| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Combine the unpack_loose_short_header(),
unpack_loose_header_to_strbuf() and unpack_loose_header() functions
into one.
The unpack_loose_header_to_strbuf() function was added in
46f034483eb (sha1_file: support reading from a loose object of unknown
type, 2015-05-03).
Its code was mostly copy/pasted between it and both of
unpack_loose_header() and unpack_loose_short_header(). We now have a
single unpack_loose_header() function which accepts an optional
"struct strbuf *" instead.
I think the remaining unpack_loose_header() function could be further
simplified, we're carrying some complexity just to be able to emit a
garbage type longer than MAX_HEADER_LEN, we could alternatively just
say "we found a garbage type <first 32 bytes>..." instead. But let's
leave the current behavior in place for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the parse_loose_header_extended() function public and remove the
parse_loose_header() wrapper. The only direct user of it outside of
object-file.c itself was in streaming.c, that caller can simply pass
the required "struct object-info *" instead.
This change is being done in preparation for teaching
read_loose_object() to accept a flag to pass to
parse_loose_header(). It isn't strictly necessary for that change, we
could simply use parse_loose_header_extended() there, but will leave
the API in a better end state.
It would be a better end-state to have already moved the declaration
of these functions to object-store.h to avoid the forward declaration
of "struct object_info" in cache.h, but let's leave that cleanup for
some other time.
1. https://lore.kernel.org/git/patch-v6-09.22-5b9278e7bb4-20210907T104559Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Return a -1 when git_inflate() fails instead of whatever Z_* status
we'd get from zlib.c. This makes no difference to any error we report,
but makes it more obvious that we don't care about the specific zlib
error codes here.
See d21f8426907 (unpack_sha1_header(): detect malformed object header,
2016-09-25) for the commit that added the "return status" code. As far
as I can tell there was never a real reason (e.g. different reporting)
for carrying down the "status" as opposed to "-1".
At the time that d21f8426907 was written there was a corresponding
"ret < Z_OK" check right after the unpack_sha1_header() call (the
"unpack_sha1_header()" function was later rename to our current
"unpack_loose_header()").
However, that check was removed in c84a1f3ed4d (sha1_file: refactor
read_object, 2017-06-21) without changing the corresponding return
code.
So let's do the minor cleanup of also changing this function to return
a -1.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the loose_object_info() function returns an error stop faking up
the "oi->typep" to OBJ_BAD. Let the return value of the function
itself suffice. This code cleanup simplifies subsequent changes.
That we set this at all is a relic from the past. Before
052fe5eaca9 (sha1_loose_object_info: make type lookup optional,
2013-07-12) we would always return the type_from_string(type) via the
parse_sha1_header() function, or -1 (i.e. OBJ_BAD) if we couldn't
parse it.
Then in a combination of 46f034483eb (sha1_file: support reading from
a loose object of unknown type, 2015-05-03) and
b3ea7dd32d6 (sha1_loose_object_info: handle errors from
unpack_sha1_rest, 2017-10-05) our API drifted even further towards
conflating the two again.
Having read the code paths involved carefully I think this is OK. We
are just about to return -1, and we have only one caller:
do_oid_object_info_extended(). That function will in turn go on to
return -1 when we return -1 here.
This might be introducing a subtle bug where a caller of
oid_object_info_extended() would inspect its "typep" and expect a
meaningful value if the function returned -1.
Such a problem would not occur for its simpler oid_object_info()
sister function. That one always returns the "enum object_type", which
in the case of -1 would be the OBJ_BAD.
Having read the code for all the callers of these functions I don't
believe any such bug is being introduced here, and in any case we'd
likely already have such a bug for the "sizep" member (although
blindly checking "typep" first would be a more common case).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that struct object_id has an algorithm field, we should populate it.
This will allow us to handle object IDs in any supported algorithm and
distinguish between them. Ensure that the field is written whenever we
write an object ID by storing it explicitly every time we write an
object. Set values for the empty blob and tree values as well.
In addition, use the algorithm field to compare object IDs. Note that
because we zero-initialize struct object_id in many places throughout
the codebase, we default to the default algorithm in cases where the
algorithm field is zero rather than explicitly initialize all of those
locations.
This leads to a branch on every comparison, but the alternative is to
compare the entire buffer each time and padding the buffer for SHA-1.
That alternative ranges up to 3.9% worse than this approach on the perf
t0001, t1450, and t1451.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're hashing a value which is going to be an object ID, we want to
zero-pad that value if necessary. To do so, use the final_oid_fn
instead of the final_fn anytime we're going to create an object ID to
ensure we perform this operation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To avoid the penalty of having to branch in hash comparison functions,
we'll want to always compare the full hash member in a struct object_id,
which will require that SHA-1 object IDs be zero-padded. To do so, add
a function which finalizes a hash context and writes it into an object
ID that performs this padding.
Move the definition of struct object_id and the constant definitions
higher up so we they are available for us to use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change all remnants of "sha1" in hash-lookup.c and .h and rename them to
reflect that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop the last remnant of "sha1" in this file and rename it to reflect
that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Junio C Hamano
Elijah Newren
brian m. carlson
René Scharfe
Martin Ågren