summaryrefslogtreecommitdiff
path: root/midx.h
AgeCommit message (Collapse)AuthorFilesLines
2018-10-18headers: normalize the spelling of some header guardsLibravatar Ramsay Jones1-2/+2
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-16Merge branch 'rj/header-check'Libravatar Junio C Hamano1-0/+3
Header files clean-up. * rj/header-check: delta-islands.h: add missing forward declarations (hdr-check) midx.h: add missing forward declarations (hdr-check) refs/refs-internal.h: add missing declarations (hdr-check) refs/packed-backend.h: add missing declaration (hdr-check) refs/ref-cache.h: add missing declarations (hdr-check) ewah/ewok_rlw.h: add missing include (hdr-check) json-writer.h: add missing include (hdr-check) Makefile: add a hdr-check target
2018-09-20midx.h: add missing forward declarations (hdr-check)Libravatar Ramsay Jones1-0/+3
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17multi-pack-index: add 'verify' verbLibravatar Derrick Stolee1-0/+1
The multi-pack-index builtin writes multi-pack-index files, and uses a 'write' verb to do so. Add a 'verify' verb that checks this file matches the contents of the pack-indexes it replaces. The current implementation is a no-op, but will be extended in small increments in later commits. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20packfile: add all_packs listLibravatar Derrick Stolee1-0/+1
If a repo contains a multi-pack-index, then the packed_git list does not contain the packfiles that are covered by the multi-pack-index. This is important for doing object lookups, abbreviations, and approximating object count. However, there are many operations that really want to iterate over all packfiles. Create a new 'all_packs' linked list that contains this list, starting with the packfiles in the multi-pack-index and then continuing along the packed_git linked list. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20multi-pack-index: store local propertyLibravatar Derrick Stolee1-2/+4
A pack-file is 'local' if it is stored within the usual object directory. If it is stored in an alternate, it is non-local. Pack-files are stored using a 'pack_local' member in the packed_git struct. Add a similar 'local' member to the multi_pack_index struct and 'local' parameters to the methods that load and prepare multi- pack-indexes. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: clear midx on repackLibravatar Derrick Stolee1-0/+1
If a 'git repack' command replaces existing packfiles, then we must clear the existing multi-pack-index before moving the packfiles it references. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: use existing midx when writing new oneLibravatar Derrick Stolee1-0/+1
Due to how Windows handles replacing a lockfile when there is an open handle, create the close_midx() method to close the existing midx before writing the new one. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: use midx in abbreviation calculationsLibravatar Derrick Stolee1-0/+3
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: read objects from multi-pack-indexLibravatar Derrick Stolee1-0/+3
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20config: create core.multiPackIndex settingLibravatar Derrick Stolee1-0/+5
The core.multiPackIndex config setting controls the multi-pack- index (MIDX) feature. If false, the setting will disable all reads from the multi-pack-index file. Read this config setting in the new prepare_multi_pack_index_one() which is called during prepare_packed_git(). This check is run once per repository. Add comparison commands in t5319-multi-pack-index.sh to check typical Git behavior remains the same as the config setting is turned on and off. This currently includes 'git rev-list' and 'git log' commands to trigger several object database reads. Currently, these would only catch an error in the prepare_multi_pack_index_one(), but with later commits will catch errors in object lookups, abbreviations, and approximate object counts. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: write object offsetsLibravatar Derrick Stolee1-0/+2
The final pair of chunks for the multi-pack-index file stores the object offsets. We default to using 32-bit offsets as in the pack-index version 1 format, but if there exists an offset larger than 32-bits, we use a trick similar to the pack-index version 2 format by storing all offsets at least 2^31 in a 64-bit table; we use the 32-bit table to point into that 64-bit table as necessary. We only store these 64-bit offsets if necessary, so create a test that manipulates a version 2 pack-index to fake a large offset. This allows us to test that the large offset table is created, but the data does not match the actual packfile offsets. The multi-pack-index offset does match the (corrupted) pack-index offset, so a future feature will compare these offsets during a 'verify' step. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: write object id fanout chunkLibravatar Derrick Stolee1-0/+1
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: write object ids in a chunkLibravatar Derrick Stolee1-0/+1
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20midx: read pack names into arrayLibravatar Derrick Stolee1-0/+1
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20multi-pack-index: write pack names in chunkLibravatar Derrick Stolee1-0/+2
The multi-pack-index needs to track which packfiles it indexes. Store these in our first required chunk. Since filenames are not well structured, add padding to keep good alignment in later chunks. Modify the 'git multi-pack-index read' subcommand to output the existence of the pack-file name chunk. Modify t5319-multi-pack-index.sh to reflect this new output and the new expected number of chunks. Defense in depth: A pattern we are using in the multi-pack-index feature is to verify the data as we write it. We want to ensure we never write invalid data to the multi-pack-index. There are many checks that verify that the values we are writing fit the format definitions. This mainly helps developers while working on the feature, but it can also identify issues that only appear when dealing with very large data sets. These large sets are hard to encode into test cases. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20multi-pack-index: load into memoryLibravatar Derrick Stolee1-0/+18
Create a new multi_pack_index struct for loading multi-pack-indexes into memory. Create a test-tool builtin for reading basic information about that multi-pack-index to verify the correct data is written. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20multi-pack-index: add 'write' verbLibravatar Derrick Stolee1-0/+6
In anticipation of writing multi-pack-indexes, add a skeleton 'git multi-pack-index write' subcommand and send the options to a write_midx_file() method. Also create a skeleton test script that tests the 'write' subcommand. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>