summaryrefslogtreecommitdiff
path: root/merge-recursive.c
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16commit: move reverse_commit_list() from merge-recursiveLibravatar Elijah Newren1-11/+0
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-02hashmap: provide deallocation function namesLibravatar Elijah Newren1-3/+3
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed for a while, but aren't necessarily the clearest names, especially with hashmap_partial_clear() being added to the mix and lazy-initialization now being supported. Peff suggested we adopt the following names[1]: - hashmap_clear() - remove all entries and de-allocate any hashmap-specific data, but be ready for reuse - hashmap_clear_and_free() - ditto, but free the entries themselves - hashmap_partial_clear() - remove all entries but don't deallocate table - hashmap_partial_clear_and_free() - ditto, but free the entries This patch provides the new names and converts all existing callers over to the new naming scheme. [1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/ Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-10Merge branch 'en/eol-attrs-gotchas'Libravatar Junio C Hamano1-0/+3
All "mergy" operations that internally use the merge-recursive machinery should honor the merge.renormalize configuration, but many of them didn't. * en/eol-attrs-gotchas: checkout: support renormalization with checkout -m <paths> merge: make merge.renormalize work for all uses of merge machinery t6038: remove problematic test t6038: make tests fail for the right reason
2020-08-03merge: make merge.renormalize work for all uses of merge machineryLibravatar Elijah Newren1-0/+3
The 'merge' command is not the only one that does merges; other commands like checkout -m or rebase do as well. Unfortunately, the only area of the code that checked for the "merge.renormalize" config setting was in builtin/merge.c, meaning it could only affect merges performed by the "merge" command. Move the handling of this config setting to merge_recursive_config() so that other commands can benefit from it as well. Fixes a few tests in t6038. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-02merge-recursive: fix unclear and outright wrong commentsLibravatar Elijah Newren1-2/+3
Commits 7c0a6c8e47 ("merge-recursive: move some definitions around to clean up the header", 2019-08-17), and b4db8a2b76 ("merge-recursive: remove useless parameter in merge_trees()", 2019-08-17) added some useful documentation to the functions, but had a few places where the new comments were unclear or even misleading. Fix those comments. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-14merge-recursive: fix rename/rename(1to2) for working tree with a binaryLibravatar Elijah Newren1-0/+12
With a rename/rename(1to2) conflict, we attempt to do a three-way merge of the file contents, so that the correct contents can be placed in the working tree at both paths. If the file is a binary, however, no content merging is possible and we should just use the original version of the file at each of the paths. Reported-by: Chunlin Zhang <zhangchunlin@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-16convert: permit passing additional metadata to filter processesLibravatar brian m. carlson1-1/+1
There are a variety of situations where a filter process can make use of some additional metadata. For example, some people find the ident filter too limiting and would like to include the commit or the branch in their smudged files. This information isn't available during checkout as HEAD hasn't been updated at that point, and it wouldn't be available in archives either. Let's add a way to pass this metadata down to the filter. We pass the blob we're operating on, the treeish (preferring the commit over the tree if one exists), and the ref we're operating on. Note that we won't pass this information in all cases, such as when renormalizing or when we're performing diffs, since it doesn't make sense in those cases. The data we currently get from the filter process looks like the following: command=smudge pathname=git.c 0000 With this change, we'll get data more like this: command=smudge pathname=git.c refname=refs/tags/v2.25.1 treeish=c522f061d551c9bb8684a7c3859b2ece4499b56b blob=7be7ad34bd053884ec48923706e70c81719a8660 0000 There are a couple things to note about this approach. For operations like checkout, treeish will always be a commit, since we cannot check out individual trees, but for other operations, like archive, we can end up operating on only a particular tree, so we'll provide only a tree as the treeish. Similar comments apply for refname, since there are a variety of cases in which we won't have a ref. This commit wires up the code to print this information, but doesn't pass any of it at this point. In a future commit, we'll have various code paths pass the actual useful data down. Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-09Merge branch 'en/merge-path-collision'Libravatar Junio C Hamano1-105/+47
Handling of conflicting renames in merge-recursive have further been made consistent with how existing codepaths try to mimic what is done to add/add conflicts. * en/merge-path-collision: merge-recursive: apply collision handling unification to recursive case
2020-03-02Merge branch 'en/t3433-rebase-stat-dirty-failure'Libravatar Junio C Hamano1-2/+5
The merge-recursive machinery failed to refresh the cache entry for a merge result in a couple of places, resulting in an unnecessary merge failure, which has been fixed. * en/t3433-rebase-stat-dirty-failure: merge-recursive: fix the refresh logic in update_file_flags t3433: new rebase testcase documenting a stat-dirty-like failure
2020-02-27merge-recursive: apply collision handling unification to recursive caseLibravatar Elijah Newren1-105/+47
In the en/merge-path-collision topic (see commit ac193e0e0aa5, "Merge branch 'en/merge-path-collision'", 2019-01-04), all the "file collision" conflict types were modified for consistency. In particular, rename/add, rename/rename(2to1) and each rename/add piece of a rename/rename(1to2)/add[/add] conflict were made to behave like add/add conflicts have always been handled. However, this consistency was not enforced when opt->priv->call_depth > 0 for rename/rename conflicts. Update rename/rename(1to2) and rename/rename(2to1) conflicts in the recursive case to also be consistent. As an added bonus, this simplifies the code considerably. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-19merge-recursive: fix the refresh logic in update_file_flagsLibravatar Elijah Newren1-2/+5
If we need to delete a higher stage entry in the index to place the file at stage 0, then we'll lose that file's stat information. In such situations we may still be able to detect that the file on disk is the version we want (as noted by our comment in the code: /* do not overwrite file if already present */ ), but we do still need to update the mtime since we are creating a new cache_entry for that file. Update the logic used to determine whether we refresh a file's mtime. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-27merge-recursive: use subtraction to flip stageLibravatar Junio C Hamano1-3/+2
The flip_stage() helper uses a bit-flipping xor to switch between "2" and "3". While clever, this relies on a property of those two numbers that is mostly coincidence. Let's write it as a subtraction; that's more clear and would extend to other numbers if somebody copies the logic. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-27merge-recursive: silence -Wxor-used-as-pow warningLibravatar Jeff King1-5/+14
The merge-recursive code uses stage number constants like this: add = &ci->ren1->dst_entry->stages[2 ^ 1]; ... add = &ci->ren2->dst_entry->stages[3 ^ 1]; The xor has the effect of flipping the "1" bit, so that "2 ^ 1" becomes "3" and "3 ^ 1" becomes "2", which correspond to the "ours" and "theirs" stages respectively. Unfortunately, clang-10 and up issue a warning for this code: merge-recursive.c:1759:40: error: result of '2 ^ 1' is 3; did you mean '1 << 1' (2)? [-Werror,-Wxor-used-as-pow] add = &ci->ren1->dst_entry->stages[2 ^ 1]; ~~^~~ 1 << 1 merge-recursive.c:1759:40: note: replace expression with '0x2 ^ 1' to silence this warning We could silence it by using 0x2, as the compiler mentions. Or by just using the constants "2" and "3" directly. But after digging into it, I do think this bit-flip is telling us something. If we just wrote: add = &ci->ren2->dst_entry->stages[2]; for the second one, you might think that "ren2" and "2" correspond. But they don't. The logic is: ren2 is theirs, which is stage 3, but we are interested in the opposite side's stage, so flip it to 2. So let's keep the bit-flipping, but let's also put it behind a named function, which will make its purpose a bit clearer. This also has the side effect of suppressing the warning (and an optimizing compiler should be able to easily turn it into a constant as before). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-06Merge branch 'en/merge-recursive-oid-eq-simplify'Libravatar Junio C Hamano1-22/+11
Code cleanup. * en/merge-recursive-oid-eq-simplify: merge-recursive: remove unnecessary oid_eq function
2020-01-02merge-recursive: remove unnecessary oid_eq functionLibravatar Elijah Newren1-22/+11
Back when merge-recursive was first introduced in commit 6d297f8137 (Status update on merge-recursive in C, 2006-07-08), it created a sha_eq() function. This function pre-dated the introduction of hashcmp() to cache.h by about a month, but was switched over to using hashcmp() as part of commit 9047ebbc22 (Split out merge_recursive() to merge-recursive.c, 2008-08-12). In commit b4da9d62f9 (merge-recursive: convert leaf functions to use struct object_id, 2016-06-24), sha_eq() was renamed to oid_eq() and its hashcmp() call was switched to oideq(). oid_eq() is basically just a wrapper around oideq() that has some extra checks to protect against NULL arguments or to allow short-circuiting if one of the arguments is NULL. I don't know if any caller ever tried to call with NULL arguments, but certainly none do now which means the extra checks serve no purpose. (Also, if these checks were genuinely useful, then they probably should be added to the main oideq() so all callers could benefit from them.) Reduce the cognitive overhead of having both oid_eq() and oideq(), by getting rid of merge-recursive's special oid_eq() wrapper. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-10Merge branch 'en/merge-recursive-directory-rename-fixes'Libravatar Junio C Hamano1-23/+81
When all files from some subdirectory were renamed to the root directory, the directory rename heuristics would fail to detect that as a rename/merge of the subdirectory to the root directory, which has been corrected. * en/merge-recursive-directory-rename-fixes: t604[236]: do not run setup in separate tests merge-recursive: fix merging a subdirectory into the root directory merge-recursive: clean up get_renamed_dir_portion()
2019-10-23merge-recursive: fix merging a subdirectory into the root directoryLibravatar Elijah Newren1-3/+49
We allow renaming all entries in e.g. a directory named z/ into a directory named y/ to be detected as a z/ -> y/ rename, so that if the other side of history adds any files to the directory z/ in the mean time, we can provide the hint that they should be moved to y/. There is no reason to not allow 'y/' to be the root directory, but the code did not handle that case correctly. Add a testcase and the necessary special checks to support this case. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-23merge-recursive: clean up get_renamed_dir_portion()Libravatar Elijah Newren1-24/+36
Dscho noted a few things making this function hard to follow. Restructure it a bit and add comments to make it easier to follow. The restructurings include: * There was a special case if-check at the end of the function checking whether someone just renamed a file within its original directory, meaning that there could be no directory rename involved. That check was slightly convoluted; it could be done in a more straightforward fashion earlier in the function, and can be done more cheaply too (no call to strncmp). * The conditions for advancing end_of_old and end_of_new before calling strchr were both confusing and unnecessary. If either points at a '/', then they need to be advanced in order to find the next '/'. If either doesn't point at a '/', then advancing them one char before calling strchr() doesn't hurt. So, just rip out the if conditions and advance both before calling strchr(). Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-15Merge branch 'ew/hashmap'Libravatar Junio C Hamano1-40/+51
Code clean-up of the hashmap API, both users and implementation. * ew/hashmap: hashmap_entry: remove first member requirement from docs hashmap: remove type arg from hashmap_{get,put,remove}_entry OFFSETOF_VAR macro to simplify hashmap iterators hashmap: introduce hashmap_free_entries hashmap: hashmap_{put,remove} return hashmap_entry * hashmap: use *_entry APIs for iteration hashmap_cmp_fn takes hashmap_entry params hashmap_get{,_from_hash} return "struct hashmap_entry *" hashmap: use *_entry APIs to wrap container_of hashmap_get_next returns "struct hashmap_entry *" introduce container_of macro hashmap_put takes "struct hashmap_entry *" hashmap_remove takes "const struct hashmap_entry *" hashmap_get takes "const struct hashmap_entry *" hashmap_add takes "struct hashmap_entry *" hashmap_get_next takes "const struct hashmap_entry *" hashmap_entry_init takes "struct hashmap_entry *" packfile: use hashmap_entry in delta_base_cache_entry coccicheck: detect hashmap_entry.hash assignment diff: use hashmap_entry_init on moved_entry.ent
2019-10-15Merge branch 'en/merge-recursive-cleanup'Libravatar Junio C Hamano1-226/+346
The merge-recursive machiery is one of the most complex parts of the system that accumulated cruft over time. This large series cleans up the implementation quite a bit. * en/merge-recursive-cleanup: (26 commits) merge-recursive: fix the fix to the diff3 common ancestor label merge-recursive: fix the diff3 common ancestor label for virtual commits merge-recursive: alphabetize include list merge-recursive: add sanity checks for relevant merge_options merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_* merge-recursive: split internal fields into a separate struct merge-recursive: avoid losing output and leaking memory holding that output merge-recursive: comment and reorder the merge_options fields merge-recursive: consolidate unnecessary fields in merge_options merge-recursive: move some definitions around to clean up the header merge-recursive: rename merge_options argument to opt in header merge-recursive: rename 'mrtree' to 'result_tree', for clarity merge-recursive: use common name for ancestors/common/base_list merge-recursive: fix some overly long lines cache-tree: share code between functions writing an index as a tree merge-recursive: don't force external callers to do our logging merge-recursive: remove useless parameter in merge_trees() merge-recursive: exit early if index != head Ensure index matches head before invoking merge machinery, round N merge-recursive: remove another implicit dependency on the_repository ...
2019-10-08merge-recursive: fix the fix to the diff3 common ancestor labelLibravatar Elijah Newren1-1/+2
In commit 8e4ec337 ("merge-recursive: fix the diff3 common ancestor label for virtual commits", 2019-10-01), which was a fix to commit 743474cbfa8b ("merge-recursive: provide a better label for diff3 common ancestor", 2019-08-17), the label for the common ancestor was changed from always being "merged common ancestors" to instead be based on the number of merge bases and whether the merge base was a real commit or a virtual one: >=2: "merged common ancestors" 1, via merge_recursive_generic: "constructed merge base" 1, otherwise: <abbreviated commit hash> 0: "<empty tree>" The handling for "constructed merge base" worked by allowing opt->ancestor to be set in merge_recursive_generic(), so we paid attention to the setting of that variable in merge_recursive_internal(). Now, for the outer merge, the code flow was simply the following: ancestor_name = "merged merge bases" loop over merge_bases: merge_recursive_internal() The first merge base not needing recursion would determine its own ancestor_name however necessary and thus run ancestor_name = $SOMETHING empty loop over merge_bases... opt->ancestor = ancestor_name merge_trees_internal() Now, the next set of merge_bases that would need to be merged after this particular merge had completed would note that opt->ancestor has been set to something (to a local ancestor_name variable that has since been popped off the stack), and thus it would run: ... else if (opt->ancestor) { ancestor_name = opt->ancestor; /* OOPS! */ loop over merge_bases: merge_recursive_internal() opt->ancestor = ancestor_name merge_trees_internal() This resulted in garbage strings being printed for the virtual merge bases, which was visible in git.git by just merging commit b744c3af07 into commit 6d8cb22a4f. There are two ways to fix this: set opt->ancestor to NULL after using it to avoid re-use, or add a !opt->priv->call_depth check to the if block for using a pre-defined opt->ancestor. Apply both fixes. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap: remove type arg from hashmap_{get,put,remove}_entryLibravatar Eric Wong1-4/+2
Since these macros already take a `keyvar' pointer of a known type, we can rely on OFFSETOF_VAR to get the correct offset without relying on non-portable `__typeof__' and `offsetof'. Argument order is also rearranged, so `keyvar' and `member' are sequential as they are used as: `keyvar->member' Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07OFFSETOF_VAR macro to simplify hashmap iteratorsLibravatar Eric Wong1-5/+0
While we cannot rely on a `__typeof__' operator being portable to use with `offsetof'; we can calculate the pointer offset using an existing pointer and the address of a member using pointer arithmetic for compilers without `__typeof__'. This allows us to simplify usage of hashmap iterator macros by not having to specify a type when a pointer of that type is already given. In the future, list iterator macros (e.g. list_for_each_entry) may also be implemented using OFFSETOF_VAR to save hackers the trouble of using container_of/list_entry macros and without relying on non-portable `__typeof__'. v3: use `__typeof__' to avoid clang warnings Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap: introduce hashmap_free_entriesLibravatar Eric Wong1-3/+4
`hashmap_free_entries' behaves like `container_of' and passes the offset of the hashmap_entry struct to the internal `hashmap_free_' function, allowing the function to free any struct pointer regardless of where the hashmap_entry field is located. `hashmap_free' no longer takes any arguments aside from the hashmap itself. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap: use *_entry APIs for iterationLibravatar Eric Wong1-10/+15
Inspired by list_for_each_entry in the Linux kernel. Once again, these are somewhat compromised usability-wise by compilers lacking __typeof__ support. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_cmp_fn takes hashmap_entry paramsLibravatar Eric Wong1-12/+21
Another step in eliminating the requirement of hashmap_entry being the first member of a struct. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_get{,_from_hash} return "struct hashmap_entry *"Libravatar Eric Wong1-2/+4
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash or container_of as appropriate. This is another step towards eliminating the requirement of hashmap_entry being the first field in a struct. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_put takes "struct hashmap_entry *"Libravatar Eric Wong1-2/+2
This is less error-prone than "void *" as the compiler now detects invalid types being passed. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_remove takes "const struct hashmap_entry *"Libravatar Eric Wong1-1/+1
This is less error-prone than "const void *" as the compiler now detects invalid types being passed. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_get takes "const struct hashmap_entry *"Libravatar Eric Wong1-2/+2
This is less error-prone than "const void *" as the compiler now detects invalid types being passed. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_add takes "struct hashmap_entry *"Libravatar Eric Wong1-2/+2
This is less error-prone than "void *" as the compiler now detects invalid types being passed. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_entry_init takes "struct hashmap_entry *"Libravatar Eric Wong1-6/+7
C compilers do type checking to make life easier for us. So rely on that and update all hashmap_entry_init callers to take "struct hashmap_entry *" to avoid future bugs while improving safety and readability. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-02merge-recursive: fix the diff3 common ancestor label for virtual commitsLibravatar Elijah Newren1-1/+6
In commit 743474cbfa8b ("merge-recursive: provide a better label for diff3 common ancestor", 2019-08-17), the label for the common ancestor was changed from always being "merged common ancestors" to instead be based on the number of merge bases: >=2: "merged common ancestors" 1: <abbreviated commit hash> 0: "<empty tree>" Unfortunately, this did not take into account that when we have a single merge base, that merge base could be fake or constructed. In such cases, this resulted in a label of "00000000". Of course, the previous label of "merged common ancestors" was also misleading for this case. Since we have an API that is explicitly about creating fake merge base commits in merge_recursive_generic(), we should provide a better label when using that API with one merge base. So, when merge_recursive_generic() is called with one merge base, set the label to: "constructed merge base" Note that callers of merge_recursive_generic() include the builtin commands git-am (in combination with git apply --build-fake-ancestor), git-merge-recursive, and git-stash. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-20merge-recursive: symlink's descendants not in wayLibravatar Jonathan Tan1-1/+2
When the working tree has: - bar (directory) - bar/file (file) - foo (symlink to .) (note that lstat() for "foo/bar" would tell us that it is a directory) and the user merges a commit that deletes the foo symlink and instead contains: - bar (directory, as above) - bar/file (file, as above) - foo (directory) - foo/bar (file) the merge should happen without requiring user intervention. However, this does not happen. This is because dir_in_way(), when checking the working tree, thinks that "foo/bar" is a directory. But a symlink should be treated much the same as a file: since dir_in_way() is only checking to see if there is a directory in the way, we don't want symlinks in leading paths to sometimes cause dir_in_way() to return true. Teach dir_in_way() to also check for symlinks in leading paths before reporting whether a directory is in the way. Helped-by: Elijah Newren <newren@gmail.com> Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: alphabetize include listLibravatar Elijah Newren1-16/+17
Other than cache.h which needs to appear first, and merge-recursive.h which I want to be second so that we are more likely to notice if merge-recursive.h has any missing includes, the rest of the list is long and easier to look through if it's alphabetical. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: add sanity checks for relevant merge_optionsLibravatar Elijah Newren1-0/+24
There are lots of options that callers can set, yet most have a limited range of valid values, some options are meant for output (e.g. opt->obuf, which is expected to start empty), and callers are expected to not set opt->priv. Add several sanity checks to ensure callers provide sane values. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_*Libravatar Elijah Newren1-7/+7
I want to implement the same outward facing API as found within merge-recursive.h in a different merge strategy. However, that makes names like MERGE_RECURSIVE_{NORMAL,OURS,THEIRS} look a little funny; rename to MERGE_VARIANT_{NORMAL,OURS,THEIRS}. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: split internal fields into a separate structLibravatar Elijah Newren1-87/+98
merge_options has several internal fields that should not be set or read by external callers. This just complicates the API. Move them into an opaque merge_options_internal struct that is defined only in merge-recursive.c and keep these out of merge-recursive.h. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: avoid losing output and leaking memory holding that outputLibravatar Elijah Newren1-3/+3
If opt->buffer_output is less than 2, then merge_trees(), merge_recursive(), and merge_recursive_generic() are all supposed to flush the opt->obuf output buffer to stdout and release any memory it holds. merge_trees() did not do this. Move the logic that handles this for merge_recursive_internal() to merge_finalize() so that all three methods handle this requirement. Note that this bug didn't cause any problems currently, because there are only two callers of merge_trees() right now (a git grep for 'merge_trees(' is misleading because builtin/merge-tree.c also defines a 'merge_tree' function that is unrelated), and only one of those is called with buffer_output less than 2 (builtin/checkout.c), but it set opt->verbosity to 0, for which there is only currently one non-error message that would be shown: "Already up to date!". However, that one message can only occur when the merge is utterly trivial (the merge base tree exactly matches the merge tree), and builtin/checkout.c already attempts a trivial merge via unpack_trees() before falling back to merge_trees(). Also, if opt->buffer_output is 2, then the caller is responsible to handle showing any output in opt->obuf and for free'ing it. This requirement might be easy to overlook, so add a comment to merge-recursive.h pointing it out. (There are currently two callers that set buffer_output to 2, both in sequencer.c, and both of which handle this correctly.) Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: comment and reorder the merge_options fieldsLibravatar Elijah Newren1-5/+11
The merge_options struct had lots of fields, making it a little imposing, but the options naturally fall into multiple different groups. Grouping similar options and adding a comment or two makes it easier to read, easier for new folks to figure out which options are related, and thus easier for them to find the options they need. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: consolidate unnecessary fields in merge_optionsLibravatar Elijah Newren1-16/+11
We provided users with the ability to state whether they wanted rename detection, and to put a limit on how much CPU would be spent. Both of these fields had multiple configuration parameters for setting them, with one being a fallback and the other being an override. However, instead of implementing the logic for how to combine the multiple source locations into the appropriate setting at config loading time, we loaded and tracked both values and then made the code combine them every time it wanted to check the overall value. This had a few minor drawbacks: * it seems more complicated than necessary * it runs the risk of people using the independent settings in the future and breaking the intent of how the options are used together * it makes merge_options more complicated than necessary for other potential users of the API Fix these problems by moving the logic for combining the pairs of options into a single value; make it apply at time-of-config-loading instead of each-time-of-use. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: move some definitions around to clean up the headerLibravatar Elijah Newren1-0/+31
No substantive code changes (view this with diff --color-moved), but a few small code cleanups: * Move structs and an inline function only used by merge-recursive.c into merge-recursive.c * Re-order function declarations to be more logical * Add or fix some explanatory comments Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: rename 'mrtree' to 'result_tree', for clarityLibravatar Elijah Newren1-3/+4
It is not at all clear what 'mr' was supposed to stand for, at least not to me. Pick a clearer name for this variable. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: use common name for ancestors/common/base_listLibravatar Elijah Newren1-35/+37
merge_trees(), merge_recursive(), and merge_recursive_generic() in their function headers used four different names for the merge base or list of merge bases they were passed: * 'common' * 'ancestors' * 'ca' * 'base_list' They were able to refer to it four different ways instead of only three by using a different name in the signature for the .c file than the .h file. Change all of these to 'merge_base' or 'merge_bases'. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: fix some overly long linesLibravatar Elijah Newren1-6/+13
No substantive code change, just add some line breaks to fix lines that have grown in length due to various refactorings. Most remaining lines of excessive length in merge-recursive include error messages and it's not clear that splitting those improves things. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19cache-tree: share code between functions writing an index as a treeLibravatar Elijah Newren1-32/+2
write_tree_from_memory() appeared to be a merge-recursive special that basically duplicated write_index_as_tree(). The two have a different signature, but the bigger difference was just that write_index_as_tree() would always unconditionally read the index off of disk instead of working on the current in-memory index. So: * split out common code into write_index_as_tree_internal() * rename write_tree_from_memory() to write_inmemory_index_as_tree(), make it call write_index_as_tree_internal(), and move it to cache-tree.c Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: don't force external callers to do our loggingLibravatar Elijah Newren1-4/+3
Alternatively, you can view this as "make the merge functions behave more similarly." merge-recursive has three different entry points: merge_trees(), merge_recursive(), and merge_recursive_generic(). Two of these would call diff_warn_rename_limit(), but merge_trees() didn't. This lead to callers of merge_trees() needing to manually call diff_warn_rename_limit() themselves. Move this to the new merge_finalize() function to make sure that all three entry points run this function. Note that there are two external callers of merge_trees(), one in sequencer.c and one in builtin/checkout.c. The one in sequencer.c is cleaned up by this patch and just transfers where the call to diff_warn_rename_limit() is made; the one in builtin/checkout.c is for switching to a different commit and in the very rare case where the warning might be triggered, it would probably be helpful to include (e.g. if someone is modifying a file that has been renamed in moving to the other commit, but there are so many renames between the commits that the limit kicks in and none are detected, it may help to have an explanation about why they got a delete/modify conflict instead of a proper content merge in a renamed file). Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: remove useless parameter in merge_trees()Libravatar Elijah Newren1-3/+3
merge_trees() took a results parameter that would only be written when opt->call_depth was positive, which is never the case now that merge_trees_internal() has been split from merge_trees(). Remove the misleading and unused parameter from merge_trees(). While at it, add some comments explaining how the output of merge_trees() and merge_recursive() differ. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: exit early if index != headLibravatar Elijah Newren1-29/+72
We had a rule to enforce that the index matches head, but it was found at the beginning of merge_trees() and would only trigger when opt->call_depth was 0. Since merge_recursive() doesn't call merge_trees() until after returning from recursing, this meant that the check wasn't triggered by merge_recursive() until it had first finished all the intermediate merges to create virtual merge bases. That is a potentially huge amount of computation (and writing of intermediate merge results into the .git/objects directory) before it errors out and says, in effect, "Sorry, I can't do any merging because you have some local changes that would be overwritten." Further, not enforcing this requirement earlier allowed other bugs (such as an unintentional unconditional dropping and reloading of the index in merge_recursive() even when no recursion was necessary), to mask bugs in other callers (which were fixed in the commit prior to this one). Make sure we do the index == head check at the beginning of the merge, and error out immediately if it fails. While we're at it, fix a small leak in the show-the-error codepath. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19merge-recursive: remove another implicit dependency on the_repositoryLibravatar Elijah Newren1-2/+5
Commit d7cf3a96e9a0 ("merge-recursive.c: remove implicit dependency on the_repository", 2019-01-12) and follow-ups like commit 34e7771bc644 ("Use the right 'struct repository' instead of the_repository", 2019-06-27), removed most implicit uses of the_repository. Convert calls to get_commit_tree() to instead use repo_get_commit_tree() to get rid of another. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>