repository'. This is now fixed. Moreover, the test case descriptions of t0060 now include the test data and expected outcome. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-07Fix GIT_CEILING_DIRECTORIES on WindowsLibravatar René Scharfe1-5/+6
Using git with GIT_CEILING_DIRECTORIES crashed on Windows due to a failed assertion in normalize_absolute_path(): This function expects absolute paths to start with a slash, while on Windows they can start with a drive letter or a backslash. This fixes it by using the alternative, normalize_path_copy() instead, which can handle Windows-style paths just fine. Secondly, the portability macro PATH_SEP is used instead of expecting colons to be used as path list delimiter. The test script t1504 is also changed to help MSYS's bash recognize some program arguments as path list. (MSYS's bash must translate POSIX-style path lists to Windows-style path lists, and the heuristic did not catch some cases.) Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-07Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()Libravatar Johannes Sixt1-0/+86
This function and normalize_absolute_path() do almost the same thing. The former already works on Windows, but the latter crashes. In subsequent changes we will remove normalize_absolute_path(). Here we make the replacement function reusable. On the way we rename it to reflect that it does some path normalization. Apart from that this is only moving around code. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-29validate_headref: tighten ref-matching to just branchesLibravatar Jeff King1-2/+2
When we are trying to determine whether a directory contains a git repository, one of the tests we do is to check whether HEAD is either a symlink or a symref into the "refs/" hierarchy, or a detached HEAD. We can tighten this a little more, though: a non-detached HEAD should always point to a branch (since checking out anything else should result in detachment), so it is safe to check for "refs/heads/". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-11Fix non-literal format in printf-style callsLibravatar Daniel Lowe1-2/+2
These were found using gcc 4.3.2-1ubuntu11 with the warning: warning: format not a string literal and no format arguments Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-08Merge branch 'ar/maint-mksnpath' into maintLibravatar Junio C Hamano1-0/+54
* ar/maint-mksnpath: Use git_pathdup instead of xstrdup(git_path(...)) git_pathdup: returns xstrdup-ed copy of the formatted path Fix potentially dangerous use of git_path in ref.c Add git_snpath: a .git path formatting routine with output buffer Fix potentially dangerous uses of mkpath and git_path Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c Add mksnpath which allows you to specify the output buffer Conflicts: builtin-revert.c rerere.c
2008-11-01fix overlapping memcpy in normalize_absolute_pathLibravatar Jeff King1-1/+1
The comments for normalize_absolute_path explicitly claim that the source and destination buffers may be the same (though they may not otherwise overlap). Thus the call to memcpy may involve copying overlapping data, and memmove should be used instead. This fixes a valgrind error in t1504. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-30git_pathdup: returns xstrdup-ed copy of the formatted pathLibravatar Alex Riesen1-4/+20
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-30Add git_snpath: a .git path formatting routine with output bufferLibravatar Alex Riesen1-0/+23
The function's purpose is to replace git_path where the buffer of formatted path may not be reused by subsequent calls of the function or will be copied anyway. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-26Add mksnpath which allows you to specify the output bufferLibravatar Alex Riesen1-0/+15
This is just vsnprintf's but additionally calls cleanup_path() on the result. To be used as alternatives to mkpath() where the buffer for the created path may not be reused by subsequent calls of the same formatting function. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Fix typo in comments of longest_ancestor_length()Libravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>