| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code cleanup to use "struct object_id" more by replacing use of
"char *sha1"
* jk/nth-packed-object-id:
packfile: drop nth_packed_object_sha1()
packed_object_info(): use object_id internally for delta base
packed_object_info(): use object_id for returning delta base
pack-check: push oid lookup into loop
pack-check: convert "internal error" die to a BUG()
pack-bitmap: use object_id when loading on-disk bitmaps
pack-objects: use object_id struct in pack-reuse code
pack-objects: convert oe_set_delta_ext() to use object_id
pack-objects: read delta base oid into object_id struct
nth_packed_object_oid(): use customary integer return
|
|
The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
|
|
A pack bitmap file contains the index position of the commit for each
bitmap, which we then translate into an object id via
nth_packed_object_sha1(). In preparation for that function going away,
we can switch to the more type-safe nth_packed_object_id().
Note that even though the result ends up in an object_id this does incur
an extra copy of the hash (into our temporary object_id, and then into
the final malloc'd stored_bitmap struct). This shouldn't make any
measurable difference. If it did, we could avoid this copy _and_ the
copy of the rest of the items by allocating the stored_bitmap struct
beforehand and reading directly into it from the bitmap file. Or better
still, if this is a bottleneck, we could introduce an on-disk index to
the bitmap file so we don't have to read every single entry to use just
one of them. So it's not worth worrying about micro-optimizing out this
one hash copy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our nth_packed_object_sha1() function returns NULL for error. So when we
wrapped it with nth_packed_object_oid(), we kept the same semantics. But
it's a bit funny, because the caller actually passes in an out
parameter, and the pointer we return is just that same struct they
passed to us (or NULL).
It's not too terrible, but it does make the interface a little
non-idiomatic. Let's switch to our usual "0 for success, negative for
error" return value. Most callers either don't check it, or are
trivially converted. The one that requires the biggest change is
actually improved, as we can ditch an extra aliased pointer variable.
Since we are changing the interface in a subtle way that the compiler
wouldn't catch, let's also change the name to catch any topics in
flight. We can drop the 'o' and make it nth_packed_object_id(). That's
slightly shorter, but also less redundant since the 'o' stands for
"object" already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way "git pack-objects" reuses objects stored in existing pack
to generate its result has been improved.
* jk/packfile-reuse-cleanup:
pack-bitmap: don't rely on bitmap_git->reuse_objects
pack-objects: add checks for duplicate objects
pack-objects: improve partial packfile reuse
builtin/pack-objects: introduce obj_is_packed()
pack-objects: introduce pack.allowPackReuse
csum-file: introduce hashfile_total()
pack-bitmap: simplify bitmap_has_oid_in_uninteresting()
pack-bitmap: uninteresting oid can be outside bitmapped packfile
pack-bitmap: introduce bitmap_walk_contains()
ewah/bitmap: introduce bitmap_word_alloc()
packfile: expose get_delta_base()
builtin/pack-objects: report reused packfile objects
|
|
Just as the previous commit implemented BLOB_NONE, we can support
BLOB_LIMIT filters by looking at the sizes of any blobs in the result
and unsetting their bits as appropriate. This is slightly more expensive
than BLOB_NONE, but still produces a noticeable speedup (these results
are on git.git):
Test HEAD~2 HEAD
------------------------------------------------------------------------------------
5310.9: rev-list count with blob:none 1.80(1.77+0.02) 0.22(0.20+0.02) -87.8%
5310.10: rev-list count with blob:limit=1k 1.99(1.96+0.03) 0.29(0.25+0.03) -85.4%
The implementation is similar to the BLOB_NONE one, with the exception
that we have to go object-by-object while walking the blob-type bitmap
(since we can't mask out the matches, but must look up the size
individually for each blob). The trick with using ctz64() is taken from
show_objects_for_type(), which likewise needs to find individual bits
(but wants to quickly skip over big chunks without blobs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can easily support BLOB_NONE filters with bitmaps. Since we know the
types of all of the objects, we just need to clear the result bits of
any blobs.
Note two subtleties in the implementation (which I also called out in
comments):
- we have to include any blobs that were specifically asked for (and
not reached through graph traversal) to match the non-bitmap version
- we have to handle in-pack and "ext_index" objects separately.
Arguably prepare_bitmap_walk() could be adding these ext_index
objects to the type bitmaps. But it doesn't for now, so let's match
the rest of the bitmap code here (it probably wouldn't be an
efficiency improvement to do so since the cost of extending those
bitmaps is about the same as our loop here, but it might make the
code a bit simpler).
Here are perf results for the new test on git.git:
Test HEAD^ HEAD
--------------------------------------------------------------------------------
5310.9: rev-list count with blob:none 1.67(1.62+0.05) 0.22(0.21+0.02) -86.8%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently you can't use object filters with bitmaps, but we plan to
support at least some filters with bitmaps. Let's introduce some
infrastructure that will help us do that:
- prepare_bitmap_walk() now accepts a list_objects_filter_options
parameter (which can be NULL for no filtering; all the current
callers pass this)
- we'll bail early if the filter is incompatible with bitmaps (just as
we would if there were no bitmaps at all). Currently all filters are
incompatible.
- we'll filter the resulting bitmap; since there are no supported
filters yet, this is always a noop.
There should be no behavior change yet, but we'll support some actual
filters in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since we added reachability bitmap support, we've been able to use
it with rev-list to get the full list of objects, like:
git rev-list --objects --use-bitmap-index --all
But you can't do so without --objects, since we weren't ready to just
show the commits. However, the internals of the bitmap code are mostly
ready for this: they avoid opening up trees when walking to fill in the
bitmaps. We just need to actually pass in the rev_info to
traverse_bitmap_commit_list() so it knows which types to bother
triggering our callback for.
For completeness, the perf test now covers both the existing --objects
case, as well as the new commits-only behavior (the objects one got way
faster when we introduced bitmaps, but obviously isn't improved now).
Here are numbers for linux.git:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 8.29(8.10+0.19) 1.76(1.72+0.04) -78.8%
5310.8: rev-list (objects) 8.06(7.94+0.12) 8.14(7.94+0.13) +1.0%
That run was cheating a little, as I didn't have any commit-graph in the
repository, and we'd built it by default these days when running git-gc.
Here are numbers with a commit-graph:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 0.70(0.58+0.12) 0.51(0.46+0.04) -27.1%
5310.8: rev-list (objects) 6.20(6.09+0.10) 6.27(6.16+0.11) +1.1%
Still an improvement, but a lot less impressive.
We could have the perf script remove any commit-graph to show the
out-sized effect, but it probably makes sense to leave it in what would
be a more typical setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rev-list has refused to use bitmaps with pathspec limiting since
c8a70d3509 (rev-list: disable --use-bitmap-index when pruning commits,
2015-07-01). But this is true not just for rev-list, but for anyone who
calls prepare_bitmap_walk(); the code isn't equipped to handle this
case. We never noticed because the only other callers would never pass
a pathspec limiter.
But let's push the check down into prepare_bitmap_walk() anyway. That's
a more logical place for it to live, as callers shouldn't need to know
the details (and must be prepared to fall back to a regular traversal
anyway, since there might not be bitmaps in the repository).
It would also prepare us for a day where this case _is_ handled, but
that's pretty unlikely. E.g., we could use bitmaps to generate the set
of commits, and then diff each commit to see if it matches the pathspec.
That would be slightly faster than a naive traversal that actually walks
the commits. But you'd probably do better still to make use of the newer
commit-graph feature to make walking the commits very cheap.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we do a bitmap-aware revision traversal, we create an object_list
for each of the "haves" and "wants" tips. After creating the result
bitmaps these are no longer needed or used, but we never free the list
memory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When count_object_type() wants to iterate over the bitmap of all objects
of a certain type, we have to pair up OBJ_COMMIT with bitmap->commits,
and so forth. Since we're about to add more code to iterate over these
bitmaps, let's pull the initialization into its own function.
We can also use this to simplify traverse_bitmap_commit_list(). It
accomplishes the same thing by manually passing the object type and the
bitmap to show_objects_for_type(), but using our helper we just need the
object type.
Note there's one small code change here: previously we'd simply return
zero when counting an unknown object type, and now we'll BUG(). This
shouldn't matter in practice, as all of the callers pass in only usual
commit/tree/blob/tag types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We no longer compute bitmap_git->reuse_objects, so we
cannot rely on it anymore to terminate the loop early;
we have to iterate to the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old code to reuse deltas from an existing packfile
just tried to dump a whole segment of the pack verbatim.
That's faster than the traditional way of actually adding
objects to the packing list, but it didn't kick in very
often. This new code is really going for a middle ground:
do _some_ per-object work, but way less than we'd
traditionally do.
The general strategy of the new code is to make a bitmap
of objects from the packfile we'll include, and then
iterate over it, writing out each object exactly as it is
in our on-disk pack, but _not_ adding it to our packlist
(which costs memory, and increases the search space for
deltas).
One complication is that if we're omitting some objects,
we can't set a delta against a base that we're not
sending. So we have to check each object in
try_partial_reuse() to make sure we have its delta.
About performance, in the worst case we might have
interleaved objects that we are sending or not sending,
and we'd have as many chunks as objects. But in practice
we send big chunks.
For instance, packing torvalds/linux on GitHub servers
now reused 6.5M objects, but only needed ~50k chunks.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's refactor bitmap_has_oid_in_uninteresting() using
bitmap_walk_contains().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
bitmap_has_oid_in_uninteresting() only used bitmap_position_packfile(),
not bitmap_position(). So it wouldn't find objects which weren't in the
bitmapped packfile (i.e., ones where we extended the bitmap to handle
loose objects, or objects in other packs).
As we could reuse a delta against such an object it is suboptimal not
to use bitmap_position(), so let's use it instead of
bitmap_position_packfile().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will use this helper function in a following commit to
tell us if an object is packed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various fixes to codepaths gcc 9 had trouble following dataflow.
* jk/misc-uninitialized-fixes:
pack-objects: drop packlist index_pos optimization
test-read-cache: drop namelen variable
diff-delta: set size out-parameter to 0 for NULL delta
bulk-checkin: zero-initialize hashfile_checkpoint
pack-objects: use object_id in packlist_alloc()
git-am: handle missing "author" when parsing commit
|
|
Once upon a time, the code to add an object to our packing list in
pack-objects all lived in a single function. It computed the position
within the hash table once, then used it to check if the object was
already present, and if not, to add it.
Later, in 2834bc27c1 (pack-objects: refactor the packing list,
2013-10-24), this was split into two functions: packlist_find() and
packlist_alloc(). We ended up with an "index_pos" variable that gets
passed through several functions to make it from one to the other.
The resulting code is rather confusing to follow. The "index_pos"
variable is sometimes undefined, if we don't yet have a hash table. This
works out in practice because in that case packlist_alloc() won't use it
at all, since it will have to create/grow the hash table. But it's hard
to verify that, and it does cause gcc 9.2.1's -Wmaybe-uninitialized to
complain when compiled with "-flto -O3" (rightfully, since we do pass
the uninitialized value as a function parameter, even if nobody ends up
using it).
All of this is to save computing the hash index again when we're
inserting into the hash table, which I found doesn't make a measurable
difference in the program runtime (which is not surprising, since we're
doing all kinds of other heavyweight things for each object).
Let's just drop this index_pos variable entirely, simplifying the code
(and pleasing the compiler).
We might be better still refactoring this custom hash table to use one
of our existing implementations (an oidmap, or a kh_oid_map). I stopped
short of that here, but this would be the likely first step towards that
anyway.
Reported-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function for accessing the ID of the object referenced by a tag
safely, i.e. without causing a segfault when encountering a broken tag
where ->tagged is NULL.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the users of our khash_sha1 maps actually have a "struct
object_id". Let's use the more descriptive type.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 5a8643eff1 (khash: move oid hash table definition, 2019-02-19)
added a khash "oid_map" type to match the existing "oid" type, which is
a simple set (i.e., just keys, no values). But in setting up the
khash_oid_map typedef, it accidentally referred to "kh_oid_t", which is
the set type.
Nobody noticed the breakage because there are not yet any callers; the
type was added just as a match to the existing sha1 types (whose map
type confusingly _is_ called khash_sha1, and it has no matching set
type).
We could easily fix this with s/oid/oid_map/ in the typedef. But let's
take this a step further, and just drop the typedef entirely. These
typedefs were added by 5a8643eff1 to match the khash_sha1 typedefs. But
the actual khash-derived type names are descriptive enough; this is just
adding an extra layer of indirection. The khash names do not quite
follow our usual style (e.g., they end in "_t"), but since we end up
using other khash names (e.g., khiter_t, kh_get_oid()) anyway, just
typedef-ing the struct name is not really helping much.
And there are already many cases where we use the raw khash type names
anyway (e.g., the "set" variant defined just above us does not have such
a typedef!).
So let's drop this typedef, and the matching oid_pos one (which actually
_does_ have a user, but we can easily convert it).
We'll leave the khash_sha1 typedef around. The ultimate fate of its
callers should be conversion to kh_oid_map_t, so there's no point in
going through the noise of changing the names now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We take a raw hash pointer, but most of our callers have a "struct
object_id" already. Let's switch to taking the full struct, which will
let us continue removing uses of raw sha1 buffers.
There are two callers that do need special attention:
- in rebuild_existing_bitmaps(), we need to switch to
nth_packed_object_oid(). This incurs an extra hash copy over
pointing straight to the mmap'd sha1, but it shouldn't be measurable
compared to the rest of the operation.
- in can_reuse_delta() we already spent the effort to copy the sha1
into a "struct object_id", but now we just have to do so a little
earlier in the function (we can't easily convert that function's
callers because they may be pointing at mmap'd REF_DELTA blocks).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from unsigned char[20] to struct object_id continues.
* bc/hash-transition-16: (35 commits)
gitweb: make hash size independent
Git.pm: make hash size independent
read-cache: read data in a hash-independent way
dir: make untracked cache extension hash size independent
builtin/difftool: use parse_oid_hex
refspec: make hash size independent
archive: convert struct archiver_args to object_id
builtin/get-tar-commit-id: make hash size independent
get-tar-commit-id: parse comment record
hash: add a function to lookup hash algorithm by length
remote-curl: make hash size independent
http: replace sha1_to_hex
http: compute hash of downloaded objects using the_hash_algo
http: replace hard-coded constant with the_hash_algo
http-walker: replace sha1_to_hex
http-push: remove remaining uses of sha1_to_hex
http-backend: allow 64-character hex names
http-push: convert to use the_hash_algo
builtin/pull: make hash-size independent
builtin/am: make hash size independent
...
|
|
We can't create a pack revindex if we haven't actually looked at the
index. Normally we would never get as far as creating a revindex without
having already been looking in the pack, so this code never bothered to
double-check that pack->index_data had been loaded.
But with the new multi-pack-index feature, many code paths might not
load the individual pack .idx at all (they'd find objects via the midx
and then open the .pack, but not its index).
This can't yet be triggered in practice, because a bug in the midx code
means we accidentally open up the individual .idx files anyway. But in
preparation for fixing that, let's have the revindex code check that
everything it needs has been loaded.
In most cases this will just be a quick noop. But note that this does
introduce a possibility of error (if we have to open the index and it's
corrupt), so load_pack_revindex() now returns a result code, and callers
need to handle the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of storing unsigned char pointers in the hash tables, switch to
storing instances of struct object_id. Update several internal functions
and one external function to take pointers to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch two hard-coded uses of 20 to references to the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace the uses of sha1_to_hex in the pack bitmap code with hash_to_hex
to allow the use of SHA-256 as well. Rename a few variables since they
are no longer limited to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct stored_bitmap to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Increase the checksum field in struct bitmap_disk_header to be
GIT_MAX_RAWSZ bytes in length and ensure that we hash the proper number
of bytes out when computing the bitmap checksum.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix of the base topic.
* jk/pack-objects-with-bitmap-fix:
pack-bitmap: drop "loaded" flag
traverse_bitmap_commit_list(): don't free result
t5310: test delta reuse with bitmaps
bitmap_has_sha1_in_uninteresting(): drop BUG check
|
|
When creating a thin pack, which allows objects to be made into a
delta against another object that is not in the resulting pack but
is known to be present on the receiving end, the code learned to
take advantage of the reachability bitmap; this allows the server
to send a delta against a base beyond the "boundary" commit.
* jk/pack-delta-reuse-with-bitmap:
pack-objects: reuse on-disk deltas for thin "have" objects
pack-bitmap: save "have" bitmap from walk
t/perf: add perf tests for fetches from a bitmapped server
t/perf: add infrastructure for measuring sizes
t/perf: factor out percent calculations
t/perf: factor boilerplate out of test_perf
|
|
In the early days of the bitmap code, there was a single
static bitmap_index struct that was used behind the scenes,
and any bitmap-related functions could lazily check
bitmap_git.loaded to see if they needed to read the on-disk
data.
But since 3ae5fa0768 (pack-bitmap: remove bitmap_git global
variable, 2018-06-07), the caller is responsible for the
lifetime of the bitmap_index struct, and we return it from
prepare_bitmap_git() and prepare_bitmap_walk(), both of
which load the on-disk data (or return NULL).
So outside of these functions, it's not possible to have a
bitmap_index for which the loaded flag is not true. Nor is
it possible to accidentally pass an already-loaded
bitmap_index to the loading function (which is static-local
to the file).
We can drop this unnecessary and confusing flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since it was introduced in fff42755ef (pack-bitmap: add
support for bitmap indexes, 2013-12-21), this function has
freed the result after traversing it. That is an artifact of
the early days of the bitmap code, when we had a single
static "struct bitmap_index". Back then, it was intended
that you would do:
prepare_bitmap_walk(&revs);
traverse_bitmap_commit_list(&revs);
Since the actual bitmap_index struct was totally behind the
scenes, it was convenient for traverse_bitmap_commit_list()
to clean it up, clearing the way for another traversal.
But since 3ae5fa0768 (pack-bitmap: remove bitmap_git global
variable, 2018-06-07), the caller explicitly manages the
bitmap_index struct itself, like this:
b = prepare_bitmap_walk(&revs);
traverse_bitmap_commit_list(b, &revs);
free_bitmap_index(b);
It no longer makes sense to auto-free the result after the
traversal. If you want to do another traversal, you'd just
create a new bitmap_index. And while nobody tries to call
traverse_bitmap_commit_list() twice, the fact that it throws
away the result might be surprising, and is better avoided.
Note that in the "old" way it was possible for two walks to
amortize the cost of opening the on-disk .bitmap file (since
it was stored in the global bitmap_index), but we lost that
in 3ae5fa0768. However, no code actually does this, so it's
not worth addressing now. The solution might involve a new:
reset_bitmap_walk(b, &revs);
call. Or we might even attach the bitmap data to its
matching packed_git struct, so that multiple
prepare_bitmap_walk() calls could use it. That can wait
until somebody actually has need of the optimization (and
until then, we'll do the correct, unsurprising thing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 30cdc33fba (pack-bitmap: save "have" bitmap from
walk, 2018-08-21) introduced a new function for looking at
the "have" side of a bitmap walk. Because it only makes
sense to do so after we've finished the walk, we added an
extra safety assertion, making sure that bitmap_git->result
is non-NULL.
However, this safety is misguided. It was trying to catch
the case where we had called prepare_bitmap_walk() to give
us a "struct bitmap_index", but had not yet called
traverse_bitmap_commit_list() to walk it. But all of the
interesting computation (including setting up the result and
"have" bitmaps) happens in the first function! The latter
function only delivers the result to a callback function.
So the case we were worried about is impossible; if you get
a non-NULL result from prepare_bitmap_walk(), then its
"have" field will be fully formed.
But much worse, traverse_bitmap_commit_list() actually frees
the result field as it finishes. Which means that this
assertion is worse than useless: it's almost guaranteed to
trigger!
Our test suite didn't catch this because the function isn't
actually exercised at all. The only caller comes from
6a1e32d532 (pack-objects: reuse on-disk deltas for thin
"have" objects, 2018-08-21), and that's triggered only when
you fetch or push history that contains an object with a
base that is found deep in history. Our test suite fetches
and pushes either don't use bitmaps, or use too-small
example repositories. But any reasonably-sized real-world
push or fetch (with bitmaps) would trigger this.
This patch drops the harmful assertion and tweaks the
docstring for the function to make the precondition clear.
The tests need to be improved to exercise this new
pack-objects feature, but we'll do that in a separate
commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we do a bitmap walk, we save the result, which
represents (WANTs & ~HAVEs); i.e., every object we care
about visiting in our walk. However, we throw away the
haves bitmap, which can sometimes be useful, too. Save it
and provide an access function so code which has performed a
walk can query it.
A few notes on the accessor interface:
- the bitmap code calls these "haves" because it grew out
of the want/have negotiation for fetches. But really,
these are simply the objects that would be flagged
UNINTERESTING in a regular traversal. Let's use that
more universal nomenclature for the external module
interface. We may want to change the internal naming
inside the bitmap code, but that's outside the scope of
this patch.
- it still uses a bare "sha1" rather than "oid". That's
true of all of the bitmap code. And in this particular
instance, our caller in pack-objects is dealing with the
bare sha1 that comes from a packed REF_DELTA (we're
pointing directly to the mmap'd pack on disk). That's
something we'll have to deal with as we transition to a
new hash, but we can wait and see how the caller ends up
being fixed and adjust this interface accordingly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many places in the codebase that want to iterate over
all packfiles known to Git. The purposes are wide-ranging, and
those that can take advantage of the multi-pack-index already
do. So, use get_all_packs() instead of get_packed_git() to be
sure we are iterating over all packfiles.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function to free struct bitmap_index instances, and use it where
needed (except when rebuild_existing_bitmaps() is used, since it creates
references to the bitmaps within the struct bitmap_index passed to it).
Note that the hashes field in struct bitmap_index is not freed because
it points to another field within the same struct. The documentation for
that field has been updated to clarify that.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the bitmap_git global variable. Instead, generate on demand an
instance of struct bitmap_index for code that needs to access it.
This allows us significant control over the lifetime of instances of
struct bitmap_index. In particular, packs can now be closed without
worrying if an unnecessarily long-lived "pack" field in struct
bitmap_index still points to it.
The bitmap API is also clearer in that we need to first obtain a struct
bitmap_index, then we use it.
This patch raises two potential issues: (1) memory for the struct
bitmap_index is allocated without being freed, and (2)
prepare_bitmap_git() and prepare_bitmap_walk() can reuse a previously
loaded bitmap. For (1), this will be dealt with in a subsequent patch in
this patch set that also deals with freeing the contents of the struct
bitmap_index (which were not freed previously, because they have global
scope). For (2), current bitmap users only load the bitmap once at most
(note that pack-objects can use bitmaps or write bitmaps, but not both
at the same time), so support for reuse has no effect - and future users
can pass around the struct bitmap_index * obtained if they need to do 2
or more things with the same bitmap.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to read compressed bitmap was not careful to avoid reading
past the end of the file, which has been corrected.
* jk/ewah-bounds-check:
ewah: adjust callers of ewah_read_mmap()
ewah_read_mmap: bounds-check mmap reads
|
|
The return value of ewah_read_mmap() is now an ssize_t,
since we could (in theory) process up to 32GB of data. This
would never happen in practice, but a corrupt or malicious
.bitmap or index file could convince us to do so.
Let's make sure that we don't stuff the value into an int,
which would cause us to incorrectly move our pointer
forward. We'd always move too little, since negative values
are used for reporting errors. So the worst case is just
that we end up reporting a corrupt file, not an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This field is only need for pack-bitmap, which is an optional
feature. Move it to a separate array that is only allocated when
pack-bitmap is used (like objects[], it is not freed, since we need it
until the end of the process)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reason callers have to call this is to make sure either packed_git
or packed_git_mru pointers are initialized since we don't do that by
default. Sometimes it's hard to see this connection between where the
function is called and where packed_git pointer is used (sometimes in
separate functions).
Keep this dependency internal because now all access to packed_git and
packed_git_mru must go through get_xxx() wrappers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow prepare_packed_git callers to be
more specific about which repository to handle. See commit "sha1_file:
add repository argument to link_alt_odb_entry" for an explanation of
the #define trick.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a process with multiple repositories open, packfile accessors
should be associated to a single repository and not shared globally.
Move packed_git and packed_git_mru into the_repository and adjust
callers to reflect this.
[nd: while at there, wrap access to these two fields in get_packed_git()
and get_packed_git_mru(). This allows us to lazily initialize these
fields without caller doing that explicitly]
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert traverse_bitmap_commit_list and the callbacks it takes to use a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Memory leaks in various codepaths have been plugged.
* ma/leakplugs:
pack-bitmap[-write]: use `object_array_clear()`, don't leak
object_array: add and use `object_array_pop()`
object_array: use `object_array_clear()`, not `free()`
leak_pending: use `object_array_clear()`, not `free()`
commit: fix memory leak in `reduce_heads()`
builtin/commit: fix memory leak in `prepare_index()`
|
Junio C Hamano
Jeff King
René Scharfe
brian m. carlson
Nguyễn Thái Ngọc Duy
Derrick Stolee
Jonathan Tan
Johannes Schindelin
Stefan Beller