| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In load_idx(), we check that the .idx file is sized appropriately for
the number of objects it claims to have. We recently fixed the case
where the number of objects caused our expected size to overflow a
32-bit unsigned int, and we switched to size_t.
On a 64-bit system, this is fine; our size_t covers any expected size.
On a 32-bit system, though, it won't. The file may claim to have 2^31
objects, which will overflow even a size_t.
This doesn't hurt us at all for a well-formed idx file. A 32-bit system
would already have failed to mmap such a file, since it would be too
big. But an .idx file which _claims_ to have 2^31 objects but is
actually much smaller would fool our check.
This is a broken file, and for the most part we don't care that much
what happens. But:
- it's a little friendlier to notice up front "woah, this file is
broken" than it is to get nonsense results
- later access of the data assumes that the loading function
sanity-checked that we have at least enough bytes for the regular
object-id table. A malformed .idx file could lead to an
out-of-bounds read.
So let's use our overflow-checking functions to make sure that we're not
fooled by a malformed file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We sometimes store the offset into a pack .idx file as an "unsigned
long", but the mmap'd size of a pack .idx file can exceed 4GB. This is
sufficient on LP64 systems like Linux, but will be too small on LLP64
systems like Windows, where "unsigned long" is still only 32 bits. Let's
use size_t, which is a better type for an offset into a memory buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A pack and its matching .idx file are limited to 2^32 objects, because
the pack format contains a 32-bit field to store the number of objects.
Hence we use uint32_t in the code.
But the byte count of even a .idx file can be much larger than that,
because it stores at least a hash and an offset for each object. So
using SHA-1, a v2 .idx file will cross the 4GB boundary at 153,391,650
objects. This confuses load_idx(), which computes the minimum size like
this:
unsigned long min_size = 8 + 4*256 + nr*(hashsz + 4 + 4) + hashsz + hashsz;
Even though min_size will be big enough on most 64-bit platforms, the
actual arithmetic is done as a uint32_t, resulting in a truncation. We
actually exceed that min_size, but then we do:
unsigned long max_size = min_size;
if (nr)
max_size += (nr - 1)*8;
to account for the variable-sized table. That computation doesn't
overflow quite so low, but with the truncation for min_size, we end up
with a max_size that is much smaller than our actual size. So we
complain that the idx is invalid, and can't find any of its objects.
We can fix this case by casting "nr" to a size_t, which will do the
multiplication in 64-bits (assuming you're on a 64-bit platform; this
will never work on a 32-bit system since we couldn't map the whole .idx
anyway). Likewise, we don't have to worry about further additions,
because adding a smaller number to a size_t will convert the other side
to a size_t.
A few notes:
- obviously we could just declare "nr" as a size_t in the first place
(and likewise, packed_git.num_objects). But it's conceptually a
uint32_t because of the on-disk format, and we correctly treat it
that way in other contexts that don't need to compute byte offsets
(e.g., iterating over the set of objects should and generally does
use a uint32_t). Switching to size_t would make all of those other
cases look wrong.
- it could be argued that the proper type is off_t to represent the
file offset. But in practice the .idx file must fit within memory,
because we mmap the whole thing. And the rest of the code (including
the idx_size variable we're comparing against) uses size_t.
- we'll add the same cast to the max_size arithmetic line. Even though
we're adding to a larger type, which will convert our result, the
multiplication is still done as a 32-bit value and can itself
overflow. I didn't check this with my test case, since it would need
an even larger pack (~530M objects), but looking at compiler output
shows that it works this way. The standard should agree, but I
couldn't find anything explicit in 6.3.1.8 ("usual arithmetic
conversions").
The case in load_idx() was the most immediate one that I was able to
trigger. After fixing it, looking up actual objects (including the very
last one in sha1 order) works in a test repo with 153,725,110 objects.
That's because bsearch_hash() works with uint32_t entry indices, and the
actual byte access:
int cmp = hashcmp(table + mi * stride, sha1);
is done with "stride" as a size_t, causing the uint32_t "mi" to be
promoted to a size_t. This is the way most code will access the index
data.
However, I audited all of the other byte-wise accesses of
packed_git.index_data, and many of the others are suspect (they are
similar to the max_size one, where we are adding to a properly sized
offset or directly to a pointer, but the multiplication in the
sub-expression can overflow). I didn't trigger any of these in practice,
but I believe they're potential problems, and certainly adding in the
cast is not going to hurt anything here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A race that leads to an access to a free'd data was corrected in
the codepath that reads pack files.
* mt/delta-base-cache-races:
packfile: fix memory leak in add_delta_base_cache()
packfile: fix race condition on unpack_entry()
|
|
When add_delta_base_cache() is called with a base that is already in the
cache, no operation is performed. But the check is done after allocating
space for a new entry, so we end up leaking memory on the early return.
In addition, the caller never free()'s the base as it expects the
function to take ownership of it. But the base is not released when we
skip insertion, so it also gets leaked. To fix these problems, move the
allocation of a new entry further down in add_delta_base_cache(), and
free() the base on early return.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The third phase of unpack_entry() performs the following sequence in a
loop, until all the deltas enumerated in phase one are applied and the
entry is fully reconstructed:
1. Add the current base entry to the delta base cache
2. Unpack the next delta
3. Patch the unpacked delta on top of the base
When the optional object reading lock is enabled, the above steps will
be performed while holding the lock. However, step 2. momentarily
releases it so that inflation can be performed in parallel for increased
performance. Because the `base` buffer inserted in the cache at 1. is
not duplicated, another thread can potentially free() it while the lock
is released at 2. (e.g. when there is no space left in the cache to
insert another entry). In this case, the later attempt to dereference
`base` at 3. will cause a segmentation fault. This problem was observed
during a multithreaded git-grep execution on a repository with large
objects.
To fix the race condition (and later segmentation fault), let's reorder
the aforementioned steps so that `base` is only added to the cache at
the end. This will prevent the buffer from being released by another
thread while it is still in use. An alternative solution which would not
require the reordering would be to duplicate `base` before inserting it
in the cache. However, as Phil Hord mentioned, memcpy()'ing large bases
can negatively affect performance: in his experiments, this alternative
approach slowed git-grep down by 10% to 20%.
Reported-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a logic to estimate how many objects are in the
repository, which is mean to run once per process invocation, but
it ran every time the estimated value was requested.
* jk/dont-count-existing-objects-twice:
packfile: actually set approximate_object_count_valid
|
|
The approximate_object_count() function tries to compute the count only
once per process. But ever since it was introduced in 8e3f52d778
(find_unique_abbrev: move logic out of get_short_sha1(), 2016-10-03), we
failed to actually set the "valid" flag, meaning we'd compute it fresh
on every call.
This turns out not to be _too_ bad, because we're only iterating through
the packed_git list, and not making any system calls. But since it may
get called for every abbreviated hash we output, even this can add up if
you have many packs.
Here are before-and-after timings for a new perf test which just asks
rev-list to abbreviate each commit hash (the test repo is linux.git,
with commit-graphs):
Test origin HEAD
----------------------------------------------------------------------------
5303.3: rev-list (1) 28.91(28.46+0.44) 29.03(28.65+0.38) +0.4%
5303.4: abbrev-commit (1) 1.18(1.06+0.11) 1.17(1.02+0.14) -0.8%
5303.7: rev-list (50) 28.95(28.56+0.38) 29.50(29.17+0.32) +1.9%
5303.8: abbrev-commit (50) 3.67(3.56+0.10) 3.57(3.42+0.15) -2.7%
5303.11: rev-list (1000) 30.34(29.89+0.43) 30.82(30.35+0.46) +1.6%
5303.12: abbrev-commit (1000) 86.82(86.52+0.29) 77.82(77.59+0.22) -10.4%
5303.15: load 10,000 packs 0.08(0.02+0.05) 0.08(0.02+0.06) +0.0%
It doesn't help at all when we have 1 pack (5303.4), but we get a 10%
speedup when there are 1000 packs (5303.12). That's a modest speedup for
a case that's already slow and we'd hope to avoid in general (note how
slow it is even after, because we have to look in each of those packs
for abbreviations). But it's a one-line change that clearly matches the
original intent, so it seems worth doing.
The included perf test may also be useful for keeping an eye on any
regressions in the overall abbreviation code.
Reported-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a repository has an alternate object directory configured, callers
can traverse through each alternate's MIDX by walking the '->next'
pointer.
But, when 'prepare_multi_pack_index_one()' loads multiple MIDXs, it
places the new ones at the front of this pointer chain, not at the end.
This can be confusing for callers such as 'git repack -ad', causing test
failures like in t7700.6 with 'GIT_TEST_MULTI_PACK_INDEX=1'.
The occurs when dropping a pack known to the local MIDX with alternates
configured that have their own MIDX. Since the alternate's MIDX is
returned via 'get_multi_pack_index()', 'midx_contains_pack()' returns
true (which is correct, since it traverses through the '->next' pointer
to find the MIDX in the chain that does contain the requested object).
But, we call 'clear_midx_file()' on 'the_repository', which drops the
MIDX at the path of the first MIDX in the chain, which (in the case of
t7700.6 is the one in the alternate).
This patch addresses that by:
- placing the local MIDX first in the chain when calling
'prepare_multi_pack_index_one()', and
- introducing a new 'get_local_multi_pack_index()', which explicitly
returns the repository-local MIDX, if any.
Don't impose an additional order on the MIDX's '->next' pointer beyond
that the first item in the chain must be local if one exists so that we
avoid a quadratic insertion.
Likewise, use 'get_local_multi_pack_index()' in
'remove_redundant_pack()' to fix the formerly broken t7700.6 when run
with 'GIT_TEST_MULTI_PACK_INDEX=1'.
Finally, note that the MIDX ordering invariant is only preserved by the
insertion order in 'prepare_packed_git()', which traverses through the
ODB's '->next' pointer, meaning we visit the local object store first.
This fragility makes this an undesirable long-term solution if more
callers are added, but it is acceptable for now since this is the only
caller.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both v2 pack index files and the v3 format specified as part of the
NewHash work have similar data starting at the CRC table. Much of the
existing code wants to read either this table or the offset entries
following it, and in doing so computes the offset each time.
In order to share as much code between v2 and v3, compute the offset of
the CRC table and store it when the pack is opened. Use this value to
compute offsets to not only the CRC table, but to the offset entries
beyond it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time, nth_packed_object_sha1() was the primary way to get
the oid of a packfile's index position. But these days we have the more
type-safe nth_packed_object_id() wrapper, and all callers have been
converted.
Let's drop the "sha1" version (turning the safer wrapper into a single
function) so that nobody is tempted to introduce new callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit changed the public interface of packed_object_info()
to return a struct object_id rather than a bare hash. That enables us to
convert our internal helper, as well. We can use nth_packed_object_id()
directly for OFS_DELTA, but we'll still have to use oidread() to pull
the hash for a REF_DELTA out of the packfile.
There should be no additional cost, since we're copying directly into
the object_id the caller provided us (just as we did before; it's just
happening now via nth_packed_object_id()).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a caller sets the object_info.delta_base_sha1 to a non-NULL pointer,
we'll write the oid of the object's delta base to it. But we can
increase our type safety by switching this to a real object_id struct.
All of our callers are just pointing into the hash member of an
object_id anyway, so there's no inconvenience.
Note that we do still keep it as a pointer-to-struct, because the NULL
sentinel value tells us whether the caller is even interested in the
information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our nth_packed_object_sha1() function returns NULL for error. So when we
wrapped it with nth_packed_object_oid(), we kept the same semantics. But
it's a bit funny, because the caller actually passes in an out
parameter, and the pointer we return is just that same struct they
passed to us (or NULL).
It's not too terrible, but it does make the interface a little
non-idiomatic. Let's switch to our usual "0 for success, negative for
error" return value. Most callers either don't check it, or are
trivially converted. The one that requires the biggest change is
actually improved, as we can ditch an extra aliased pointer variable.
Since we are changing the interface in a subtle way that the compiler
wouldn't catch, let's also change the name to catch any topics in
flight. We can drop the 'o' and make it nth_packed_object_id(). That's
slightly shorter, but also less redundant since the 'o' stands for
"object" already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, we avoided threaded grep while searching in objects
(as opposed to files in the working tree) as accesses to the object
layer is not thread-safe. This limitation is getting lifted.
* mt/threaded-grep-in-object-store:
grep: use no. of cores as the default no. of threads
grep: move driver pre-load out of critical section
grep: re-enable threads in non-worktree case
grep: protect packed_git [re-]initialization
grep: allow submodule functions to run in parallel
submodule-config: add skip_if_read option to repo_read_gitmodules()
grep: replace grep_read_mutex by internal obj read lock
object-store: allow threaded access to object reading
replace-object: make replace operations thread-safe
grep: fix racy calls in grep_objects()
grep: fix race conditions at grep_submodule()
grep: fix race conditions on userdiff calls
|
|
The way "git pack-objects" reuses objects stored in existing pack
to generate its result has been improved.
* jk/packfile-reuse-cleanup:
pack-bitmap: don't rely on bitmap_git->reuse_objects
pack-objects: add checks for duplicate objects
pack-objects: improve partial packfile reuse
builtin/pack-objects: introduce obj_is_packed()
pack-objects: introduce pack.allowPackReuse
csum-file: introduce hashfile_total()
pack-bitmap: simplify bitmap_has_oid_in_uninteresting()
pack-bitmap: uninteresting oid can be outside bitmapped packfile
pack-bitmap: introduce bitmap_walk_contains()
ewah/bitmap: introduce bitmap_word_alloc()
packfile: expose get_delta_base()
builtin/pack-objects: report reused packfile objects
|
|
Some fields in struct raw_object_store are lazy initialized by the
thread-unsafe packfile.c:prepare_packed_git(). Although this function is
present in the call stack of git-grep threads, all paths to it are
currently protected by obj_read_lock() (and the main thread usually
indirectly calls it before firing the worker threads, anyway). However,
it's possible that future modifications add new unprotected paths to it,
introducing a race condition. Because errors derived from it wouldn't
happen often, it could be hard to detect. So to prevent future
headaches, let's force eager initialization of packed_git when setting
git-grep up. There'll be a small overhead in the cases where we didn't
really need to prepare packed_git during execution but this shouldn't be
very noticeable.
Also, packed_git may be re-initialized by
packfile.c:reprepare_packed_git(). Again, all paths to it in git-grep
are already protected by obj_read_lock() but it may suffer from the same
problem in the future. So let's also internally protect it with
obj_read_lock() (which is a recursive mutex).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow object reading to be performed by multiple threads protecting it
with an internal lock, the obj_read_mutex. The lock usage can be toggled
with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the
functions which can be safely called in parallel are:
read_object_file_extended(), repo_read_object_file(),
read_object_file(), read_object_with_reference(), read_object(),
oid_object_info() and oid_object_info_extended(). It's also possible
to use obj_read_lock() and obj_read_unlock() to protect other sections
that cannot execute in parallel with object reading.
Probably there are many spots in the functions listed above that could
be executed unlocked (and thus, in parallel). But, for now, we are most
interested in allowing parallel access to zlib inflation. This is one of
the sections where object reading spends most of the time in (e.g. up to
one-third of git-grep's execution time in the chromium repo corresponds
to inflation) and it's already thread-safe. So, to take advantage of
that, the obj_read_mutex is released when calling git_inflate() and
re-acquired right after, for every calling spot in
oid_object_info_extended()'s call chain. We may refine this lock to also
exploit other possible parallel spots in the future, but for now,
threaded zlib inflation should already give great speedups for threaded
object reading callers.
Note that add_delta_base_cache() was also modified to skip adding
already present entries to the cache. This wasn't possible before, but
it would be now, with the parallel inflation. Take for example the
following situation, where two threads - A and B - are executing the
code at unpack_entry():
1. Thread A is performing the decompression of a base O (which is not
yet in the cache) at PHASE II. Thread B is simultaneously trying to
unpack O, but just starting at PHASE I.
2. Since O is not yet in the cache, B will go to PHASE II to also
perform the decompression.
3. When they finish decompressing, one of them will get the object
reading mutex and go to PHASE III while the other waits for the
mutex. Let’s say A got the mutex first.
4. Thread A will add O to the cache, go throughout the rest of PHASE III
and return.
5. Thread B gets the mutex, also add O to the cache (if the check wasn't
there) and returns.
Finally, it is also important to highlight that the object reading lock
can only ensure thread-safety in the mentioned functions thanks to two
complementary mechanisms: the use of 'struct raw_object_store's
replace_mutex, which guards sections in the object reading machinery
that would otherwise be thread-unsafe; and the 'struct pack_window's
inuse_cnt, which protects window reading operations (such as the one
performed during the inflation of a packed object), allowing them to
execute without the acquisition of the obj_read_mutex.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ew/packfile-syscall-optim:
packfile: replace lseek+read with pread
packfile: remove redundant fcntl F_GETFD/F_SETFD
|
|
We already have pread emulation for portability, so there's
there's no reason to make two syscalls where one suffices.
Furthermore, readers of the packfile will be using mmap
(or pread to emulate mmap), anyways, so the file description
offset does not matter in this case.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_open sets close-on-exec since cd66ada06588f797
("sha1_file: open window into packfiles with O_CLOEXEC").
There's no reason to keep using fcntl to set the close-on-exec
flag, anymore.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When loading packfiles on start-up, we traverse the internal packfile
list once per file to avoid reloading packfiles that have already
been loaded. This check runs in quadratic time, so for poorly
maintained repos with a large number of packfiles, it can be pretty
slow.
Add a hashmap containing the packfile names as we load them so that
the average runtime cost of checking for already-loaded packs becomes
constant.
Add a perf test to p5303 to show speed-up.
The existing p5303 test runtimes are dominated by other factors and do
not show an appreciable speed-up. The new test in p5303 clearly exposes
a speed-up in bad cases. In this test we create 10,000 packfiles and
measure the start-up time of git rev-parse, which does little else
besides load in the packs.
Here are the numbers for the new p5303 test:
Test HEAD^ HEAD
---------------------------------------------------------------------
5303.12: load 10,000 packs 1.03(0.92+0.10) 0.12(0.02+0.09) -88.3%
Signed-off-by: Colin Stolley <cstolley@runbox.com>
Helped-by: Jeff King <peff@peff.net>
[jc: squashed the change to call hashmap in install_packed_git() by peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up of the hashmap API, both users and implementation.
* ew/hashmap:
hashmap_entry: remove first member requirement from docs
hashmap: remove type arg from hashmap_{get,put,remove}_entry
OFFSETOF_VAR macro to simplify hashmap iterators
hashmap: introduce hashmap_free_entries
hashmap: hashmap_{put,remove} return hashmap_entry *
hashmap: use *_entry APIs for iteration
hashmap_cmp_fn takes hashmap_entry params
hashmap_get{,_from_hash} return "struct hashmap_entry *"
hashmap: use *_entry APIs to wrap container_of
hashmap_get_next returns "struct hashmap_entry *"
introduce container_of macro
hashmap_put takes "struct hashmap_entry *"
hashmap_remove takes "const struct hashmap_entry *"
hashmap_get takes "const struct hashmap_entry *"
hashmap_add takes "struct hashmap_entry *"
hashmap_get_next takes "const struct hashmap_entry *"
hashmap_entry_init takes "struct hashmap_entry *"
packfile: use hashmap_entry in delta_base_cache_entry
coccicheck: detect hashmap_entry.hash assignment
diff: use hashmap_entry_init on moved_entry.ent
|
|
Code cleanup.
* rs/dedup-includes:
treewide: remove duplicate #include directives
|
|
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
|
|
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hashmap_entry_init function is intended to take a
hashmap_entry struct pointer, not a hashmap struct pointer.
This was not noticed because hashmap_entry_init takes a "void *"
arg instead of "struct hashmap_entry *", and the hashmap struct
is larger and can be cast into a hashmap_entry struct without
data corruption.
This has the beneficial side effect of reducing the size of
a delta_base_cache_entry from 104 bytes to 72 bytes on 64-bit
systems.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/get-tagged-oid:
use get_tagged_oid()
tag: factor out get_tagged_oid()
|
|
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
|
|
In a following commit get_delta_base() will be used outside
packfile.c, so let's make it non static and declare it in
packfile.h.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid derefencing ->tagged without checking for NULL by using the
convenience wrapper for getting the ID of the tagged object. It die()s
when encountering a broken tag instead of segfaulting.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace a use of sha1_to_hex with hash_to_hex so that this code works
with a hash algorithm other than SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago, in 97bfeb34df (Release pack windows before reporting out of
memory., 2006-12-24), we taught xmalloc() and friends to try unmapping
pack windows when malloc() failed. It's unlikely that his helps a lot in
practice, and it has some downsides. First, the downsides:
1. It makes xmalloc() not thread-safe. We've worked around this in
pack-objects.c, which installs its own locking version of the
try_to_free_routine(). But other threaded code doesn't.
2. It makes the system as a whole harder to reason about. Functions
which allocate heap memory under the hood may have farther-reaching
effects than expected.
That might be worth the tradeoff if there's a benefit. But in practice,
it seems unlikely. We're generally dealing with mmap'd files, so the OS
is going to do a much better job at responding to memory pressure by
dropping individual pages (the exception is systems with NO_MMAP, but
even there the OS can probably respond just as well with swapping).
So the only thing we're really freeing is address space. On 64-bit
systems, we have plenty of that to go around. On 32-bit systems, it
could possibly help. But around the same time we made two other changes:
77ccc5bbd1 (Introduce new config option for mmap limit., 2006-12-23) and
60bb8b1453 (Fully activate the sliding window pack access., 2006-12-23).
Together that means that a 32-bit system should have no more than 256MB
total of packed-git mmaps at one time, split between a few 32MB windows.
It's unlikely we have any address space problems since then, but we
don't have any data since the features were all added at the same time.
Likewise, xmmap() will try to free memory. At first glance, it seems
like we'd need this (when we try to mmap a new window, we might need to
close an old one to save address space on a 32-bit system). But we're
saved again by core.packedGitLimit: if we're going to exceed our 256MB
limit, we'll close an existing window before we even call mmap().
So it seems unlikely that this feature is actually doing anything
useful. And while we don't have reports of it harming anything (probably
because it rarely if ever kicks in), it would be nice to simplify the
system overall. This patch drops the whole try_to_free system from
xmalloc(), as well as the manual pack memory release in xmmap().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
|
|
Code clean-up.
* rs/copy-array:
use COPY_ARRAY for copying arrays
coccinelle: use COPY_ARRAY for copying arrays
|
|
The ownership rule for the file descriptor to fast-import remote
backend was mixed up, leading to unrelated file descriptor getting
closed, which has been fixed.
* mh/import-transport-fd-fix:
Use xmmap_gently instead of xmmap in use_pack
dup() the input fd for fast-import used for remote helpers
|
|
"git multi-pack-index" learned expire and repack subcommands.
* ds/midx-expire-repack:
t5319: use 'test-tool path-utils' instead of 'ls -l'
t5319-multi-pack-index.sh: test batch size zero
midx: add test that 'expire' respects .keep files
multi-pack-index: test expire while adding packs
midx: implement midx_repack()
multi-pack-index: prepare 'repack' subcommand
multi-pack-index: implement 'expire' subcommand
midx: refactor permutation logic and pack sorting
midx: simplify computation of pack name lengths
multi-pack-index: prepare for 'expire' subcommand
Docs: rearrange subcommands for multi-pack-index
repack: refactor pack deletion for future use
|
|
Code clean-up.
* rs/copy-array:
use COPY_ARRAY for copying arrays
coccinelle: use COPY_ARRAY for copying arrays
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
|
|
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert calls of memcpy(3) to use COPY_ARRAY, which shortens and
simplifies the code a bit.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ownership rule for the file descriptor to fast-import remote
backend was mixed up, leading to unrelated file descriptor getting
closed, which has been fixed.
* mh/import-transport-fd-fix:
Use xmmap_gently instead of xmmap in use_pack
dup() the input fd for fast-import used for remote helpers
|
|
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The close_all_packs() method is used to close all read handles to
pack-files and the multi-pack-index before running 'git gc --auto'.
This is particularly important on the Windows platform, where read
handles block any writes to those files. Replacing one of these
files with a rename() will fail in this situation.
The commit-graph also performs a rename, so is susceptable to this
problem. We are careful to close the commit-graph before writing,
but that doesn't work when a 'git fetch' (or similar) process runs
'git gc --auto' which may write a commit-graph.
Here, close the commit-graph as part of close_all_packs().
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The repack builtin deletes redundant pack-files and their
associated .idx, .promisor, .bitmap, and .keep files. We will want
to re-use this logic in the future for other types of repack, so
pull the logic into 'unlink_pack_path()' in packfile.c.
The 'ignore_keep' parameter is enabled for the use in repack, but
will be important for a future caller.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Matheus Tavares
Taylor Blau
brian m. carlson
Eric Wong
Colin Stolley
René Scharfe
Christian Couder
Derrick Stolee