summaryrefslogtreecommitdiff
path: root/ll-merge.c
AgeCommit message (Collapse)AuthorFilesLines
2015-09-28Sync with 2.4.10Libravatar Junio C Hamano1-1/+4
2015-09-28xdiff: reject files larger than ~1GBLibravatar Jeff King1-1/+4
The xdiff code is not prepared to handle extremely large files. It uses "int" in many places, which can overflow if we have a very large number of lines or even bytes in our input files. This can cause us to produce incorrect diffs, with no indication that the output is wrong. Or worse, we may even underallocate a buffer whose size is the result of an overflowing addition. We're much better off to tell the user that we cannot diff or merge such a large file. This patch covers both cases, but in slightly different ways: 1. For merging, we notice the large file and cleanly fall back to a binary merge (which is effectively "we cannot merge this"). 2. For diffing, we make the binary/text distinction much earlier, and in many different places. For this case, we'll use the xdi_diff as our choke point, and reject any diff there before it hits the xdiff code. This means in most cases we'll die() immediately after. That's not ideal, but in practice we shouldn't generally hit this code path unless the user is trying to do something tricky. We already consider files larger than core.bigfilethreshold to be binary, so this code would only kick in when that is circumvented (either by bumping that value, or by using a .gitattribute to mark a file as diffable). In other words, we can avoid being "nice" here, because there is already nice code that tries to do the right thing. We are adding the suspenders to the nice code's belt, so notice when it has been worked around (both to protect the user from malicious inputs, and because it is better to die() than generate bogus output). The maximum size was chosen after experimenting with feeding large files to the xdiff code. It's just under a gigabyte, which leaves room for two obvious cases: - a diff3 merge conflict result on files of maximum size X could be 3*X plus the size of the markers, which would still be only about 3G, which fits in a 32-bit int. - some of the diff code allocates arrays of one int per record. Even if each file consists only of blank lines, then a file smaller than 1G will have fewer than 1G records, and therefore the int array will fit in 4G. Since the limit is arbitrary anyway, I chose to go under a gigabyte, to leave a safety margin (e.g., we would not want to overflow by allocating "(records + 1) * sizeof(int)" or similar. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-04ll-merge: pass the original path to external driversLibravatar Junio C Hamano1-2/+8
The interface to custom low-level merge driver was modeled to be capable of driving programs like "merge" (from the RCS suite) that can produce result solely by looking at three files that hold contents of common ancestor, ours and theirs. The information we feed to the external drivers via the command line placeholders %O, %A, and %B were designed to be purely about contents by giving names of the temporary files that hold these variants without exposing the original pathname. No matter where the result goes, merging the same three variants should produce the same result, contents is the king, that is the Git way. The external driver interface, however, is meant to help people to step outside the Git worldview, and sometimes people want to know the final path that the resulting merged contents would be stored in. Expose this to the external drivers via a new placeholder %P. Requested-by: Andreas Gondek Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-13ll-merge.c: refactor `read_merge_config()` to use `git_config_string()`Libravatar Tanay Abhra1-17/+6
There is one slight behavior change, previously "merge.default" silently ignored a NULL value and didn't raise any error. But, in the same function, all other values raise an error on a NULL value. So to conform with other call sites in Git, a NULL value for "merge.default" raises an error. The the new config-set API is not very useful here, because much of the function is dedicated to processing "merge.<name>.variable", which the new API does not handle well. If it were for variables like, "merge.summary", "merge.tool", and "merge.verbosity", we could use the new API. Signed-off-by: Tanay Abhra <tanayabh@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23convert some config callbacks to parse_config_keyLibravatar Jeff King1-9/+5
These callers can drop some inline pointer arithmetic and magic offset constants, making them more readable and less error-prone (those constants had to match the lengths of strings, but there is no automatic verification of that fact). The "ep" pointer (presumably for "end pointer"), which points to the final key segment of the config variable, is given the more standard name "key" to describe its function rather than its derivation. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-14Merge branch 'jc/ll-merge-binary-ours'Libravatar Junio C Hamano1-8/+24
"git merge -Xtheirs" did not help content-level merge of binary files; it should just take their version. Also "*.jpg binary" in the attributes did not imply they should use the binary ll-merge driver. * jc/ll-merge-binary-ours: ll-merge: warn about inability to merge binary files only when we can't attr: "binary" attribute should choose built-in "binary" merge driver merge: teach -Xours/-Xtheirs to binary ll-merge driver
2012-09-12ll-merge: warn about inability to merge binary files only when we can'tLibravatar Junio C Hamano1-3/+4
When a path being merged is auto detected to be a binary file, we warned "Cannot merge binary files" before switching to activate the binary ll-merge driver. When we are merging with the -Xours/theirs option, however, we know what the "clean" merge result is, and the warning is inappropriate. In addition, when the path is explicitly marked as a binary file, this warning was not issued, even though without -Xours/theirs, we cannot cleanly automerge such a path, which was inconsistent. Move the warning code from ll_xdl_merge() to ll_binary_merge(), and issue the message only when we cannot cleanly automerge. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-08merge: teach -Xours/-Xtheirs to binary ll-merge driverLibravatar Junio C Hamano1-5/+20
The (discouraged) -Xours/-Xtheirs modes of merge are supposed to give a quick and dirty way to come up with a random mixture of cleanly merged parts and punted conflict resolution to take contents from one side in conflicting parts. These options however were only passed down to the low level merge driver for text. Teach the built-in binary merge driver to notice them as well. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-30remove superfluous newlines in error messagesLibravatar Pete Wyckoff1-1/+1
The error handling routines add a newline. Remove the duplicate ones in error messages. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04Rename git_checkattr() to git_check_attr()Libravatar Michael Haggerty1-2/+2
Suggested by: Junio Hamano <gitster@pobox.com> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-15ll-merge: simplify opts == NULL caseLibravatar Jonathan Nieder1-6/+3
As long as sizeof(struct ll_merge_options) is small, there is not much reason not to keep a copy of the default merge options in the BSS section. In return, we get clearer code and one less stack frame in the opts == NULL case. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-26merge-recursive --patienceLibravatar Justin Frankel1-0/+1
Teach the merge-recursive strategy a --patience option to use the "patience diff" algorithm, which tends to improve results when cherry-picking a patch that reorders functions at the same time as refactoring them. To support this, struct merge_options and ll_merge_options gain an xdl_opts member, so programs can use arbitrary xdiff flags (think "XDF_IGNORE_WHITESPACE") in a git-aware merge. git merge and git rebase can be passed the -Xpatience option to use this. [jn: split from --ignore-space patch; with documentation] Signed-off-by: Justin Frankel <justin@cockos.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-26ll-merge: replace flag argument with options structLibravatar Jonathan Nieder1-17/+33
Keeping track of the flag bits is proving more trouble than it's worth. Instead, use a pointer to an options struct like most similar APIs do. Callers with no special requests can pass NULL to request the default options. Cc: Bert Wesarg <bert.wesarg@googlemail.com> Cc: Avery Pennarun <apenwarr@gmail.com> Helped-by: Justin Frankel <justin@cockos.com> Helped-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06ll-merge: let caller decide whether to renormalizeLibravatar Jonathan Nieder1-3/+3
Add a “renormalize” bit to the ll-merge options word so callers can decide on a case-by-case basis whether the merge is likely to have overlapped with a change in smudge/clean rules. This reveals a few commands that have not been taking that situation into account, though it does not fix them. No functional change intended. Cc: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06ll-merge: make flag easier to populateLibravatar Jonathan Nieder1-4/+5
ll_merge() takes its options in a flag word, which has a few advantages: - options flags can be cheaply passed around in registers, while an option struct passed by pointer cannot; - callers can easily pass 0 without trouble for no options, while an option struct passed by value would not allow that. The downside is that code to populate and access the flag word can be somewhat opaque. Mitigate that with a few macros. Cc: Avery Pennarun <apenwarr@gmail.com> Cc: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-02Avoid conflicts when merging branches with mixed normalizationLibravatar Eyvind Bernhardsen1-0/+15
Currently, merging across changes in line ending normalization is painful since files containing CRLF will conflict with normalized files, even if the only difference between the two versions is the line endings. Additionally, any "real" merge conflicts that exist are obscured because every line in the file has a conflict. Assume you start out with a repo that has a lot of text files with CRLF checked in (A): o---C / \ A---B---D B: Add "* text=auto" to .gitattributes and normalize all files to LF-only C: Modify some of the text files D: Try to merge C You will get a ridiculous number of LF/CRLF conflicts when trying to merge C into D, since the repository contents for C are "wrong" wrt the new .gitattributes file. Fix ll-merge so that the "base", "theirs" and "ours" stages are passed through convert_to_worktree() and convert_to_git() before a three-way merge. This ensures that all three stages are normalized in the same way, removing from consideration differences that are only due to normalization. This feature is optional for now since it changes a low-level mechanism and is not necessary for the majority of users. The "merge.renormalize" config variable enables it. Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-31Rewrite dynamic structure initializations to runtime assignmentLibravatar Gary V. Vaughan1-7/+7
Unfortunately, there are still plenty of production systems with vendor compilers that choke unless all compound declarations can be determined statically at compile time, for example hpux10.20 (I can provide a comprehensive list of our supported platforms that exhibit this problem if necessary). This patch simply breaks apart any compound declarations with dynamic initialisation expressions, and moves the initialisation until after the last declaration in the same block, in all the places necessary to have the offending compilers accept the code. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20ll_merge(): add ancestor label parameter for diff3-style outputLibravatar Jonathan Nieder1-9/+11
Commands using the ll_merge() function will present conflict hunks imitating ‘diff3 -m’ output if the merge.conflictstyle configuration option is set appropriately. Unlike ‘diff3 -m’, the output does not include a label for the merge base on the ||||||| line of the output, and some tools misparse the conflict hunks without that. Add a new ancestor_label parameter to ll_merge() to give callers the power to rectify this situation. If ancestor_label is NULL, the output format is unchanged. All callers pass NULL for now. Requested-by: Stefan Monnier <monnier@iro.umontreal.ca> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20xdl_merge(): move file1 and file2 labels to xmparam structureLibravatar Jonathan Nieder1-1/+3
The labels for the three participants in a potential conflict are all optional arguments for the xdiff merge routine; if they are NULL, then xdl_merge() can cope by omitting the labels from its output. Move them to the xmparam structure to allow new callers to save some keystrokes where they are not needed. This also has the virtue of making the xdiff merge interface more similar to merge_trees, which might make it easier to learn. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02refactor merge flags into xmparam_tLibravatar Bert Wesarg1-8/+4
Include the merge level, favor, and style flags into the xmparam_t struct. This removes the bit twiddling with these three values into the one flags parameter. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02make union merge an xdl merge favorLibravatar Bert Wesarg1-38/+5
The current union merge driver is implemented as an post process. But the xdl_merge code is quite capable to produce the result by itself. Therefore move it there. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'jc/conflict-marker-size'Libravatar Junio C Hamano1-28/+53
* jc/conflict-marker-size: rerere: honor conflict-marker-size attribute rerere: prepare for customizable conflict marker length conflict-marker-size: new attribute rerere: use ll_merge() instead of using xdl_merge() merge-tree: use ll_merge() not xdl_merge() xdl_merge(): allow passing down marker_size in xmparam_t xdl_merge(): introduce xmparam_t for merge specific parameters git_attr(): fix function signature Conflicts: builtin-merge-file.c ll-merge.c xdiff/xdiff.h xdiff/xmerge.c
2010-01-20Merge branch 'ap/merge-backend-opts'Libravatar Junio C Hamano1-12/+13
* ap/merge-backend-opts: Document that merge strategies can now take their own options Extend merge-subtree tests to test -Xsubtree=dir. Make "subtree" part more orthogonal to the rest of merge-recursive. pull: Fix parsing of -X<option> Teach git-pull to pass -X<option> to git-merge git merge -X<option> git-merge-file --ours, --theirs Conflicts: git-compat-util.h
2010-01-17git merge -X<option>Libravatar Avery Pennarun1-12/+13
Teach "-X <option>" command line argument to "git merge" that is passed to strategy implementations. "ours" and "theirs" autoresolution introduced by the previous commit can be asked to the recursive strategy. Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-17rerere: honor conflict-marker-size attributeLibravatar Junio C Hamano1-0/+15
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16conflict-marker-size: new attributeLibravatar Junio C Hamano1-25/+34
This can be specified to set the length of the conflict marker (usually 7) to a non-default value per path. Only the callers of ll_merge() that are aware of the per-path attributes are modified. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16xdl_merge(): introduce xmparam_t for merge specific parametersLibravatar Junio C Hamano1-3/+3
So far we have only needed to be able to pass an option that is generic to xdiff family of functions to this function. Extend the interface so that we can give it merge specific parameters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16git_attr(): fix function signatureLibravatar Junio C Hamano1-1/+1
The function took (name, namelen) as its arguments, but all the public callers wanted to pass a full string. Demote the counted-string interface to an internal API status, and allow public callers to just pass the string to the function. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-05run-command: convert simple callsites to use_shellLibravatar Jeff King1-3/+3
Now that we have the use_shell feature, these callsites can all be converted with small changes. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-10Merge branch 'js/run-command-updates'Libravatar Junio C Hamano1-4/+0
* js/run-command-updates: api-run-command.txt: describe error behavior of run_command functions run-command.c: squelch a "use before assignment" warning receive-pack: remove unnecessary run_status report run_command: report failure to execute the program, but optionally don't run_command: encode deadly signal number in the return value run_command: report system call errors instead of returning error codes run_command: return exit code as positive value MinGW: simplify waitpid() emulation macros
2009-07-06Merge branch 'tr/die_errno'Libravatar Junio C Hamano1-1/+1
* tr/die_errno: Use die_errno() instead of die() when checking syscalls Convert existing die(..., strerror(errno)) to die_errno() die_errno(): double % in strerror() output just in case Introduce die_errno() that appends strerror(errno) to die()
2009-07-05run_command: return exit code as positive valueLibravatar Johannes Sixt1-4/+0
As a general guideline, functions in git's code return zero to indicate success and negative values to indicate failure. The run_command family of functions followed this guideline. But there are actually two different kinds of failure: - failures of system calls; - non-zero exit code of the program that was run. Usually, a non-zero exit code of the program is a failure and means a failure to the caller. Except that sometimes it does not. For example, the exit code of merge programs (e.g. external merge drivers) conveys information about how the merge failed, and not all exit calls are actually failures. Furthermore, the return value of run_command is sometimes used as exit code by the caller. This change arranges that the exit code of the program is returned as a positive value, which can now be regarded as the "result" of the function. System call failures continue to be reported as negative values. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01Remove filename from conflict markersLibravatar Martin Renold1-4/+4
Put filenames into the conflict markers only when they are different. Otherwise they are redundant information clutter. Print the filename explicitely when warning about a binary conflict. Signed-off-by: Martin Renold <martinxyz@gmx.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Use die_errno() instead of die() when checking syscallsLibravatar Thomas Rast1-1/+1
Lots of die() calls did not actually report the kind of error, which can leave the user confused as to the real problem. Use die_errno() where we check a system/library call that sets errno on failure, or one of the following that wrap such calls: Function Passes on error from -------- -------------------- odb_pack_keep open read_ancestry fopen read_in_full xread strbuf_read xread strbuf_read_file open or strbuf_read_file strbuf_readlink readlink write_in_full xwrite Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-20Merge branch 'sb/maint-1.6.0-add-config-fix'Libravatar Junio C Hamano1-4/+4
* sb/maint-1.6.0-add-config-fix: add: allow configurations to be overriden by command line use xstrdup, not strdup in ll-merge.c Conflicts: builtin-add.c
2009-06-14use xstrdup, not strdup in ll-merge.cLibravatar Jim Meyering1-4/+4
Otherwise, a fluky allocation failure would cause merge configuration settings to be silently ignored. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-09Simplify some instances of run_command() by using run_command_v_opt().Libravatar Johannes Sixt1-9/+2
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-29replace direct calls to unlink(2) with unlink_or_warnLibravatar Alex Riesen1-1/+1
This helps to notice when something's going wrong, especially on systems which lock open files. I used the following criteria when selecting the code for replacement: - it was already printing a warning for the unlink failures - it is in a function which already printing something or is called from such a function - it is in a static function, returning void and the function is only called from a builtin main function (cmd_) - it is in a function which handles emergency exit (signal handlers) - it is in a function which is obvously cleaning up the lockfiles Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-23merge-recursive: use strbuf_expand() instead of interpolate()Libravatar René Scharfe1-12/+9
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-30git-merge-recursive: learn to honor merge.conflictstyleLibravatar Junio C Hamano1-5/+13
This teaches the low-level ll_xdl_merge() routine to honor merge.conflictstyle configuration variable, so that merge-recursive strategy can show the conflicts in the style of user's choice. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-14Provide git_config with a callback-data parameterLibravatar Johannes Schindelin1-2/+2
git_config() only had a function parameter, but no callback data parameter. This assumes that all callback functions only modify global variables. With this patch, every callback gets a void * parameter, and it is hoped that this will help the libification effort. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-18merge-recursive: split low-level merge functions out.Libravatar Junio C Hamano1-0/+379
This moves low-level merge functions out of merge-recursive.c and places them in a new separate file, ll-merge.c Signed-off-by: Junio C Hamano <gitster@pobox.com>