| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A pack v2 .idx file usually records offset using 64-bit representation
only when the offset does not fit within 31-bit, but you can handcraft
your .idx file to record smaller offset using 64-bit, storing all zero
in the upper 4-byte. By inspecting the original idx file when running
index-pack --verify, encode such low offsets that do not need to be in
64-bit but are encoded using 64-bit just like the original idx file so
that we can still validate the pack/idx pair by comparing the idx file
recomputed with the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given an existing .pack file and the .idx file that describes it,
this new mode of operation reads and re-index the packfile and makes
sure the existing .idx file matches the result byte-for-byte.
All the objects in the .pack file are validated during this operation as
well. Unlike verify-pack, which visits each object described in the .idx
file in the SHA-1 order, index-pack efficiently exploits the delta-chain
to avoid rebuilding the objects that are used as the base of deltified
objects over and over again while validating the objects, resulting in
much quicker verification of the .pack file and its .idx file.
This version however cannot verify a .pack/.idx pair with a handcrafted v2
index that uses 64-bit offset representation for offsets that would fit
within 31-bit. You can create such an .idx file by giving a custom offset
to --index-version option to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Adjust all callers to the API change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 1b22b6c897 made duplicated versions of encode_header() into a
common version called encode_in_pack_object_header(). There is however
a better location that sha1_file.c for such a function though, as
sha1_file.c contains nothing related to the creation of packs, and
it is quite populated already.
Also the comment that was moved to the header file should really remain
near the function as it covers implementation details and provides no
information about the actual function interface.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This required some fairly trivial packfile function 'const' cleanup,
since the builtin commands get a const char *argv[] array.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-1.6.0-pack-directory:
Make sure objects/pack exists before creating a new pack
|
|
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On ARM I have the following compilation errors:
CC fast-import.o
In file included from cache.h:8,
from builtin.h:6,
from fast-import.c:142:
arm/sha1.h:14: error: conflicting types for 'SHA_CTX'
/usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here
arm/sha1.h:16: error: conflicting types for 'SHA1_Init'
/usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here
arm/sha1.h:17: error: conflicting types for 'SHA1_Update'
/usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here
arm/sha1.h:18: error: conflicting types for 'SHA1_Final'
/usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here
make: *** [fast-import.o] Error 1
This is because openssl header files are always included in
git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not
set, which somehow brings in <openssl/sha1.h> clashing with the custom
ARM version. Compilation of git is probably broken on PPC too for the
same reason.
Turns out that the only file requiring openssl/ssl.h and openssl/err.h
is imap-send.c. But only moving those problematic includes there
doesn't solve the issue as it also includes cache.h which brings in the
conflicting local SHA1 header file.
As suggested by Jeff King, the best solution is to rename our references
to SHA1 functions and structure to something git specific, and define those
according to the implementation used.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
A comment on top of create_tmpfile() describes caveats ('can have
problems on various systems (FAT, NFS, Coda)') that should apply
in this situation as well. This in the end did not end up solving
any of my personal problems, but it might be a useful cleanup patch
nevertheless.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It should be more efficient to use nicely aligned buffer sizes, either
for filesystem operations or SHA1 checksums. Also, using a relatively
small nominal size might allow for the data to remain in L1 cache
between both SHA1_Update() calls.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, this function has the potential to read corrupted pack data
from disk and give it a valid SHA1 checksum. Let's add the ability to
validate SHA1 checksum of existing data along the way, including before
and after any arbitrary point in the pack.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The index-pack command, when processing a thin pack, fixed up the pack
after-the-fact. It forgets to fsync the result, because it only did that
in one path rather in all cases of fixup.
This moves the fsync_or_die() to the fix-up routine itself, rather than
doing it in one of the callers, so that all cases are covered.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As announced for 1.6.0.
Git older than version 1.5.2 (or any other git version with this option
set to 1) may revert to version 1 of the pack index by manually deleting
all .idx files and recreating them using 'git index-pack'. Communication
over the git native protocol is unaffected since the pack index is never
transferred.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This means that we can depend on packs always being stable on disk,
simplifying a lot of the object serialization worries. And unlike loose
objects, serializing pack creation IO isn't going to be a performance
killer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* np/progress:
Show total transferred as part of throughput progress
make sure throughput display gets updated even if progress doesn't move
return the prune-packed progress display to the inner loop
add throughput display to git-push
add some copyright notice to the progress display code
add throughput display to index-pack
add throughput to progress display
relax usage of the progress API
make struct progress an opaque type
prune-packed: don't call display_progress() for every file
Stop displaying "Pack pack-$ID created." during git-gc
Teach prune-packed to use the standard progress meter
Change 'Deltifying objects' to 'Compressing objects'
fix for more minor memory leaks
fix const issues with some functions
pack-objects.c: fix some global variable abuse and memory leaks
pack-objects: no delta possible with only one object in the list
cope with multiple line breaks within sideband progress messages
more compact progress display
|
|
Two functions, namely write_idx_file() and open_pack_file(), currently
return a const pointer. However that pointer is either a copy of the
first argument, or set to a malloc'd buffer when that first argument
is null. In the later case it is wrong to qualify that pointer as const
since ownership of the buffer is transferred to the caller to dispose of,
and obviously the free() function is not meant to be passed const
pointers.
Making the return pointer not const causes a warning when the first
argument is returned since that argument is also marked const.
The correct thing to do is therefore to remove the const qualifiers,
avoiding the need for ugly casts only to silence some warnings.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
There is a subtle (but important) linkage between receive-pack and
index-pack that allows index-pack to create a packfile but protect
it from being deleted by a concurrent `git repack -a -d` operation.
The linkage works by having index-pack mark the newly created pack
with a ".keep" file and then it passes the SHA-1 name of that new
packfile to receive-pack along its stdout channel.
The receive-pack process must unkeep the packfile by deleting the
.keep file, but can it can only do so after all elgible refs have
been updated in the receiving repository. This ensures that the
packfile is either kept or its objects are reachable, preventing
a concurrent repacker from deleting the packfile before it can
determine that its objects are actually needed by the repository.
The new builtin-fetch code needs to perform the same actions if
it choose to run index-pack rather than unpack-objects, so I am
moving this code out to its own function where both receive-pack
and fetch-pack are able to invoke it when necessary. The caller
is responsible for deleting the returned ".keep" and freeing the
path if the returned path is not NULL.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xmkstemp() performs error checking and prints a standard error message when
an error occur.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch unifies the write_index_file functions in
builtin-pack-objects.c and index-pack.c. As the name
"index" is overloaded in git, move in the direction of
using "idx" and "pack idx" when refering to the pack index.
There should be no change in functionality.
Signed-off-by: Geert Bosch <bosch@gnat.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The return value from xread() is ssize_t.
Paolo Teti <paolo.teti@gmail.com> pointed out that in this case, the
signed return value was assigned to an unsigned type (size_t). This patch
fixes that.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Include a generalized fixup_pack_header_footer() in this new file.
Needed by git-repack --max-pack-size feature in a later patchset.
[sp: Moved close(pack_fd) to callers, to support index-pack, and
changed name to better indicate it is for packfiles.]
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Junio C Hamano
Nicolas Pitre
Linus Torvalds
Thomas Rast
Nicolas Pitre
Petr Baudis
Heikki Orsila
Shawn O. Pearce
Luiz Fernando N. Capitulino
Geert Bosch
Johan Herland
Dana L. How