summaryrefslogtreecommitdiff
path: root/name-hash.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-05Clean up pthread_create() error handlingLibravatar Nguyễn Thái Ngọc Duy1-6/+10
Normally pthread_create() rarely fails. But with new pthreads wrapper, pthread_create() will return ENOSYS on a system without thread support. Threaded code _is_ protected by HAVE_THREADS and pthread_create() should never run in the first place. But the situation could change in the future and bugs may sneak in. Make sure that all pthread_create() reports the error cause. While at there, mark these strings for translation if they aren't. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-05name-hash.c: remove #ifdef NO_PTHREADSLibravatar Nguyễn Thái Ngọc Duy1-18/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-18trace.h: support nested performance tracingLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Performance measurements are listed right now as a flat list, which is fine when we measure big blocks. But when we start adding more and more measurements, some of them could be just part of a bigger measurement and a flat list gives a wrong impression that they are executed at the same level instead of nested. Add trace_performance_enter() and trace_performance_leave() to allow indent these nested measurements. For now it does not help much because the only nested thing is (lazy) name hash initialization (e.g. called in diff-index from "git status"). This will help more because I'm going to add some more tracing that's actually nested. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-27Merge branch 'bp/name-hash-dirname-fix'Libravatar Junio C Hamano1-3/+3
"git add" files in the same directory, but spelling the directory path in different cases on case insensitive filesystem, corrupted the name hash data structure and led to unexpected results. This has been corrected. * bp/name-hash-dirname-fix: name-hash: properly fold directory names in adjust_dirname_case()
2018-02-08name-hash: properly fold directory names in adjust_dirname_case()Libravatar Ben Peart1-3/+3
Correct the pointer arithmetic in adjust_dirname_case() so that it calls find_dir_entry() with the correct string length. Previously passing in "dir1/foo" would pass a length of 6 instead of the correct 4. This resulted in find_dir_entry() never finding the entry and so the subsequent memcpy that would fold the name to the version with the correct case never executed. Add a test to validate the corrected behavior with name folding of directories. Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-02trace: measure where the time is spent in the index-heavy operationsLibravatar Nguyễn Thái Ngọc Duy1-0/+3
All the known heavy code blocks are measured (except object database access). This should help identify if an optimization is effective or not. An unoptimized git-status would give something like below: 0.001791141 s: read cache ... 0.004011363 s: preload index 0.000516161 s: refresh index 0.003139257 s: git command: ... 'status' '--porcelain=2' 0.006788129 s: diff-files 0.002090267 s: diff-index 0.001885735 s: initialize name hash 0.032013138 s: read directory 0.051781209 s: git command: './git' 'status' Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-07hashmap: add API to disable item counting when threadedLibravatar Jeff Hostetler1-2/+8
This is to address concerns raised by ThreadSanitizer on the mailing list about threaded unprotected R/W access to map.size with my previous "disallow rehash" change (0607e10009ee4e37cb49b4cec8d28a9dda1656a4). See: https://public-inbox.org/git/adb37b70139fd1e2bac18bfd22c8b96683ae18eb.1502780344.git.martin.agren@gmail.com/ Add API to hashmap to disable item counting and thus automatic rehashing. Also include API to later re-enable them. When item counting is disabled, the map.size field is invalid. So to prevent accidents, the field has been renamed and an accessor function hashmap_get_size() has been added. All direct references to this field have been been updated. And the name of the field changed to map.private_size to communicate this. Here is the relevant output from ThreadSanitizer showing the problem: WARNING: ThreadSanitizer: data race (pid=10554) Read of size 4 at 0x00000082d488 by thread T2 (mutexes: write M16): #0 hashmap_add hashmap.c:209 #1 hash_dir_entry_with_parent_and_prefix name-hash.c:302 #2 handle_range_dir name-hash.c:347 #3 handle_range_1 name-hash.c:415 #4 lazy_dir_thread_proc name-hash.c:471 #5 <null> <null> Previous write of size 4 at 0x00000082d488 by thread T1 (mutexes: write M31): #0 hashmap_add hashmap.c:209 #1 hash_dir_entry_with_parent_and_prefix name-hash.c:302 #2 handle_range_dir name-hash.c:347 #3 handle_range_1 name-hash.c:415 #4 handle_range_dir name-hash.c:380 #5 handle_range_1 name-hash.c:415 #6 lazy_dir_thread_proc name-hash.c:471 #7 <null> <null> Martin gives instructions for running TSan on test t3008 in this post: https://public-inbox.org/git/CAN0heSoJDL9pWELD6ciLTmWf-a=oyxe4EXXOmCKvsG5MSuzxsA@mail.gmail.com/ Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-05name-hash.c: drop hashmap_cmp_fn castLibravatar Stefan Beller1-9/+13
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30hashmap.h: compare function has access to a data fieldLibravatar Stefan Beller1-6/+10
When using the hashmap a common need is to have access to caller provided data in the compare function. A couple of times we abuse the keydata field to pass in the data needed. This happens for example in patch-ids.c. This patch changes the function signature of the compare function to have one more void pointer available. The pointer given for each invocation of the compare function must be defined in the init function of the hashmap and is just passed through. Documentation of this new feature is deferred to a later patch. This is a rather mechanical conversion, just adding the new pass-through parameter. However while at it improve the naming of the fields of all compare functions used by hashmaps by ensuring unused parameters are prefixed with 'unused_' and naming the parameters what they are (instead of 'unused' make it 'unused_keydata'). Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-31name-hash: fix buffer overrunLibravatar Kevin Willford1-1/+3
Add check for the end of the entries for the thread partition. Add test for lazy init name hash with specific directory structure The lazy init hash name was causing a buffer overflow when the last entry in the index was multiple folder deep with parent folders that did not have any files in them. This adds a test for the boundary condition of the thread partitions with the folder structure that was triggering the buffer overflow. The fix was to check if it is the last entry for the thread partition in the handle_range_dir and not try to use the next entry in the cache. Signed-off-by: Kevin Willford <kewillf@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-24name-hash: perf improvement for lazy_init_name_hashLibravatar Jeff Hostetler1-7/+485
Improve performance of lazy_init_name_hash() when ignore_case is set. Teach name-hash to build the istate.name_hash and istate.dir_hash simultaneously using a forward-diving technique on the pathname of the index_entry, rather than adding name_hash entries and then searching backwards in the pathname for parent directories. This borrows algorithm ideas from clear_ce_flags_{1,dir}. Multiple threads are used with the new algorithm to speed hashmap construction. This new code path is only used when threads are present (a compiler settings) and when the index is large enough to warrant the pthread complexity. The code in clear_ce_flags_dir() uses a linear search to find the adjacent index entries with the same prefix; a binary search is used here handle_range_dir() to further speed things up. The size of LAZY_THREAD_COST was determined from rough analysis using: t/helper/test-lazy-init-name-hash --analyze Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-22name-hash: specify initial size for istate.dir_hash tableLibravatar Jeff Hostetler1-1/+2
Specify an initial size for the istate.dir_hash HashMap matching the size of the istate.name_hash. Previously hashmap_init() was given 0, causing a 64 bucket hashmap to be created. When working with very large repositories, this would cause numerous rehash() calls to realloc and rebalance the hashmap. This is especially true when the worktree is deep, with many directories containing a few files. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22convert trivial cases to FLEX_ARRAY macrosLibravatar Jeff King1-2/+1
Using FLEX_ARRAY macros reduces the amount of manual computation size we have to do. It also ensures we don't overflow size_t, and it makes sure we write the same number of bytes that we allocated. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-21name-hash: don't reuse cache_entry in dir_entryLibravatar David Turner1-26/+28
Stop reusing cache_entry in dir_entry; doing so causes a use-after-free bug. During merges, we free entries that we no longer need in the destination index. But those entries might have also been stored in the dir_entry cache, and when a later call to add_to_index found them, they would be used after being freed. To prevent this, change dir_entry to store a copy of the name instead of a pointer to a cache_entry. This entails some refactoring of code that expects the cache_entry. Keith McGuigan <kmcguigan@twitter.com> diagnosed this bug and wrote the initial patch, but this version does not use any of Keith's code. Helped-by: Keith McGuigan <kmcguigan@twitter.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-07hashmap: add simplified hashmap_get_from_hash() APILibravatar Karsten Blees1-3/+2
Hashmap entries are typically looked up by just a key. The hashmap_get() API expects an initialized entry structure instead, to support compound keys. This flexibility is currently only needed by find_dir_entry() in name-hash.c (and compat/win32/fscache.c in the msysgit fork). All other (currently five) call sites of hashmap_get() have to set up a near emtpy entry structure, resulting in duplicate code like this: struct hashmap_entry keyentry; hashmap_entry_init(&keyentry, hash(key)); return hashmap_get(map, &keyentry, key); Add a hashmap_get_from_hash() API that allows hashmap lookups by just specifying the key and its hash code, i.e.: return hashmap_get_from_hash(map, hash(key), key); Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-20name-hash.c: replace cache_name_compare() with memcmp(3)Libravatar Jeremiah Mahler1-1/+1
The same_name() private function wants a quick-and-exact check to see if they two names are byte-for-byte identical first and then fall back to the slow path. Use memcmp(3) for the former to make it clear that we do not want any "name" specific comparison. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-24name-hash: retire unused index_name_exists()Libravatar Eric Sunshine1-8/+1
db5360f3f496 (name-hash: refactor polymorphic index_name_exists(); 2013-09-17) split index_name_exists() into index_file_exists() and index_dir_exists() but retained index_name_exists() as a thin wrapper to avoid disturbing possible in-flight topics. Since this change landed in 'master' some time ago and there are no in-flight topics referencing index_name_exists(), retire it. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-18name-hash.c: remove cache entries instead of marking them CE_UNHASHEDLibravatar Karsten Blees1-24/+22
The new hashmap implementation supports remove, so really remove unused cache entries from the name hashmap instead of just marking them. The CE_UNHASHED flag and CE_STATE_MASK are no longer needed. Keep the CE_HASHED flag to prevent adding entries twice. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-18name-hash.c: use new hash map implementation for cache entriesLibravatar Karsten Blees1-16/+8
Note: the "ce->next = NULL;" in unpack-trees.c::do_add_entry can safely be removed, as ce->next (now ce->ent.next) is always properly initialized in name-hash.c::hash_index_entry. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-18name-hash.c: remove unreferenced directory entriesLibravatar Karsten Blees1-7/+8
The new hashmap implementation supports remove, so remove and free directory entries that are no longer referenced by active cache entries. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-18name-hash.c: use new hash map implementation for directoriesLibravatar Karsten Blees1-59/+18
Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-17name-hash: stop storing trailing '/' on paths in index_state.dir_hashLibravatar Eric Sunshine1-5/+6
When 5102c617 (Add case insensitivity support for directories when using git status, 2010-10-03) added directories to the name-hash there was only a single hash table in which both real cache entries and leading directory prefixes were registered. To distinguish between the two types of entries, directories were stored with a trailing '/'. 2092678c (name-hash.c: fix endless loop with core.ignorecase=true, 2013-02-28), however, moved directories to a separate hash table (index_state.dir_hash) but retained the (now) redundant trailing '/', thus callers continue to bear the burden of ensuring the slash's presence before searching the index for a directory. Eliminate this redundancy by storing paths in the dir-hash without the trailing '/'. An important benefit of this change is that it eliminates undocumented and dangerous behavior of dir.c:directory_exists_in_index_icase() in which it assumes not only that it can validly access one character beyond the end of its incoming directory argument, but also that that character will unconditionally be a '/'. This perilous behavior was "tolerated" because the string passed in by its lone caller always had a '/' in that position, however, things broke [1] when 2eac2a4c (ls-files -k: a directory only can be killed if the index has a non-directory, 2013-08-15) added a new caller which failed to respect the undocumented assumption. [1]: http://thread.gmane.org/gmane.comp.version-control.git/232727 Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-17name-hash: refactor polymorphic index_name_exists()Libravatar Eric Sunshine1-24/+30
Depending upon the absence or presence of a trailing '/' on the incoming pathname, index_name_exists() checks either if a file is present in the index or if a directory is represented within the index. Each caller explicitly chooses the mode of operation by adding or removing a trailing '/' before invoking index_name_exists(). Since these two modes of operations are disjoint and have no code in common (one searches index_state.name_hash; the other dir_hash), they can be represented more naturally as distinct functions: one to search for a file, and one for a directory. Splitting index searching into two functions relieves callers of the artificial burden of having to add or remove a slash to select the mode of operation; instead they just call the desired function. A subsequent patch will take advantage of this benefit in order to eliminate the requirement that the incoming pathname for a directory search must have a trailing slash. (In order to avoid disturbing in-flight topics, index_name_exists() is retained as a thin wrapper dispatching either to index_dir_exists() or index_file_exists().) Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-01Merge branch 'kb/name-hash'Libravatar Junio C Hamano1-43/+139
The code to keep track of what directory names are known to Git on platforms with case insensitive filesystems can get confused upon a hash collision between these pathnames and looped forever. * kb/name-hash: name-hash.c: fix endless loop with core.ignorecase=true
2013-03-21Merge branch 'nd/preallocate-hash'Libravatar Junio C Hamano1-0/+2
When we know approximately how many entries we will have in the hash-table, it makes sense to size the hash table to that number from the beginning to avoid unnecessary rehashing. * nd/preallocate-hash: Preallocate hash tables when the number of inserts are known in advance
2013-03-16Preallocate hash tables when the number of inserts are known in advanceLibravatar Nguyễn Thái Ngọc Duy1-0/+2
This avoids unnecessary re-allocations and reinsertions. On webkit.git (i.e. about 182k inserts to the name hash table), this reduces about 100ms out of 3s user time. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-27name-hash.c: fix endless loop with core.ignorecase=trueLibravatar Karsten Blees1-43/+139
With core.ignorecase=true, name-hash.c builds a case insensitive index of all tracked directories. Currently, the existing cache entry structures are added multiple times to the same hashtable (with different name lengths and hash codes). However, there's only one dir_next pointer, which gets completely messed up in case of hash collisions. In the worst case, this causes an endless loop if ce == ce->dir_next (see t7062). Use a separate hashtable and separate structures for the directory index so that each directory entry has its own next pointer. Use reference counting to track which directory entry contains files. There are only slight changes to the name-hash.c API: - new free_name_hash() used by read_cache.c::discard_index() - remove_name_hash() takes an additional index_state parameter - index_name_exists() for a directory (trailing '/') may return a cache entry that has been removed (CE_UNHASHED). This is not a problem as the return value is only used to check if the directory exists (dir.c) or to normalize casing of directory names (read-cache.c). Getting rid of cache_entry.dir_next reduces memory consumption, especially with core.ignorecase=false (which doesn't use that member at all). With core.ignorecase=true, building the directory index is slightly faster as we add / check the parent directory first (instead of going through all directory levels for each file in the index). E.g. with WebKit (~200k files, ~7k dirs), time spent in lazy_init_name_hash is reduced from 176ms to 130ms. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-19name-hash: allow hashing an empty stringLibravatar Junio C Hamano1-2/+2
Usually we do not pass an empty string to the function hash_name() because we almost always ask for hash values for a path that is a candidate to be added to the index. However, check-ignore (and most likely check-attr, but I didn't check) apparently has a callchain to ask the hash value for an empty path when it was given a "." from the top-level directory to ask "Is the path . excluded by default?" Make sure that hash_name() does not overrun the end of the given pathname even when it is empty. Remove a sweep-the-issue-under-the-rug conditional in check-ignore that avoided to pass an empty string to the callchain while at it. It is a valid question to ask for check-ignore if the top-level is set to be ignored by default, even though the answer is most likely no, if only because there is currently no way to specify such an entry in the .gitignore file. But it is an unusual thing to ask and it is not worth optimizing for it by special casing at the top level of the call chain. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-01name-hash.c: always initialize dir_next pointerLibravatar Johannes Sixt1-1/+1
Test t2021-checkout-overwrite.sh reveals a segfault in 'git add' on a case-insensitive file system when git is compiled with XMALLOC_POISON defined. The reason is that 2548183b (fix phantom untracked files when core.ignorecase is set) added a new member dir_next to struct cache_entry, but forgot to initialize it in all cases. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07fix phantom untracked files when core.ignorecase is setLibravatar Jeff King1-7/+8
When core.ignorecase is turned on and there are stale index entries, "git commit" can sometimes report directories as untracked, even though they contain tracked files. You can see an example of this with: # make a case-insensitive repo git init repo && cd repo && git config core.ignorecase true && # with some tracked files in a subdir mkdir subdir && > subdir/one && > subdir/two && git add . && git commit -m base && # now make the index entries stale touch subdir/* && # and then ask commit to update those entries and show # us the status template git commit -a which will report "subdir/" as untracked, even though it clearly contains two tracked files. What is happening in the commit program is this: 1. We load the index, and for each entry, insert it into the index's name_hash. In addition, if ignorecase is turned on, we make an entry in the name_hash for the directory (e.g., "contrib/"), which uses the following code from 5102c61's hash_index_entry_directories: hash = hash_name(ce->name, ptr - ce->name); if (!lookup_hash(hash, &istate->name_hash)) { pos = insert_hash(hash, &istate->name_hash); if (pos) { ce->next = *pos; *pos = ce; } } Note that we only add the directory entry if there is not already an entry. 2. We run add_files_to_cache, which gets updated information for each cache entry. It helpfully inserts this information into the cache, which calls replace_index_entry. This in turn calls remove_name_hash() on the old entry, and add_name_hash() on the new one. But remove_name_hash doesn't actually remove from the hash, it only marks it as "no longer interesting" (from cache.h): /* * We don't actually *remove* it, we can just mark it invalid so that * we won't find it in lookups. * * Not only would we have to search the lists (simple enough), but * we'd also have to rehash other hash buckets in case this makes the * hash bucket empty (common). So it's much better to just mark * it. */ static inline void remove_name_hash(struct cache_entry *ce) { ce->ce_flags |= CE_UNHASHED; } This is OK in the specific-file case, since the entries in the hash form a linked list, and we can just skip the "not here anymore" entries during lookup. But for the directory hash entry, we will _not_ write a new entry, because there is already one there: the old one that is actually no longer interesting! 3. While traversing the directories, we end up in the directory_exists_in_index_icase function to see if a directory is interesting. This in turn checks index_name_exists, which will look up the directory in the index's name_hash. We see the old, deleted record, and assume there is nothing interesting. The directory gets marked as untracked, even though there are index entries in it. The problem is in the code I showed above: hash = hash_name(ce->name, ptr - ce->name); if (!lookup_hash(hash, &istate->name_hash)) { pos = insert_hash(hash, &istate->name_hash); if (pos) { ce->next = *pos; *pos = ce; } } Having a single cache entry that represents the directory is not enough; that entry may go away if the index is changed. It may be tempting to say that the problem is in our removal method; if we removed the entry entirely instead of simply marking it as "not here anymore", then we would know we need to insert a new entry. But that only covers this particular case of remove-replace. In the more general case, consider something like this: 1. We add "foo/bar" and "foo/baz" to the index. Each gets their own entry in name_hash, plus we make a "foo/" entry that points to "foo/bar". 2. We remove the "foo/bar" entry from the index, and from the name_hash. 3. We ask if "foo/" exists, and see no entry, even though "foo/baz" exists. So we need that directory entry to have the list of _all_ cache entries that indicate that the directory is tracked. So that implies making a linked list as we do for other entries, like: hash = hash_name(ce->name, ptr - ce->name); pos = insert_hash(hash, &istate->name_hash); if (pos) { ce->next = *pos; *pos = ce; } But that's not right either. In fact, it shows a second bug in the current code, which is that the "ce->next" pointer is supposed to be linking entries for a specific filename entry, but here we are overwriting it for the directory entry. So the same cache entry ends up in two linked lists, but they share the same "next" pointer. As it turns out, this second bug can't be triggered in the current code. The "if (pos)" conditional is totally dead code; pos will only be non-NULL if there was an existing hash entry, and we already checked that there wasn't one through our call to lookup_hash. But fixing the first bug means taking out that call to lookup_hash, which is going to activate the buggy dead code, and we'll end up splicing the two linked lists together. So we need to have a separate next pointer for the list in the directory bucket, and we need to traverse that list in index_name_exists when we are looking up a directory. This bloats "struct cache_entry" by a few bytes. Which is annoying, because it's only necessary when core.ignorecase is enabled. There's not an easy way around it, short of separating out the "next" pointers from cache_entry entirely (i.e., having a separate "cache_entry_list" struct that gets stored in the name_hash). In practice, it probably doesn't matter; we have thousands of cache entries, compared to the millions of objects (where adding 4 bytes to the struct actually does impact performance). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06Add case insensitivity support for directories when using git statusLibravatar Joshua Jensen1-1/+71
When using a case preserving but case insensitive file system, directory case can differ but still refer to the same physical directory. git status reports the directory with the alternate case as an Untracked file. (That is, when mydir/filea.txt is added to the repository and then the directory on disk is renamed from mydir/ to MyDir/, git status shows MyDir/ as being untracked.) Support has been added in name-hash.c for hashing directories with a terminating slash into the name hash. When index_name_exists() is called with a directory (a name with a terminating slash), the name is not found via the normal cache_name_compare() call, but it is found in the slow_same_name() function. Additionally, in dir.c, directory_exists_in_index_icase() allows newly added directories deeper in the directory chain to be identified. Ultimately, it would be better if the file list was read in case insensitive alphabetical order from disk, but this change seems to suffice for now. The end result is the directory is looked up in a case insensitive manner and does not show in the Untracked files list. Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-09Make hash_name_lookup able to do case-independent lookupsLibravatar Linus Torvalds1-2/+48
Right now nobody uses it, but "index_name_exists()" gets a flag so you can enable it on a case-by-case basis. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-09Make "index_name_exists()" return the cache_entry it foundLibravatar Linus Torvalds1-3/+3
This allows verify_absent() in unpack_trees() to use the hash chains rather than looking it up using the binary search. Perhaps more importantly, it's also going to be useful for the next phase, where we actually start looking at the cache entry when we do case-insensitive lookups and checking the result. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-09Move name hashing functions into a file of its ownLibravatar Linus Torvalds1-0/+73
It's really totally separate functionality, and if we want to start doing case-insensitive hash lookups, I'd rather do it when it's separated out. It also renames "remove_index_entry()" to "remove_name_hash()", because that really describes the thing better. It doesn't actually remove the index entry, that's done by "remove_index_entry_at()", which is something very different, despite the similarity in names. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>