| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Newly added codepath in merge-recursive had potential buffer
overrun, which has been fixed.
* en/rename-directory-detection:
merge-recursive: use xstrdup() instead of fixed buffer
|
|
Paths can be longer than PATH_MAX. Avoid a buffer overrun in
check_dir_renamed() by using xstrdup() to make a private copy safely.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to a topic that already is in 'master'.
* sb/submodule-merge-in-merge-recursive:
merge-submodule: reduce output verbosity
|
|
The output shall behave more similar to ordinary file merges' output to provide
a more consistent user experience.
Signed-off-by: Leif Middelschulte <Leif.Middelschulte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leak plugging.
* ma/unpack-trees-free-msgs:
unpack_trees_options: free messages when done
argv-array: return the pushed string from argv_push*()
merge-recursive: provide pair of `unpack_trees_{start,finish}()`
merge: setup `opts` later in `checkout_fast_forward()`
|
|
By code restructuring of submodule merge in merge-recursive,
informational messages from the codepath are now given using the
same mechanism as other output, and honor the merge.verbosity
configuration. The code also learned to give a few new messages
when a submodule three-way merge resolves cleanly when one side
records a descendant of the commit chosen by the other side.
* sb/submodule-merge-in-merge-recursive:
merge-recursive: give notice when submodule commit gets fast-forwarded
merge-recursive: i18n submodule merge output and respect verbosity
submodule.c: move submodule merging to merge-recursive.c
|
|
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
|
|
With merge.renames configuration set to false, the recursive merge
strategy can be told not to spend cycles trying to find renamed
paths and merge them accordingly.
* bp/merge-rename-config:
merge: pass aggressive when rename detection is turned off
merge: add merge.renames config setting
merge: update documentation for {merge,diff}.renameLimit
|
|
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work. Incidentally, this also avoids updating a file in the
working tree after a (non-trivial) merge whose result matches what
our side originally had.
* en/rename-directory-detection-reboot: (36 commits)
merge-recursive: fix check for skipability of working tree updates
merge-recursive: make "Auto-merging" comment show for other merges
merge-recursive: fix remainder of was_dirty() to use original index
merge-recursive: fix was_tracked() to quit lying with some renamed paths
t6046: testcases checking whether updates can be skipped in a merge
merge-recursive: avoid triggering add_cacheinfo error with dirty mod
merge-recursive: move more is_dirty handling to merge_content
merge-recursive: improve add_cacheinfo error handling
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
...
|
|
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
|
|
The strings allocated in `setup_unpack_trees_porcelain()` are never
freed. Provide a function `clear_unpack_trees_porcelain()` to do so and
call it where we use `setup_unpack_trees_porcelain()`. The only
non-trivial user is `unpack_trees_start()`, where we should place the
new call in `unpack_trees_finish()`.
We keep the string pointers in an array, mixing pointers to static
memory and memory that we allocate on the heap. We also keep several
copies of the individual pointers. So we need to make sure that we do
not free what we must not free and that we do not double-free. Let a
separate argv_array take ownership of all the strings we create so that
we can easily free them.
Zero the whole array of string pointers to make sure that we do not
leave any dangling pointers.
Note that we only take responsibility for the memory allocated in
`setup_unpack_trees_porcelain()` and not any other members of the
`struct unpack_trees_options`.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `git_merge_trees()` to `unpack_trees_start()` and extract the
call to `discard_index()` into a new function `unpack_trees_finish()`.
As a result, these are called early resp. late in `merge_trees()`,
making the resource handling clearer. A later commit will expand on
that, teaching `..._finish()` to free more memory. (So rather than
moving the FIXME-comment, just drop it, since it will be addressed soon
enough.)
Also call `..._finish()` when `merge_trees()` returns early.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inform the user about an automatically fast-forwarded submodule. The
silent merge behavior was introduced by commit 68d03e4a6e44 ("Implement
automatic fast-forward merge for submodules", 2010-07-07)).
Signed-off-by: Leif Middelschulte <Leif.Middelschulte@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The submodule merge code now uses the output() function that is used by
all the rest of the merge-recursive-code. This allows for respecting
internationalisation as well as the verbosity setting.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later patch we want to improve submodule merging by using the output()
function in merge-recursive.c for submodule merges to deliver a consistent
UI to users.
To do so we could either make the output() function globally available
so we can use it in submodule.c#merge_submodule(), or we could integrate
the submodule merging into the merging code. Choose the later as we
generally want to move submodules closer into the core.
Therefore we move any function related to merging submodules
(merge_submodule(), find_first_merges() and print_commit) to
merge-recursive.c. We'll keep add_submodule_odb() in submodule.c as it
is used by other submodule functions. While at it, add a TODO note that
we do not really like the function add_submodule_odb().
This commit is best viewed with --color-moved.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Set aggressive flag in git_merge_trees() when rename detection is turned off.
This allows read_tree() to auto resolve more cases that would have otherwise
been handled by the rename detection.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the ability to control rename detection for merge via a config setting.
This setting behaves the same and defaults to the value of diff.renames but only
applies to merge.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The can-working-tree-updates-be-skipped check has had a long and blemished
history. The update can be skipped iff:
a) The merge is clean
b) The merge matches what was in HEAD (content, mode, pathname)
c) The target path is usable (i.e. not involved in D/F conflict)
Traditionally, we split b into parts:
b1) The merged result matches the content and mode found in HEAD
b2) The merged target path existed in HEAD
Steps a & b1 are easy to check; we have always gotten those right. While
it is easy to overlook step c, this was fixed seven years ago with commit
4ab9a157d069 ("merge_content(): Check whether D/F conflicts are still
present", 2010-09-20). merge-recursive didn't have a readily available
way to directly check step b2, so various approximations were used:
* In commit b2c8c0a76274 ("merge-recursive: When we detect we can skip
an update, actually skip it", 2011-02-28), it was noted that although
the code claimed it was skipping the update, it did not actually skip
the update. The code was made to skip it, but used lstat(path, ...)
as an approximation to path-was-tracked-in-index-before-merge.
* In commit 5b448b853030 ("merge-recursive: When we detect we can skip
an update, actually skip it", 2011-08-11), the problem with using
lstat was noted. It was changed to the approximation
path2 && strcmp(path, path2)
which is also wrong. !path2 || strcmp(path, path2) would have been
better, but would have fallen short with directory renames.
* In c5b761fb2711 ("merge-recursive: ensure we write updates for
directory-renamed file", 2018-02-14), the problem with the previous
approximation was noted and changed to
was_tracked(path)
That looks close to what we were trying to answer, but was_tracked()
as implemented at the time should have been named is_tracked(); it
returned something different than what we were looking for.
* To make matters more complex, fixing was_tracked() isn't sufficient
because the splitting of b into b1 and b2 is wrong. Consider the
following merge with a rename/add conflict:
side A: modify foo, add unrelated bar
side B: rename foo->bar (but don't modify the mode or contents)
In this case, the three-way merge of original foo, A's foo, and B's
bar will result in a desired pathname of bar with the same
mode/contents that A had for foo. Thus, A had the right mode and
contents for the file, and it had the right pathname present (namely,
bar), but the bar that was present was unrelated to the contents, so
the working tree update was not skippable.
Fix this by introducing a new function:
was_tracked_and_matches(o, path, &mfi.oid, mfi.mode)
and use it to directly check for condition b.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, merge_content() would print "Auto-merging" whenever the final
content and mode aren't already available from HEAD. There are a few
problems with this:
1) There are other code paths doing merges that should probably have the
same message printed, in particular rename/rename(2to1) which cannot
call into the normal rename logic.
2) If both sides of the merge have modifications, then a content merge
is needed. It may turn out that the end result matches one of the
sides (because the other only had a subset of the same changes), but
the merge was still needed. Currently, the message will not print in
that case, though it seems like it should.
Move the printing of this message to merge_file_1() in order to address
both issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
was_dirty() uses was_tracked(), which has been updated to use the original
index rather than the current one. However, was_dirty() also had a
separate call to cache_file_exists(), causing it to still implicitly use
the current index. Update that to instead use index_file_exists().
Also, was_dirty() had a hack where it would mark any file as non-dirty if
we simply didn't know its modification time. This was due to using the
current index rather than the original index, because D/F conflicts and
such would cause unpack_trees() to not copy the modification times from
the original index to the current one. Now that we are using the original
index, we can dispense with this hack.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit aacb82de3ff8 ("merge-recursive: Split was_tracked() out of
would_lose_untracked()", 2011-08-11), was_tracked() was split out of
would_lose_untracked() with the intent to provide a function that could
answer whether a path was tracked in the index before the merge. Sadly,
it instead returned whether the path was in the working tree due to having
been tracked in the index before the merge OR having been written there by
unpack_trees(). The distinction is important when renames are involved,
e.g. for a merge where:
HEAD: modifies path b
other: renames b->c
In this case, c was not tracked in the index before the merge, but would
have been added to the index at stage 0 and written to the working tree by
unpack_trees(). would_lose_untracked() is more interested in the
in-working-copy-for-either-reason behavior, while all other uses of
was_tracked() want just was-it-tracked-in-index-before-merge behavior.
Unsplit would_lose_untracked() and write a new was_tracked() function
which answers whether a path was tracked in the index before the merge
started.
This will also affect was_dirty(), helping it to return better results
since it can base answers off the original index rather than an index that
possibly only copied over some of the stat information. However,
was_dirty() will need an additional change that will be made in a
subsequent patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a cherry-pick or merge with a rename results in a skippable update
(due to the merged content matching what HEAD already had), but the
working directory is dirty, avoid trying to refresh the index as that
will fail.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
conflict_rename_normal() was doing some handling for dirty files that
more naturally belonged in merge_content. Move it, and rename a
parameter for clarity while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Four closely related changes all with the purpose of fixing error handling
in this function:
- fix reported function name in add_cacheinfo error messages
- differentiate between the two error messages
- abort early when we hit the error (stop ignoring return code)
- mark a test which was hitting this error as failing until we get the
right fix
In more detail...
In commit 0424138d5715 ("Fix bogus error message from merge-recursive
error path", 2007-04-01), it was noted that the name of the function which
the error message claimed it was reported from did not match the actual
function name. This was changed to something closer to the real function
name, but it still didn't match the actual function name. Fix the
reported name to match.
Second, the two errors in this function had identical messages, preventing
us from knowing which error had been triggered. Add a couple words to the
second error message to differentiate the two.
Next, make sure callers do not ignore the return code so that it will stop
processing further entries (processing further entries could result in
more output which could cause the error to scroll off the screen, or at
least be missed by the user) and make it clear the error is the cause of
the early abort. These errors should never be triggered in production; if
either one is, it represents a bug in the calling path somewhere and is
likely to have resulted in mis-merged content. The combination of
ignoring of the return code and continuing to print other standard
messages after hitting the error resulted in the following bug report from
Junio: "...the command pretends that everything went well and merged
cleanly in that path...[Behaving] in a buggy and unexplainable way is bad
enough, doing so silently is unexcusable." Fix this.
Finally, there was one test in the testsuite that did hit this error path,
but was passing anyway. This would have been easy to miss since it had a
test_must_fail and thus could have failed for the wrong reason, but in a
separate testing step I added an intentional NULL-dereference to the
codepath where these error messages are printed in order to flush out such
cases. I could modify that test to explicitly check for this error and
fail the test if it is hit, but since this test operates in a bit of a
gray area and needed other changes, I went for a different fix. The gray
area this test operates in is the following: If the merge of a certain
file results in the same version of the file that existed in HEAD, but
there are dirty modifications to the file, is that an error with a
"Refusing to overwrite existing file" expected, or a case where the merge
should succeed since we shouldn't have to touch the dirty file anyway?
Recent discussion on the list leaned towards saying it should be a
success. Therefore, change the expected behavior of this test to match.
As a side effect, this makes the failed-due-to-hitting-add_cacheinfo-error
very clear, and we can mark the test as test_expect_failure. A subsequent
commit will implement the necessary changes to get this test to pass
again.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a file on one side of history was renamed, and merely modified on the
other side, then applying a directory rename to the modified side gives us
a rename/rename(1to2) conflict. We should only apply directory renames to
pairs representing either adds or renames.
Making this change means that a directory rename testcase that was
previously reported as a rename/delete conflict will now be reported as a
modify/delete conflict.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes an issue that existed before my directory rename detection
patches that affects both normal renames and renames implied by
directory rename detection. Additional codepaths that only affect
overwriting of dirty files that are involved in directory rename
detection will be added in a subsequent commit.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit hooks together all the directory rename logic by making the
necessary changes to the rename struct, it's dst_entry, and the
diff_filepair under consideration.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_renames() would look up stage data that already existed (populated
in get_unmerged(), taken from whatever unpack_trees() created), and if
it didn't exist, would call insert_stage_data() to create the necessary
entry for the given file. The insert_stage_data() fallback becomes
much more important for directory rename detection, because that creates
a mechanism to have a file in the resulting merge that didn't exist on
either side of history. However, insert_stage_data(), due to calling
get_tree_entry() loaded up trees as readily as files. We aren't
interested in comparing trees to files; the D/F conflict handling is
done elsewhere. This code is just concerned with what entries existed
for a given path on the different sides of the merge, so create a
get_tree_entry_if_blob() helper function and use it.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before trying to apply directory renames to paths within the given
directories, we want to make sure that there aren't conflicts at the
file level either. If there aren't any, then get the new name from
any directory renames.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
directory renaming and merging can cause one or more files to be moved to
where an existing file is, or to cause several files to all be moved to
the same (otherwise vacant) location. Add checking and reporting for such
cases, falling back to no-directory-rename handling for such paths.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before trying to apply directory renames to paths within the given
directories, we want to make sure that there aren't conflicts at the
directory level. There will be additional checks at the individual
file level too, which will be added later.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This populates a set of directory renames for us. The set of directory
renames is not yet used, but will be in subsequent commits.
Note that the use of a string_list for possible_new_dirs in the new
dir_rename_entry struct implies an O(n^2) algorithm; however, in practice
I expect the number of distinct directories that files were renamed into
from a single original directory to be O(1). My guess is that n has a
mode of 1 and a mean of less than 2, so, for now, string_list seems good
enough for possible_new_dirs.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In anticipation of more involved cleanup to come, make a helper function
for doing the cleanup at the end of handle_renames. Rename the already
existing cleanup_rename[s]() to final_cleanup_rename[s](), name the new
helper initial_cleanup_rename(), and leave the big comment in the code
about why we can't do all the cleanup at once.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a new function, get_diffpairs() to compute the diff_filepairs
between two trees. While these are currently only used in
get_renames(), I want them to be available to some new functions. No
actual logic changes yet.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, if !o->detect_rename then get_renames() would return an
empty string_list, and then process_renames() would have nothing to
iterate over. It seems more straightforward to simply avoid calling
either function in that case.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_renames() has always zero'ed out diff_queued_diff.nr while only
manually free'ing diff_filepairs that did not correspond to renames.
Further, it allocated struct renames that were tucked away in the
return string_list. Make sure all of these are deallocated when we
are done with them.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The amount of logic in merge_trees() relative to renames was just a few
lines, but split it out into new handle_renames() and cleanup_renames()
functions to prepare for additional logic to be added to each. No code or
logic changes, just a new place to put stuff for when the rename detection
gains additional checks.
Note that process_renames() records pointers to various information (such
as diff_filepairs) into rename_conflict_info structs. Even though the
rename string_lists are not directly used once handle_renames() completes,
we should not immediately free the lists at the end of that function
because they store the information referenced in the rename_conflict_info,
which is used later in process_entry(). Thus the reason for a separate
cleanup_renames().
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move this function so it can re-use some others (without either
moving all of them or adding an annoying split between function
declarations and definitions). Cheat slightly by adding a blank line
for readability, and in order to silence checkpatch.pl.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit e4bb62fa1eeee689744b413e29a50b4d1dae6886, reversing
changes made to 468165c1d8a442994a825f3684528361727cd8c0.
The topic appears to inflict severe regression in renaming merges,
even though the promise of it was that it would improve them.
We do not yet know which exact change in the topic was wrong, but in
the meantime, let's play it safe and revert it out of 'master'
before real Git-using projects are harmed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
|
|
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work.
* en/rename-directory-detection: (29 commits)
merge-recursive: ensure we write updates for directory-renamed file
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
merge-recursive: split out code for determining diff_filepairs
merge-recursive: make !o->detect_rename codepath more obvious
merge-recursive: fix leaks of allocated renames and diff_filepairs
merge-recursive: introduce new functions to handle rename logic
merge-recursive: move the get_renames() function
directory rename detection: tests for handling overwriting dirty files
directory rename detection: tests for handling overwriting untracked files
...
|
|
Compilation fix.
* rj/warning-uninitialized-fix:
read-cache: fix an -Wmaybe-uninitialized warning
-Wuninitialized: remove some 'init-self' workarounds
|
|
The 'self-initialised' variables construct (ie <type> var = var;) has
been used to silence gcc '-W[maybe-]uninitialized' warnings. This has,
unfortunately, caused MSVC to issue 'uninitialized variable' warnings.
Also, using clang static analysis causes complaints about an 'Assigned
value is garbage or undefined'.
There are six such constructs in the current codebase. Only one of the
six causes gcc to issue a '-Wmaybe-uninitialized' warning (which will
be addressed elsewhere). The remaining five 'init-self' gcc workarounds
are noted below, along with the commit which introduced them:
1. builtin/rev-list.c: 'reaches' and 'all', see commit 457f08a030
("git-rev-list: add --bisect-vars option.", 2007-03-21).
2. merge-recursive.c:2064 'mrtree', see commit f120ae2a8e ("merge-
recursive.c: mrtree in merge() is not used before set", 2007-10-29).
3. fast-import.c:3023 'oe', see commit 85c62395b1 ("fast-import: let
importers retrieve blobs", 2010-11-28).
4. fast-import.c:3006 'oe', see commit 28c7b1f7b7 ("fast-import: add a
get-mark command", 2015-07-01).
Remove the 'self-initialised' variable constructs noted above.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert get_tree_entry and find_tree_entry to take pointers to struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
René Scharfe
Leif Middelschulte
Martin Ågren
Elijah Newren
Stefan Beller
Ben Peart
Johannes Schindelin
Derrick Stolee
Ramsay Jones
brian m. carlson