| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Programs may use usage_msg_opt() to print a brief message
followed by the program usage, and then exit. The message
isn't prefixed at all, though, so it doesn't match our usual
error output and is easy to overlook:
$ git clone 1 2 3
Too many arguments.
usage: git clone [<options>] [--] <repo> [<dir>]
-v, --verbose be more verbose
-q, --quiet be more quiet
--progress force progress reporting
-n, --no-checkout don't create a checkout
--bare create a bare repository
[...and so on for another 31 lines...]
It looks especially bad when the message starts with an
option, like:
$ git replace -e
-e needs exactly one argument
usage: git replace [-f] <object> <replacement>
or: git replace [-f] --edit <object>
[...etc...]
Let's put our usual "fatal:" prefix in front of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
OPT_COUNTUP() merely increments the counter upon --option, and resets it
to 0 upon --no-option, which means that there is no "unspecified" value
with which a client can initialize the counter to determine whether or
not --[no]-option was seen at all.
Make OPT_COUNTUP() treat any negative number as an "unspecified" value
to address this shortcoming. In particular, if a client initializes the
counter to -1, then if it is still -1 after parse_options(), then
neither --option nor --no-option was seen; if it is 0, then --no-option
was seen last, and if it is 1 or greater, than --option was seen last.
This change does not affect the behavior of existing clients because
they all use the initial value of 0 (or more).
Note that builtin/clean.c initializes the variable used with
OPT__FORCE (which uses OPT_COUNTUP()) to a negative value, but it is set
to either 0 or 1 by reading the configuration before the code calls
parse_options(), i.e. as far as parse_options() is concerned, the
initial value of the variable is not negative.
To test this behavior, in test-parse-options.c, "verbose" is set to
"unspecified" while quiet is set to 0 which will test the new behavior
with all sets of values.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let callers provide their own handler for the short option -h even
without the flag PARSE_OPT_NO_INTERNAL_HELP, but call the internal
handler (showing usage information) if that is the only parameter.
Implement the first part by checking for -h only if parse_short_opt()
can't find it and returns -2.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Avoid long lines and repeating parse_options_usage() calls with their
duplicate parameters by providing labels with speaking names to jump to.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
The unsigned long option parsing (including 'k'/'m'/'g' suffix
parsing) is more widely applicable. Add support for OPT_MAGNITUDE
to parse-options.h and change pack-objects.c use this support.
The error behavior on parse errors follows that of OPT_INTEGER. The
name of the option that failed to parse is reported with a brief
message describing the expect format for the option argument and
then the full usage message for the command invoked.
This differs from the previous behavior for OPT_ULONG used in
pack-objects for --max-pack-size and --window-memory which used to
display the value supplied in the error message and did not display
the full usage message.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add checks for a common programming mistake to assign the same
short option name to two separate options to help developers.
* jc/parseopt-verify-short-name:
parse-options: detect attempt to add a duplicate short option name
|
|
It is easy to overlook an already assigned single-letter option name
and try to use it for a new one. Help the developer to catch it
before such a mistake escapes the lab.
This retroactively forbids any short option name (which is defined
to be of type "int") outside the ASCII printable range. We might
want to do one of two things:
- tighten the type of short_name member to 'char', and further
update optbug() to protect it against doing "'%c'" on a funny
value, e.g. negative or above 127.
- drop the check (even the "duplicate" check) for an option whose
short_name is either negative or above 255, to allow clever folks
to take advantage of the fact that such a short_name cannot be
parsed from the command line and the member can be used to store
some extra information.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
OPT_SET_PTR() implementation was broken on IL32P64 platforms;
it turns out that the macro is not used by any real user.
* mr/opt-set-ptr:
parse-options: remove unused OPT_SET_PTR
parse-options: add cast to correct pointer type to OPT_SET_PTR
MSVC: fix t0040-parse-options crash
|
|
OPT_SET_PTR was never used since its creation at db7244bd
(parse-options new features., 2007-11-07).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We encourage to spell an argument hint that consists of multiple
words as a single-token separated with dashes. In order to help
catching violations added by new callers of parse-options, make sure
argh does not contain SP or _ when the code validates the option
definitions.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid scanning strings twice, once with strchr() and then with
strlen(), by using strchrnul().
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rohit Mani <rohit.mani@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This can be used to define a set of mutually exclusive "command
mode" options, and automatically catch use of more than one from
that set as an error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ef/non-ascii-parse-options-error-diag:
parse-options: report uncorrupted multi-byte options
|
|
Use a new helper that prints a message and counts its display width
to align the help messages parse-options produces.
* jx/utf8-printf-width:
Add utf8_fprintf helper that returns correct number of columns
|
|
Because our command-line parser considers only one byte at the time
for short-options, we incorrectly report only the first byte when
multi-byte input was provided. This makes user-errors slightly
awkward to diagnose for instance under UTF-8 locale and non-English
keyboard layouts.
Report the whole argument-string when a non-ASCII short-option is
detected.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since command usages can be translated, they may include utf-8
encoded strings, and the output in console may not align well any
more. This is because strlen() is different from strwidth() on utf-8
strings.
A wrapper utf8_fprintf() can help to return the correct number of
columns required.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a few error functions that simply wrap error() and
provide a standardized message text. Like error(), they
always return -1; knowing that can help the compiler silence
some false positive -Wuninitialized warnings.
One strategy would be to just declare these as inline in the
header file so that the compiler can see that they always
return -1. However, gcc does not always inline them (e.g.,
it will not inline opterror, even with -O3), which renders
our change pointless.
Instead, let's follow the same route we did with error() in
the last patch, and define a macro that makes the constant
return value obvious to the compiler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The user specifies a long option but forgets to type the second
leading dash, we currently detect and report that fact if its first
letter is a valid short option. This is done for safety, to avoid
ambiguity between short options (and their arguments) and a long
option with a missing dash.
This diagnostic message is also helpful for long options whose first
letter is not a valid short option, however. Print it in that case,
too, as a courtesy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
PARSE_OPT_NEGHELP is confusing because short options defined with that
flag do the opposite of what the helptext says. It is also not needed
anymore now that options starting with no- can be negated by removing
that prefix. Convert its only two users to OPT_NEGBIT() and OPT_BOOL()
and then remove support for PARSE_OPT_NEGHELP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long options can be negated by adding no- right after the leading
two dashes. This is useful e.g. to override options set by aliases.
For options that are defined to start with no- already, this looks
a bit funny. Allow such options to also be negated by removing the
prefix.
The following thirteen options are affected:
apply --no-add
bisect--helper --no-checkout
checkout-index --no-create
clone --no-checkout --no-hardlinks
commit --no-verify --no-post-rewrite
format-patch --no-binary
hash-object --no-filters
read-tree --no-sparse-checkout
revert --no-commit
show-branch --no-name
update-ref --no-deref
The following five are NOT affected because they are defined with
PARSE_OPT_NONEG or the non-negated version is defined as well:
branch --no-merged
format-patch --no-stat --no-numbered
update-index --no-assume-unchanged --no-skip-worktree
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is natural to expect that an option defined with OPT_BOOLEAN() could be
used in this way:
int option = -1; /* unspecified */
struct option options[] = {
OPT_BOOLEAN(0, "option", &option, "set option"),
OPT_END()
};
parse_options(ac, av, prefix, options, usage, 0);
if (option < 0)
... do the default thing ...
else if (!option)
... --no-option was given ...
else
... --option was given ...
to easily tell three cases apart:
- There is no mention of the `--option` on the command line;
- The variable is positively set with `--option`; or
- The variable is explicitly negated with `--no-option`.
Unfortunately, this is not the case. OPT_BOOLEAN() increments the variable
every time `--option` is given, and resets it to zero when `--no-option`
is given.
As a first step to remedy this, introduce a true boolean OPT_BOOL(), and
rename OPT_BOOLEAN() to OPT_COUNTUP(). To help transitioning, OPT_BOOLEAN
and OPTION_BOOLEAN are defined as deprecated synonyms to OPT_COUNTUP and
OPTION_COUNTUP respectively.
This is what db7244b (parse-options new features., 2007-11-07) from four
years ago started by marking OPTION_BOOLEAN as "INCR would have been a
better name".
Some existing users do depend on the count-up semantics; for example,
users of OPT__VERBOSE() could use it to raise the verbosity level with
repeated use of `-v` on the command line, but they probably should be
rewritten to use OPT__VERBOSITY() instead these days. I suspect that some
users of OPT__FORCE() may also use it to implement different level of
forcibleness but I didn't check.
On top of this patch, here are the remaining clean-up tasks that other
people can help:
- Look at each hit in "git grep -e OPT_BOOLEAN"; trace all uses of the
value that is set to the underlying variable, and if it can proven that
the variable is only used as a boolean, replace it with OPT_BOOL(). If
the caller does depend on the count-up semantics, replace it with
OPT_COUNTUP() instead.
- Same for OPTION_BOOLEAN; replace it with OPTION_SET_INT and arrange to
set 1 to the variable for a true boolean, and otherwise replace it with
OPTION_COUNTUP.
- Look at each hit in "git grep -e OPT__VERBOSE -e OPT__QUIET" and see if
they can be replaced with OPT__VERBOSITY().
I'll follow this message up with a separate patch as an example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently parse-options.o pulls quite a big bunch of dependencies.
his complicates it's usage in contrib/ because it pulls external
dependencies and it also increases executables size.
Split off less generic and more internal to git part of
parse-options.c to parse-options-cb.c.
Move prefix_filename function from setup.c to abspath.c. abspath.o
and wrapper.o pull each other, so it's unlikely to increase the
dependencies. It was a dependency of parse-options.o that pulled
many others.
Now parse-options.o pulls just abspath.o, ctype.o, strbuf.o, usage.o,
wrapper.o, libc directly and strlcpy.o indirectly.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
opterror and optbug functions are used by some of parsing routines
in parse-options.c to report errors and bugs respectively.
Export these functions to allow more custom parsing routines to use
them in a uniform way.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This just adds repeated invocations of an option to a list
of strings. Using the "--no-<var>" form will reset the list
to empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a PARSE_OPT_NON_OPTION state, so parse_option_step()
callers can easily distinguish between non-options and other
reasons for option parsing termination (like "--").
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse-options provides a variety of option behaviors, including
OPTION_CALLBACK, which should take care of just about any sane
behavior. All supported behaviors obey the following constraint:
A --foo option can only accept (and base its behavior on)
one argument, which would be the following command-line
argument in the "unsticked" form.
Alas, some existing git commands have options that do not obey that
constraint. For example, update-index --cacheinfo takes three
arguments, and update-index --resolve takes all later parameters as
arguments.
Introduces an OPTION_LOWLEVEL_CALLBACK backdoor to parse-options so
such option types can be supported without tempting inventors of other
commands through mention in the public API. Commands can set the
callback field to a function accepting three arguments: the option
parsing context, the option itself, and a flag indicating whether the
the option was negated. When the option is encountered, that function
is called to take over from get_value(). The return value should be
zero for success, -1 for usage errors.
Thanks to Stephen Boyd for API guidance.
Improved-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The PARSE_OPT_LITERAL_ARGHELP flag allows a program to override the
standard "<argument> for mandatory, [argument] for optional" markup in
its help message. Extend it to override the usual "no text for
disallowed", too (for the PARSE_OPT_NOARG | PARSE_OPT_LITERAL_ARGHELP
case, which was previously meaningless), to be more intuitive.
The motivation is to allow update-index to correctly advertise
--cacheinfo <mode> <object> <path>
add the specified entry to the index
while abusing PARSE_OPT_NOARG to disallow the "sticked form"
--cacheinfo=<mode> <object> <path>
Noticed-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the "takes no value" error path by relying on PARSE_OPT_NOARG
being set correctly. That is:
- if the PARSE_OPT_NOARG flag is set, reject --opt=value
regardless of the option type;
- if the PARSE_OPT_NOARG flag is unset, accept --opt=value
regardless of the option type.
This way, the accepted usage more closely matches the usage advertised
with --help-all.
No functional change intended, since the NOARG flag is only used
with "boolean-only" option types in existing parse_options callers.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some option types cannot use an argument --- boolean options that
would set a bit or flag or increment a counter, for example. If
configured in the flag word to accept an argument anyway, the result
is an argument that is advertised in "program -h" output only to be
rejected by parse-options::get_value.
Luckily all current users of these option types use PARSE_OPT_NOARG
and do not use PARSE_OPT_OPTARG. Add a check to ensure that that
remains true. The check is run once for each invocation of
parse_option_start().
Improved-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A dashless switch (like '(' passed to 'git grep') cannot be negated,
cannot be attached to an argument, and cannot have a long form.
Currently parse-options runs the related sanity checks when the
dashless option is used; better to always check them at the start of
option parsing, so mistakes can be caught more quickly.
The error message at the new call site is less specific about the
nature of the error, for simplicity. On the other hand, it prints
which switch was problematic. Before:
fatal: BUG: dashless options can't be long
After:
error: BUG: switch '(' uses feature not supported for dashless options
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The PARSE_OPT_LASTARG_DEFAULT flag is meant for options like
--contains that (1) traditionally had a mandatory argument and
(2) have some better behavior to use when appearing in the final
position. It makes no sense to combine this with OPTARG, so ever
since v1.6.4-rc0~71 (parse-options: add parse_options_check to
validate option specs, 2009-07-09) this mistake is flagged with
error: `--option` uses incompatible flags LASTARG_DEFAULT and OPTARG
and an exit status representing an error in commandline usage.
Unfortunately that which might confuse scripters calling such an
erroneous program into thinking the _script_ contains an error.
Clarify that it is an internal error by dying with a message beginning
"error: BUG: ..." and status 128.
While at it, clean up parse_options_check to prepare for more checks.
Long term, it would be nicer to make such checks happen at compile
time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_options_check() is being called for each invocation of
parse_options_step which can be quite a bit for some commands. The
commit introducing this function cb9d398 (parse-options: add
parse_options_check to validate option specs., 2009-06-09) had the
correct motivation and explicitly states that parse_options_check()
should be called from parse_options_start(). However, the implementation
differs from the motivation. Fix it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
9c7304e (print the usage string on stdout instead of stderr,
2010-05-17) broke rev-parse --parseopt: when run with -h, the usage
notice on stdout ended up in the shell eval.
Wrap the usage in a cat <<\EOF ... EOF block when printing to stdout.
I do not expect any usage lines to ever start with EOF so this
shouldn't be an undue burden.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When -h is used, print usage messages on stdout. If a command is invoked with
wrong arguments then print the usage messages on stderr.
Signed-off-by: Giuseppe Scrivano <gscrivano@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git-branch, git-show-branch, git-grep, and all the diff-based
programs accept an optional argument <when> for --color. The argument
is a colorbool: "always", "never", or "auto". If no argument is given,
"always" is used; --no-color is an alias for --color=never. This makes
the command-line interface consistent with other GNU tools, such as `ls'
and `grep', and with the git-config color options. Note that, without
an argument, --color and --no-color work exactly as before.
To implement this, two internal changes were made:
1. Allow the first argument of git_config_colorbool() to be NULL,
in which case it returns -1 if the argument isn't "always", "never",
or "auto".
2. Add OPT_COLOR_FLAG(), OPT__COLOR(), and parse_opt_color_flag_cb()
to the option parsing library. The callback uses
git_config_colorbool(), so color.h is now a dependency
of parse-options.c.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/symbol-static:
date.c: mark file-local function static
Replace parse_blob() with an explanatory comment
symlinks.c: remove unused functions
object.c: remove unused functions
strbuf.c: remove unused function
sha1_file.c: remove unused function
mailmap.c: remove unused function
utf8.c: mark file-local function static
submodule.c: mark file-local function static
quote.c: mark file-local function static
remote-curl.c: mark file-local function static
read-cache.c: mark file-local functions static
parse-options.c: mark file-local function static
entry.c: mark file-local function static
http.c: mark file-local functions static
pretty.c: mark file-local function static
builtin-rev-list.c: mark file-local function static
bisect.c: mark file-local function static
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a command line option to override rerere.autoupdate configuration
variable to make it more useful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_long_opt always matches both --opt and --no-opt for any option
"opt", and only get_value checks whether --no-opt is actually valid.
Since the options for git branch contains both "no-merged" and "merged"
there are two matches for --no-merge, but no exact match. With this
patch the negation of a NONEG option is rejected earlier, but it changes
the error message from "option `no-opt' isn't available" to "unknown
option `no-opt'".
[jk: added test]
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
|
|
It is usually better to have positive options, to avoid confusing double
negations. However, sometimes it is desirable to show the negative option
in the help.
Introduce the flag PARSE_OPT_NEGHELP to do that.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/parse-options-integer:
parse-options: simplify usage argh handling
parse-options: make OPT_INTEGER's argh explicit
|
Jeff King
Pranit Bauva
René Scharfe
Charles Bailey
Junio C Hamano
Marat Radchenko
Rohit Mani
Christian Couder
Erik Faye-Lund
Jiang Xin
Torsten Bögershausen
Nguyễn Thái Ngọc Duy
René Scharfe
Dmitry Ivankov
Stephen Boyd
Jonathan Nieder
Thomas Rast
Giuseppe Scrivano
Mark Lodato
Andreas Schwab
Johannes Schindelin
Linus Torvalds