| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The procedure [mc ...] will translate the strings through msgcat.
Strings must be enclosed in quotes, not in braces, because otherwise
xgettext cannot extract them properly, although on the Tcl side both
delimiters would work fine.
[jes: I merged the later patches to that end.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Earlier when I rewrote the merge implementation for git-gui I broke
it such that the conflict markers for the "theirs" side of the hunk
was using a full SHA-1 ID in hex, rather than the name of the branch
the user had merged. This was because I got paranoid and passed off
the full SHA-1 to git-merge, instead of giving it the reference name
the user saw in the merge dialog.
I'd still like to resolve the SHA-1 upfront in git-gui and always use
that value throughout the merge, but I can't do that until we have a
full implementation of git-merge written in Tcl. Until then its more
important that the conflict markers be useful to the end-user, so we
need to pass off the ref name and not the SHA-1 ID.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This is just a small code movement to cleanup how we generate
the command line for a merge. I'm only doing it to make the
next series of changes slightly more readable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Resetting a large number of files on a slow filesystem can take
considerable time, just as switching branches in such a case can
take more than two seconds. We now take advantage of the progress
meter output by read-tree and show it in the main window status
bar, just like we do during checkout (branch switch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Also, the warning message when clicking "Reset" is adapted to
the wording "Reset" rather than a confusion "Cancel commit?".
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we are being asked to merge a tracking branch that comes from a
remote repository accessed by the very common SSH URL format of
"user@host:/path/to/repo" then we really don't need the username
as part of the merge message, it only clutters up the history and
makes things more confusing. So we instead clip the username part
off if the local filesystem path is absolute, as its probably not
going to be an ambiguous URL even when it is missing the username.
On the other hand we cannot clip the username off if the URL is
not absolute, because in such cases (e.g. "user@host:myrepo") the
directory that the repository path is resolved in is relative to
the user's home directory, and the username becomes important.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we are merging a tracking branch we know exactly what remote URL
that branch is fetched from, and what its name is on that remote
repository. In this case we can setup a merge message that looks
just like a standard `git-pull $remote $branch` operation by filling
out FETCH_HEAD before we start git-merge, and then run git-merge just
like git-pull does.
I think the result of this behavior is that merges look a lot nicer
when the came off of local tracking branches, because they no longer
say "commit 'origin/...'" to describe the commit being merged but
instead now mention the specific repository we fetched those commits
from.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Misc. code cleanups in the merge dialog's binding setup and action
button creation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Now that we only support merging one branch we can offer the user
a better user interface experience by allowing them to select the
revision they want to merge through our revision picking widget.
This change neatly solves the problem of locating a branch out of
a sea of 200 tracking branches, and of dealing with very long branch
names that all have a common prefix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I'm working on refactoring the UI of the merge dialog, because as it
currently stands the dialog is absolutely horrible, especially when
you have 200+ branches available from a single remote system.
In that refactoring I plan on using the choose_rev widget to allow
the user to select exactly which branch/commit they want to merge.
However since that only selects a single commit I'm first removing
the code that supports octopus merges.
A brief consultation on #git tonight seemed to indicate that the
octopus merge strategy is not as useful as originally thought when
it was invented, and that most people don't commonly use them. So
making users fall back to the command line to create an octopus is
actually maybe a good idea here, as they might think twice before
they use it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I've found that the class code makes it a whole lot easier to create
more complex GUI code, especially the dialogs. So before I make any
major improvements to the merge dialog's interface I'm going to first
switch it to use the class system, so the code is slightly cleaner.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Rather than making the C library search for git every time we want
to execute it we now search for the main git wrapper at startup, do
symlink resolution, and then always use the absolute path that we
found to execute the binary later on. This should save us some
cycles, especially on stat challenged systems like Cygwin/Win32.
While I was working on this change I also converted all of our
existing pipes ([open "| git ..."]) to use two new pipe wrapper
functions. These functions take additional options like --nice
and --stderr which instructs Tcl to take special action, like
running the underlying git program through `nice` (if available)
or redirect stderr to stdout for capture in Tcl.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I'm really starting to dislike global variables. The ui_status_value
global varible is just one of those that seems to appear in a lot of
code and in many cases we didn't even declare it "global" within the
proc that updates it so we haven't always been getting all of the
updates we expected to see.
This change introduces two new global procs:
ui_status $msg; # Sets the status bar to show $msg.
ui_ready; # Changes the status bar to show "Ready."
The second (special) form is used because we often update the area
with this message once we are done processing a block of work and
want the user to know we have completed it.
I'm not fixing the cases that appear in lib/branch.tcl right now
as I'm actually in the middle of a huge refactoring of that code
to support making a detached HEAD checkout.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Pressing the escape key while in the merge dialog cancels the merge
and correctly unlocks the index. Unfortunately this is not true of
the Cancel button, using it closes the dialog but does not release
the index lock, rendering git-gui frozen until you restart it. We
now properly release the index lock when the Cancel button is used.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Because Tk does not assure us the order that it will process
children in before it destroys the main toplevel we cannot safely
save our geometry data during a "bind . <Destroy>" event binding.
The geometry may have already changed as a result of a one or
more children being removed from the layout. This was pointed
out in gitk by Mark Levedahl, and patched over there by commit
b6047c5a8166a71e01c6b63ebbb67c6894d95114.
So we now also use "wm protocol . WM_DELETE_WINDOW" to detect when
the window is closed by the user, and forward that close event to
our main do_quit routine.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Now that we have a slightly easier method of working with per-widget
data we should make use of that technique in our browser and console
meta-widgets, as both have a decent amount of information that they
store on a per-widget basis and our current approach of handling
it is difficult to follow.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I found it useful to be able to use j/k (vi-like keys) to move
up and down the list of branches to merge and shift-j/k to do
the selection, much as shift-up/down (arrow keys) would alter
the selection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Since we support vi-like keys for scrolling in other UI contexts
we can easily do so here too. Tk's handy little `event generate'
makes this a lot easier than I thought it would be. We may want
to go back and fix some of the other vi-like bindings to redirect
to the arrow and pageup/pagedown keys, rather than running the
view changes directly.
I've bound 'v' to visualize, as this is a somewhat common thing
to want to do in the merge dialog. Control (or Command) Return
is also bound to start the merge, much as it is bound in the
main window to activate the commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When merging branches using our local merge feature it can be
handy to know the first few digits of the commit the ref points
at as well as the short description of the branch name.
Unfortunately I'm unable to use three listboxes in a row, as Tcl
freaks out and refuses to let me have a selection in more than
one of them at any given point in time. So instead we use a
fixed width font in the existing listbox and organize the data
into three columns. Not nearly as nice looking, but users can
continue to use the listbox's features.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Johannes Sixt pointed out that git-gui was randomly selecting
which branch (or tag!) it will show in the merge dialog when
more than one ref points at the same commit. This can be a
problem for the user if they want to merge a branch, but the
ref that git-gui selected to display was actually a tag that
points at the commit at the tip of that branch. Since the
user is looking for the branch, and not the tag, its confusing
to not find it, and worse, merging the tag causes git-merge to
generate a different message than if the branch was selected.
While I am in here and am messing around I have changed the
for-each-ref usage to take advantage of its --tcl formatting,
and to fetch the subject line of the commit (or tag) we are
looking at. This way we could present the subject line in the
UI to the user, given them an even better chance to select
the correct branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Like the console procs I have moved the code related to merge
support into their own namespace, so that they are isolated
from the rest of the world.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
To help modularize git-gui better I'm isolating the code and
variables required to handle our little console windows into
their own namespace. This way we can say console::new rather
than new_console, and the hidden internal procs to create the
window and read data from our filehandle are off in their own
private little land, where most users don't see them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I'm finding it difficult to work with a 6,000+ line Tcl script
and not go insane while looking for a particular block of code.
Since most of the program is organized into different units of
functionality and not all users will need all units immediately
on startup we can improve things by splitting procs out into
multiple files and let auto_load handle things for us.
This should help not only to better organize the source, but
it may also improve startup times for some users as the Tcl
parser does not need to read as much script before it can show
the UI. In many cases the user can avoid reading at least half
of git-gui now.
Unfortunately we now need a library directory in our runtime
location. This is currently assumed to be $(sharedir)/git-gui/lib
and its expected that the Makefile invoker will setup some sort of
reasonable sharedir value for us, or let us assume its going to be
$(gitexecdir)/../share.
We now also require a tclsh (in TCL_PATH) to just run the Makefile,
as we use tclsh to generate the tclIndex for our lib directory. I'm
hoping this is not an unncessary burden on end-users who are building
from source.
I haven't really made any functionality changes here, this is just a
huge migration of code from one file to many smaller files. All of
the new changes are to setup the library path and install the library
files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Christian Stimming
Shawn O. Pearce
Christian Stimming