summaryrefslogtreecommitdiff
path: root/ll-merge.c
AgeCommit message (Collapse)AuthorFilesLines
2018-08-13attr: remove an implicit dependency on the_indexLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Make the attr API take an index_state instead of assuming the_index in attr code. All call sites are converted blindly to keep the patch simple and retain current behavior. Individual call sites may receive further updates to use the right index instead of the_index. There is one ugly temporary workaround added in attr.c that needs some more explanation. Commit c24f3abace (apply: file commited with CRLF should roundtrip diff and apply - 2017-08-19) forces one convert_to_git() call to NOT read the index at all. But what do you know, we read it anyway by falling back to the_index. When "istate" from convert_to_git is now propagated down to read_attr_from_array() we will hit segfault somewhere inside read_blob_data_from_index. The right way of dealing with this is to kill "use_index" variable and only follow "istate" but at this stage we are not ready for that: while most git_attr_set_direction() calls just passes the_index to be assigned to use_index, unpack-trees passes a different one which is used by entry.c code, which has no way to know what index to use if we delete use_index. So this has to be done later. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-14avoid "write_in_full(fd, buf, len) != len" patternLibravatar Jeff King1-1/+1
The return value of write_in_full() is either "-1", or the requested number of bytes[1]. If we make a partial write before seeing an error, we still return -1, not a partial value. This goes back to f6aa66cb95 (write_in_full: really write in full or return error on disk full., 2007-01-11). So checking anything except "was the return value negative" is pointless. And there are a couple of reasons not to do so: 1. It can do a funny signed/unsigned comparison. If your "len" is signed (e.g., a size_t) then the compiler will promote the "-1" to its unsigned variant. This works out for "!= len" (unless you really were trying to write the maximum size_t bytes), but is a bug if you check "< len" (an example of which was fixed recently in config.c). We should avoid promoting the mental model that you need to check the length at all, so that new sites are not tempted to copy us. 2. Checking for a negative value is shorter to type, especially when the length is an expression. 3. Linus says so. In d34cf19b89 (Clean up write_in_full() users, 2007-01-11), right after the write_in_full() semantics were changed, he wrote: I really wish every "write_in_full()" user would just check against "<0" now, but this fixes the nasty and stupid ones. Appeals to authority aside, this makes it clear that writing it this way does not have an intentional benefit. It's a historical curiosity that we never bothered to clean up (and which was undoubtedly cargo-culted into new sites). So let's convert these obviously-correct cases (this includes write_str_in_full(), which is just a wrapper for write_in_full()). [1] A careful reader may notice there is one way that write_in_full() can return a different value. If we ask write() to write N bytes and get a return value that is _larger_ than N, we could return a larger total. But besides the fact that this would imply a totally broken version of write(), it would already invoke undefined behavior. Our internal remaining counter is an unsigned size_t, which means that subtracting too many byte will wrap it around to a very large number. So we'll instantly begin reading off the end of the buffer, trying to write gigabytes (or petabytes) of data. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-24Merge branch 'ab/free-and-null'Libravatar Junio C Hamano1-2/+1
A common pattern to free a piece of memory and assign NULL to the pointer that used to point at it has been replaced with a new FREE_AND_NULL() macro. * ab/free-and-null: *.[ch] refactoring: make use of the FREE_AND_NULL() macro coccinelle: make use of the "expression" FREE_AND_NULL() rule coccinelle: add a rule to make "expression" code use FREE_AND_NULL() coccinelle: make use of the "type" FREE_AND_NULL() rule coccinelle: add a rule to make "type" code use FREE_AND_NULL() git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
2017-06-24Merge branch 'bw/config-h'Libravatar Junio C Hamano1-0/+1
Fix configuration codepath to pay proper attention to commondir that is used in multi-worktree situation, and isolate config API into its own header file. * bw/config-h: config: don't implicitly use gitdir or commondir config: respect commondir setup: teach discover_git_directory to respect the commondir config: don't include config.h by default config: remove git_config_iter config: create config.h
2017-06-16coccinelle: make use of the "expression" FREE_AND_NULL() ruleLibravatar Ævar Arnfjörð Bjarmason1-2/+1
A follow-up to the existing "expression" rule added in an earlier change. This manually excludes a few occurrences, mostly things that resulted in many FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent change. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15config: don't include config.h by defaultLibravatar Brandon Williams1-0/+1
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-13convert: convert renormalize_buffer to take an indexLibravatar Brandon Williams1-1/+1
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-01attr: convert git_check_attrs() callers to use the new APILibravatar Junio C Hamano1-19/+14
The remaining callers are all simple "I have N attributes I am interested in. I'll ask about them with various paths one by one". After this step, no caller to git_check_attrs() remains. After removing it, we can extend "struct attr_check" struct with data that can be used in optimizing the query for the specific N attributes it contains. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-01attr: rename function and struct related to checking attributesLibravatar Junio C Hamano1-5/+5
The traditional API to check attributes is to prepare an N-element array of "struct git_attr_check" and pass N and the array to the function "git_check_attr()" as arguments. In preparation to revamp the API to pass a single structure, in which these N elements are held, rename the type used for these individual array elements to "struct attr_check_item" and rename the function to "git_check_attrs()". Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-17Merge branch 'jc/ll-merge-internal'Libravatar Junio C Hamano1-3/+9
"git rerere" can get confused by conflict markers deliberately left by the inner merge step, because they are indistinguishable from the real conflict markers left by the outermost merge which are what the end user and "rerere" need to look at. This was fixed by making the conflict markers left by the inner merges a bit longer. * jc/ll-merge-internal: t6036: remove pointless test that expects failure ll-merge: use a longer conflict marker for internal merge ll-merge: fix typo in comment
2016-05-09ll-merge: use a longer conflict marker for internal mergeLibravatar Junio C Hamano1-2/+6
The primary use of conflict markers is to help the user who resolves the final (outer) merge by hand to show which part came from which branch by separating the blocks of lines apart. When the conflicted parts from a "virtual ancestor" merge created by merge-recursive remains in the common ancestor part in the final result, however, the conflict markers that are the same size as the final merge become harder to see. Increase the conflict marker size slightly for these inner merges so that the markers from the final merge and cruft from internal merge can be distinguished more easily. This would help reduce the common issue that prevents "rerere" from being used on a really complex conflict. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-14ll-merge: fix typo in commentLibravatar Junio C Hamano1-1/+3
When a944af1d (merge: teach -Xours/-Xtheirs to binary ll-merge driver, 2012-09-08) introduced FAVOR_OURS/FAVOR_THEIRS to the binary ll-merge driver, it changed what happens to the merge result for the outer merge, and updated the comment from: The tentative merge result is "ours" for the final round, or common ancestor for an internal merge. Still return "conflicted merge" status. to The tentative merge result is the or common ancestor for an internal merge. What happened is obvious. I noticed the lack of definitive article in front of "common" but failed to remove "or". Also I forgot to describe what I did for the final merge, probably because I was satisified by the description in the log message. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22use xmallocz to avoid size arithmeticLibravatar Jeff King1-1/+1
We frequently allocate strings as xmalloc(len + 1), where the extra 1 is for the NUL terminator. This can be done more simply with xmallocz, which also checks for integer overflow. There's no case where switching xmalloc(n+1) to xmallocz(n) is wrong; the result is the same length, and malloc made no guarantees about what was in the buffer anyway. But in some cases, we can stop manually placing NUL at the end of the allocated buffer. But that's only safe if it's clear that the contents will always fill the buffer. In each case where this patch does so, I manually examined the control flow, and I tried to err on the side of caution. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-20Merge branch 'jk/war-on-sprintf'Libravatar Junio C Hamano1-6/+6
Many allocations that is manually counted (correctly) that are followed by strcpy/sprintf have been replaced with a less error prone constructs such as xstrfmt. Macintosh-specific breakage was noticed and corrected in this reroll. * jk/war-on-sprintf: (70 commits) name-rev: use strip_suffix to avoid magic numbers use strbuf_complete to conditionally append slash fsck: use for_each_loose_file_in_objdir Makefile: drop D_INO_IN_DIRENT build knob fsck: drop inode-sorting code convert strncpy to memcpy notes: document length of fanout path with a constant color: add color_set helper for copying raw colors prefer memcpy to strcpy help: clean up kfmclient munging receive-pack: simplify keep_arg computation avoid sprintf and strcpy with flex arrays use alloc_ref rather than hand-allocating "struct ref" color: add overflow checks for parsing colors drop strcpy in favor of raw sha1_to_hex use sha1_to_hex_r() instead of strcpy daemon: use cld->env_array when re-spawning stat_tracking_info: convert to argv_array http-push: use an argv_array for setup_revisions fetch-pack: use argv_array for index-pack / unpack-objects ...
2015-09-28Sync with 2.4.10Libravatar Junio C Hamano1-1/+4
2015-09-28xdiff: reject files larger than ~1GBLibravatar Jeff King1-1/+4
The xdiff code is not prepared to handle extremely large files. It uses "int" in many places, which can overflow if we have a very large number of lines or even bytes in our input files. This can cause us to produce incorrect diffs, with no indication that the output is wrong. Or worse, we may even underallocate a buffer whose size is the result of an overflowing addition. We're much better off to tell the user that we cannot diff or merge such a large file. This patch covers both cases, but in slightly different ways: 1. For merging, we notice the large file and cleanly fall back to a binary merge (which is effectively "we cannot merge this"). 2. For diffing, we make the binary/text distinction much earlier, and in many different places. For this case, we'll use the xdi_diff as our choke point, and reject any diff there before it hits the xdiff code. This means in most cases we'll die() immediately after. That's not ideal, but in practice we shouldn't generally hit this code path unless the user is trying to do something tricky. We already consider files larger than core.bigfilethreshold to be binary, so this code would only kick in when that is circumvented (either by bumping that value, or by using a .gitattribute to mark a file as diffable). In other words, we can avoid being "nice" here, because there is already nice code that tries to do the right thing. We are adding the suspenders to the nice code's belt, so notice when it has been worked around (both to protect the user from malicious inputs, and because it is better to die() than generate bogus output). The maximum size was chosen after experimenting with feeding large files to the xdiff code. It's just under a gigabyte, which leaves room for two obvious cases: - a diff3 merge conflict result on files of maximum size X could be 3*X plus the size of the markers, which would still be only about 3G, which fits in a 32-bit int. - some of the diff code allocates arrays of one int per record. Even if each file consists only of blank lines, then a file smaller than 1G will have fewer than 1G records, and therefore the int array will fit in 4G. Since the limit is arbitrary anyway, I chose to go under a gigabyte, to leave a safety margin (e.g., we would not want to overflow by allocating "(records + 1) * sizeof(int)" or similar. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25convert trivial sprintf / strcpy calls to xsnprintfLibravatar Jeff King1-6/+6
We sometimes sprintf into fixed-size buffers when we know that the buffer is large enough to fit the input (either because it's a constant, or because it's numeric input that is bounded in size). Likewise with strcpy of constant strings. However, these sites make it hard to audit sprintf and strcpy calls for buffer overflows, as a reader has to cross-reference the size of the array with the input. Let's use xsnprintf instead, which communicates to a reader that we don't expect this to overflow (and catches the mistake in case we do). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-04ll-merge: pass the original path to external driversLibravatar Junio C Hamano1-2/+8
The interface to custom low-level merge driver was modeled to be capable of driving programs like "merge" (from the RCS suite) that can produce result solely by looking at three files that hold contents of common ancestor, ours and theirs. The information we feed to the external drivers via the command line placeholders %O, %A, and %B were designed to be purely about contents by giving names of the temporary files that hold these variants without exposing the original pathname. No matter where the result goes, merging the same three variants should produce the same result, contents is the king, that is the Git way. The external driver interface, however, is meant to help people to step outside the Git worldview, and sometimes people want to know the final path that the resulting merged contents would be stored in. Expose this to the external drivers via a new placeholder %P. Requested-by: Andreas Gondek Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-13ll-merge.c: refactor `read_merge_config()` to use `git_config_string()`Libravatar Tanay Abhra1-17/+6
There is one slight behavior change, previously "merge.default" silently ignored a NULL value and didn't raise any error. But, in the same function, all other values raise an error on a NULL value. So to conform with other call sites in Git, a NULL value for "merge.default" raises an error. The the new config-set API is not very useful here, because much of the function is dedicated to processing "merge.<name>.variable", which the new API does not handle well. If it were for variables like, "merge.summary", "merge.tool", and "merge.verbosity", we could use the new API. Signed-off-by: Tanay Abhra <tanayabh@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23convert some config callbacks to parse_config_keyLibravatar Jeff King1-9/+5
These callers can drop some inline pointer arithmetic and magic offset constants, making them more readable and less error-prone (those constants had to match the lengths of strings, but there is no automatic verification of that fact). The "ep" pointer (presumably for "end pointer"), which points to the final key segment of the config variable, is given the more standard name "key" to describe its function rather than its derivation. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-14Merge branch 'jc/ll-merge-binary-ours'Libravatar Junio C Hamano1-8/+24
"git merge -Xtheirs" did not help content-level merge of binary files; it should just take their version. Also "*.jpg binary" in the attributes did not imply they should use the binary ll-merge driver. * jc/ll-merge-binary-ours: ll-merge: warn about inability to merge binary files only when we can't attr: "binary" attribute should choose built-in "binary" merge driver merge: teach -Xours/-Xtheirs to binary ll-merge driver
2012-09-12ll-merge: warn about inability to merge binary files only when we can'tLibravatar Junio C Hamano1-3/+4
When a path being merged is auto detected to be a binary file, we warned "Cannot merge binary files" before switching to activate the binary ll-merge driver. When we are merging with the -Xours/theirs option, however, we know what the "clean" merge result is, and the warning is inappropriate. In addition, when the path is explicitly marked as a binary file, this warning was not issued, even though without -Xours/theirs, we cannot cleanly automerge such a path, which was inconsistent. Move the warning code from ll_xdl_merge() to ll_binary_merge(), and issue the message only when we cannot cleanly automerge. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-08merge: teach -Xours/-Xtheirs to binary ll-merge driverLibravatar Junio C Hamano1-5/+20
The (discouraged) -Xours/-Xtheirs modes of merge are supposed to give a quick and dirty way to come up with a random mixture of cleanly merged parts and punted conflict resolution to take contents from one side in conflicting parts. These options however were only passed down to the low level merge driver for text. Teach the built-in binary merge driver to notice them as well. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-30remove superfluous newlines in error messagesLibravatar Pete Wyckoff1-1/+1
The error handling routines add a newline. Remove the duplicate ones in error messages. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04Rename git_checkattr() to git_check_attr()Libravatar Michael Haggerty1-2/+2
Suggested by: Junio Hamano <gitster@pobox.com> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-15ll-merge: simplify opts == NULL caseLibravatar Jonathan Nieder1-6/+3
As long as sizeof(struct ll_merge_options) is small, there is not much reason not to keep a copy of the default merge options in the BSS section. In return, we get clearer code and one less stack frame in the opts == NULL case. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-26merge-recursive --patienceLibravatar Justin Frankel1-0/+1
Teach the merge-recursive strategy a --patience option to use the "patience diff" algorithm, which tends to improve results when cherry-picking a patch that reorders functions at the same time as refactoring them. To support this, struct merge_options and ll_merge_options gain an xdl_opts member, so programs can use arbitrary xdiff flags (think "XDF_IGNORE_WHITESPACE") in a git-aware merge. git merge and git rebase can be passed the -Xpatience option to use this. [jn: split from --ignore-space patch; with documentation] Signed-off-by: Justin Frankel <justin@cockos.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-26ll-merge: replace flag argument with options structLibravatar Jonathan Nieder1-17/+33
Keeping track of the flag bits is proving more trouble than it's worth. Instead, use a pointer to an options struct like most similar APIs do. Callers with no special requests can pass NULL to request the default options. Cc: Bert Wesarg <bert.wesarg@googlemail.com> Cc: Avery Pennarun <apenwarr@gmail.com> Helped-by: Justin Frankel <justin@cockos.com> Helped-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06ll-merge: let caller decide whether to renormalizeLibravatar Jonathan Nieder1-3/+3
Add a “renormalize” bit to the ll-merge options word so callers can decide on a case-by-case basis whether the merge is likely to have overlapped with a change in smudge/clean rules. This reveals a few commands that have not been taking that situation into account, though it does not fix them. No functional change intended. Cc: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06ll-merge: make flag easier to populateLibravatar Jonathan Nieder1-4/+5
ll_merge() takes its options in a flag word, which has a few advantages: - options flags can be cheaply passed around in registers, while an option struct passed by pointer cannot; - callers can easily pass 0 without trouble for no options, while an option struct passed by value would not allow that. The downside is that code to populate and access the flag word can be somewhat opaque. Mitigate that with a few macros. Cc: Avery Pennarun <apenwarr@gmail.com> Cc: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-02Avoid conflicts when merging branches with mixed normalizationLibravatar Eyvind Bernhardsen1-0/+15
Currently, merging across changes in line ending normalization is painful since files containing CRLF will conflict with normalized files, even if the only difference between the two versions is the line endings. Additionally, any "real" merge conflicts that exist are obscured because every line in the file has a conflict. Assume you start out with a repo that has a lot of text files with CRLF checked in (A): o---C / \ A---B---D B: Add "* text=auto" to .gitattributes and normalize all files to LF-only C: Modify some of the text files D: Try to merge C You will get a ridiculous number of LF/CRLF conflicts when trying to merge C into D, since the repository contents for C are "wrong" wrt the new .gitattributes file. Fix ll-merge so that the "base", "theirs" and "ours" stages are passed through convert_to_worktree() and convert_to_git() before a three-way merge. This ensures that all three stages are normalized in the same way, removing from consideration differences that are only due to normalization. This feature is optional for now since it changes a low-level mechanism and is not necessary for the majority of users. The "merge.renormalize" config variable enables it. Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-31Rewrite dynamic structure initializations to runtime assignmentLibravatar Gary V. Vaughan1-7/+7
Unfortunately, there are still plenty of production systems with vendor compilers that choke unless all compound declarations can be determined statically at compile time, for example hpux10.20 (I can provide a comprehensive list of our supported platforms that exhibit this problem if necessary). This patch simply breaks apart any compound declarations with dynamic initialisation expressions, and moves the initialisation until after the last declaration in the same block, in all the places necessary to have the offending compilers accept the code. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20ll_merge(): add ancestor label parameter for diff3-style outputLibravatar Jonathan Nieder1-9/+11
Commands using the ll_merge() function will present conflict hunks imitating ‘diff3 -m’ output if the merge.conflictstyle configuration option is set appropriately. Unlike ‘diff3 -m’, the output does not include a label for the merge base on the ||||||| line of the output, and some tools misparse the conflict hunks without that. Add a new ancestor_label parameter to ll_merge() to give callers the power to rectify this situation. If ancestor_label is NULL, the output format is unchanged. All callers pass NULL for now. Requested-by: Stefan Monnier <monnier@iro.umontreal.ca> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20xdl_merge(): move file1 and file2 labels to xmparam structureLibravatar Jonathan Nieder1-1/+3
The labels for the three participants in a potential conflict are all optional arguments for the xdiff merge routine; if they are NULL, then xdl_merge() can cope by omitting the labels from its output. Move them to the xmparam structure to allow new callers to save some keystrokes where they are not needed. This also has the virtue of making the xdiff merge interface more similar to merge_trees, which might make it easier to learn. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02refactor merge flags into xmparam_tLibravatar Bert Wesarg1-8/+4
Include the merge level, favor, and style flags into the xmparam_t struct. This removes the bit twiddling with these three values into the one flags parameter. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02make union merge an xdl merge favorLibravatar Bert Wesarg1-38/+5
The current union merge driver is implemented as an post process. But the xdl_merge code is quite capable to produce the result by itself. Therefore move it there. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'jc/conflict-marker-size'Libravatar Junio C Hamano1-28/+53
* jc/conflict-marker-size: rerere: honor conflict-marker-size attribute rerere: prepare for customizable conflict marker length conflict-marker-size: new attribute rerere: use ll_merge() instead of using xdl_merge() merge-tree: use ll_merge() not xdl_merge() xdl_merge(): allow passing down marker_size in xmparam_t xdl_merge(): introduce xmparam_t for merge specific parameters git_attr(): fix function signature Conflicts: builtin-merge-file.c ll-merge.c xdiff/xdiff.h xdiff/xmerge.c
2010-01-20Merge branch 'ap/merge-backend-opts'Libravatar Junio C Hamano1-12/+13
* ap/merge-backend-opts: Document that merge strategies can now take their own options Extend merge-subtree tests to test -Xsubtree=dir. Make "subtree" part more orthogonal to the rest of merge-recursive. pull: Fix parsing of -X<option> Teach git-pull to pass -X<option> to git-merge git merge -X<option> git-merge-file --ours, --theirs Conflicts: git-compat-util.h
2010-01-17git merge -X<option>Libravatar Avery Pennarun1-12/+13
Teach "-X <option>" command line argument to "git merge" that is passed to strategy implementations. "ours" and "theirs" autoresolution introduced by the previous commit can be asked to the recursive strategy. Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-17rerere: honor conflict-marker-size attributeLibravatar Junio C Hamano1-0/+15
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16conflict-marker-size: new attributeLibravatar Junio C Hamano1-25/+34
This can be specified to set the length of the conflict marker (usually 7) to a non-default value per path. Only the callers of ll_merge() that are aware of the per-path attributes are modified. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16xdl_merge(): introduce xmparam_t for merge specific parametersLibravatar Junio C Hamano1-3/+3
So far we have only needed to be able to pass an option that is generic to xdiff family of functions to this function. Extend the interface so that we can give it merge specific parameters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16git_attr(): fix function signatureLibravatar Junio C Hamano1-1/+1
The function took (name, namelen) as its arguments, but all the public callers wanted to pass a full string. Demote the counted-string interface to an internal API status, and allow public callers to just pass the string to the function. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-05run-command: convert simple callsites to use_shellLibravatar Jeff King1-3/+3
Now that we have the use_shell feature, these callsites can all be converted with small changes. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-10Merge branch 'js/run-command-updates'Libravatar Junio C Hamano1-4/+0
* js/run-command-updates: api-run-command.txt: describe error behavior of run_command functions run-command.c: squelch a "use before assignment" warning receive-pack: remove unnecessary run_status report run_command: report failure to execute the program, but optionally don't run_command: encode deadly signal number in the return value run_command: report system call errors instead of returning error codes run_command: return exit code as positive value MinGW: simplify waitpid() emulation macros
2009-07-06Merge branch 'tr/die_errno'Libravatar Junio C Hamano1-1/+1
* tr/die_errno: Use die_errno() instead of die() when checking syscalls Convert existing die(..., strerror(errno)) to die_errno() die_errno(): double % in strerror() output just in case Introduce die_errno() that appends strerror(errno) to die()
2009-07-05run_command: return exit code as positive valueLibravatar Johannes Sixt1-4/+0
As a general guideline, functions in git's code return zero to indicate success and negative values to indicate failure. The run_command family of functions followed this guideline. But there are actually two different kinds of failure: - failures of system calls; - non-zero exit code of the program that was run. Usually, a non-zero exit code of the program is a failure and means a failure to the caller. Except that sometimes it does not. For example, the exit code of merge programs (e.g. external merge drivers) conveys information about how the merge failed, and not all exit calls are actually failures. Furthermore, the return value of run_command is sometimes used as exit code by the caller. This change arranges that the exit code of the program is returned as a positive value, which can now be regarded as the "result" of the function. System call failures continue to be reported as negative values. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01Remove filename from conflict markersLibravatar Martin Renold1-4/+4
Put filenames into the conflict markers only when they are different. Otherwise they are redundant information clutter. Print the filename explicitely when warning about a binary conflict. Signed-off-by: Martin Renold <martinxyz@gmx.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Use die_errno() instead of die() when checking syscallsLibravatar Thomas Rast1-1/+1
Lots of die() calls did not actually report the kind of error, which can leave the user confused as to the real problem. Use die_errno() where we check a system/library call that sets errno on failure, or one of the following that wrap such calls: Function Passes on error from -------- -------------------- odb_pack_keep open read_ancestry fopen read_in_full xread strbuf_read xread strbuf_read_file open or strbuf_read_file strbuf_readlink readlink write_in_full xwrite Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-20Merge branch 'sb/maint-1.6.0-add-config-fix'Libravatar Junio C Hamano1-4/+4
* sb/maint-1.6.0-add-config-fix: add: allow configurations to be overriden by command line use xstrdup, not strdup in ll-merge.c Conflicts: builtin-add.c