| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make parse_object, parse_object_or_die, and parse_object_buffer take a
pointer to struct object_id. Remove the temporary variables inserted
earlier, since they are no longer necessary. Transform all of the
callers using the following semantic patch:
@@
expression E1;
@@
- parse_object(E1.hash)
+ parse_object(&E1)
@@
expression E1;
@@
- parse_object(E1->hash)
+ parse_object(E1)
@@
expression E1, E2;
@@
- parse_object_or_die(E1.hash, E2)
+ parse_object_or_die(&E1, E2)
@@
expression E1, E2;
@@
- parse_object_or_die(E1->hash, E2)
+ parse_object_or_die(E1, E2)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1.hash, E2, E3, E4, E5)
+ parse_object_buffer(&E1, E2, E3, E4, E5)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1->hash, E2, E3, E4, E5)
+ parse_object_buffer(E1, E2, E3, E4, E5)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We may run for_each_alternate_ref() twice, once in
find_common() and once in everything_local(). This operation
can be expensive, because it involves running a sub-process
which must freshly load all of the alternate's refs from
disk.
Let's cache and reuse the results between the two calls. We
can make some optimizations based on the particular use
pattern in fetch-pack to keep our memory usage down.
The first is that we only care about the sha1s, not the refs
themselves. So it's OK to store only the sha1s, and to
suppress duplicates. The natural fit would therefore be a
sha1_array.
However, sha1_array's de-duplication happens only after it
has read and sorted all entries. It still stores each
duplicate. For an alternate with a large number of refs
pointing to the same commits, this is a needless expense.
Instead, we'd prefer to eliminate duplicates before putting
them in the cache, which implies using a hash. We can
further note that fetch-pack will call parse_object() on
each alternate sha1. We can therefore keep our cache as a
set of pointers to "struct object". That gives us a place to
put our "already seen" bit with an optimized hash lookup.
And as a bonus, the object stores the sha1 for us, so
pointer-to-object is all we need.
There are two extra optimizations I didn't do here:
- we actually store an array of pointer-to-object.
Technically we could just walk the obj_hash table
looking for entries with the ALTERNATE flag set (because
our use case doesn't care about the order here).
But that hash table may be mostly composed of
non-ALTERNATE entries, so we'd waste time walking over
them. So it would be a slight win in memory use, but a
loss in CPU.
- the items we pull out of the cache are actual "struct
object"s, but then we feed "obj->sha1" to our
sub-functions, which promptly call parse_object().
This second parse is cheap, because it starts with
lookup_object() and will bail immediately when it sees
we've already parsed the object. We could save the extra
hash lookup, but it would involve refactoring the
functions we call. It may or may not be worth the
trouble.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
This macro is a temporary change to ease the transition of struct object
to use struct object_id. It takes an argument of struct object and
returns the object's hash. Provide this hash next to struct object for
easier conversion.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
This is a thin compatibility wrapper around
add_pending_object_with_path. But the only caller is
add_object_array, which is itself just a thin compatibility
wrapper. There are no external callers, so we can just
remove this middle wrapper.
Noticed-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you resolve a sha1, you can optionally keep any context
found during the resolution, including the path and mode of
a tree entry (e.g., when looking up "HEAD:subdir/file.c").
The add_object_array_with_context function lets you then
attach that context to an entry in a list. Unfortunately,
the interface for doing so is horrible. The object_context
structure is large and most object_array users do not use
it. Therefore we keep a pointer to the structure to avoid
burdening other users too much. But that means when we do
use it that we must allocate the struct ourselves. And the
struct contains a fixed PATH_MAX-sized buffer, which makes
this wholly unsuitable for any large arrays.
We can observe that there is only a single user of the
"with_context" variant: builtin/grep.c. And in that use
case, the only element we care about is the path. We can
therefore store only the path as a pointer (the context's
mode field was redundant with the object_array_entry itself,
and nobody actually cared about the surrounding tree). This
still requires a strdup of the pathname, but at least we are
only consuming the minimum amount of memory for each string.
We can also handle the copying ourselves in
add_object_array_*, and free it as appropriate in
object_array_release_entry.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's currently no easy way to free the memory associated
with an object_array (and in most cases, we simply leak the
memory in a rev_info's pending array). Let's provide a
helper to make this easier to handle.
We can make use of it in list-objects.c, which does the same
thing by hand (but fails to free the "name" field of each
entry, potentially leaking memory).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next commits, we will enhance the fsck_tag() function to check
tag objects more thoroughly. To this end, we need a function to verify
that a given string is a valid object type, but that does not die() in
the negative case.
While at it, prepare type_from_string() for counted strings, i.e. strings
with an explicitly specified length rather than a NUL termination.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we call lookup_commit, lookup_tree, etc, the logic goes
something like:
1. Look for an existing object struct. If we don't have
one, allocate and return a new one.
2. Double check that any object we have is the expected
type (and complain and return NULL otherwise).
3. Convert an object with type OBJ_NONE (from a prior
call to lookup_unknown_object) to the expected type.
We can encapsulate steps 2 and 3 in a helper function which
checks whether we have the expected object type, converts
OBJ_NONE as appropriate, and returns the object.
Not only does this shorten the code, but it also provides
one central location for converting OBJ_NONE objects into
objects of other types. Future patches will use that to
enforce type-specific invariants.
Since this is a refactoring, we would want it to behave
exactly as the current code. It takes a little reasoning to
see that this is the case:
- for lookup_{commit,tree,etc} functions, we are just
pulling steps 2 and 3 into a function that does the same
thing.
- for the call in peel_object, we currently only do step 3
(but we want to consolidate it with the others, as
mentioned above). However, step 2 is a noop here, as the
surrounding conditional makes sure we have OBJ_NONE
(which we want to keep to avoid an extraneous call to
sha1_object_info).
- for the call in lookup_commit_reference_gently, we are
currently doing step 2 but not step 3. However, step 3
is a noop here. The object we got will have just come
from deref_tag, which must have figured out the type for
each object in order to know when to stop peeling.
Therefore the type will never be OBJ_NONE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "struct object" type implements basic object
polymorphism. Individual instances are allocated as
concrete types (or as a union type that can store any
object), and a "struct object *" can be cast into its real
type after examining its "type" enum. This means it is
dangerous to have a type field that does not match the
allocation (e.g., setting the type field of a "struct blob"
to "OBJ_COMMIT" would mean that a reader might read past the
allocated memory).
In most of the current code this is not a problem; the first
thing we do after allocating an object is usually to set its
type field by passing it to create_object. However, the
virtual commits we create in merge-recursive.c do not ever
get their type set. This does not seem to have caused
problems in practice, though (presumably because we always
pass around a "struct commit" pointer and never even look at
the type).
We can fix this oversight and also make it harder for future
code to get it wrong by setting the type directly in the
object allocation functions.
This will also make it easier to fix problems with commit
index allocation, as we know that any object allocated by
alloc_commit_node will meet the invariant that an object
with an OBJ_COMMIT type field will have a unique index
number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Attempts to show where a single-strand-of-pearls break in "git log"
output.
* nd/log-show-linear-break:
log: add --show-linear-break to help see non-linear history
object.h: centralize object flag allocation
|
|
Option explanation is in rev-list-options.txt. The interaction with -z
is left undecided.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the field "flags" is mainly used by the revision walker, it is
also used in many other places. Centralize the whole flag allocation to
one place for a better overview (and easier to move flags if we have
too).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
|
|
Previously, the memory management of the object_array_entry::name
field was inconsistent and undocumented. object_array_entries are
ultimately created by a single function, add_object_array_with_mode(),
which has an argument "const char *name". This function used to
simply set the name field to reference the string pointed to by the
name parameter, and nobody on the object_array side ever freed the
memory. Thus, it assumed that the memory for the name field would be
managed by the caller, and that the lifetime of that string would be
at least as long as the lifetime of the object_array_entry. But
callers were inconsistent:
* Some passed pointers to constant strings or argv entries, which was
OK.
* Some passed pointers to newly-allocated memory, but didn't arrange
for the memory ever to be freed.
* Some passed the return value of sha1_to_hex(), which is a pointer to
a statically-allocated buffer that can be overwritten at any time.
* Some passed pointers to refnames that they received from a
for_each_ref()-type iteration, but the lifetimes of such refnames is
not guaranteed by the refs API.
Bring consistency to this mess by changing object_array to make its
own copy for the object_array_entry::name field and free this memory
when an object_array_entry is deleted from the array.
Many callers were passing the empty string as the name parameter, so
as a performance optimization, treat the empty string specially.
Instead of making a copy, store a pointer to a statically-allocated
empty string to object_array_entry::name. When deleting such an
entry, skip the free().
Change the callers that were already passing copies to
add_object_array_with_mode() to either skip the copy, or (if the
memory needed to be allocated anyway) freeing the memory itself.
A part of this commit effectively reverts
70d26c6e76 read_revisions_from_stdin: make copies for handle_revision_arg
because the copying introduced by that commit (which is still
necessary) is now done at a deeper level.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old version copied one entry to its destination position, then
deleted any matching entries from the tail of the array. This
required the tail of the array to be copied multiple times. It didn't
affect the complexity of the algorithm because the whole tail has to
be searched through anyway. But all the copying was unnecessary.
Instead, check for the existence of an entry with the same name in the
*head* of the list before copying an entry to its final position.
This way each entry has to be copied at most one time.
Extract a helper function contains_name() to do a bit of the work.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function that allows unwanted entries in an object_array to be
removed. This encapsulation is a step towards giving object_array
ownership of its entries' name memory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make "grep" honor the "--textconv" option also for the object case, i.e.
when used with an argument "rev:path".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many call-sites of parse_object assume that they will get a
non-NULL return value; this is not the case if we encounter
an error while parsing the object.
This patch adds a wrapper function around parse_object that
handles dying automatically, and uses it anywhere we
immediately try to access the return value as a non-NULL
pointer (i.e., anywhere that we would currently segfault).
This wrapper may also be useful in other places. The most
obvious one is code like:
o = parse_object(sha1);
if (!o)
die(...);
However, these should not be mechanically converted to
parse_object_or_die, as the die message is sometimes
customized. Later patches can address these sites on a
case-by-case basis.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
7914053 (Remove unused object-ref code, 2008-02-25) removed all uses of
the structure from the code, but forgot to remove the type definition
itself.
Signed-off-by: Jakob Pfender <jpfender@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
object_list_append() and object_list_length}() are not used anywhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-all-implies-HEAD:
bundle: allow the same ref to be given more than once
revision walker: include a detached HEAD in --all
|
|
"git bundle create x master master" used to create a bundle that lists
the same branch (master) twice. Cloning from such a bundle resulted in
a needless warning "warning: Duplicated ref: refs/remotes/origin/master".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
140b378 (Teach git diff-tree --stdin to diff trees, 2008-08-10) broke the
more important case of reading series of commits to filter ones that touch
given pathspecs.
Noticed by Mark Levedahl, running "gitk ec3a4ba" and trying to focus on
commits that touch "t/" directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each object in struct object_array is extended with the mode.
If not specified, S_IFINVALID is used. An object with an mode value
can be added with add_object_array_with_mode.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This replaces the fairly odd "created_object()" function that did _most_
of the object setup with a more complete "create_object()" function that
also has a more natural calling convention.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows you to add an arbitrary "decoration" of your choice to any
object. It's a space- and time-efficient way to add information to
arbitrary objects, especially if most objects probably do not have the
decoration.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This function is called only once in the whole source tree. Let's move
its code inline instead, which is also in the spirit of removing as much
object type char arrays as possible (not that this patch does anything for
that but at least it is now a local matter).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Sometime typename() is used, sometimes type_names[] is accessed directly.
Let's enforce typename() all the time which allows for validating the
type.
Also let's add a function to go from a name to a type and use it instead
of manual memcpy() when appropriate.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds a new command, git-for-each-ref. You can have it iterate
over refs and have it output various aspects of the objects they
refer to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When copying from an existing pack and when copying from a loose
object with new style header, the code makes sure that the piece
we are going to copy out inflates well and inflate() consumes
the data in full while doing so.
The check to see if the xdelta really apply is quite expensive
as you described, because you would need to have the image of
the base object which can be represented as a delta against
something else.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There are a few special places where some programs accessed the object
hash array directly, which bothered me because I wanted to play with some
simple re-organizations.
So this patch makes the object hash array data structures all entirely
local to object.c, and the few users who wanted to look at it now get to
use a function to query how many object index entries there can be, and to
actually access the array.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We've had this notion of a "object_list" for a long time, which eventually
grew a "name" member because some users (notably git-rev-list) wanted to
name each object as it is generated.
That object_list is great for some things, but it isn't all that wonderful
for others, and the "name" member is generally not used by everybody.
This patch splits the users of the object_list array up into two: the
traditional list users, who want the list-like format, and who don't
actually use or want the name. And another class of users that really used
the list as an extensible array, and generally wanted to name the objects.
The patch is fairly straightforward, but it's also biggish. Most of it
really just cleans things up: switching the revision parsing and listing
over to the array makes things like the builtin-diff usage much simpler
(we now see exactly how many members the array has, and we don't get the
objects reversed from the order they were on the command line).
One of the main reasons for doing this at all is that the malloc overhead
of the simple object list was actually pretty high, and the array is just
a lot denser. So this patch brings down memory usage by git-rev-list by
just under 3% (on top of all the other memory use optimizations) on the
mozilla archive.
It does add more lines than it removes, and more importantly, it adds a
whole new infrastructure for maintaining lists of objects, but on the
other hand, the new dynamic array code is pretty obvious. The change to
builtin-diff-tree.c shows a fairly good example of why an array interface
is sometimes more natural, and just much simpler for everybody.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This shrinks "struct object" to the absolutely minimal size possible.
It now contains /only/ the object flags and the SHA1 hash name of the
object.
The "refs" field, which is really needed only for fsck, is maintained in
a separate hashed lookup-table, allowing all normal users to totally
ignore it.
This helps memory usage, although not as much as I hoped: it looks like
the allocation overhead of malloc (and the alignment constraints in
particular) means that while the structure size shrinks, the actual
allocation overhead mostly does not.
[ That said: memory usage is actually down, but not as much as it should
be: I suspect just one of the object types actually ended up shrinking
its effective allocation size.
To get to the next level, we probably need specialized allocators that
don't pad the allocation more than necessary. ]
The separation makes for some code cleanup, though, and makes the ref
tracking that fsck wants a clearly separate thing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Every single user actually wanted this only for commit objects, and we
have no reason to waste space on it for other object types. So just move
the structure member from the low-level "struct object" into the "struct
commit".
This leaves the commit object the same size, and removes one unnecessary
pointer from all other object allocations.
This shrinks memory usage (still at a fairly hefty half-gig, admittedly)
of "git-rev-list --all --objects" on the mozilla repo by another 5% in my
tests.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In a simple test, this brings down the CPU time from 47 sec to 22 sec.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
ISO C99 (and GCC 3.x or later) lets you write a flexible array
at the end of a structure, like this:
struct frotz {
int xyzzy;
char nitfol[]; /* more */
};
GCC 2.95 and 2.96 let you to do this with "char nitfol[0]";
unfortunately this is not allowed by ISO C90.
This declares such construct like this:
struct frotz {
int xyzzy;
char nitfol[FLEX_ARRAY]; /* more */
};
and git-compat-util.h defines FLEX_ARRAY to 0 for gcc 2.95 and
empty for others.
If you are using a C90 C compiler, you should be able
to override this with CFLAGS=-DFLEX_ARRAY=1 from the
command line of "make".
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The object parsing code builds a generic "this object references that
object" because doing a full connectivity check for fsck requires it.
However, nothing else really needs it, and it's quite expensive for
git-rev-list that can have tons of objects in flight.
So, exactly like the commit buffer save thing, add a global flag to
disable it, and use it in git-rev-list.
Before:
$ /usr/bin/time git-rev-list --objects v2.6.12..HEAD | wc -l
12.28user 0.29system 0:12.57elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+26718minor)pagefaults 0swaps
59124
After this change:
$ /usr/bin/time git-rev-list --objects v2.6.12..HEAD | wc -l
10.33user 0.18system 0:10.54elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+18509minor)pagefaults 0swaps
59124
and note how the number of pages touched by git-rev-list for this
particular object list has shrunk from 26,718 (104 MB) to 18,509 (72 MB).
Calculating the total object difference between two git revisions is still
clearly the most expensive git operation (both in memory and CPU time),
but it's now less than 40% of what it used to be.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
brian m. carlson
Jeff King
Nguyễn Thái Ngọc Duy
Johannes Schindelin
Junio C Hamano
Michael Haggerty
Michael J Gruber
Heiko Voigt
Jakob Pfender
Thiago Farina
Martin Koegler
Linus Torvalds
Nicolas Pitre
Junio C Hamano
Linus Torvalds
Daniel Barkalow